| Message ID | 20200324084821.29944-2-masahiroy@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | x86, crypto: remove always-defined CONFIG_AS_* and cosolidate Kconfig/Makefiles | expand |
On Tue, Mar 24, 2020 at 1:49 AM Masahiro Yamada <masahiroy@kernel.org> wrote: > > You can test raid6 library code from user-space, like this: > > $ cd lib/raid6/test > $ make > > The command in $(shell ...) function is evaluated by /bin/sh by default. > (or, you can change the default shell by setting 'SHELL' in Makefile) > > Currently '>&/dev/null' is used to sink both stdout and stderr. Because > this code is bash-ism, it only works when /bin/sh is a symbolic link to > bash (this is the case on RHEL etc.) > > This does not work on Ubuntu where /bin/sh is a symbolic link to dash. > > I see lots of > > /bin/sh: 1: Syntax error: Bad fd number > > and > > warning "your version of binutils lacks ... support" > > Replace it with portable '>/dev/null 2>&1'. > > Fixes: 4f8c55c5ad49 ("lib/raid6: build proper files on corresponding arch") > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> > Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com> > --- > > lib/raid6/test/Makefile | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/lib/raid6/test/Makefile b/lib/raid6/test/Makefile > index 3ab8720aa2f8..b9e6c3648be1 100644 > --- a/lib/raid6/test/Makefile > +++ b/lib/raid6/test/Makefile > @@ -35,13 +35,13 @@ endif > ifeq ($(IS_X86),yes) > OBJS += mmx.o sse1.o sse2.o avx2.o recov_ssse3.o recov_avx2.o avx512.o recov_avx512.o > CFLAGS += $(shell echo "pshufb %xmm0, %xmm0" | \ > - gcc -c -x assembler - >&/dev/null && \ > + gcc -c -x assembler - >/dev/null 2>&1 && \ > rm ./-.o && echo -DCONFIG_AS_SSSE3=1) > CFLAGS += $(shell echo "vpbroadcastb %xmm0, %ymm1" | \ > - gcc -c -x assembler - >&/dev/null && \ > + gcc -c -x assembler - >/dev/null 2>&1 && \ > rm ./-.o && echo -DCONFIG_AS_AVX2=1) > CFLAGS += $(shell echo "vpmovm2b %k1, %zmm5" | \ > - gcc -c -x assembler - >&/dev/null && \ > + gcc -c -x assembler - >/dev/null 2>&1 && \ These should all use $(CC) rather than hardcode gcc. > rm ./-.o && echo -DCONFIG_AS_AVX512=1) > else ifeq ($(HAS_NEON),yes) > OBJS += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o > -- > 2.17.1 > > -- > You received this message because you are subscribed to the Google Groups "Clang Built Linux" group. > To unsubscribe from this group and stop receiving emails from it, send an email to clang-built-linux+unsubscribe@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/msgid/clang-built-linux/20200324084821.29944-2-masahiroy%40kernel.org.
On Wed, Mar 25, 2020 at 1:36 AM Nick Desaulniers <ndesaulniers@google.com> wrote: > > On Tue, Mar 24, 2020 at 1:49 AM Masahiro Yamada <masahiroy@kernel.org> wrote: > > > > You can test raid6 library code from user-space, like this: > > > > $ cd lib/raid6/test > > $ make > > > > The command in $(shell ...) function is evaluated by /bin/sh by default. > > (or, you can change the default shell by setting 'SHELL' in Makefile) > > > > Currently '>&/dev/null' is used to sink both stdout and stderr. Because > > this code is bash-ism, it only works when /bin/sh is a symbolic link to > > bash (this is the case on RHEL etc.) > > > > This does not work on Ubuntu where /bin/sh is a symbolic link to dash. > > > > I see lots of > > > > /bin/sh: 1: Syntax error: Bad fd number > > > > and > > > > warning "your version of binutils lacks ... support" > > > > Replace it with portable '>/dev/null 2>&1'. > > > > Fixes: 4f8c55c5ad49 ("lib/raid6: build proper files on corresponding arch") > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> > > Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com> > > --- > > > > lib/raid6/test/Makefile | 6 +++--- > > 1 file changed, 3 insertions(+), 3 deletions(-) > > > > diff --git a/lib/raid6/test/Makefile b/lib/raid6/test/Makefile > > index 3ab8720aa2f8..b9e6c3648be1 100644 > > --- a/lib/raid6/test/Makefile > > +++ b/lib/raid6/test/Makefile > > @@ -35,13 +35,13 @@ endif > > ifeq ($(IS_X86),yes) > > OBJS += mmx.o sse1.o sse2.o avx2.o recov_ssse3.o recov_avx2.o avx512.o recov_avx512.o > > CFLAGS += $(shell echo "pshufb %xmm0, %xmm0" | \ > > - gcc -c -x assembler - >&/dev/null && \ > > + gcc -c -x assembler - >/dev/null 2>&1 && \ > > rm ./-.o && echo -DCONFIG_AS_SSSE3=1) > > CFLAGS += $(shell echo "vpbroadcastb %xmm0, %ymm1" | \ > > - gcc -c -x assembler - >&/dev/null && \ > > + gcc -c -x assembler - >/dev/null 2>&1 && \ > > rm ./-.o && echo -DCONFIG_AS_AVX2=1) > > CFLAGS += $(shell echo "vpmovm2b %k1, %zmm5" | \ > > - gcc -c -x assembler - >&/dev/null && \ > > + gcc -c -x assembler - >/dev/null 2>&1 && \ > > These should all use $(CC) rather than hardcode gcc. Right, I had noticed this. We often fall between "let's fix this too while we are here" vs "do not do multiple things in a single patch" If we replace gcc -> $(CC), we also need to touch line 51 for consistency: gcc -c -x c - >/dev/null && rm ./-.o && echo yes) ..., which is not our main interest now. So, I leave it to a follow-up patch if somebody has interest in it.
On Wed, Mar 25, 2020 at 11:49 PM Masahiro Yamada <masahiroy@kernel.org> wrote: > > On Wed, Mar 25, 2020 at 1:36 AM Nick Desaulniers > <ndesaulniers@google.com> wrote: > > > > On Tue, Mar 24, 2020 at 1:49 AM Masahiro Yamada <masahiroy@kernel.org> wrote: > > > > > > You can test raid6 library code from user-space, like this: > > > > > > $ cd lib/raid6/test > > > $ make > > > > > > The command in $(shell ...) function is evaluated by /bin/sh by default. > > > (or, you can change the default shell by setting 'SHELL' in Makefile) > > > > > > Currently '>&/dev/null' is used to sink both stdout and stderr. Because > > > this code is bash-ism, it only works when /bin/sh is a symbolic link to > > > bash (this is the case on RHEL etc.) > > > > > > This does not work on Ubuntu where /bin/sh is a symbolic link to dash. > > > > > > I see lots of > > > > > > /bin/sh: 1: Syntax error: Bad fd number > > > > > > and > > > > > > warning "your version of binutils lacks ... support" > > > > > > Replace it with portable '>/dev/null 2>&1'. > > > > > > Fixes: 4f8c55c5ad49 ("lib/raid6: build proper files on corresponding arch") > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> > > > Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com> > > > --- > > > > > > lib/raid6/test/Makefile | 6 +++--- > > > 1 file changed, 3 insertions(+), 3 deletions(-) > > > > > > diff --git a/lib/raid6/test/Makefile b/lib/raid6/test/Makefile > > > index 3ab8720aa2f8..b9e6c3648be1 100644 > > > --- a/lib/raid6/test/Makefile > > > +++ b/lib/raid6/test/Makefile > > > @@ -35,13 +35,13 @@ endif > > > ifeq ($(IS_X86),yes) > > > OBJS += mmx.o sse1.o sse2.o avx2.o recov_ssse3.o recov_avx2.o avx512.o recov_avx512.o > > > CFLAGS += $(shell echo "pshufb %xmm0, %xmm0" | \ > > > - gcc -c -x assembler - >&/dev/null && \ > > > + gcc -c -x assembler - >/dev/null 2>&1 && \ > > > rm ./-.o && echo -DCONFIG_AS_SSSE3=1) > > > CFLAGS += $(shell echo "vpbroadcastb %xmm0, %ymm1" | \ > > > - gcc -c -x assembler - >&/dev/null && \ > > > + gcc -c -x assembler - >/dev/null 2>&1 && \ > > > rm ./-.o && echo -DCONFIG_AS_AVX2=1) > > > CFLAGS += $(shell echo "vpmovm2b %k1, %zmm5" | \ > > > - gcc -c -x assembler - >&/dev/null && \ > > > + gcc -c -x assembler - >/dev/null 2>&1 && \ > > > > These should all use $(CC) rather than hardcode gcc. > > > Right, I had noticed this. > > We often fall between > "let's fix this too while we are here" > vs > "do not do multiple things in a single patch" > > > If we replace gcc -> $(CC), > we also need to touch line 51 for consistency: > > gcc -c -x c - >/dev/null && rm ./-.o && echo yes) > > ..., which is not our main interest now. > > So, I leave it to a follow-up patch > if somebody has interest in it. Haha, ok, no worries. Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
diff --git a/lib/raid6/test/Makefile b/lib/raid6/test/Makefile index 3ab8720aa2f8..b9e6c3648be1 100644 --- a/lib/raid6/test/Makefile +++ b/lib/raid6/test/Makefile @@ -35,13 +35,13 @@ endif ifeq ($(IS_X86),yes) OBJS += mmx.o sse1.o sse2.o avx2.o recov_ssse3.o recov_avx2.o avx512.o recov_avx512.o CFLAGS += $(shell echo "pshufb %xmm0, %xmm0" | \ - gcc -c -x assembler - >&/dev/null && \ + gcc -c -x assembler - >/dev/null 2>&1 && \ rm ./-.o && echo -DCONFIG_AS_SSSE3=1) CFLAGS += $(shell echo "vpbroadcastb %xmm0, %ymm1" | \ - gcc -c -x assembler - >&/dev/null && \ + gcc -c -x assembler - >/dev/null 2>&1 && \ rm ./-.o && echo -DCONFIG_AS_AVX2=1) CFLAGS += $(shell echo "vpmovm2b %k1, %zmm5" | \ - gcc -c -x assembler - >&/dev/null && \ + gcc -c -x assembler - >/dev/null 2>&1 && \ rm ./-.o && echo -DCONFIG_AS_AVX512=1) else ifeq ($(HAS_NEON),yes) OBJS += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o
You can test raid6 library code from user-space, like this: $ cd lib/raid6/test $ make The command in $(shell ...) function is evaluated by /bin/sh by default. (or, you can change the default shell by setting 'SHELL' in Makefile) Currently '>&/dev/null' is used to sink both stdout and stderr. Because this code is bash-ism, it only works when /bin/sh is a symbolic link to bash (this is the case on RHEL etc.) This does not work on Ubuntu where /bin/sh is a symbolic link to dash. I see lots of /bin/sh: 1: Syntax error: Bad fd number and warning "your version of binutils lacks ... support" Replace it with portable '>/dev/null 2>&1'. Fixes: 4f8c55c5ad49 ("lib/raid6: build proper files on corresponding arch") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com> --- lib/raid6/test/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)