@@ -2,10 +2,10 @@
# Makefile for USB ATM/xDSL drivers
#
+ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
+
obj-$(CONFIG_USB_CXACRU) += cxacru.o
obj-$(CONFIG_USB_SPEEDTOUCH) += speedtch.o
obj-$(CONFIG_USB_UEAGLEATM) += ueagle-atm.o
obj-$(CONFIG_USB_ATM) += usbatm.o
obj-$(CONFIG_USB_XUSBATM) += xusbatm.o
-
-ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
@@ -2,8 +2,8 @@
# Makefile for Cypress C67X00 USB Controller
#
-ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG
+ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
-obj-$(CONFIG_USB_C67X00_HCD) += c67x00.o
+obj-$(CONFIG_USB_C67X00_HCD) += c67x00.o
-c67x00-objs := c67x00-drv.o c67x00-ll-hpi.o c67x00-hcd.o c67x00-sched.o
+c67x00-y := c67x00-drv.o c67x00-ll-hpi.o c67x00-hcd.o c67x00-sched.o
@@ -2,18 +2,13 @@
# Makefile for USB Core files and filesystem
#
-usbcore-objs := usb.o hub.o hcd.o urb.o message.o driver.o \
- config.o file.o buffer.o sysfs.o endpoint.o \
- devio.o notify.o generic.o quirks.o devices.o
-
-ifeq ($(CONFIG_PCI),y)
- usbcore-objs += hcd-pci.o
-endif
+ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
-ifeq ($(CONFIG_USB_DEVICEFS),y)
- usbcore-objs += inode.o
-endif
+usbcore-y := usb.o hub.o hcd.o urb.o message.o driver.o
+usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o
+usbcore-y += devio.o notify.o generic.o quirks.o devices.o
-obj-$(CONFIG_USB) += usbcore.o
+usbcore-$(CONFIG_PCI) += hcd-pci.o
+usbcore-$(CONFIG_USB_DEVICEFS) += inode.o
-ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
+obj-$(CONFIG_USB) += usbcore.o
@@ -2,4 +2,4 @@
# Makefile for early USB devices
#
-obj-$(CONFIG_EARLY_PRINTK_DBGP) += ehci-dbgp.o
+obj-$(CONFIG_EARLY_PRINTK_DBGP) += ehci-dbgp.o
@@ -1,7 +1,7 @@
#
# USB peripheral controller drivers
#
-ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
+ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o
obj-$(CONFIG_USB_NET2280) += net2280.o
@@ -16,10 +16,8 @@ obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o
obj-$(CONFIG_USB_AT91) += at91_udc.o
obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
-fsl_usb2_udc-objs := fsl_udc_core.o
-ifeq ($(CONFIG_ARCH_MXC),y)
-fsl_usb2_udc-objs += fsl_mxc_udc.o
-endif
+fsl_usb2_udc-y := fsl_udc_core.o
+fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o
obj-$(CONFIG_USB_M66592) += m66592-udc.o
obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o
obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o
@@ -30,21 +28,21 @@ obj-$(CONFIG_USB_LANGWELL) += langwell_udc.o
#
# USB gadget drivers
#
-g_zero-objs := zero.o
-g_audio-objs := audio.o
-g_ether-objs := ether.o
-g_serial-objs := serial.o
-g_midi-objs := gmidi.o
-gadgetfs-objs := inode.o
-g_file_storage-objs := file_storage.o
-g_mass_storage-objs := mass_storage.o
-g_printer-objs := printer.o
-g_cdc-objs := cdc2.o
-g_multi-objs := multi.o
-g_hid-objs := hid.o
-g_dbgp-objs := dbgp.o
-g_nokia-objs := nokia.o
-g_webcam-objs := webcam.o
+g_zero-y := zero.o
+g_audio-y := audio.o
+g_ether-y := ether.o
+g_serial-y := serial.o
+g_midi-y := gmidi.o
+gadgetfs-y := inode.o
+g_file_storage-y := file_storage.o
+g_mass_storage-y := mass_storage.o
+g_printer-y := printer.o
+g_cdc-y := cdc2.o
+g_multi-y := multi.o
+g_hid-y := hid.o
+g_dbgp-y := dbgp.o
+g_nokia-y := nokia.o
+g_webcam-y := webcam.o
obj-$(CONFIG_USB_ZERO) += g_zero.o
obj-$(CONFIG_USB_AUDIO) += g_audio.o
@@ -62,4 +60,3 @@ obj-$(CONFIG_USB_G_DBGP) += g_dbgp.o
obj-$(CONFIG_USB_G_MULTI) += g_multi.o
obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o
obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o
-
@@ -2,15 +2,17 @@
# Makefile for USB Host Controller Drivers
#
-ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
+ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
-isp1760-objs := isp1760-hcd.o isp1760-if.o
-fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \
- fhci-tds.o fhci-sched.o
-ifeq ($(CONFIG_FHCI_DEBUG),y)
-fhci-objs += fhci-dbg.o
-endif
-xhci-hcd-objs := xhci.o xhci-mem.o xhci-pci.o xhci-ring.o xhci-hub.o xhci-dbg.o
+isp1760-y := isp1760-hcd.o isp1760-if.o
+
+fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o
+fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o
+
+fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o
+
+xhci-hcd-y := xhci.o xhci-mem.o xhci-pci.o
+xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
obj-$(CONFIG_USB_WHCI_HCD) += whci/
@@ -32,4 +34,3 @@ obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
-
@@ -3,7 +3,7 @@ obj-$(CONFIG_USB_WHCI_HCD) += whci-hcd.o
whci-hcd-y := \
asl.o \
debug.o \
- hcd.o \
+ hcd.o \
hw.o \
init.o \
int.o \
@@ -3,27 +3,27 @@
# (the ones that don't fit into any other categories)
#
-obj-$(CONFIG_USB_ADUTUX) += adutux.o
-obj-$(CONFIG_USB_APPLEDISPLAY) += appledisplay.o
-obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
-obj-$(CONFIG_USB_CYTHERM) += cytherm.o
-obj-$(CONFIG_USB_EMI26) += emi26.o
-obj-$(CONFIG_USB_EMI62) += emi62.o
-obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o
-obj-$(CONFIG_USB_IDMOUSE) += idmouse.o
-obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o
-obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o
-obj-$(CONFIG_USB_LCD) += usblcd.o
-obj-$(CONFIG_USB_LD) += ldusb.o
-obj-$(CONFIG_USB_LED) += usbled.o
-obj-$(CONFIG_USB_LEGOTOWER) += legousbtower.o
-obj-$(CONFIG_USB_RIO500) += rio500.o
-obj-$(CONFIG_USB_TEST) += usbtest.o
-obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o
-obj-$(CONFIG_USB_USS720) += uss720.o
-obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o
-obj-$(CONFIG_USB_YUREX) += yurex.o
+ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
-obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/
+obj-$(CONFIG_USB_ADUTUX) += adutux.o
+obj-$(CONFIG_USB_APPLEDISPLAY) += appledisplay.o
+obj-$(CONFIG_USB_CYPRESS_CY7C63) += cypress_cy7c63.o
+obj-$(CONFIG_USB_CYTHERM) += cytherm.o
+obj-$(CONFIG_USB_EMI26) += emi26.o
+obj-$(CONFIG_USB_EMI62) += emi62.o
+obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o
+obj-$(CONFIG_USB_IDMOUSE) += idmouse.o
+obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o
+obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o
+obj-$(CONFIG_USB_LCD) += usblcd.o
+obj-$(CONFIG_USB_LD) += ldusb.o
+obj-$(CONFIG_USB_LED) += usbled.o
+obj-$(CONFIG_USB_LEGOTOWER) += legousbtower.o
+obj-$(CONFIG_USB_RIO500) += rio500.o
+obj-$(CONFIG_USB_TEST) += usbtest.o
+obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o
+obj-$(CONFIG_USB_USS720) += uss720.o
+obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o
+obj-$(CONFIG_USB_YUREX) += yurex.o
-ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
+obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/
@@ -4,5 +4,4 @@
obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga.o
-sisusbvga-objs := sisusb.o sisusb_init.o sisusb_con.o
-
+sisusbvga-y := sisusb.o sisusb_init.o sisusb_con.o
@@ -2,6 +2,6 @@
# Makefile for USB monitor
#
-usbmon-objs := mon_main.o mon_stat.o mon_text.o mon_bin.o
+usbmon-y := mon_main.o mon_stat.o mon_text.o mon_bin.o
obj-$(CONFIG_USB_MON) += usbmon.o
@@ -2,53 +2,23 @@
# for USB OTG silicon based on Mentor Graphics INVENTRA designs
#
-musb_hdrc-objs := musb_core.o
-
-obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
-
-ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
- musb_hdrc-objs += davinci.o
-endif
-
-ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y)
- musb_hdrc-objs += da8xx.o
-endif
-
-ifeq ($(CONFIG_USB_TUSB6010),y)
- musb_hdrc-objs += tusb6010.o
-endif
-
-ifeq ($(CONFIG_ARCH_OMAP2430),y)
- musb_hdrc-objs += omap2430.o
-endif
-
-ifeq ($(CONFIG_ARCH_OMAP3430),y)
- musb_hdrc-objs += omap2430.o
-endif
-
-ifeq ($(CONFIG_ARCH_OMAP4),y)
- musb_hdrc-objs += omap2430.o
-endif
+ccflags-$(CONFIG_USB_MUSB_DEBUG) := -DDEBUG
-ifeq ($(CONFIG_BF54x),y)
- musb_hdrc-objs += blackfin.o
-endif
+obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
-ifeq ($(CONFIG_BF52x),y)
- musb_hdrc-objs += blackfin.o
-endif
+musb_hdrc-y := musb_core.o
-ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
- musb_hdrc-objs += musb_gadget_ep0.o musb_gadget.o
-endif
-
-ifeq ($(CONFIG_USB_MUSB_HDRC_HCD),y)
- musb_hdrc-objs += musb_virthub.o musb_host.o
-endif
-
-ifeq ($(CONFIG_DEBUG_FS),y)
- musb_hdrc-objs += musb_debugfs.o
-endif
+musb_hdrc-$(CONFIG_ARCH_DAVINCI_DMx) += davinci.o
+musb_hdrc-$(CONFIG_ARCH_DAVINCI_DA8XX) += da8xx.o
+musb_hdrc-$(CONFIG_USB_TUSB6010) += tusb6010.o
+musb_hdrc-$(CONFIG_ARCH_OMAP2430) += omap2430.o
+musb_hdrc-$(CONFIG_ARCH_OMAP3430) += omap2430.o
+musb_hdrc-$(CONFIG_ARCH_OMAP4) += omap2430.o
+musb_hdrc-$(CONFIG_BF54x) += blackfin.o
+musb_hdrc-$(CONFIG_BF52x) += blackfin.o
+musb_hdrc-$(CONFIG_USB_GADGET_MUSB_HDRC) += musb_gadget_ep0.o musb_gadget.o
+musb_hdrc-$(CONFIG_USB_MUSB_HDRC_HCD) += musb_virthub.o musb_host.o
+musb_hdrc-$(CONFIG_DEBUG_FS) += musb_debugfs.o
# the kconfig must guarantee that only one of the
# possible I/O schemes will be enabled at a time ...
@@ -58,24 +28,17 @@ endif
ifneq ($(CONFIG_MUSB_PIO_ONLY),y)
ifeq ($(CONFIG_USB_INVENTRA_DMA),y)
- musb_hdrc-objs += musbhsdma.o
+ musb_hdrc-y += musbhsdma.o
else
ifeq ($(CONFIG_USB_TI_CPPI_DMA),y)
- musb_hdrc-objs += cppi_dma.o
+ musb_hdrc-y += cppi_dma.o
else
ifeq ($(CONFIG_USB_TUSB_OMAP_DMA),y)
- musb_hdrc-objs += tusb6010_omap.o
+ musb_hdrc-y += tusb6010_omap.o
endif
endif
endif
endif
-
-
-################################################################################
-
-# Debugging
-
-ccflags-$(CONFIG_USB_MUSB_DEBUG) := -DDEBUG
@@ -2,6 +2,9 @@
# OTG infrastructure and transceiver drivers
#
+ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
+ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG
+
# infrastructure
obj-$(CONFIG_USB_OTG_UTILS) += otg.o
@@ -12,7 +15,3 @@ obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o
obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o
obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o
obj-$(CONFIG_USB_ULPI) += ulpi.o
-
-ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG
-ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG
-
@@ -6,10 +6,10 @@
obj-$(CONFIG_USB_SERIAL) += usbserial.o
-usbserial-obj-$(CONFIG_USB_SERIAL_CONSOLE) += console.o
-usbserial-obj-$(CONFIG_USB_EZUSB) += ezusb.o
+usbserial-y := usb-serial.o generic.o bus.o
-usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y)
+usbserial-$(CONFIG_USB_SERIAL_CONSOLE) += console.o
+usbserial-$(CONFIG_USB_EZUSB) += ezusb.o
obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o
obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o
@@ -59,6 +59,5 @@ obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o
obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o
obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o
obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o
-obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o
+obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o
obj-$(CONFIG_USB_SERIAL_ZIO) += zio.o
-
@@ -5,21 +5,21 @@
# Rewritten to use lists instead of if-statements.
#
-ccflags-y := -Idrivers/scsi
+ccflags-y := -Idrivers/scsi
obj-$(CONFIG_USB_UAS) += uas.o
obj-$(CONFIG_USB_STORAGE) += usb-storage.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o
+usb-storage-y := scsiglue.o protocol.o transport.o usb.o
+usb-storage-y += initializers.o sierra_ms.o option_ms.o
-usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
- initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y)
+usb-storage-$(CONFIG_USB_STORAGE_DEBUG) += debug.o
ifeq ($(CONFIG_USB_LIBUSUAL),)
- usb-storage-objs += usual-tables.o
+ usb-storage-y += usual-tables.o
else
obj-$(CONFIG_USB) += usb-libusual.o
- usb-libusual-objs := libusual.o usual-tables.o
+ usb-libusual-y := libusual.o usual-tables.o
endif
obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o
@@ -34,14 +34,14 @@ obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o
obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o
obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o
-ums-alauda-objs := alauda.o
-ums-cypress-objs := cypress_atacb.o
-ums-datafab-objs := datafab.o
-ums-freecom-objs := freecom.o
-ums-isd200-objs := isd200.o
-ums-jumpshot-objs := jumpshot.o
-ums-karma-objs := karma.o
-ums-onetouch-objs := onetouch.o
-ums-sddr09-objs := sddr09.o
-ums-sddr55-objs := sddr55.o
-ums-usbat-objs := shuttle_usbat.o
+ums-alauda-y := alauda.o
+ums-cypress-y := cypress_atacb.o
+ums-datafab-y := datafab.o
+ums-freecom-y := freecom.o
+ums-isd200-y := isd200.o
+ums-jumpshot-y := jumpshot.o
+ums-karma-y := karma.o
+ums-onetouch-y := onetouch.o
+ums-sddr09-y := sddr09.o
+ums-sddr55-y := sddr55.o
+ums-usbat-y := shuttle_usbat.o
@@ -1,9 +1,11 @@
+ccflags-$(CONFIG_USB_WUSB_CBAF_DEBUG) := -DDEBUG
+
obj-$(CONFIG_USB_WUSB) += wusbcore.o
obj-$(CONFIG_USB_HWA_HCD) += wusb-wa.o
obj-$(CONFIG_USB_WUSB_CBAF) += wusb-cbaf.o
-wusbcore-objs := \
+wusbcore-y := \
crypto.o \
devconnect.o \
dev-sysfs.o \
@@ -14,11 +16,10 @@ wusbcore-objs := \
security.o \
wusbhc.o
-wusb-cbaf-objs := cbaf.o
+wusb-cbaf-y := cbaf.o
-wusb-wa-objs := wa-hc.o \
- wa-nep.o \
- wa-rpipe.o \
- wa-xfer.o
-
-ccflags-$(CONFIG_USB_WUSB_CBAF_DEBUG) := -DDEBUG
+wusb-wa-y := \
+ wa-hc.o \
+ wa-nep.o \
+ wa-rpipe.o \
+ wa-xfer.o