Message ID | 20220528154704.2576290-4-masahiroy@kernel.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [1/4] kbuild: remove redundant cleanups in scripts/link-vmlinux.sh | expand |
On Sat, May 28, 2022 at 9:45 PM Masahiro Yamada <masahiroy@kernel.org> wrote: > > scripts/Makefile.build and scripts/link-vmlinux.sh have similar setups > for the objtool arguments. > > It is difficult to factor out them because the vmlinux build rule is > written in a shell script. It is somewhat tedious to touch the two > files every time a new objtool option is supported. > > To reduce the code duplication, implement everything about objtool in > Makefile. > > Move the objtool for vmlinux.o into scripts/Makefile.vmlinux_o. > > Move the common macros to Makefile.lib so they are shared by > Makefile.build and Makefile.vmlinux_o. > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> With some comments (see below). Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64) -Sedat- > --- > > scripts/Makefile.build | 26 -------------- > scripts/Makefile.lib | 26 ++++++++++++++ > scripts/Makefile.vmlinux_o | 26 ++++++++++++++ > scripts/link-vmlinux.sh | 71 -------------------------------------- > 4 files changed, 52 insertions(+), 97 deletions(-) > > diff --git a/scripts/Makefile.build b/scripts/Makefile.build > index 4cb7145071b9..1f01ac65c0cd 100644 > --- a/scripts/Makefile.build > +++ b/scripts/Makefile.build > @@ -210,38 +210,12 @@ cmd_record_mcount = $(if $(findstring $(strip $(CC_FLAGS_FTRACE)),$(_c_flags)), > $(sub_cmd_record_mcount)) > endif # CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT > > -ifdef CONFIG_OBJTOOL > - > -objtool := $(objtree)/tools/objtool/objtool > - > -objtool_args = \ > - $(if $(CONFIG_HAVE_JUMP_LABEL_HACK), --hacks=jump_label) \ > - $(if $(CONFIG_HAVE_NOINSTR_HACK), --hacks=noinstr) \ > - $(if $(CONFIG_X86_KERNEL_IBT), --ibt) \ > - $(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount) \ > - $(if $(CONFIG_UNWINDER_ORC), --orc) \ > - $(if $(CONFIG_RETPOLINE), --retpoline) \ > - $(if $(CONFIG_SLS), --sls) \ > - $(if $(CONFIG_STACK_VALIDATION), --stackval) \ > - $(if $(CONFIG_HAVE_STATIC_CALL_INLINE), --static-call) \ > - --uaccess \ > - $(if $(delay-objtool), --link) \ > - $(if $(part-of-module), --module) \ > - $(if $(CONFIG_GCOV_KERNEL), --no-unreachable) > - > -cmd_objtool = $(if $(objtool-enabled), ; $(objtool) $(objtool_args) $@) > -cmd_gen_objtooldep = $(if $(objtool-enabled), { echo ; echo '$@: $$(wildcard $(objtool))' ; } >> $(dot-target).cmd) > - > -endif # CONFIG_OBJTOOL > - > # 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory > # 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file > # 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file > ^^ What is with this block? If this belongs together with objtool - shall this be moved, too? > is-standard-object = $(if $(filter-out y%, $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n),y) > > -delay-objtool := $(or $(CONFIG_LTO_CLANG),$(CONFIG_X86_KERNEL_IBT)) > - > $(obj)/%.o: objtool-enabled = $(if $(is-standard-object),$(if $(delay-objtool),$(is-single-obj-m),y)) > > ifdef CONFIG_TRIM_UNUSED_KSYMS > diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib > index f75138385449..f691fb231ce5 100644 > --- a/scripts/Makefile.lib > +++ b/scripts/Makefile.lib > @@ -225,6 +225,32 @@ dtc_cpp_flags = -Wp,-MMD,$(depfile).pre.tmp -nostdinc \ > $(addprefix -I,$(DTC_INCLUDE)) \ > -undef -D__DTS__ > > +ifdef CONFIG_OBJTOOL > + > +objtool := $(objtree)/tools/objtool/objtool > + > +objtool_args = \ > + $(if $(CONFIG_HAVE_JUMP_LABEL_HACK), --hacks=jump_label) \ > + $(if $(CONFIG_HAVE_NOINSTR_HACK), --hacks=noinstr) \ > + $(if $(CONFIG_X86_KERNEL_IBT), --ibt) \ > + $(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount) \ > + $(if $(CONFIG_UNWINDER_ORC), --orc) \ > + $(if $(CONFIG_RETPOLINE), --retpoline) \ > + $(if $(CONFIG_SLS), --sls) \ > + $(if $(CONFIG_STACK_VALIDATION), --stackval) \ > + $(if $(CONFIG_HAVE_STATIC_CALL_INLINE), --static-call) \ > + --uaccess \ > + $(if $(delay-objtool), --link) \ > + $(if $(part-of-module), --module) \ > + $(if $(CONFIG_GCOV_KERNEL), --no-unreachable) > + > +delay-objtool := $(or $(CONFIG_LTO_CLANG),$(CONFIG_X86_KERNEL_IBT)) > + > +cmd_objtool = $(if $(objtool-enabled), ; $(objtool) $(objtool_args) $@) > +cmd_gen_objtooldep = $(if $(objtool-enabled), { echo ; echo '$@: $$(wildcard $(objtool))' ; } >> $(dot-target).cmd) > + > +endif # CONFIG_OBJTOOL > + > # Useful for describing the dependency of composite objects > # Usage: > # $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add) > diff --git a/scripts/Makefile.vmlinux_o b/scripts/Makefile.vmlinux_o > index a9b375ca86d5..3c97a1564947 100644 > --- a/scripts/Makefile.vmlinux_o > +++ b/scripts/Makefile.vmlinux_o > @@ -6,6 +6,9 @@ __default: vmlinux.o > include include/config/auto.conf > include $(srctree)/scripts/Kbuild.include > > +# for objtool > +include $(srctree)/scripts/Makefile.lib > + > # Generate a linker script to ensure correct ordering of initcalls for Clang LTO > # --------------------------------------------------------------------------- > > @@ -24,6 +27,27 @@ ifdef CONFIG_LTO_CLANG > initcalls-lds := .tmp_initcalls.lds > endif > > +# objtool for vmlinux.o > +# --------------------------------------------------------------------------- > +# > +# For LTO and IBT, objtool doesn't run on individual translation units. > +# Run everything on vmlinux instead. > + > +objtool-enabled := $(or $(delay-objtool),$(CONFIG_NOINSTR_VALIDATION)) > + > +# Reuse objtool_args defined in scripts/Makefile.lib if LTO or IBT is enabled. > +# > +# Add some more flags as needed. > +# --no-unreachable and --link might be added twice, but it is fine. > +# > +# Expand objtool_args to a simple variable to avoid circular reference. > + > +objtool_args := \ > + $(if $(delay-objtool),$(objtool_args)) \ > + $(if $(CONFIG_NOINSTR_VALIDATION), --noinstr) \ > + $(if $(CONFIG_GCOV_KERNEL), --no-unreachable) \ > + --link > + > # Link of vmlinux.o used for section mismatch analysis > # --------------------------------------------------------------------------- > > @@ -33,9 +57,11 @@ quiet_cmd_ld_vmlinux.o = LD $@ > $(addprefix -T , $(initcalls-lds)) \ > --whole-archive $(KBUILD_VMLINUX_OBJS) --no-whole-archive \ > --start-group $(KBUILD_VMLINUX_LIBS) --end-group \ > + $(cmd_objtool) > > define rule_ld_vmlinux.o > $(call cmd_and_savecmd,ld_vmlinux.o) > + $(call cmd,gen_objtooldep) > endef > > vmlinux.o: $(initcalls-lds) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS) FORCE > diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh > index 90680b6bd710..1ac4e180fa3f 100755 > --- a/scripts/link-vmlinux.sh > +++ b/scripts/link-vmlinux.sh > @@ -45,76 +45,6 @@ info() > printf " %-7s %s\n" "${1}" "${2}" > } > > -objtool_link() > -{ > - local objtoolcmd; > - local objtoolopt; > - > - if ! is_enabled CONFIG_OBJTOOL; then > - return; > - fi > - > - if is_enabled CONFIG_LTO_CLANG || is_enabled CONFIG_X86_KERNEL_IBT; then > - > - # For LTO and IBT, objtool doesn't run on individual > - # translation units. Run everything on vmlinux instead. > - > - if is_enabled CONFIG_HAVE_JUMP_LABEL_HACK; then > - objtoolopt="${objtoolopt} --hacks=jump_label" > - fi > - > - if is_enabled CONFIG_HAVE_NOINSTR_HACK; then > - objtoolopt="${objtoolopt} --hacks=noinstr" > - fi > - > - if is_enabled CONFIG_X86_KERNEL_IBT; then > - objtoolopt="${objtoolopt} --ibt" > - fi > - > - if is_enabled CONFIG_FTRACE_MCOUNT_USE_OBJTOOL; then > - objtoolopt="${objtoolopt} --mcount" > - fi > - > - if is_enabled CONFIG_UNWINDER_ORC; then > - objtoolopt="${objtoolopt} --orc" > - fi > - > - if is_enabled CONFIG_RETPOLINE; then > - objtoolopt="${objtoolopt} --retpoline" > - fi > - > - if is_enabled CONFIG_SLS; then > - objtoolopt="${objtoolopt} --sls" > - fi > - > - if is_enabled CONFIG_STACK_VALIDATION; then > - objtoolopt="${objtoolopt} --stackval" > - fi > - > - if is_enabled CONFIG_HAVE_STATIC_CALL_INLINE; then > - objtoolopt="${objtoolopt} --static-call" > - fi > - > - objtoolopt="${objtoolopt} --uaccess" > - fi > - > - if is_enabled CONFIG_NOINSTR_VALIDATION; then > - objtoolopt="${objtoolopt} --noinstr" > - fi > - > - if [ -n "${objtoolopt}" ]; then > - > - if is_enabled CONFIG_GCOV_KERNEL; then > - objtoolopt="${objtoolopt} --no-unreachable" > - fi > - > - objtoolopt="${objtoolopt} --link" > - > - info OBJTOOL ${1} > - tools/objtool/objtool ${objtoolopt} ${1} > - fi > -} > - > # Link of vmlinux > # ${1} - output file > # ${2}, ${3}, ... - optional extra .o files > @@ -298,7 +228,6 @@ ${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init need-builtin=1 > > #link vmlinux.o ^^ While you are at it, change the comment to "# Link of vmlinux.o". > ${MAKE} -f "${srctree}/scripts/Makefile.vmlinux_o" > -objtool_link vmlinux.o > > # Generate the list of objects in vmlinux > for f in ${KBUILD_VMLINUX_OBJS} ${KBUILD_VMLINUX_LIBS}; do > -- > 2.32.0 >
On Sun, May 29, 2022 at 11:47 PM Sedat Dilek <sedat.dilek@gmail.com> wrote: > > On Sat, May 28, 2022 at 9:45 PM Masahiro Yamada <masahiroy@kernel.org> wrote: > > > > scripts/Makefile.build and scripts/link-vmlinux.sh have similar setups > > for the objtool arguments. > > > > It is difficult to factor out them because the vmlinux build rule is > > written in a shell script. It is somewhat tedious to touch the two > > files every time a new objtool option is supported. > > > > To reduce the code duplication, implement everything about objtool in > > Makefile. > > > > Move the objtool for vmlinux.o into scripts/Makefile.vmlinux_o. > > > > Move the common macros to Makefile.lib so they are shared by > > Makefile.build and Makefile.vmlinux_o. > > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> > > With some comments (see below). > > Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64) > > -Sedat- > > > --- > > > > scripts/Makefile.build | 26 -------------- > > scripts/Makefile.lib | 26 ++++++++++++++ > > scripts/Makefile.vmlinux_o | 26 ++++++++++++++ > > scripts/link-vmlinux.sh | 71 -------------------------------------- > > 4 files changed, 52 insertions(+), 97 deletions(-) > > > > diff --git a/scripts/Makefile.build b/scripts/Makefile.build > > index 4cb7145071b9..1f01ac65c0cd 100644 > > --- a/scripts/Makefile.build > > +++ b/scripts/Makefile.build > > @@ -210,38 +210,12 @@ cmd_record_mcount = $(if $(findstring $(strip $(CC_FLAGS_FTRACE)),$(_c_flags)), > > $(sub_cmd_record_mcount)) > > endif # CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT > > > > -ifdef CONFIG_OBJTOOL > > - > > -objtool := $(objtree)/tools/objtool/objtool > > - > > -objtool_args = \ > > - $(if $(CONFIG_HAVE_JUMP_LABEL_HACK), --hacks=jump_label) \ > > - $(if $(CONFIG_HAVE_NOINSTR_HACK), --hacks=noinstr) \ > > - $(if $(CONFIG_X86_KERNEL_IBT), --ibt) \ > > - $(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount) \ > > - $(if $(CONFIG_UNWINDER_ORC), --orc) \ > > - $(if $(CONFIG_RETPOLINE), --retpoline) \ > > - $(if $(CONFIG_SLS), --sls) \ > > - $(if $(CONFIG_STACK_VALIDATION), --stackval) \ > > - $(if $(CONFIG_HAVE_STATIC_CALL_INLINE), --static-call) \ > > - --uaccess \ > > - $(if $(delay-objtool), --link) \ > > - $(if $(part-of-module), --module) \ > > - $(if $(CONFIG_GCOV_KERNEL), --no-unreachable) > > - > > -cmd_objtool = $(if $(objtool-enabled), ; $(objtool) $(objtool_args) $@) > > -cmd_gen_objtooldep = $(if $(objtool-enabled), { echo ; echo '$@: $$(wildcard $(objtool))' ; } >> $(dot-target).cmd) > > - > > -endif # CONFIG_OBJTOOL > > - > > # 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory > > # 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file > > # 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file > > > > ^^ What is with this block? > If this belongs together with objtool - shall this be moved, too? No. These are unneeded for vmlinux.o > > - fi > > -} > > - > > # Link of vmlinux > > # ${1} - output file > > # ${2}, ${3}, ... - optional extra .o files > > @@ -298,7 +228,6 @@ ${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init need-builtin=1 > > > > #link vmlinux.o > > ^^ While you are at it, change the comment to "# Link of vmlinux.o". In my plan, this code will be gone sooner or later. It would be a noise.
On Sun, May 29, 2022 at 7:36 PM Masahiro Yamada <masahiroy@kernel.org> wrote: ... > > > # 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory > > > # 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file > > > # 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file > > > > > > > ^^ What is with this block? > > If this belongs together with objtool - shall this be moved, too? > > No. > These are unneeded for vmlinux.o > OK. > > > #link vmlinux.o > > > > ^^ While you are at it, change the comment to "# Link of vmlinux.o". > > > In my plan, this code will be gone sooner or later. > > It would be a noise. > Hope you have fruitful plans :-). -sed@-
diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 4cb7145071b9..1f01ac65c0cd 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -210,38 +210,12 @@ cmd_record_mcount = $(if $(findstring $(strip $(CC_FLAGS_FTRACE)),$(_c_flags)), $(sub_cmd_record_mcount)) endif # CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT -ifdef CONFIG_OBJTOOL - -objtool := $(objtree)/tools/objtool/objtool - -objtool_args = \ - $(if $(CONFIG_HAVE_JUMP_LABEL_HACK), --hacks=jump_label) \ - $(if $(CONFIG_HAVE_NOINSTR_HACK), --hacks=noinstr) \ - $(if $(CONFIG_X86_KERNEL_IBT), --ibt) \ - $(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount) \ - $(if $(CONFIG_UNWINDER_ORC), --orc) \ - $(if $(CONFIG_RETPOLINE), --retpoline) \ - $(if $(CONFIG_SLS), --sls) \ - $(if $(CONFIG_STACK_VALIDATION), --stackval) \ - $(if $(CONFIG_HAVE_STATIC_CALL_INLINE), --static-call) \ - --uaccess \ - $(if $(delay-objtool), --link) \ - $(if $(part-of-module), --module) \ - $(if $(CONFIG_GCOV_KERNEL), --no-unreachable) - -cmd_objtool = $(if $(objtool-enabled), ; $(objtool) $(objtool_args) $@) -cmd_gen_objtooldep = $(if $(objtool-enabled), { echo ; echo '$@: $$(wildcard $(objtool))' ; } >> $(dot-target).cmd) - -endif # CONFIG_OBJTOOL - # 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory # 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file # 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file is-standard-object = $(if $(filter-out y%, $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n),y) -delay-objtool := $(or $(CONFIG_LTO_CLANG),$(CONFIG_X86_KERNEL_IBT)) - $(obj)/%.o: objtool-enabled = $(if $(is-standard-object),$(if $(delay-objtool),$(is-single-obj-m),y)) ifdef CONFIG_TRIM_UNUSED_KSYMS diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index f75138385449..f691fb231ce5 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -225,6 +225,32 @@ dtc_cpp_flags = -Wp,-MMD,$(depfile).pre.tmp -nostdinc \ $(addprefix -I,$(DTC_INCLUDE)) \ -undef -D__DTS__ +ifdef CONFIG_OBJTOOL + +objtool := $(objtree)/tools/objtool/objtool + +objtool_args = \ + $(if $(CONFIG_HAVE_JUMP_LABEL_HACK), --hacks=jump_label) \ + $(if $(CONFIG_HAVE_NOINSTR_HACK), --hacks=noinstr) \ + $(if $(CONFIG_X86_KERNEL_IBT), --ibt) \ + $(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount) \ + $(if $(CONFIG_UNWINDER_ORC), --orc) \ + $(if $(CONFIG_RETPOLINE), --retpoline) \ + $(if $(CONFIG_SLS), --sls) \ + $(if $(CONFIG_STACK_VALIDATION), --stackval) \ + $(if $(CONFIG_HAVE_STATIC_CALL_INLINE), --static-call) \ + --uaccess \ + $(if $(delay-objtool), --link) \ + $(if $(part-of-module), --module) \ + $(if $(CONFIG_GCOV_KERNEL), --no-unreachable) + +delay-objtool := $(or $(CONFIG_LTO_CLANG),$(CONFIG_X86_KERNEL_IBT)) + +cmd_objtool = $(if $(objtool-enabled), ; $(objtool) $(objtool_args) $@) +cmd_gen_objtooldep = $(if $(objtool-enabled), { echo ; echo '$@: $$(wildcard $(objtool))' ; } >> $(dot-target).cmd) + +endif # CONFIG_OBJTOOL + # Useful for describing the dependency of composite objects # Usage: # $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add) diff --git a/scripts/Makefile.vmlinux_o b/scripts/Makefile.vmlinux_o index a9b375ca86d5..3c97a1564947 100644 --- a/scripts/Makefile.vmlinux_o +++ b/scripts/Makefile.vmlinux_o @@ -6,6 +6,9 @@ __default: vmlinux.o include include/config/auto.conf include $(srctree)/scripts/Kbuild.include +# for objtool +include $(srctree)/scripts/Makefile.lib + # Generate a linker script to ensure correct ordering of initcalls for Clang LTO # --------------------------------------------------------------------------- @@ -24,6 +27,27 @@ ifdef CONFIG_LTO_CLANG initcalls-lds := .tmp_initcalls.lds endif +# objtool for vmlinux.o +# --------------------------------------------------------------------------- +# +# For LTO and IBT, objtool doesn't run on individual translation units. +# Run everything on vmlinux instead. + +objtool-enabled := $(or $(delay-objtool),$(CONFIG_NOINSTR_VALIDATION)) + +# Reuse objtool_args defined in scripts/Makefile.lib if LTO or IBT is enabled. +# +# Add some more flags as needed. +# --no-unreachable and --link might be added twice, but it is fine. +# +# Expand objtool_args to a simple variable to avoid circular reference. + +objtool_args := \ + $(if $(delay-objtool),$(objtool_args)) \ + $(if $(CONFIG_NOINSTR_VALIDATION), --noinstr) \ + $(if $(CONFIG_GCOV_KERNEL), --no-unreachable) \ + --link + # Link of vmlinux.o used for section mismatch analysis # --------------------------------------------------------------------------- @@ -33,9 +57,11 @@ quiet_cmd_ld_vmlinux.o = LD $@ $(addprefix -T , $(initcalls-lds)) \ --whole-archive $(KBUILD_VMLINUX_OBJS) --no-whole-archive \ --start-group $(KBUILD_VMLINUX_LIBS) --end-group \ + $(cmd_objtool) define rule_ld_vmlinux.o $(call cmd_and_savecmd,ld_vmlinux.o) + $(call cmd,gen_objtooldep) endef vmlinux.o: $(initcalls-lds) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS) FORCE diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh index 90680b6bd710..1ac4e180fa3f 100755 --- a/scripts/link-vmlinux.sh +++ b/scripts/link-vmlinux.sh @@ -45,76 +45,6 @@ info() printf " %-7s %s\n" "${1}" "${2}" } -objtool_link() -{ - local objtoolcmd; - local objtoolopt; - - if ! is_enabled CONFIG_OBJTOOL; then - return; - fi - - if is_enabled CONFIG_LTO_CLANG || is_enabled CONFIG_X86_KERNEL_IBT; then - - # For LTO and IBT, objtool doesn't run on individual - # translation units. Run everything on vmlinux instead. - - if is_enabled CONFIG_HAVE_JUMP_LABEL_HACK; then - objtoolopt="${objtoolopt} --hacks=jump_label" - fi - - if is_enabled CONFIG_HAVE_NOINSTR_HACK; then - objtoolopt="${objtoolopt} --hacks=noinstr" - fi - - if is_enabled CONFIG_X86_KERNEL_IBT; then - objtoolopt="${objtoolopt} --ibt" - fi - - if is_enabled CONFIG_FTRACE_MCOUNT_USE_OBJTOOL; then - objtoolopt="${objtoolopt} --mcount" - fi - - if is_enabled CONFIG_UNWINDER_ORC; then - objtoolopt="${objtoolopt} --orc" - fi - - if is_enabled CONFIG_RETPOLINE; then - objtoolopt="${objtoolopt} --retpoline" - fi - - if is_enabled CONFIG_SLS; then - objtoolopt="${objtoolopt} --sls" - fi - - if is_enabled CONFIG_STACK_VALIDATION; then - objtoolopt="${objtoolopt} --stackval" - fi - - if is_enabled CONFIG_HAVE_STATIC_CALL_INLINE; then - objtoolopt="${objtoolopt} --static-call" - fi - - objtoolopt="${objtoolopt} --uaccess" - fi - - if is_enabled CONFIG_NOINSTR_VALIDATION; then - objtoolopt="${objtoolopt} --noinstr" - fi - - if [ -n "${objtoolopt}" ]; then - - if is_enabled CONFIG_GCOV_KERNEL; then - objtoolopt="${objtoolopt} --no-unreachable" - fi - - objtoolopt="${objtoolopt} --link" - - info OBJTOOL ${1} - tools/objtool/objtool ${objtoolopt} ${1} - fi -} - # Link of vmlinux # ${1} - output file # ${2}, ${3}, ... - optional extra .o files @@ -298,7 +228,6 @@ ${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init need-builtin=1 #link vmlinux.o ${MAKE} -f "${srctree}/scripts/Makefile.vmlinux_o" -objtool_link vmlinux.o # Generate the list of objects in vmlinux for f in ${KBUILD_VMLINUX_OBJS} ${KBUILD_VMLINUX_LIBS}; do
scripts/Makefile.build and scripts/link-vmlinux.sh have similar setups for the objtool arguments. It is difficult to factor out them because the vmlinux build rule is written in a shell script. It is somewhat tedious to touch the two files every time a new objtool option is supported. To reduce the code duplication, implement everything about objtool in Makefile. Move the objtool for vmlinux.o into scripts/Makefile.vmlinux_o. Move the common macros to Makefile.lib so they are shared by Makefile.build and Makefile.vmlinux_o. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> --- scripts/Makefile.build | 26 -------------- scripts/Makefile.lib | 26 ++++++++++++++ scripts/Makefile.vmlinux_o | 26 ++++++++++++++ scripts/link-vmlinux.sh | 71 -------------------------------------- 4 files changed, 52 insertions(+), 97 deletions(-)