diff mbox series

[v7,2/2] certs: Add support for using elliptic curve keys for signing modules

Message ID 20210628214304.4165769-3-stefanb@linux.vnet.ibm.com (mailing list archive)
State New, archived
Headers show
Series Add support for ECDSA-signed kernel modules | expand

Commit Message

Stefan Berger June 28, 2021, 9:43 p.m. UTC
From: Stefan Berger <stefanb@linux.ibm.com>

Add support for using elliptic curve keys for signing modules. It uses
a NIST P384 (secp384r1) key if the user chooses an elliptic curve key
and will have ECDSA support built into the kernel.

Note: A developer choosing an ECDSA key for signing modules should still
delete the signing key (rm certs/signing_key.*) when building an older
version of a kernel that only supports RSA keys. Unless kbuild automati-
cally detects and generates a new kernel module key, ECDSA-signed kernel
modules will fail signature verification.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
---
 certs/Kconfig                         | 26 ++++++++++++++++++++++++++
 certs/Makefile                        | 13 +++++++++++++
 crypto/asymmetric_keys/pkcs7_parser.c |  8 ++++++++
 3 files changed, 47 insertions(+)

Comments

Jarkko Sakkinen June 29, 2021, 8:56 p.m. UTC | #1
On Mon, Jun 28, 2021 at 05:43:04PM -0400, Stefan Berger wrote:
> From: Stefan Berger <stefanb@linux.ibm.com>
> 
> Add support for using elliptic curve keys for signing modules. It uses
> a NIST P384 (secp384r1) key if the user chooses an elliptic curve key
> and will have ECDSA support built into the kernel.
> 
> Note: A developer choosing an ECDSA key for signing modules should still
> delete the signing key (rm certs/signing_key.*) when building an older
> version of a kernel that only supports RSA keys. Unless kbuild automati-
> cally detects and generates a new kernel module key, ECDSA-signed kernel
> modules will fail signature verification.
> 
> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
> Cc: David Howells <dhowells@redhat.com>
> Cc: David Woodhouse <dwmw2@infradead.org>
> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
> ---

When you change the patches, you should remove all reviewed-by etc.
tags. Also, move Cc-tags before your sob.

/Jarkko

>  certs/Kconfig                         | 26 ++++++++++++++++++++++++++
>  certs/Makefile                        | 13 +++++++++++++
>  crypto/asymmetric_keys/pkcs7_parser.c |  8 ++++++++
>  3 files changed, 47 insertions(+)
> 
> diff --git a/certs/Kconfig b/certs/Kconfig
> index f4e61116f94e..916cbb1af928 100644
> --- a/certs/Kconfig
> +++ b/certs/Kconfig
> @@ -15,6 +15,32 @@ config MODULE_SIG_KEY
>           then the kernel will automatically generate the private key and
>           certificate as described in Documentation/admin-guide/module-signing.rst
>  
> +choice
> +	prompt "Type of module signing key to be generated"
> +	default MODULE_SIG_KEY_TYPE_RSA
> +	help
> +	 The type of module signing key type to generate. This option
> +	 does not apply if a #PKCS11 URI is used.
> +
> +config MODULE_SIG_KEY_TYPE_RSA
> +	bool "RSA"
> +	depends on MODULE_SIG || (IMA_APPRAISE_MODSIG && MODULES)
> +	help
> +	 Use an RSA key for module signing.
> +
> +config MODULE_SIG_KEY_TYPE_ECDSA
> +	bool "ECDSA"
> +	select CRYPTO_ECDSA
> +	depends on MODULE_SIG || (IMA_APPRAISE_MODSIG && MODULES)
> +	help
> +	 Use an elliptic curve key (NIST P384) for module signing. Consider
> +	 using a strong hash like sha256 or sha384 for hashing modules.
> +
> +	 Note: Remove all ECDSA signing keys, e.g. certs/signing_key.pem,
> +	 when falling back to building Linux 5.11 and older kernels.
> +
> +endchoice
> +
>  config SYSTEM_TRUSTED_KEYRING
>  	bool "Provide system-wide ring of trusted keys"
>  	depends on KEYS
> diff --git a/certs/Makefile b/certs/Makefile
> index f9344e52ecda..279433783b10 100644
> --- a/certs/Makefile
> +++ b/certs/Makefile
> @@ -66,9 +66,21 @@ ifeq ($(CONFIG_MODULE_SIG_KEY),"certs/signing_key.pem")
>  
>  ifeq ($(openssl_available),yes)
>  X509TEXT=$(shell openssl x509 -in "certs/signing_key.pem" -text 2>/dev/null)
> +endif
>  
> +# Support user changing key type
> +ifdef CONFIG_MODULE_SIG_KEY_TYPE_ECDSA
> +keytype_openssl = -newkey ec -pkeyopt ec_paramgen_curve:secp384r1
> +ifeq ($(openssl_available),yes)
> +$(if $(findstring id-ecPublicKey,$(X509TEXT)),,$(shell rm -f "certs/signing_key.pem"))
> +endif
> +endif # CONFIG_MODULE_SIG_KEY_TYPE_ECDSA
> +
> +ifdef CONFIG_MODULE_SIG_KEY_TYPE_RSA
> +ifeq ($(openssl_available),yes)
>  $(if $(findstring rsaEncryption,$(X509TEXT)),,$(shell rm -f "certs/signing_key.pem"))
>  endif
> +endif # CONFIG_MODULE_SIG_KEY_TYPE_RSA
>  
>  $(obj)/signing_key.pem: $(obj)/x509.genkey
>  	@$(kecho) "###"
> @@ -83,6 +95,7 @@ $(obj)/signing_key.pem: $(obj)/x509.genkey
>  		-batch -x509 -config $(obj)/x509.genkey \
>  		-outform PEM -out $(obj)/signing_key.pem \
>  		-keyout $(obj)/signing_key.pem \
> +		$(keytype_openssl) \
>  		$($(quiet)redirect_openssl)
>  	@$(kecho) "###"
>  	@$(kecho) "### Key pair generated."
> diff --git a/crypto/asymmetric_keys/pkcs7_parser.c b/crypto/asymmetric_keys/pkcs7_parser.c
> index 967329e0a07b..6592279d839a 100644
> --- a/crypto/asymmetric_keys/pkcs7_parser.c
> +++ b/crypto/asymmetric_keys/pkcs7_parser.c
> @@ -269,6 +269,14 @@ int pkcs7_sig_note_pkey_algo(void *context, size_t hdrlen,
>  		ctx->sinfo->sig->pkey_algo = "rsa";
>  		ctx->sinfo->sig->encoding = "pkcs1";
>  		break;
> +	case OID_id_ecdsa_with_sha1:
> +	case OID_id_ecdsa_with_sha224:
> +	case OID_id_ecdsa_with_sha256:
> +	case OID_id_ecdsa_with_sha384:
> +	case OID_id_ecdsa_with_sha512:
> +		ctx->sinfo->sig->pkey_algo = "ecdsa";
> +		ctx->sinfo->sig->encoding = "x962";
> +		break;
>  	default:
>  		printk("Unsupported pkey algo: %u\n", ctx->last_oid);
>  		return -ENOPKG;
> -- 
> 2.31.1
> 
>
diff mbox series

Patch

diff --git a/certs/Kconfig b/certs/Kconfig
index f4e61116f94e..916cbb1af928 100644
--- a/certs/Kconfig
+++ b/certs/Kconfig
@@ -15,6 +15,32 @@  config MODULE_SIG_KEY
          then the kernel will automatically generate the private key and
          certificate as described in Documentation/admin-guide/module-signing.rst
 
+choice
+	prompt "Type of module signing key to be generated"
+	default MODULE_SIG_KEY_TYPE_RSA
+	help
+	 The type of module signing key type to generate. This option
+	 does not apply if a #PKCS11 URI is used.
+
+config MODULE_SIG_KEY_TYPE_RSA
+	bool "RSA"
+	depends on MODULE_SIG || (IMA_APPRAISE_MODSIG && MODULES)
+	help
+	 Use an RSA key for module signing.
+
+config MODULE_SIG_KEY_TYPE_ECDSA
+	bool "ECDSA"
+	select CRYPTO_ECDSA
+	depends on MODULE_SIG || (IMA_APPRAISE_MODSIG && MODULES)
+	help
+	 Use an elliptic curve key (NIST P384) for module signing. Consider
+	 using a strong hash like sha256 or sha384 for hashing modules.
+
+	 Note: Remove all ECDSA signing keys, e.g. certs/signing_key.pem,
+	 when falling back to building Linux 5.11 and older kernels.
+
+endchoice
+
 config SYSTEM_TRUSTED_KEYRING
 	bool "Provide system-wide ring of trusted keys"
 	depends on KEYS
diff --git a/certs/Makefile b/certs/Makefile
index f9344e52ecda..279433783b10 100644
--- a/certs/Makefile
+++ b/certs/Makefile
@@ -66,9 +66,21 @@  ifeq ($(CONFIG_MODULE_SIG_KEY),"certs/signing_key.pem")
 
 ifeq ($(openssl_available),yes)
 X509TEXT=$(shell openssl x509 -in "certs/signing_key.pem" -text 2>/dev/null)
+endif
 
+# Support user changing key type
+ifdef CONFIG_MODULE_SIG_KEY_TYPE_ECDSA
+keytype_openssl = -newkey ec -pkeyopt ec_paramgen_curve:secp384r1
+ifeq ($(openssl_available),yes)
+$(if $(findstring id-ecPublicKey,$(X509TEXT)),,$(shell rm -f "certs/signing_key.pem"))
+endif
+endif # CONFIG_MODULE_SIG_KEY_TYPE_ECDSA
+
+ifdef CONFIG_MODULE_SIG_KEY_TYPE_RSA
+ifeq ($(openssl_available),yes)
 $(if $(findstring rsaEncryption,$(X509TEXT)),,$(shell rm -f "certs/signing_key.pem"))
 endif
+endif # CONFIG_MODULE_SIG_KEY_TYPE_RSA
 
 $(obj)/signing_key.pem: $(obj)/x509.genkey
 	@$(kecho) "###"
@@ -83,6 +95,7 @@  $(obj)/signing_key.pem: $(obj)/x509.genkey
 		-batch -x509 -config $(obj)/x509.genkey \
 		-outform PEM -out $(obj)/signing_key.pem \
 		-keyout $(obj)/signing_key.pem \
+		$(keytype_openssl) \
 		$($(quiet)redirect_openssl)
 	@$(kecho) "###"
 	@$(kecho) "### Key pair generated."
diff --git a/crypto/asymmetric_keys/pkcs7_parser.c b/crypto/asymmetric_keys/pkcs7_parser.c
index 967329e0a07b..6592279d839a 100644
--- a/crypto/asymmetric_keys/pkcs7_parser.c
+++ b/crypto/asymmetric_keys/pkcs7_parser.c
@@ -269,6 +269,14 @@  int pkcs7_sig_note_pkey_algo(void *context, size_t hdrlen,
 		ctx->sinfo->sig->pkey_algo = "rsa";
 		ctx->sinfo->sig->encoding = "pkcs1";
 		break;
+	case OID_id_ecdsa_with_sha1:
+	case OID_id_ecdsa_with_sha224:
+	case OID_id_ecdsa_with_sha256:
+	case OID_id_ecdsa_with_sha384:
+	case OID_id_ecdsa_with_sha512:
+		ctx->sinfo->sig->pkey_algo = "ecdsa";
+		ctx->sinfo->sig->encoding = "x962";
+		break;
 	default:
 		printk("Unsupported pkey algo: %u\n", ctx->last_oid);
 		return -ENOPKG;