diff mbox series

kbuild: terminate Kconfig when $(CC) or $(LD) is missing

Message ID 20190509073555.15545-1-yamada.masahiro@socionext.com (mailing list archive)
State New, archived
Headers show
Series kbuild: terminate Kconfig when $(CC) or $(LD) is missing | expand

Commit Message

Masahiro Yamada May 9, 2019, 7:35 a.m. UTC
If the compiler specified by $(CC) is not present, the Kconfig stage
sprinkles 'not found' messages, then succeeds.

  $ make CROSS_COMPILE=foo defconfig
  /bin/sh: 1: foogcc: not found
  /bin/sh: 1: foogcc: not found
  *** Default configuration is based on 'x86_64_defconfig'
  ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/clang-version.sh: 11: ./scripts/clang-version.sh: foogcc: not found
  ./scripts/gcc-plugin.sh: 11: ./scripts/gcc-plugin.sh: foogcc: not found
  init/Kconfig:16:warning: 'GCC_VERSION': number is invalid
  #
  # configuration written to .config
  #

Terminate parsing files immediately if $(CC) or $(LD) is not found.
"make *config" will fail more nicely.

  $ make CROSS_COMPILE=foo defconfig
  *** Default configuration is based on 'x86_64_defconfig'
  scripts/Kconfig.include:34: compiler 'foogcc' not found
  make[1]: *** [scripts/kconfig/Makefile;82: defconfig] Error 1
  make: *** [Makefile;557: defconfig] Error 2

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 Makefile                | 2 +-
 scripts/Kconfig.include | 8 ++++++++
 2 files changed, 9 insertions(+), 1 deletion(-)

Comments

Masahiro Yamada May 13, 2019, 2:27 a.m. UTC | #1
On Thu, May 9, 2019 at 4:36 PM Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
>
> If the compiler specified by $(CC) is not present, the Kconfig stage
> sprinkles 'not found' messages, then succeeds.
>
>   $ make CROSS_COMPILE=foo defconfig
>   /bin/sh: 1: foogcc: not found
>   /bin/sh: 1: foogcc: not found
>   *** Default configuration is based on 'x86_64_defconfig'
>   ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
>   ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
>   ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
>   ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
>   ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
>   ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
>   ./scripts/clang-version.sh: 11: ./scripts/clang-version.sh: foogcc: not found
>   ./scripts/gcc-plugin.sh: 11: ./scripts/gcc-plugin.sh: foogcc: not found
>   init/Kconfig:16:warning: 'GCC_VERSION': number is invalid
>   #
>   # configuration written to .config
>   #
>
> Terminate parsing files immediately if $(CC) or $(LD) is not found.
> "make *config" will fail more nicely.
>
>   $ make CROSS_COMPILE=foo defconfig
>   *** Default configuration is based on 'x86_64_defconfig'
>   scripts/Kconfig.include:34: compiler 'foogcc' not found
>   make[1]: *** [scripts/kconfig/Makefile;82: defconfig] Error 1
>   make: *** [Makefile;557: defconfig] Error 2
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> ---

Applied to linux-kbuild.


>  Makefile                | 2 +-
>  scripts/Kconfig.include | 8 ++++++++
>  2 files changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/Makefile b/Makefile
> index 28965187c528..bd7ae11947cb 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -537,7 +537,7 @@ endif
>  # Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile.
>  # CC_VERSION_TEXT is referenced from Kconfig (so it needs export),
>  # and from include/config/auto.conf.cmd to detect the compiler upgrade.
> -CC_VERSION_TEXT = $(shell $(CC) --version | head -n 1)
> +CC_VERSION_TEXT = $(shell $(CC) --version 2>/dev/null | head -n 1)
>
>  ifeq ($(config-targets),1)
>  # ===========================================================================
> diff --git a/scripts/Kconfig.include b/scripts/Kconfig.include
> index 87ff1dcc6bd5..0b267fb27f07 100644
> --- a/scripts/Kconfig.include
> +++ b/scripts/Kconfig.include
> @@ -18,6 +18,10 @@ if-success = $(shell,{ $(1); } >/dev/null 2>&1 && echo "$(2)" || echo "$(3)")
>  # Return y if <command> exits with 0, n otherwise
>  success = $(if-success,$(1),y,n)
>
> +# $(failure,<command>)
> +# Return n if <command> exits with 0, y otherwise
> +failure = $(if-success,$(1),n,y)
> +
>  # $(cc-option,<flag>)
>  # Return y if the compiler supports <flag>, n otherwise
>  cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
> @@ -26,5 +30,9 @@ cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
>  # Return y if the linker supports <flag>, n otherwise
>  ld-option = $(success,$(LD) -v $(1))
>
> +# check if $(CC) and $(LD) exist
> +$(error-if,$(failure,command -v $(CC)),compiler '$(CC)' not found)
> +$(error-if,$(failure,command -v $(LD)),linker '$(LD)' not found)
> +
>  # gcc version including patch level
>  gcc-version := $(shell,$(srctree)/scripts/gcc-version.sh $(CC))
> --
> 2.17.1
>
Joel Stanley May 13, 2019, 2:35 a.m. UTC | #2
On Mon, 13 May 2019 at 02:28, Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
>
> On Thu, May 9, 2019 at 4:36 PM Masahiro Yamada
> <yamada.masahiro@socionext.com> wrote:
> >
> > If the compiler specified by $(CC) is not present, the Kconfig stage
> > sprinkles 'not found' messages, then succeeds.
> >
> >   $ make CROSS_COMPILE=foo defconfig
> >   /bin/sh: 1: foogcc: not found
> >   /bin/sh: 1: foogcc: not found
> >   *** Default configuration is based on 'x86_64_defconfig'
> >   ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
> >   ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
> >   ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
> >   ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
> >   ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
> >   ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
> >   ./scripts/clang-version.sh: 11: ./scripts/clang-version.sh: foogcc: not found
> >   ./scripts/gcc-plugin.sh: 11: ./scripts/gcc-plugin.sh: foogcc: not found
> >   init/Kconfig:16:warning: 'GCC_VERSION': number is invalid
> >   #
> >   # configuration written to .config
> >   #
> >
> > Terminate parsing files immediately if $(CC) or $(LD) is not found.
> > "make *config" will fail more nicely.
> >
> >   $ make CROSS_COMPILE=foo defconfig
> >   *** Default configuration is based on 'x86_64_defconfig'
> >   scripts/Kconfig.include:34: compiler 'foogcc' not found
> >   make[1]: *** [scripts/kconfig/Makefile;82: defconfig] Error 1
> >   make: *** [Makefile;557: defconfig] Error 2
> >
> > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> > ---
>
> Applied to linux-kbuild.

Thanks Masahiro! I had this in my inbox to test but you're too efficient.

Testing your patch on linus' tree as of today (d7a02fa0a8f9) gives me
this output:

$ CROSS_COMPILE=foo  make
make: foogcc: Command not found
scripts/kconfig/conf  --syncconfig Kconfig
scripts/Kconfig.include:34: compiler 'foogcc' not found
make[2]: *** [scripts/kconfig/Makefile:69: syncconfig] Error 1
make[1]: *** [Makefile:557: syncconfig] Error 2
make: *** [include/config/auto.conf.cmd] Deleting file
'include/config/tristate.conf'
make: Failed to remake makefile 'include/config/auto.conf'.
  SYSTBL  arch/x86/include/generated/asm/syscalls_32.h
  SYSHDR  arch/x86/include/generated/asm/unistd_32_ia32.h
  SYSHDR  arch/x86/include/generated/asm/unistd_64_x32.h
  SYSTBL  arch/x86/include/generated/asm/syscalls_64.h
  SYSHDR  arch/x86/include/generated/uapi/asm/unistd_32.h
  SYSHDR  arch/x86/include/generated/uapi/asm/unistd_64.h
  SYSHDR  arch/x86/include/generated/uapi/asm/unistd_x32.h
  HOSTCC  arch/x86/tools/relocs_32.o
  HOSTCC  arch/x86/tools/relocs_64.o
  HOSTCC  arch/x86/tools/relocs_common.o
  HOSTLD  arch/x86/tools/relocs
  UPD     include/config/kernel.release
  WRAP    arch/x86/include/generated/uapi/asm/bpf_perf_event.h
  WRAP    arch/x86/include/generated/uapi/asm/poll.h
  WRAP    arch/x86/include/generated/uapi/asm/socket.h
  WRAP    arch/x86/include/generated/uapi/asm/sockios.h
  WRAP    arch/x86/include/generated/asm/dma-contiguous.h
  WRAP    arch/x86/include/generated/asm/early_ioremap.h
  WRAP    arch/x86/include/generated/asm/export.h
  WRAP    arch/x86/include/generated/asm/mcs_spinlock.h
  WRAP    arch/x86/include/generated/asm/mm-arch-hooks.h
  WRAP    arch/x86/include/generated/asm/mmiowb.h
  UPD     include/generated/uapi/linux/version.h
  UPD     include/generated/utsrelease.h
  HOSTCC  scripts/selinux/genheaders/genheaders
  HOSTCC  scripts/selinux/mdp/mdp
  HOSTCC  scripts/kallsyms
  HOSTCC  scripts/pnmtologo
  HOSTCC  scripts/conmakehash
  HOSTCC  scripts/sortextable
  HOSTCC  scripts/asn1_compiler
  HOSTCC  scripts/extract-cert
You are building kernel with non-retpoline compiler.
Please update your compiler.
make: *** [arch/x86/Makefile:308: checkbin] Error 1

Which is a little confusing.

The second time is shorter, but the retpoline message is not ideal:

$ CROSS_COMPILE=foo  make
make: foogcc: Command not found
scripts/kconfig/conf  --syncconfig Kconfig
scripts/Kconfig.include:34: compiler 'foogcc' not found
make[2]: *** [scripts/kconfig/Makefile:69: syncconfig] Error 1
make[1]: *** [Makefile:557: syncconfig] Error 2
make: Failed to remake makefile 'include/config/auto.conf'.
You are building kernel with non-retpoline compiler.
Please update your compiler.

Cheers,

Joel

>
>
> >  Makefile                | 2 +-
> >  scripts/Kconfig.include | 8 ++++++++
> >  2 files changed, 9 insertions(+), 1 deletion(-)
> >
> > diff --git a/Makefile b/Makefile
> > index 28965187c528..bd7ae11947cb 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -537,7 +537,7 @@ endif
> >  # Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile.
> >  # CC_VERSION_TEXT is referenced from Kconfig (so it needs export),
> >  # and from include/config/auto.conf.cmd to detect the compiler upgrade.
> > -CC_VERSION_TEXT = $(shell $(CC) --version | head -n 1)
> > +CC_VERSION_TEXT = $(shell $(CC) --version 2>/dev/null | head -n 1)
> >
> >  ifeq ($(config-targets),1)
> >  # ===========================================================================
> > diff --git a/scripts/Kconfig.include b/scripts/Kconfig.include
> > index 87ff1dcc6bd5..0b267fb27f07 100644
> > --- a/scripts/Kconfig.include
> > +++ b/scripts/Kconfig.include
> > @@ -18,6 +18,10 @@ if-success = $(shell,{ $(1); } >/dev/null 2>&1 && echo "$(2)" || echo "$(3)")
> >  # Return y if <command> exits with 0, n otherwise
> >  success = $(if-success,$(1),y,n)
> >
> > +# $(failure,<command>)
> > +# Return n if <command> exits with 0, y otherwise
> > +failure = $(if-success,$(1),n,y)
> > +
> >  # $(cc-option,<flag>)
> >  # Return y if the compiler supports <flag>, n otherwise
> >  cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
> > @@ -26,5 +30,9 @@ cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
> >  # Return y if the linker supports <flag>, n otherwise
> >  ld-option = $(success,$(LD) -v $(1))
> >
> > +# check if $(CC) and $(LD) exist
> > +$(error-if,$(failure,command -v $(CC)),compiler '$(CC)' not found)
> > +$(error-if,$(failure,command -v $(LD)),linker '$(LD)' not found)
> > +
> >  # gcc version including patch level
> >  gcc-version := $(shell,$(srctree)/scripts/gcc-version.sh $(CC))
> > --
> > 2.17.1
> >
>
>
> --
> Best Regards
> Masahiro Yamada
Masahiro Yamada May 13, 2019, 2:49 a.m. UTC | #3
On Mon, May 13, 2019 at 11:35 AM Joel Stanley <joel@jms.id.au> wrote:
>
> On Mon, 13 May 2019 at 02:28, Masahiro Yamada
> <yamada.masahiro@socionext.com> wrote:
> >
> > On Thu, May 9, 2019 at 4:36 PM Masahiro Yamada
> > <yamada.masahiro@socionext.com> wrote:
> > >
> > > If the compiler specified by $(CC) is not present, the Kconfig stage
> > > sprinkles 'not found' messages, then succeeds.
> > >
> > >   $ make CROSS_COMPILE=foo defconfig
> > >   /bin/sh: 1: foogcc: not found
> > >   /bin/sh: 1: foogcc: not found
> > >   *** Default configuration is based on 'x86_64_defconfig'
> > >   ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
> > >   ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
> > >   ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
> > >   ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
> > >   ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
> > >   ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
> > >   ./scripts/clang-version.sh: 11: ./scripts/clang-version.sh: foogcc: not found
> > >   ./scripts/gcc-plugin.sh: 11: ./scripts/gcc-plugin.sh: foogcc: not found
> > >   init/Kconfig:16:warning: 'GCC_VERSION': number is invalid
> > >   #
> > >   # configuration written to .config
> > >   #
> > >
> > > Terminate parsing files immediately if $(CC) or $(LD) is not found.
> > > "make *config" will fail more nicely.
> > >
> > >   $ make CROSS_COMPILE=foo defconfig
> > >   *** Default configuration is based on 'x86_64_defconfig'
> > >   scripts/Kconfig.include:34: compiler 'foogcc' not found
> > >   make[1]: *** [scripts/kconfig/Makefile;82: defconfig] Error 1
> > >   make: *** [Makefile;557: defconfig] Error 2
> > >
> > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> > > ---
> >
> > Applied to linux-kbuild.
>
> Thanks Masahiro! I had this in my inbox to test but you're too efficient.
>
> Testing your patch on linus' tree as of today (d7a02fa0a8f9) gives me
> this output:
>
> $ CROSS_COMPILE=foo  make
> make: foogcc: Command not found
> scripts/kconfig/conf  --syncconfig Kconfig
> scripts/Kconfig.include:34: compiler 'foogcc' not found
> make[2]: *** [scripts/kconfig/Makefile:69: syncconfig] Error 1
> make[1]: *** [Makefile:557: syncconfig] Error 2
> make: *** [include/config/auto.conf.cmd] Deleting file
> 'include/config/tristate.conf'
> make: Failed to remake makefile 'include/config/auto.conf'.
>   SYSTBL  arch/x86/include/generated/asm/syscalls_32.h
>   SYSHDR  arch/x86/include/generated/asm/unistd_32_ia32.h
>   SYSHDR  arch/x86/include/generated/asm/unistd_64_x32.h
>   SYSTBL  arch/x86/include/generated/asm/syscalls_64.h
>   SYSHDR  arch/x86/include/generated/uapi/asm/unistd_32.h
>   SYSHDR  arch/x86/include/generated/uapi/asm/unistd_64.h
>   SYSHDR  arch/x86/include/generated/uapi/asm/unistd_x32.h
>   HOSTCC  arch/x86/tools/relocs_32.o
>   HOSTCC  arch/x86/tools/relocs_64.o
>   HOSTCC  arch/x86/tools/relocs_common.o
>   HOSTLD  arch/x86/tools/relocs
>   UPD     include/config/kernel.release
>   WRAP    arch/x86/include/generated/uapi/asm/bpf_perf_event.h
>   WRAP    arch/x86/include/generated/uapi/asm/poll.h
>   WRAP    arch/x86/include/generated/uapi/asm/socket.h
>   WRAP    arch/x86/include/generated/uapi/asm/sockios.h
>   WRAP    arch/x86/include/generated/asm/dma-contiguous.h
>   WRAP    arch/x86/include/generated/asm/early_ioremap.h
>   WRAP    arch/x86/include/generated/asm/export.h
>   WRAP    arch/x86/include/generated/asm/mcs_spinlock.h
>   WRAP    arch/x86/include/generated/asm/mm-arch-hooks.h
>   WRAP    arch/x86/include/generated/asm/mmiowb.h
>   UPD     include/generated/uapi/linux/version.h
>   UPD     include/generated/utsrelease.h
>   HOSTCC  scripts/selinux/genheaders/genheaders
>   HOSTCC  scripts/selinux/mdp/mdp
>   HOSTCC  scripts/kallsyms
>   HOSTCC  scripts/pnmtologo
>   HOSTCC  scripts/conmakehash
>   HOSTCC  scripts/sortextable
>   HOSTCC  scripts/asn1_compiler
>   HOSTCC  scripts/extract-cert
> You are building kernel with non-retpoline compiler.
> Please update your compiler.
> make: *** [arch/x86/Makefile:308: checkbin] Error 1
>
> Which is a little confusing.
>
> The second time is shorter, but the retpoline message is not ideal:
>
> $ CROSS_COMPILE=foo  make
> make: foogcc: Command not found
> scripts/kconfig/conf  --syncconfig Kconfig
> scripts/Kconfig.include:34: compiler 'foogcc' not found
> make[2]: *** [scripts/kconfig/Makefile:69: syncconfig] Error 1
> make[1]: *** [Makefile:557: syncconfig] Error 2
> make: Failed to remake makefile 'include/config/auto.conf'.
> You are building kernel with non-retpoline compiler.
> Please update your compiler.


I think you are seeing a different bug.

Please test after applying this as well:
https://patchwork.kernel.org/patch/10939845/


Thanks.
Joel Stanley May 13, 2019, 4:07 a.m. UTC | #4
On Mon, 13 May 2019 at 02:50, Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
> > $ CROSS_COMPILE=foo  make
> > make: foogcc: Command not found
> > scripts/kconfig/conf  --syncconfig Kconfig
> > scripts/Kconfig.include:34: compiler 'foogcc' not found
> > make[2]: *** [scripts/kconfig/Makefile:69: syncconfig] Error 1
> > make[1]: *** [Makefile:557: syncconfig] Error 2
> > make: Failed to remake makefile 'include/config/auto.conf'.
> > You are building kernel with non-retpoline compiler.
> > Please update your compiler.
>
>
> I think you are seeing a different bug.
>
> Please test after applying this as well:
> https://patchwork.kernel.org/patch/10939845/

That did the trick. Thank you.

Cheers,

Joel
Nathan Chancellor May 13, 2019, 4:47 a.m. UTC | #5
On Thu, May 09, 2019 at 04:35:55PM +0900, Masahiro Yamada wrote:
> If the compiler specified by $(CC) is not present, the Kconfig stage
> sprinkles 'not found' messages, then succeeds.
> 
>   $ make CROSS_COMPILE=foo defconfig
>   /bin/sh: 1: foogcc: not found
>   /bin/sh: 1: foogcc: not found
>   *** Default configuration is based on 'x86_64_defconfig'
>   ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
>   ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
>   ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
>   ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
>   ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
>   ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
>   ./scripts/clang-version.sh: 11: ./scripts/clang-version.sh: foogcc: not found
>   ./scripts/gcc-plugin.sh: 11: ./scripts/gcc-plugin.sh: foogcc: not found
>   init/Kconfig:16:warning: 'GCC_VERSION': number is invalid
>   #
>   # configuration written to .config
>   #
> 
> Terminate parsing files immediately if $(CC) or $(LD) is not found.
> "make *config" will fail more nicely.
> 
>   $ make CROSS_COMPILE=foo defconfig
>   *** Default configuration is based on 'x86_64_defconfig'
>   scripts/Kconfig.include:34: compiler 'foogcc' not found
>   make[1]: *** [scripts/kconfig/Makefile;82: defconfig] Error 1
>   make: *** [Makefile;557: defconfig] Error 2
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> ---
> 
>  Makefile                | 2 +-
>  scripts/Kconfig.include | 8 ++++++++
>  2 files changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/Makefile b/Makefile
> index 28965187c528..bd7ae11947cb 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -537,7 +537,7 @@ endif
>  # Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile.
>  # CC_VERSION_TEXT is referenced from Kconfig (so it needs export),
>  # and from include/config/auto.conf.cmd to detect the compiler upgrade.
> -CC_VERSION_TEXT = $(shell $(CC) --version | head -n 1)
> +CC_VERSION_TEXT = $(shell $(CC) --version 2>/dev/null | head -n 1)
>  
>  ifeq ($(config-targets),1)
>  # ===========================================================================
> diff --git a/scripts/Kconfig.include b/scripts/Kconfig.include
> index 87ff1dcc6bd5..0b267fb27f07 100644
> --- a/scripts/Kconfig.include
> +++ b/scripts/Kconfig.include
> @@ -18,6 +18,10 @@ if-success = $(shell,{ $(1); } >/dev/null 2>&1 && echo "$(2)" || echo "$(3)")
>  # Return y if <command> exits with 0, n otherwise
>  success = $(if-success,$(1),y,n)
>  
> +# $(failure,<command>)
> +# Return n if <command> exits with 0, y otherwise
> +failure = $(if-success,$(1),n,y)
> +
>  # $(cc-option,<flag>)
>  # Return y if the compiler supports <flag>, n otherwise
>  cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
> @@ -26,5 +30,9 @@ cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
>  # Return y if the linker supports <flag>, n otherwise
>  ld-option = $(success,$(LD) -v $(1))
>  
> +# check if $(CC) and $(LD) exist
> +$(error-if,$(failure,command -v $(CC)),compiler '$(CC)' not found)
> +$(error-if,$(failure,command -v $(LD)),linker '$(LD)' not found)

As mentioned in the other thread, $(AS) should be checked as well since
it's possible that neither $(CC) nor $(LD) will involve $(CROSS_COMPILE),
like the combination of clang + ld.lld, whereas $(AS) will (currently)
always involve $(CROSS_COMPILE).

> +
>  # gcc version including patch level
>  gcc-version := $(shell,$(srctree)/scripts/gcc-version.sh $(CC))
> -- 
> 2.17.1
>
Masahiro Yamada May 14, 2019, 2:54 a.m. UTC | #6
On Mon, May 13, 2019 at 1:47 PM Nathan Chancellor
<natechancellor@gmail.com> wrote:
>
> On Thu, May 09, 2019 at 04:35:55PM +0900, Masahiro Yamada wrote:
> > If the compiler specified by $(CC) is not present, the Kconfig stage
> > sprinkles 'not found' messages, then succeeds.
> >
> >   $ make CROSS_COMPILE=foo defconfig
> >   /bin/sh: 1: foogcc: not found
> >   /bin/sh: 1: foogcc: not found
> >   *** Default configuration is based on 'x86_64_defconfig'
> >   ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
> >   ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
> >   ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
> >   ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
> >   ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
> >   ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
> >   ./scripts/clang-version.sh: 11: ./scripts/clang-version.sh: foogcc: not found
> >   ./scripts/gcc-plugin.sh: 11: ./scripts/gcc-plugin.sh: foogcc: not found
> >   init/Kconfig:16:warning: 'GCC_VERSION': number is invalid
> >   #
> >   # configuration written to .config
> >   #
> >
> > Terminate parsing files immediately if $(CC) or $(LD) is not found.
> > "make *config" will fail more nicely.
> >
> >   $ make CROSS_COMPILE=foo defconfig
> >   *** Default configuration is based on 'x86_64_defconfig'
> >   scripts/Kconfig.include:34: compiler 'foogcc' not found
> >   make[1]: *** [scripts/kconfig/Makefile;82: defconfig] Error 1
> >   make: *** [Makefile;557: defconfig] Error 2
> >
> > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> > ---
> >
> >  Makefile                | 2 +-
> >  scripts/Kconfig.include | 8 ++++++++
> >  2 files changed, 9 insertions(+), 1 deletion(-)
> >
> > diff --git a/Makefile b/Makefile
> > index 28965187c528..bd7ae11947cb 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -537,7 +537,7 @@ endif
> >  # Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile.
> >  # CC_VERSION_TEXT is referenced from Kconfig (so it needs export),
> >  # and from include/config/auto.conf.cmd to detect the compiler upgrade.
> > -CC_VERSION_TEXT = $(shell $(CC) --version | head -n 1)
> > +CC_VERSION_TEXT = $(shell $(CC) --version 2>/dev/null | head -n 1)
> >
> >  ifeq ($(config-targets),1)
> >  # ===========================================================================
> > diff --git a/scripts/Kconfig.include b/scripts/Kconfig.include
> > index 87ff1dcc6bd5..0b267fb27f07 100644
> > --- a/scripts/Kconfig.include
> > +++ b/scripts/Kconfig.include
> > @@ -18,6 +18,10 @@ if-success = $(shell,{ $(1); } >/dev/null 2>&1 && echo "$(2)" || echo "$(3)")
> >  # Return y if <command> exits with 0, n otherwise
> >  success = $(if-success,$(1),y,n)
> >
> > +# $(failure,<command>)
> > +# Return n if <command> exits with 0, y otherwise
> > +failure = $(if-success,$(1),n,y)
> > +
> >  # $(cc-option,<flag>)
> >  # Return y if the compiler supports <flag>, n otherwise
> >  cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
> > @@ -26,5 +30,9 @@ cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
> >  # Return y if the linker supports <flag>, n otherwise
> >  ld-option = $(success,$(LD) -v $(1))
> >
> > +# check if $(CC) and $(LD) exist
> > +$(error-if,$(failure,command -v $(CC)),compiler '$(CC)' not found)
> > +$(error-if,$(failure,command -v $(LD)),linker '$(LD)' not found)
>
> As mentioned in the other thread, $(AS) should be checked as well since
> it's possible that neither $(CC) nor $(LD) will involve $(CROSS_COMPILE),
> like the combination of clang + ld.lld, whereas $(AS) will (currently)
> always involve $(CROSS_COMPILE).

Indeed.
This patch cannot check the presence of the intended gnu toolchains
if CC=clang LD=ld.lld

The reason for $(CC) / $(LD) checks in Kconfig
is because it evaluates some $(cc-option, ...) and $(ld-option, ...) calls.

Currently, Kconfig does not have as-option, but I will add it
sooner or later, so I am fine with adding
$(error-if,$(failure,command -v $(AS)),assembler '$(AS)' not found)




> > +
> >  # gcc version including patch level
> >  gcc-version := $(shell,$(srctree)/scripts/gcc-version.sh $(CC))
> > --
> > 2.17.1
> >


--
Best Regards
Masahiro Yamada
diff mbox series

Patch

diff --git a/Makefile b/Makefile
index 28965187c528..bd7ae11947cb 100644
--- a/Makefile
+++ b/Makefile
@@ -537,7 +537,7 @@  endif
 # Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile.
 # CC_VERSION_TEXT is referenced from Kconfig (so it needs export),
 # and from include/config/auto.conf.cmd to detect the compiler upgrade.
-CC_VERSION_TEXT = $(shell $(CC) --version | head -n 1)
+CC_VERSION_TEXT = $(shell $(CC) --version 2>/dev/null | head -n 1)
 
 ifeq ($(config-targets),1)
 # ===========================================================================
diff --git a/scripts/Kconfig.include b/scripts/Kconfig.include
index 87ff1dcc6bd5..0b267fb27f07 100644
--- a/scripts/Kconfig.include
+++ b/scripts/Kconfig.include
@@ -18,6 +18,10 @@  if-success = $(shell,{ $(1); } >/dev/null 2>&1 && echo "$(2)" || echo "$(3)")
 # Return y if <command> exits with 0, n otherwise
 success = $(if-success,$(1),y,n)
 
+# $(failure,<command>)
+# Return n if <command> exits with 0, y otherwise
+failure = $(if-success,$(1),n,y)
+
 # $(cc-option,<flag>)
 # Return y if the compiler supports <flag>, n otherwise
 cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
@@ -26,5 +30,9 @@  cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
 # Return y if the linker supports <flag>, n otherwise
 ld-option = $(success,$(LD) -v $(1))
 
+# check if $(CC) and $(LD) exist
+$(error-if,$(failure,command -v $(CC)),compiler '$(CC)' not found)
+$(error-if,$(failure,command -v $(LD)),linker '$(LD)' not found)
+
 # gcc version including patch level
 gcc-version := $(shell,$(srctree)/scripts/gcc-version.sh $(CC))