diff mbox series

[v2,1/2] kbuild: make single targets work more correctly

Message ID 20190814151919.16300-1-yamada.masahiro@socionext.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/2] kbuild: make single targets work more correctly | expand

Commit Message

Masahiro Yamada Aug. 14, 2019, 3:19 p.m. UTC
Currently, the single target build directly descends into the directory
of the target. For example,

  $ make foo/bar/baz.o

... directly descends into foo/bar/.

On the other hand, the normal build usually descends one directory at
a time, i.e. descends into foo/, and then foo/bar/.

This difference causes some problems.

[1] miss subdir-asflags-y, subdir-ccflags-y in upper Makefiles

    The options in subdir-{as,cc}flags-y take effect in the current
    and its sub-directories. In other words, they are inherited
    downward. In the example above, the single target will miss
    subdir-{as,cc}flags-y if they are defined in foo/Makefile.

[2] could be built in a different directory

    As Documentation/kbuild/modules.rst section 4.3 says, Kbuild can
    handle files that are spread over several sub-directories.

    The build rule of foo/bar/baz.o may not necessarily be specified in
    foo/bar/Makefile. It might be specifies in foo/Makefile as follows:

    [foo/Makefile]
    obj-y := bar/baz.o

    This often happens when a module is so big that its source files
    are divided into sub-directories.

    In this case, there is no Makefile in the foo/bar/ directory, yet
    the single target descends into foo/bar/, then fails due to the
    missing Makefile. You can still do 'make foo/bar/' for partial
    building, but cannot do 'make foo/bar/baz.s'. I believe the single
    target '%.s' is a useful feature for inspecting the compiler output.

    Some modules work around this issue by putting an empty Makefile
    in every sub-directory.

This commit fixes those problems by making the single target build
descend in the same way as the normal build does.

Another change is the single target build will observe the CONFIG
options. Previously, it allowed users to build the foo.o even when
the corresponding CONFIG_FOO is disabled:

   obj-$(CONFIG_FOO) += foo.o

In the new behavior, the single target build will just fail and show
"No rule to make target ..." (or "Nothing to be done for ..." if the
stale object already exists, but cannot be updated).

The disadvantage of this commit is the build speed. Now that the
single target build visits every directory and parses lots of
Makefiles, it is slower than before. (But, I hope it will not be
too slow.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

Changes in v2:
 - Fix single targets for external module build

 Makefile               | 84 ++++++++++++++++++++++++++----------------
 scripts/Makefile.build | 45 +++++++++++++++++++---
 2 files changed, 92 insertions(+), 37 deletions(-)

Comments

Masahiro Yamada Aug. 19, 2019, 3:10 p.m. UTC | #1
On Thu, Aug 15, 2019 at 12:19 AM Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
>
> Currently, the single target build directly descends into the directory
> of the target. For example,
>
>   $ make foo/bar/baz.o
>
> ... directly descends into foo/bar/.
>
> On the other hand, the normal build usually descends one directory at
> a time, i.e. descends into foo/, and then foo/bar/.
>
> This difference causes some problems.
>
> [1] miss subdir-asflags-y, subdir-ccflags-y in upper Makefiles
>
>     The options in subdir-{as,cc}flags-y take effect in the current
>     and its sub-directories. In other words, they are inherited
>     downward. In the example above, the single target will miss
>     subdir-{as,cc}flags-y if they are defined in foo/Makefile.
>
> [2] could be built in a different directory
>
>     As Documentation/kbuild/modules.rst section 4.3 says, Kbuild can
>     handle files that are spread over several sub-directories.
>
>     The build rule of foo/bar/baz.o may not necessarily be specified in
>     foo/bar/Makefile. It might be specifies in foo/Makefile as follows:
>
>     [foo/Makefile]
>     obj-y := bar/baz.o
>
>     This often happens when a module is so big that its source files
>     are divided into sub-directories.
>
>     In this case, there is no Makefile in the foo/bar/ directory, yet
>     the single target descends into foo/bar/, then fails due to the
>     missing Makefile. You can still do 'make foo/bar/' for partial
>     building, but cannot do 'make foo/bar/baz.s'. I believe the single
>     target '%.s' is a useful feature for inspecting the compiler output.
>
>     Some modules work around this issue by putting an empty Makefile
>     in every sub-directory.
>
> This commit fixes those problems by making the single target build
> descend in the same way as the normal build does.
>
> Another change is the single target build will observe the CONFIG
> options. Previously, it allowed users to build the foo.o even when
> the corresponding CONFIG_FOO is disabled:
>
>    obj-$(CONFIG_FOO) += foo.o
>
> In the new behavior, the single target build will just fail and show
> "No rule to make target ..." (or "Nothing to be done for ..." if the
> stale object already exists, but cannot be updated).
>
> The disadvantage of this commit is the build speed. Now that the
> single target build visits every directory and parses lots of
> Makefiles, it is slower than before. (But, I hope it will not be
> too slow.)
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> ---

Both applied.


> Changes in v2:
>  - Fix single targets for external module build
>
>  Makefile               | 84 ++++++++++++++++++++++++++----------------
>  scripts/Makefile.build | 45 +++++++++++++++++++---
>  2 files changed, 92 insertions(+), 37 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index 9661fa37158f..164ca615e2f6 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -230,6 +230,8 @@ endif
>
>  export KBUILD_CHECKSRC KBUILD_EXTMOD
>
> +extmod-prefix = $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)
> +
>  ifeq ($(abs_srctree),$(abs_objtree))
>          # building in the source tree
>          srctree := .
> @@ -271,11 +273,16 @@ no-dot-config-targets := $(clean-targets) \
>                          %asm-generic kernelversion %src-pkg
>  no-sync-config-targets := $(no-dot-config-targets) install %install \
>                            kernelrelease
> +single-targets := %.a %.i %.ko %.lds %.lst %.mod %.o %.s %.symtypes %/
> +ifdef CONFIG_CC_IS_CLANG
> +single-targets += %.ll
> +endif
>
>  config-build   :=
>  mixed-build    :=
>  need-config    := 1
>  may-sync-config        := 1
> +single-build   :=
>
>  ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
>         ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
> @@ -302,6 +309,14 @@ ifeq ($(KBUILD_EXTMOD),)
>          endif
>  endif
>
> +# We cannot build single targets and the others at the same time
> +ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),)
> +       single-build := 1
> +       ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),)
> +               mixed-build := 1
> +       endif
> +endif
> +
>  # For "make -j clean all", "make -j mrproper defconfig all", etc.
>  ifneq ($(filter $(clean-targets),$(MAKECMDGOALS)),)
>          ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),)
> @@ -1003,7 +1018,7 @@ endif
>
>  PHONY += prepare0
>
> -export MODORDER := $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)modules.order
> +export MODORDER := $(extmod-prefix)modules.order
>
>  ifeq ($(KBUILD_EXTMOD),)
>  core-y         += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
> @@ -1655,7 +1670,7 @@ endif # KBUILD_EXTMOD
>  PHONY += descend $(build-dirs)
>  descend: $(build-dirs)
>  $(build-dirs): prepare
> -       $(Q)$(MAKE) $(build)=$@ need-builtin=1 need-modorder=1
> +       $(Q)$(MAKE) $(build)=$@ single-build=$(single-build) need-builtin=1 need-modorder=1
>
>  clean-dirs := $(addprefix _clean_, $(clean-dirs))
>  PHONY += $(clean-dirs) clean
> @@ -1752,40 +1767,47 @@ tools/%: FORCE
>
>  # Single targets
>  # ---------------------------------------------------------------------------
> -# Single targets are compatible with:
> -# - build with mixed source and output
> -# - build with separate output dir 'make O=...'
> -# - external modules
> +# To build individual files in subdirectories, you can do like this:
> +#
> +#   make foo/bar/baz.s
> +#
> +# The supported suffixes for single-target are listed in 'single-targets'
>  #
> -#  target-dir => where to store outputfile
> -#  build-dir  => directory in kernel source tree to use
> -
> -build-target = $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD)/)$@
> -build-dir = $(patsubst %/,%,$(dir $(build-target)))
> -
> -%.i: prepare FORCE
> -       $(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
> -%.ll: prepare FORCE
> -       $(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
> -%.lst: prepare FORCE
> -       $(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
> -%.o: prepare FORCE
> -       $(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
> -%.s: prepare FORCE
> -       $(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
> -%.symtypes: prepare FORCE
> -       $(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
> +# To build only under specific subdirectories, you can do like this:
> +#
> +#   make foo/bar/baz/
> +
> +ifdef single-build
> +
> +single-all := $(filter $(single-targets), $(MAKECMDGOALS))
> +
> +# .ko is special because modpost is needed
> +single-ko := $(sort $(filter %.ko, $(single-all)))
> +single-no-ko := $(sort $(patsubst %.ko,%.mod, $(single-all)))
> +
> +$(single-ko): single_modpost
> +       @:
> +$(single-no-ko): descend
> +       @:
> +
>  ifeq ($(KBUILD_EXTMOD),)
> -# For the single build of an in-tree module, use a temporary file to avoid
> +# For the single build of in-tree modules, use a temporary file to avoid
>  # the situation of modules_install installing an invalid modules.order.
> -%.ko: MODORDER := .modules.tmp
> +MODORDER := .modules.tmp
>  endif
> -%.ko: prepare FORCE
> -       $(Q)$(MAKE) $(build)=$(build-dir) $(build-target:.ko=.mod)
> -       $(Q)echo $(build-target) > $(MODORDER)
> +
> +PHONY += single_modpost
> +single_modpost: $(single-no-ko)
> +       $(Q){ $(foreach m, $(single-ko), echo $(extmod-prefix)$m;) } > $(MODORDER)
>         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
> -%/: prepare FORCE
> -       $(Q)$(MAKE) KBUILD_MODULES=1 $(build)=$(build-dir) need-modorder=1
> +
> +KBUILD_MODULES := 1
> +
> +export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod-prefix), $(single-no-ko))
> +
> +single-build = $(if $(filter-out $@/, $(single-no-ko)),1)
> +
> +endif
>
>  # FIXME Should go into a make.lib or something
>  # ===========================================================================
> diff --git a/scripts/Makefile.build b/scripts/Makefile.build
> index f84ccca8d74f..10adf3b558de 100644
> --- a/scripts/Makefile.build
> +++ b/scripts/Makefile.build
> @@ -52,7 +52,7 @@ ifndef obj
>  $(warning kbuild: Makefile.build is included improperly)
>  endif
>
> -ifeq ($(MAKECMDGOALS)$(need-modorder),)
> +ifeq ($(need-modorder),)
>  ifneq ($(obj-m),)
>  $(warning $(patsubst %.o,'%.ko',$(obj-m)) will not be built even though obj-m is specified.)
>  $(warning You cannot use subdir-y/m to visit a module Makefile. Use obj-y/m instead.)
> @@ -76,11 +76,6 @@ endif
>
>  mod-targets := $(patsubst %.o, %.mod, $(obj-m))
>
> -__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
> -        $(if $(KBUILD_MODULES),$(obj-m) $(mod-targets) $(modorder-target)) \
> -        $(subdir-ym) $(always)
> -       @:
> -
>  # Linus' kernel sanity checking tool
>  ifeq ($(KBUILD_CHECKSRC),1)
>    quiet_cmd_checksrc       = CHECK   $<
> @@ -487,12 +482,50 @@ targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \
>            $(call intermediate_targets, .lex.o, .lex.c) \
>            $(call intermediate_targets, .tab.o, .tab.c .tab.h)
>
> +# Build
> +# ---------------------------------------------------------------------------
> +
> +ifdef single-build
> +
> +curdir-single := $(sort $(foreach x, $(KBUILD_SINGLE_TARGETS), \
> +                       $(if $(filter $(x) $(basename $(x)).o, $(targets)), $(x))))
> +
> +# Handle single targets without any rule: show "Nothing to be done for ..." or
> +# "No rule to make target ..." depending on whether the target exists.
> +unknown-single := $(filter-out $(addsuffix /%, $(subdir-ym)), \
> +                       $(filter $(obj)/%, \
> +                               $(filter-out $(curdir-single), \
> +                                       $(KBUILD_SINGLE_TARGETS))))
> +
> +__build: $(curdir-single) $(subdir-ym)
> +ifneq ($(unknown-single),)
> +       $(Q)$(MAKE) -f /dev/null $(unknown-single)
> +endif
> +       @:
> +
> +ifeq ($(curdir-single),)
> +# Nothing to do in this directory. Do not include any .*.cmd file for speed-up
> +targets :=
> +else
> +targets += $(curdir-single)
> +endif
> +
> +else
> +
> +__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
> +        $(if $(KBUILD_MODULES),$(obj-m) $(mod-targets) $(modorder-target)) \
> +        $(subdir-ym) $(always)
> +       @:
> +
> +endif
> +
>  # Descending
>  # ---------------------------------------------------------------------------
>
>  PHONY += $(subdir-ym)
>  $(subdir-ym):
>         $(Q)$(MAKE) $(build)=$@ \
> +       $(if $(filter $@/, $(KBUILD_SINGLE_TARGETS)),single-build=) \
>         need-builtin=$(if $(filter $@/built-in.a, $(subdir-obj-y)),1) \
>         need-modorder=$(if $(need-modorder),$(if $(filter $@/modules.order, $(modorder)),1))
>
> --
> 2.17.1
>
diff mbox series

Patch

diff --git a/Makefile b/Makefile
index 9661fa37158f..164ca615e2f6 100644
--- a/Makefile
+++ b/Makefile
@@ -230,6 +230,8 @@  endif
 
 export KBUILD_CHECKSRC KBUILD_EXTMOD
 
+extmod-prefix = $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)
+
 ifeq ($(abs_srctree),$(abs_objtree))
         # building in the source tree
         srctree := .
@@ -271,11 +273,16 @@  no-dot-config-targets := $(clean-targets) \
 			 %asm-generic kernelversion %src-pkg
 no-sync-config-targets := $(no-dot-config-targets) install %install \
 			   kernelrelease
+single-targets := %.a %.i %.ko %.lds %.lst %.mod %.o %.s %.symtypes %/
+ifdef CONFIG_CC_IS_CLANG
+single-targets += %.ll
+endif
 
 config-build	:=
 mixed-build	:=
 need-config	:= 1
 may-sync-config	:= 1
+single-build	:=
 
 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
 	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
@@ -302,6 +309,14 @@  ifeq ($(KBUILD_EXTMOD),)
         endif
 endif
 
+# We cannot build single targets and the others at the same time
+ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),)
+	single-build := 1
+	ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),)
+		mixed-build := 1
+	endif
+endif
+
 # For "make -j clean all", "make -j mrproper defconfig all", etc.
 ifneq ($(filter $(clean-targets),$(MAKECMDGOALS)),)
         ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),)
@@ -1003,7 +1018,7 @@  endif
 
 PHONY += prepare0
 
-export MODORDER := $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)modules.order
+export MODORDER := $(extmod-prefix)modules.order
 
 ifeq ($(KBUILD_EXTMOD),)
 core-y		+= kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
@@ -1655,7 +1670,7 @@  endif # KBUILD_EXTMOD
 PHONY += descend $(build-dirs)
 descend: $(build-dirs)
 $(build-dirs): prepare
-	$(Q)$(MAKE) $(build)=$@ need-builtin=1 need-modorder=1
+	$(Q)$(MAKE) $(build)=$@ single-build=$(single-build) need-builtin=1 need-modorder=1
 
 clean-dirs := $(addprefix _clean_, $(clean-dirs))
 PHONY += $(clean-dirs) clean
@@ -1752,40 +1767,47 @@  tools/%: FORCE
 
 # Single targets
 # ---------------------------------------------------------------------------
-# Single targets are compatible with:
-# - build with mixed source and output
-# - build with separate output dir 'make O=...'
-# - external modules
+# To build individual files in subdirectories, you can do like this:
+#
+#   make foo/bar/baz.s
+#
+# The supported suffixes for single-target are listed in 'single-targets'
 #
-#  target-dir => where to store outputfile
-#  build-dir  => directory in kernel source tree to use
-
-build-target = $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD)/)$@
-build-dir = $(patsubst %/,%,$(dir $(build-target)))
-
-%.i: prepare FORCE
-	$(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
-%.ll: prepare FORCE
-	$(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
-%.lst: prepare FORCE
-	$(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
-%.o: prepare FORCE
-	$(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
-%.s: prepare FORCE
-	$(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
-%.symtypes: prepare FORCE
-	$(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
+# To build only under specific subdirectories, you can do like this:
+#
+#   make foo/bar/baz/
+
+ifdef single-build
+
+single-all := $(filter $(single-targets), $(MAKECMDGOALS))
+
+# .ko is special because modpost is needed
+single-ko := $(sort $(filter %.ko, $(single-all)))
+single-no-ko := $(sort $(patsubst %.ko,%.mod, $(single-all)))
+
+$(single-ko): single_modpost
+	@:
+$(single-no-ko): descend
+	@:
+
 ifeq ($(KBUILD_EXTMOD),)
-# For the single build of an in-tree module, use a temporary file to avoid
+# For the single build of in-tree modules, use a temporary file to avoid
 # the situation of modules_install installing an invalid modules.order.
-%.ko: MODORDER := .modules.tmp
+MODORDER := .modules.tmp
 endif
-%.ko: prepare FORCE
-	$(Q)$(MAKE) $(build)=$(build-dir) $(build-target:.ko=.mod)
-	$(Q)echo $(build-target) > $(MODORDER)
+
+PHONY += single_modpost
+single_modpost: $(single-no-ko)
+	$(Q){ $(foreach m, $(single-ko), echo $(extmod-prefix)$m;) } > $(MODORDER)
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-%/: prepare FORCE
-	$(Q)$(MAKE) KBUILD_MODULES=1 $(build)=$(build-dir) need-modorder=1
+
+KBUILD_MODULES := 1
+
+export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod-prefix), $(single-no-ko))
+
+single-build = $(if $(filter-out $@/, $(single-no-ko)),1)
+
+endif
 
 # FIXME Should go into a make.lib or something
 # ===========================================================================
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index f84ccca8d74f..10adf3b558de 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -52,7 +52,7 @@  ifndef obj
 $(warning kbuild: Makefile.build is included improperly)
 endif
 
-ifeq ($(MAKECMDGOALS)$(need-modorder),)
+ifeq ($(need-modorder),)
 ifneq ($(obj-m),)
 $(warning $(patsubst %.o,'%.ko',$(obj-m)) will not be built even though obj-m is specified.)
 $(warning You cannot use subdir-y/m to visit a module Makefile. Use obj-y/m instead.)
@@ -76,11 +76,6 @@  endif
 
 mod-targets := $(patsubst %.o, %.mod, $(obj-m))
 
-__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
-	 $(if $(KBUILD_MODULES),$(obj-m) $(mod-targets) $(modorder-target)) \
-	 $(subdir-ym) $(always)
-	@:
-
 # Linus' kernel sanity checking tool
 ifeq ($(KBUILD_CHECKSRC),1)
   quiet_cmd_checksrc       = CHECK   $<
@@ -487,12 +482,50 @@  targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \
 	   $(call intermediate_targets, .lex.o, .lex.c) \
 	   $(call intermediate_targets, .tab.o, .tab.c .tab.h)
 
+# Build
+# ---------------------------------------------------------------------------
+
+ifdef single-build
+
+curdir-single := $(sort $(foreach x, $(KBUILD_SINGLE_TARGETS), \
+			$(if $(filter $(x) $(basename $(x)).o, $(targets)), $(x))))
+
+# Handle single targets without any rule: show "Nothing to be done for ..." or
+# "No rule to make target ..." depending on whether the target exists.
+unknown-single := $(filter-out $(addsuffix /%, $(subdir-ym)), \
+			$(filter $(obj)/%, \
+				$(filter-out $(curdir-single), \
+					$(KBUILD_SINGLE_TARGETS))))
+
+__build: $(curdir-single) $(subdir-ym)
+ifneq ($(unknown-single),)
+	$(Q)$(MAKE) -f /dev/null $(unknown-single)
+endif
+	@:
+
+ifeq ($(curdir-single),)
+# Nothing to do in this directory. Do not include any .*.cmd file for speed-up
+targets :=
+else
+targets += $(curdir-single)
+endif
+
+else
+
+__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
+	 $(if $(KBUILD_MODULES),$(obj-m) $(mod-targets) $(modorder-target)) \
+	 $(subdir-ym) $(always)
+	@:
+
+endif
+
 # Descending
 # ---------------------------------------------------------------------------
 
 PHONY += $(subdir-ym)
 $(subdir-ym):
 	$(Q)$(MAKE) $(build)=$@ \
+	$(if $(filter $@/, $(KBUILD_SINGLE_TARGETS)),single-build=) \
 	need-builtin=$(if $(filter $@/built-in.a, $(subdir-obj-y)),1) \
 	need-modorder=$(if $(need-modorder),$(if $(filter $@/modules.order, $(modorder)),1))