@@ -233,40 +233,51 @@ $(obj)/.tmp_qtcheck: $(src)/Makefile
# QT needs some extra effort...
$(obj)/.tmp_qtcheck:
@set -e; echo " CHECK qt"; dir=""; pkg=""; \
- pkg-config --exists qt 2> /dev/null && pkg=qt; \
- pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
- if [ -n "$$pkg" ]; then \
- cflags="\$$(shell pkg-config $$pkg --cflags)"; \
- libs="\$$(shell pkg-config $$pkg --libs)"; \
- moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
- dir="$$(pkg-config $$pkg --variable=prefix)"; \
+ pkg-config --exists QtCore 2> /dev/null; \
+ if [ ! $? ]; then \
+ echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \
+ pkg-config --exists qt 2> /dev/null && pkg=qt; \
+ pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
+ if [ -n "$$pkg" ]; then \
+ cflags="\$$(shell pkg-config $$pkg --cflags)"; \
+ libs="\$$(shell pkg-config $$pkg --libs)"; \
+ moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
+ dir="$$(pkg-config $$pkg --variable=prefix)"; \
+ else \
+ for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
+ if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
+ done; \
+ if [ -z "$$dir" ]; then \
+ echo "*"; \
+ echo "* Unable to find any QT installation. Please make sure that"; \
+ echo "* the QT4 or QT3 development package is correctly installed and"; \
+ echo "* either qmake can be found or install pkg-config or set"; \
+ echo "* the QTDIR environment variable to the correct location."; \
+ echo "*"; \
+ false; \
+ fi; \
+ libpath=$$dir/lib; lib=qt; osdir=""; \
+ $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
+ osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
+ test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
+ test -f $$libpath/libqt-mt.so && lib=qt-mt; \
+ cflags="-I$$dir/include"; \
+ libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
+ moc="$$dir/bin/moc"; \
+ fi; \
+ if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
+ echo "*"; \
+ echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
+ echo "*"; \
+ moc="/usr/bin/moc"; \
+ fi; \
else \
- for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
- if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
- done; \
- if [ -z "$$dir" ]; then \
- echo "*"; \
- echo "* Unable to find the QT3 installation. Please make sure that"; \
- echo "* the QT3 development package is correctly installed and"; \
- echo "* either install pkg-config or set the QTDIR environment"; \
- echo "* variable to the correct location."; \
- echo "*"; \
- false; \
- fi; \
- libpath=$$dir/lib; lib=qt; osdir=""; \
- $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
- osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
- test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
- test -f $$libpath/libqt-mt.so && lib=qt-mt; \
- cflags="-I$$dir/include"; \
- libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
- moc="$$dir/bin/moc"; \
- fi; \
- if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
- echo "*"; \
- echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
- echo "*"; \
- moc="/usr/bin/moc"; \
+ headerpath="\$$(shell qmake -query QT_INSTALL_HEADERS)"; \
+ libpath="\$$(shell qmake -query QT_INSTALL_LIBS)"; \
+ binpath="\$$(shell qmake -query QT_INSTALL_BINS)"; \
+ cflags="-I$$headerpath -I$$headerpath/QtCore -I$$headerpath/QtGui -I$$headerpath/Qt3Support -DQT3_SUPPORT"; \
+ libs="-L$$libpath -Wl,-rpath,$$libpath -lQtCore -lQtGui -lQt3Support"; \
+ moc="$$binpath/moc"; \
fi; \
echo "KC_QT_CFLAGS=$$cflags" > $@; \
echo "KC_QT_LIBS=$$libs" >> $@; \
@@ -3,25 +3,42 @@
* Released under the terms of the GNU GPL v2.0.
*/
-#include <qapplication.h>
+#include <qglobal.h>
+
+#if QT_VERSION < 0x040000
#include <qmainwindow.h>
+#include <qvbox.h>
+#include <qvaluelist.h>
+#include <qtextbrowser.h>
+#include <qaction.h>
+#include <qheader.h>
+#include <qfiledialog.h>
+#include <qdragobject.h>
+#include <qpopupmenu.h>
+#else
+#include <q3mainwindow.h>
+#include <q3vbox.h>
+#include <q3valuelist.h>
+#include <q3textbrowser.h>
+#include <q3action.h>
+#include <q3header.h>
+#include <q3filedialog.h>
+#include <q3dragobject.h>
+#include <q3popupmenu.h>
+#endif
+
+#include <qapplication.h>
#include <qdesktopwidget.h>
#include <qtoolbar.h>
#include <qlayout.h>
-#include <qvbox.h>
#include <qsplitter.h>
-#include <qlistview.h>
-#include <qtextbrowser.h>
#include <qlineedit.h>
#include <qlabel.h>
#include <qpushbutton.h>
#include <qmenubar.h>
#include <qmessagebox.h>
-#include <qaction.h>
-#include <qheader.h>
-#include <qfiledialog.h>
-#include <qdragobject.h>
#include <qregexp.h>
+#include <qevent.h>
#include <stdlib.h>
@@ -39,7 +56,7 @@
static QApplication *configApp;
static ConfigSettings *configSettings;
-QAction *ConfigMainWindow::saveAction;
+Q3Action *ConfigMainWindow::saveAction;
static inline QString qgettext(const char* str)
{
@@ -54,9 +71,9 @@ static inline QString qgettext(const QString& str)
/**
* Reads a list of integer values from the application settings.
*/
-QValueList<int> ConfigSettings::readSizes(const QString& key, bool *ok)
+Q3ValueList<int> ConfigSettings::readSizes(const QString& key, bool *ok)
{
- QValueList<int> result;
+ Q3ValueList<int> result;
QStringList entryList = readListEntry(key, ok);
QStringList::Iterator it;
@@ -69,10 +86,10 @@ QValueList<int> ConfigSettings::readSizes(const QString& key, bool *ok)
/**
* Writes a list of integer values to the application settings.
*/
-bool ConfigSettings::writeSizes(const QString& key, const QValueList<int>& value)
+bool ConfigSettings::writeSizes(const QString& key, const Q3ValueList<int>& value)
{
QStringList stringList;
- QValueList<int>::ConstIterator it;
+ Q3ValueList<int>::ConstIterator it;
for (it = value.begin(); it != value.end(); ++it)
stringList.push_back(QString::number(*it));
@@ -80,7 +97,6 @@ bool ConfigSettings::writeSizes(const QString& key, const QValueList<int>& value
}
-#if QT_VERSION >= 300
/*
* set the new data
* TODO check the value
@@ -91,7 +107,6 @@ void ConfigItem::okRename(int col)
sym_set_string_value(menu->sym, text(dataColIdx).latin1());
listView()->updateList(this);
}
-#endif
/*
* update the displayed of a menu entry
@@ -195,11 +210,9 @@ void ConfigItem::updateMenu(void)
data = sym_get_string_value(sym);
-#if QT_VERSION >= 300
int i = list->mapIdx(dataColIdx);
if (i >= 0)
setRenameEnabled(i, TRUE);
-#endif
setText(dataColIdx, data);
if (type == S_STRING)
prompt = QString("%1: %2").arg(prompt).arg(data);
@@ -432,7 +445,7 @@ void ConfigList::updateList(ConfigItem* item)
if (!rootEntry) {
if (mode != listMode)
goto update;
- QListViewItemIterator it(this);
+ Q3ListViewItemIterator it(this);
ConfigItem* item;
for (; it.current(); ++it) {
@@ -527,11 +540,9 @@ void ConfigList::changeValue(ConfigItem* item)
case S_INT:
case S_HEX:
case S_STRING:
-#if QT_VERSION >= 300
if (colMap[dataColIdx] >= 0)
item->startRename(colMap[dataColIdx]);
else
-#endif
parent()->lineEdit->show(item);
break;
}
@@ -563,7 +574,7 @@ void ConfigList::setParentMenu(void)
return;
setRootMenu(menu_get_parent_menu(rootEntry->parent));
- QListViewItemIterator it(this);
+ Q3ListViewItemIterator it(this);
for (; (item = (ConfigItem*)it.current()); it++) {
if (item->menu == oldroot) {
setCurrentItem(item);
@@ -645,7 +656,7 @@ void ConfigList::updateMenuList(P* parent, struct menu* menu)
void ConfigList::keyPressEvent(QKeyEvent* ev)
{
- QListViewItem* i = currentItem();
+ Q3ListViewItem* i = currentItem();
ConfigItem* item;
struct menu *menu;
enum prop_type type;
@@ -811,10 +822,10 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e)
{
if (e->y() <= header()->geometry().bottom()) {
if (!headerPopup) {
- QAction *action;
+ Q3Action *action;
- headerPopup = new QPopupMenu(this);
- action = new QAction(NULL, _("Show Name"), 0, this);
+ headerPopup = new Q3PopupMenu(this);
+ action = new Q3Action(NULL, _("Show Name"), 0, this);
action->setToggleAction(TRUE);
connect(action, SIGNAL(toggled(bool)),
parent(), SLOT(setShowName(bool)));
@@ -822,7 +833,7 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e)
action, SLOT(setOn(bool)));
action->setOn(showName);
action->addTo(headerPopup);
- action = new QAction(NULL, _("Show Range"), 0, this);
+ action = new Q3Action(NULL, _("Show Range"), 0, this);
action->setToggleAction(TRUE);
connect(action, SIGNAL(toggled(bool)),
parent(), SLOT(setShowRange(bool)));
@@ -830,7 +841,7 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e)
action, SLOT(setOn(bool)));
action->setOn(showRange);
action->addTo(headerPopup);
- action = new QAction(NULL, _("Show Data"), 0, this);
+ action = new Q3Action(NULL, _("Show Data"), 0, this);
action->setToggleAction(TRUE);
connect(action, SIGNAL(toggled(bool)),
parent(), SLOT(setShowData(bool)));
@@ -914,7 +925,7 @@ void ConfigView::setShowData(bool b)
void ConfigList::setAllOpen(bool open)
{
- QListViewItemIterator it(this);
+ Q3ListViewItemIterator it(this);
for (; it.current(); it++)
it.current()->setOpen(open);
@@ -937,7 +948,7 @@ void ConfigView::updateListAll(void)
}
ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name)
- : Parent(parent, name), sym(0), menu(0)
+ : Parent(parent, name), sym(0), _menu(0)
{
if (name) {
configSettings->beginGroup(name);
@@ -960,7 +971,7 @@ void ConfigInfoView::setShowDebug(bool b)
{
if (_showDebug != b) {
_showDebug = b;
- if (menu)
+ if (_menu)
menuInfo();
else if (sym)
symbolInfo();
@@ -970,11 +981,11 @@ void ConfigInfoView::setShowDebug(bool b)
void ConfigInfoView::setInfo(struct menu *m)
{
- if (menu == m)
+ if (_menu == m)
return;
- menu = m;
+ _menu = m;
sym = NULL;
- if (!menu)
+ if (!_menu)
clear();
else
menuInfo();
@@ -1001,11 +1012,11 @@ void ConfigInfoView::menuInfo(void)
struct symbol* sym;
QString head, debug, help;
- sym = menu->sym;
+ sym = _menu->sym;
if (sym) {
- if (menu->prompt) {
+ if (_menu->prompt) {
head += "<big><b>";
- head += print_filter(_(menu->prompt->text));
+ head += print_filter(_(_menu->prompt->text));
head += "</b></big>";
if (sym->name) {
head += " (";
@@ -1031,23 +1042,23 @@ void ConfigInfoView::menuInfo(void)
debug = debug_info(sym);
struct gstr help_gstr = str_new();
- menu_get_ext_help(menu, &help_gstr);
+ menu_get_ext_help(_menu, &help_gstr);
help = print_filter(str_get(&help_gstr));
str_free(&help_gstr);
- } else if (menu->prompt) {
+ } else if (_menu->prompt) {
head += "<big><b>";
- head += print_filter(_(menu->prompt->text));
+ head += print_filter(_(_menu->prompt->text));
head += "</b></big><br><br>";
if (showDebug()) {
- if (menu->prompt->visible.expr) {
+ if (_menu->prompt->visible.expr) {
debug += " dep: ";
- expr_print(menu->prompt->visible.expr, expr_print_help, &debug, E_NONE);
+ expr_print(_menu->prompt->visible.expr, expr_print_help, &debug, E_NONE);
debug += "<br><br>";
}
}
}
if (showDebug())
- debug += QString().sprintf("defined at %s:%d<br><br>", menu->file->name, menu->lineno);
+ debug += QString().sprintf("defined at %s:%d<br><br>", _menu->file->name, _menu->lineno);
setText(head + debug + help);
}
@@ -1150,10 +1161,10 @@ void ConfigInfoView::expr_print_help(void *data, struct symbol *sym, const char
*text += str2;
}
-QPopupMenu* ConfigInfoView::createPopupMenu(const QPoint& pos)
+Q3PopupMenu* ConfigInfoView::createPopupMenu(const QPoint& pos)
{
- QPopupMenu* popup = Parent::createPopupMenu(pos);
- QAction* action = new QAction(NULL, _("Show Debug Info"), 0, popup);
+ Q3PopupMenu* popup = Parent::createPopupMenu(pos);
+ Q3Action* action = new Q3Action(NULL, _("Show Debug Info"), 0, popup);
action->setToggleAction(TRUE);
connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool)));
connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setOn(bool)));
@@ -1210,7 +1221,7 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *nam
y = configSettings->readNumEntry("/window y", 0, &ok);
if (ok)
move(x, y);
- QValueList<int> sizes = configSettings->readSizes("/split", &ok);
+ Q3ValueList<int> sizes = configSettings->readSizes("/split", &ok);
if (ok)
split->setSizes(sizes);
configSettings->endGroup();
@@ -1297,42 +1308,42 @@ ConfigMainWindow::ConfigMainWindow(void)
configList->setFocus();
menu = menuBar();
- toolBar = new QToolBar("Tools", this);
+ toolBar = new Q3ToolBar("Tools", this);
- backAction = new QAction("Back", QPixmap(xpm_back), _("Back"), 0, this);
+ backAction = new Q3Action("Back", QPixmap(xpm_back), _("Back"), 0, this);
connect(backAction, SIGNAL(activated()), SLOT(goBack()));
backAction->setEnabled(FALSE);
- QAction *quitAction = new QAction("Quit", _("&Quit"), Qt::CTRL + Qt::Key_Q, this);
+ Q3Action *quitAction = new Q3Action("Quit", _("&Quit"), Qt::CTRL + Qt::Key_Q, this);
connect(quitAction, SIGNAL(activated()), SLOT(close()));
- QAction *loadAction = new QAction("Load", QPixmap(xpm_load), _("&Load"), Qt::CTRL + Qt::Key_L, this);
+ Q3Action *loadAction = new Q3Action("Load", QPixmap(xpm_load), _("&Load"), Qt::CTRL + Qt::Key_L, this);
connect(loadAction, SIGNAL(activated()), SLOT(loadConfig()));
- saveAction = new QAction("Save", QPixmap(xpm_save), _("&Save"), Qt::CTRL + Qt::Key_S, this);
+ saveAction = new Q3Action("Save", QPixmap(xpm_save), _("&Save"), Qt::CTRL + Qt::Key_S, this);
connect(saveAction, SIGNAL(activated()), SLOT(saveConfig()));
conf_set_changed_callback(conf_changed);
// Set saveAction's initial state
conf_changed();
- QAction *saveAsAction = new QAction("Save As...", _("Save &As..."), 0, this);
+ Q3Action *saveAsAction = new Q3Action("Save As...", _("Save &As..."), 0, this);
connect(saveAsAction, SIGNAL(activated()), SLOT(saveConfigAs()));
- QAction *searchAction = new QAction("Find", _("&Find"), Qt::CTRL + Qt::Key_F, this);
+ Q3Action *searchAction = new Q3Action("Find", _("&Find"), Qt::CTRL + Qt::Key_F, this);
connect(searchAction, SIGNAL(activated()), SLOT(searchConfig()));
- QAction *singleViewAction = new QAction("Single View", QPixmap(xpm_single_view), _("Single View"), 0, this);
+ Q3Action *singleViewAction = new Q3Action("Single View", QPixmap(xpm_single_view), _("Single View"), 0, this);
connect(singleViewAction, SIGNAL(activated()), SLOT(showSingleView()));
- QAction *splitViewAction = new QAction("Split View", QPixmap(xpm_split_view), _("Split View"), 0, this);
+ Q3Action *splitViewAction = new Q3Action("Split View", QPixmap(xpm_split_view), _("Split View"), 0, this);
connect(splitViewAction, SIGNAL(activated()), SLOT(showSplitView()));
- QAction *fullViewAction = new QAction("Full View", QPixmap(xpm_tree_view), _("Full View"), 0, this);
+ Q3Action *fullViewAction = new Q3Action("Full View", QPixmap(xpm_tree_view), _("Full View"), 0, this);
connect(fullViewAction, SIGNAL(activated()), SLOT(showFullView()));
- QAction *showNameAction = new QAction(NULL, _("Show Name"), 0, this);
+ Q3Action *showNameAction = new Q3Action(NULL, _("Show Name"), 0, this);
showNameAction->setToggleAction(TRUE);
connect(showNameAction, SIGNAL(toggled(bool)), configView, SLOT(setShowName(bool)));
connect(configView, SIGNAL(showNameChanged(bool)), showNameAction, SLOT(setOn(bool)));
showNameAction->setOn(configView->showName());
- QAction *showRangeAction = new QAction(NULL, _("Show Range"), 0, this);
+ Q3Action *showRangeAction = new Q3Action(NULL, _("Show Range"), 0, this);
showRangeAction->setToggleAction(TRUE);
connect(showRangeAction, SIGNAL(toggled(bool)), configView, SLOT(setShowRange(bool)));
connect(configView, SIGNAL(showRangeChanged(bool)), showRangeAction, SLOT(setOn(bool)));
showRangeAction->setOn(configList->showRange);
- QAction *showDataAction = new QAction(NULL, _("Show Data"), 0, this);
+ Q3Action *showDataAction = new Q3Action(NULL, _("Show Data"), 0, this);
showDataAction->setToggleAction(TRUE);
connect(showDataAction, SIGNAL(toggled(bool)), configView, SLOT(setShowData(bool)));
connect(configView, SIGNAL(showDataChanged(bool)), showDataAction, SLOT(setOn(bool)));
@@ -1345,9 +1356,15 @@ ConfigMainWindow::ConfigMainWindow(void)
connect(optGroup, SIGNAL(selected(QAction *)), menuView,
SLOT(setOptionMode(QAction *)));
- configView->showNormalAction = new QAction(NULL, _("Show Normal Options"), 0, optGroup);
- configView->showAllAction = new QAction(NULL, _("Show All Options"), 0, optGroup);
- configView->showPromptAction = new QAction(NULL, _("Show Prompt Options"), 0, optGroup);
+#if QT_VERSION >= 0x040000
+ configView->showNormalAction = new QAction(_("Show Normal Options"), optGroup);
+ configView->showAllAction = new QAction(_("Show All Options"), optGroup);
+ configView->showPromptAction = new QAction(_("Show Prompt Options"), optGroup);
+#else
+ configView->showNormalAction = new QAction(_("Show Normal Options"), 0, optGroup);
+ configView->showAllAction = new QAction(_("Show All Options"), 0, optGroup);
+ configView->showPromptAction = new QAction(_("Show Prompt Options"), 0, optGroup);
+#endif
configView->showNormalAction->setToggleAction(TRUE);
configView->showNormalAction->setOn(configList->optMode == normalOpt);
configView->showAllAction->setToggleAction(TRUE);
@@ -1355,15 +1372,15 @@ ConfigMainWindow::ConfigMainWindow(void)
configView->showPromptAction->setToggleAction(TRUE);
configView->showPromptAction->setOn(configList->optMode == promptOpt);
- QAction *showDebugAction = new QAction(NULL, _("Show Debug Info"), 0, this);
+ Q3Action *showDebugAction = new Q3Action(NULL, _("Show Debug Info"), 0, this);
showDebugAction->setToggleAction(TRUE);
connect(showDebugAction, SIGNAL(toggled(bool)), helpText, SLOT(setShowDebug(bool)));
connect(helpText, SIGNAL(showDebugChanged(bool)), showDebugAction, SLOT(setOn(bool)));
showDebugAction->setOn(helpText->showDebug());
- QAction *showIntroAction = new QAction(NULL, _("Introduction"), 0, this);
+ Q3Action *showIntroAction = new Q3Action(NULL, _("Introduction"), 0, this);
connect(showIntroAction, SIGNAL(activated()), SLOT(showIntro()));
- QAction *showAboutAction = new QAction(NULL, _("About"), 0, this);
+ Q3Action *showAboutAction = new Q3Action(NULL, _("About"), 0, this);
connect(showAboutAction, SIGNAL(activated()), SLOT(showAbout()));
// init tool bar
@@ -1377,7 +1394,7 @@ ConfigMainWindow::ConfigMainWindow(void)
fullViewAction->addTo(toolBar);
// create config menu
- QPopupMenu* config = new QPopupMenu(this);
+ Q3PopupMenu* config = new Q3PopupMenu(this);
menu->insertItem(_("&File"), config);
loadAction->addTo(config);
saveAction->addTo(config);
@@ -1386,12 +1403,12 @@ ConfigMainWindow::ConfigMainWindow(void)
quitAction->addTo(config);
// create edit menu
- QPopupMenu* editMenu = new QPopupMenu(this);
+ Q3PopupMenu* editMenu = new Q3PopupMenu(this);
menu->insertItem(_("&Edit"), editMenu);
searchAction->addTo(editMenu);
// create options menu
- QPopupMenu* optionMenu = new QPopupMenu(this);
+ Q3PopupMenu* optionMenu = new Q3PopupMenu(this);
menu->insertItem(_("&Option"), optionMenu);
showNameAction->addTo(optionMenu);
showRangeAction->addTo(optionMenu);
@@ -1399,10 +1416,9 @@ ConfigMainWindow::ConfigMainWindow(void)
optionMenu->insertSeparator();
optGroup->addTo(optionMenu);
optionMenu->insertSeparator();
- showDebugAction->addTo(optionMenu);
// create help menu
- QPopupMenu* helpMenu = new QPopupMenu(this);
+ Q3PopupMenu* helpMenu = new Q3PopupMenu(this);
menu->insertSeparator();
menu->insertItem(_("&Help"), helpMenu);
showIntroAction->addTo(helpMenu);
@@ -1437,7 +1453,7 @@ ConfigMainWindow::ConfigMainWindow(void)
showSplitView();
// UI setup done, restore splitter positions
- QValueList<int> sizes = configSettings->readSizes("/split1", &ok);
+ Q3ValueList<int> sizes = configSettings->readSizes("/split1", &ok);
if (ok)
split1->setSizes(sizes);
@@ -1448,7 +1464,7 @@ ConfigMainWindow::ConfigMainWindow(void)
void ConfigMainWindow::loadConfig(void)
{
- QString s = QFileDialog::getOpenFileName(conf_get_configname(), NULL, this);
+ QString s = Q3FileDialog::getOpenFileName(conf_get_configname(), NULL, this);
if (s.isNull())
return;
if (conf_read(QFile::encodeName(s)))
@@ -1464,7 +1480,7 @@ void ConfigMainWindow::saveConfig(void)
void ConfigMainWindow::saveConfigAs(void)
{
- QString s = QFileDialog::getSaveFileName(conf_get_configname(), NULL, this);
+ QString s = Q3FileDialog::getSaveFileName(conf_get_configname(), NULL, this);
if (s.isNull())
return;
if (conf_write(QFile::encodeName(s)))
@@ -3,26 +3,25 @@
* Released under the terms of the GNU GPL v2.0.
*/
+#if QT_VERSION < 0x040000
#include <qlistview.h>
-#if QT_VERSION >= 300
-#include <qsettings.h>
#else
-class QSettings {
-public:
- void beginGroup(const QString& group) { }
- void endGroup(void) { }
- bool readBoolEntry(const QString& key, bool def = FALSE, bool* ok = 0) const
- { if (ok) *ok = FALSE; return def; }
- int readNumEntry(const QString& key, int def = 0, bool* ok = 0) const
- { if (ok) *ok = FALSE; return def; }
- QString readEntry(const QString& key, const QString& def = QString::null, bool* ok = 0) const
- { if (ok) *ok = FALSE; return def; }
- QStringList readListEntry(const QString& key, bool* ok = 0) const
- { if (ok) *ok = FALSE; return QStringList(); }
- template <class t>
- bool writeEntry(const QString& key, t value)
- { return TRUE; }
-};
+#include <q3listview.h>
+#endif
+#include <qsettings.h>
+
+#if QT_VERSION < 0x040000
+#define Q3ValueList QValueList
+#define Q3PopupMenu QPopupMenu
+#define Q3ListView QListView
+#define Q3ListViewItem QListViewItem
+#define Q3VBox QVBox
+#define Q3TextBrowser QTextBrowser
+#define Q3MainWindow QMainWindow
+#define Q3Action QAction
+#define Q3ToolBar QToolBar
+#define Q3ListViewItemIterator QListViewItemIterator
+#define Q3FileDialog QFileDialog
#endif
class ConfigView;
@@ -31,11 +30,10 @@ class ConfigItem;
class ConfigLineEdit;
class ConfigMainWindow;
-
class ConfigSettings : public QSettings {
public:
- QValueList<int> readSizes(const QString& key, bool *ok);
- bool writeSizes(const QString& key, const QValueList<int>& value);
+ Q3ValueList<int> readSizes(const QString& key, bool *ok);
+ bool writeSizes(const QString& key, const Q3ValueList<int>& value);
};
enum colIdx {
@@ -48,9 +46,9 @@ enum optionMode {
normalOpt = 0, allOpt, promptOpt
};
-class ConfigList : public QListView {
+class ConfigList : public Q3ListView {
Q_OBJECT
- typedef class QListView Parent;
+ typedef class Q3ListView Parent;
public:
ConfigList(ConfigView* p, const char *name = 0);
void reinit(void);
@@ -135,17 +133,17 @@ public:
struct menu *rootEntry;
QColorGroup disabledColorGroup;
QColorGroup inactivedColorGroup;
- QPopupMenu* headerPopup;
+ Q3PopupMenu* headerPopup;
private:
int colMap[colNr];
int colRevMap[colNr];
};
-class ConfigItem : public QListViewItem {
- typedef class QListViewItem Parent;
+class ConfigItem : public Q3ListViewItem {
+ typedef class Q3ListViewItem Parent;
public:
- ConfigItem(QListView *parent, ConfigItem *after, struct menu *m, bool v)
+ ConfigItem(Q3ListView *parent, ConfigItem *after, struct menu *m, bool v)
: Parent(parent, after), menu(m), visible(v), goParent(false)
{
init();
@@ -155,16 +153,14 @@ public:
{
init();
}
- ConfigItem(QListView *parent, ConfigItem *after, bool v)
+ ConfigItem(Q3ListView *parent, ConfigItem *after, bool v)
: Parent(parent, after), menu(0), visible(v), goParent(true)
{
init();
}
~ConfigItem(void);
void init(void);
-#if QT_VERSION >= 300
void okRename(int col);
-#endif
void updateMenu(void);
void testUpdateMenu(bool v);
ConfigList* listView() const
@@ -219,9 +215,9 @@ public:
ConfigItem *item;
};
-class ConfigView : public QVBox {
+class ConfigView : public Q3VBox {
Q_OBJECT
- typedef class QVBox Parent;
+ typedef class Q3VBox Parent;
public:
ConfigView(QWidget* parent, const char *name = 0);
~ConfigView(void);
@@ -252,9 +248,9 @@ public:
static QAction *showPromptAction;
};
-class ConfigInfoView : public QTextBrowser {
+class ConfigInfoView : public Q3TextBrowser {
Q_OBJECT
- typedef class QTextBrowser Parent;
+ typedef class Q3TextBrowser Parent;
public:
ConfigInfoView(QWidget* parent, const char *name = 0);
bool showDebug(void) const { return _showDebug; }
@@ -274,11 +270,11 @@ protected:
QString debug_info(struct symbol *sym);
static QString print_filter(const QString &str);
static void expr_print_help(void *data, struct symbol *sym, const char *str);
- QPopupMenu* createPopupMenu(const QPoint& pos);
+ Q3PopupMenu* createPopupMenu(const QPoint& pos);
void contentsContextMenuEvent(QContextMenuEvent *e);
struct symbol *sym;
- struct menu *menu;
+ struct menu *_menu;
bool _showDebug;
};
@@ -302,10 +298,10 @@ protected:
struct symbol **result;
};
-class ConfigMainWindow : public QMainWindow {
+class ConfigMainWindow : public Q3MainWindow {
Q_OBJECT
- static QAction *saveAction;
+ static Q3Action *saveAction;
static void conf_changed(void);
public:
ConfigMainWindow(void);
@@ -334,8 +330,8 @@ protected:
ConfigView *configView;
ConfigList *configList;
ConfigInfoView *helpText;
- QToolBar *toolBar;
- QAction *backAction;
+ Q3ToolBar *toolBar;
+ Q3Action *backAction;
QSplitter* split1;
QSplitter* split2;
};