From patchwork Tue Jan 17 09:59:45 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jani Nikula X-Patchwork-Id: 13104440 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id B3D57C67871 for ; Tue, 17 Jan 2023 10:00:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236233AbjAQKAb (ORCPT ); Tue, 17 Jan 2023 05:00:31 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49692 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235720AbjAQKA3 (ORCPT ); Tue, 17 Jan 2023 05:00:29 -0500 Received: from mga17.intel.com (mga17.intel.com [192.55.52.151]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2B67F2BEF1; Tue, 17 Jan 2023 02:00:25 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1673949625; x=1705485625; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=Bm8Dx4lvvWAtFk+QwEXMS/c9uC1xwwsEi3Z1lgXhCB8=; b=e55gWJ7iTLFzqmjY+eF1jfQ4ArOYdQUoGPE2p2fLUOf2g6G33p6j7SQb 8WcPUlb6ikETnkSRhTgnQnhxcI3HqatwSYbiDj4MYjkqTuKG2vvTQnqYz 0mA8M3nKQYE0QClnHj3pGJ7oTFDPym5H85QYbfeIsLQ4wwO6k0lrfT2Om Rjnf+KLmsurE1Ah4D8l/k2fjIqK2q7tG3w929MoTz9s5O3uVv8bFhxbmw hQGn/sEXOEf5jhb+u11dquYaAdr8vxhasuOGChzSAhnnTDZmXoouXTX1Z jjdpNCfdz4go30yB4f36RTCyi0jy0On9YARYbym8bZD9ejOzJJVYZaG4V w==; X-IronPort-AV: E=McAfee;i="6500,9779,10592"; a="305031026" X-IronPort-AV: E=Sophos;i="5.97,222,1669104000"; d="scan'208";a="305031026" Received: from orsmga003.jf.intel.com ([10.7.209.27]) by fmsmga107.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 17 Jan 2023 02:00:24 -0800 X-IronPort-AV: E=McAfee;i="6500,9779,10592"; a="609197054" X-IronPort-AV: E=Sophos;i="5.97,222,1669104000"; d="scan'208";a="609197054" Received: from dmcmanus.ger.corp.intel.com (HELO localhost) ([10.252.27.166]) by orsmga003-auth.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 17 Jan 2023 02:00:21 -0800 From: Jani Nikula To: linux-kbuild@vger.kernel.org, linux-doc@vger.kernel.org, Masahiro Yamada , Jonathan Corbet Cc: jani.nikula@intel.com Subject: [PATCH 5/6] docs/kbuild/makefiles: clean up indentation and whitespace Date: Tue, 17 Jan 2023 11:59:45 +0200 Message-Id: <20230117095946.2042832-6-jani.nikula@intel.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230117095946.2042832-1-jani.nikula@intel.com> References: <20230117095946.2042832-1-jani.nikula@intel.com> MIME-Version: 1.0 Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo Precedence: bulk List-ID: X-Mailing-List: linux-kbuild@vger.kernel.org Remove the leading whitespaces, and clean up indentation and whitespace in general. Although the diff looks massive, it's trivial with 'diff -w' or 'git show -w'. Cc: Masahiro Yamada Signed-off-by: Jani Nikula --- Documentation/kbuild/makefiles.rst | 1885 ++++++++++++++-------------- 1 file changed, 958 insertions(+), 927 deletions(-) diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst index 0180a49fefbf..6a1ff67eed34 100644 --- a/Documentation/kbuild/makefiles.rst +++ b/Documentation/kbuild/makefiles.rst @@ -22,6 +22,7 @@ The top Makefile is responsible for building two major products: vmlinux (the resident kernel image) and modules (any module files). It builds these goals by recursively descending into the subdirectories of the kernel source tree. + The list of subdirectories which are visited depends upon the kernel configuration. The top Makefile textually includes an arch Makefile with the name arch/$(SRCARCH)/Makefile. The arch Makefile supplies @@ -35,7 +36,6 @@ any built-in or modular targets. scripts/Makefile.* contains all the definitions/rules etc. that are used to build the kernel based on the kbuild makefiles. - Who does what ============= @@ -68,6 +68,7 @@ The kbuild files Most Makefiles within the kernel are kbuild Makefiles that use the kbuild infrastructure. This chapter introduces the syntax used in the kbuild makefiles. + The preferred name for the kbuild files are 'Makefile' but 'Kbuild' can be used and if both a 'Makefile' and a 'Kbuild' file exists, then the 'Kbuild' file will be used. @@ -78,618 +79,624 @@ more details, with real examples. Goal definitions ---------------- - Goal definitions are the main part (heart) of the kbuild Makefile. - These lines define the files to be built, any special compilation - options, and any subdirectories to be entered recursively. +Goal definitions are the main part (heart) of the kbuild Makefile. +These lines define the files to be built, any special compilation +options, and any subdirectories to be entered recursively. - The most simple kbuild makefile contains one line: +The most simple kbuild makefile contains one line: - Example:: +Example:: - obj-y += foo.o + obj-y += foo.o - This tells kbuild that there is one object in that directory, named - foo.o. foo.o will be built from foo.c or foo.S. +This tells kbuild that there is one object in that directory, named +foo.o. foo.o will be built from foo.c or foo.S. - If foo.o shall be built as a module, the variable obj-m is used. - Therefore the following pattern is often used: +If foo.o shall be built as a module, the variable obj-m is used. +Therefore the following pattern is often used: - Example:: +Example:: - obj-$(CONFIG_FOO) += foo.o + obj-$(CONFIG_FOO) += foo.o - $(CONFIG_FOO) evaluates to either y (for built-in) or m (for module). - If CONFIG_FOO is neither y nor m, then the file will not be compiled - nor linked. +$(CONFIG_FOO) evaluates to either y (for built-in) or m (for module). +If CONFIG_FOO is neither y nor m, then the file will not be compiled +nor linked. Built-in object goals - obj-y ----------------------------- - The kbuild Makefile specifies object files for vmlinux - in the $(obj-y) lists. These lists depend on the kernel - configuration. +The kbuild Makefile specifies object files for vmlinux +in the $(obj-y) lists. These lists depend on the kernel +configuration. - Kbuild compiles all the $(obj-y) files. It then calls - "$(AR) rcSTP" to merge these files into one built-in.a file. - This is a thin archive without a symbol table. It will be later - linked into vmlinux by scripts/link-vmlinux.sh +Kbuild compiles all the $(obj-y) files. It then calls +"$(AR) rcSTP" to merge these files into one built-in.a file. +This is a thin archive without a symbol table. It will be later +linked into vmlinux by scripts/link-vmlinux.sh - The order of files in $(obj-y) is significant. Duplicates in - the lists are allowed: the first instance will be linked into - built-in.a and succeeding instances will be ignored. +The order of files in $(obj-y) is significant. Duplicates in +the lists are allowed: the first instance will be linked into +built-in.a and succeeding instances will be ignored. - Link order is significant, because certain functions - (module_init() / __initcall) will be called during boot in the - order they appear. So keep in mind that changing the link - order may e.g. change the order in which your SCSI - controllers are detected, and thus your disks are renumbered. +Link order is significant, because certain functions +(module_init() / __initcall) will be called during boot in the +order they appear. So keep in mind that changing the link +order may e.g. change the order in which your SCSI +controllers are detected, and thus your disks are renumbered. - Example:: +Example:: - #drivers/isdn/i4l/Makefile - # Makefile for the kernel ISDN subsystem and device drivers. - # Each configuration option enables a list of files. - obj-$(CONFIG_ISDN_I4L) += isdn.o - obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o + #drivers/isdn/i4l/Makefile + # Makefile for the kernel ISDN subsystem and device drivers. + # Each configuration option enables a list of files. + obj-$(CONFIG_ISDN_I4L) += isdn.o + obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o Loadable module goals - obj-m ----------------------------- - $(obj-m) specifies object files which are built as loadable - kernel modules. +$(obj-m) specifies object files which are built as loadable +kernel modules. - A module may be built from one source file or several source - files. In the case of one source file, the kbuild makefile - simply adds the file to $(obj-m). +A module may be built from one source file or several source +files. In the case of one source file, the kbuild makefile +simply adds the file to $(obj-m). - Example:: +Example:: - #drivers/isdn/i4l/Makefile - obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o + #drivers/isdn/i4l/Makefile + obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o - Note: In this example $(CONFIG_ISDN_PPP_BSDCOMP) evaluates to 'm' +Note: In this example $(CONFIG_ISDN_PPP_BSDCOMP) evaluates to 'm' - If a kernel module is built from several source files, you specify - that you want to build a module in the same way as above; however, - kbuild needs to know which object files you want to build your - module from, so you have to tell it by setting a $(-y) - variable. +If a kernel module is built from several source files, you specify +that you want to build a module in the same way as above; however, +kbuild needs to know which object files you want to build your +module from, so you have to tell it by setting a $(-y) +variable. - Example:: +Example:: - #drivers/isdn/i4l/Makefile - obj-$(CONFIG_ISDN_I4L) += isdn.o - isdn-y := isdn_net_lib.o isdn_v110.o isdn_common.o + #drivers/isdn/i4l/Makefile + obj-$(CONFIG_ISDN_I4L) += isdn.o + isdn-y := isdn_net_lib.o isdn_v110.o isdn_common.o - In this example, the module name will be isdn.o. Kbuild will - compile the objects listed in $(isdn-y) and then run - "$(LD) -r" on the list of these files to generate isdn.o. +In this example, the module name will be isdn.o. Kbuild will +compile the objects listed in $(isdn-y) and then run +"$(LD) -r" on the list of these files to generate isdn.o. - Due to kbuild recognizing $(-y) for composite objects, - you can use the value of a `CONFIG_` symbol to optionally include an - object file as part of a composite object. +Due to kbuild recognizing $(-y) for composite objects, +you can use the value of a `CONFIG_` symbol to optionally include an +object file as part of a composite object. - Example:: +Example:: - #fs/ext2/Makefile - obj-$(CONFIG_EXT2_FS) += ext2.o - ext2-y := balloc.o dir.o file.o ialloc.o inode.o ioctl.o \ - namei.o super.o symlink.o - ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o xattr_user.o \ - xattr_trusted.o + #fs/ext2/Makefile + obj-$(CONFIG_EXT2_FS) += ext2.o + ext2-y := balloc.o dir.o file.o ialloc.o inode.o ioctl.o \ + namei.o super.o symlink.o + ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o xattr_user.o \ + xattr_trusted.o - In this example, xattr.o, xattr_user.o and xattr_trusted.o are only - part of the composite object ext2.o if $(CONFIG_EXT2_FS_XATTR) - evaluates to 'y'. +In this example, xattr.o, xattr_user.o and xattr_trusted.o are only +part of the composite object ext2.o if $(CONFIG_EXT2_FS_XATTR) +evaluates to 'y'. - Note: Of course, when you are building objects into the kernel, - the syntax above will also work. So, if you have CONFIG_EXT2_FS=y, - kbuild will build an ext2.o file for you out of the individual - parts and then link this into built-in.a, as you would expect. +Note: Of course, when you are building objects into the kernel, +the syntax above will also work. So, if you have CONFIG_EXT2_FS=y, +kbuild will build an ext2.o file for you out of the individual +parts and then link this into built-in.a, as you would expect. Library file goals - lib-y -------------------------- - Objects listed with obj-* are used for modules, or - combined in a built-in.a for that specific directory. - There is also the possibility to list objects that will - be included in a library, lib.a. - All objects listed with lib-y are combined in a single - library for that directory. - Objects that are listed in obj-y and additionally listed in - lib-y will not be included in the library, since they will - be accessible anyway. - For consistency, objects listed in lib-m will be included in lib.a. +Objects listed with obj-* are used for modules, or +combined in a built-in.a for that specific directory. +There is also the possibility to list objects that will +be included in a library, lib.a. +All objects listed with lib-y are combined in a single +library for that directory. +Objects that are listed in obj-y and additionally listed in +lib-y will not be included in the library, since they will +be accessible anyway. +For consistency, objects listed in lib-m will be included in lib.a. - Note that the same kbuild makefile may list files to be built-in - and to be part of a library. Therefore the same directory - may contain both a built-in.a and a lib.a file. +Note that the same kbuild makefile may list files to be built-in +and to be part of a library. Therefore the same directory +may contain both a built-in.a and a lib.a file. - Example:: +Example:: - #arch/x86/lib/Makefile - lib-y := delay.o + #arch/x86/lib/Makefile + lib-y := delay.o - This will create a library lib.a based on delay.o. For kbuild to - actually recognize that there is a lib.a being built, the directory - shall be listed in libs-y. +This will create a library lib.a based on delay.o. For kbuild to +actually recognize that there is a lib.a being built, the directory +shall be listed in libs-y. - See also `List directories to visit when descending`_. +See also `List directories to visit when descending`_. - Use of lib-y is normally restricted to `lib/` and `arch/*/lib`. +Use of lib-y is normally restricted to `lib/` and `arch/*/lib`. Descending down in directories ------------------------------ - A Makefile is only responsible for building objects in its own - directory. Files in subdirectories should be taken care of by - Makefiles in these subdirs. The build system will automatically - invoke make recursively in subdirectories, provided you let it know of - them. +A Makefile is only responsible for building objects in its own +directory. Files in subdirectories should be taken care of by +Makefiles in these subdirs. The build system will automatically +invoke make recursively in subdirectories, provided you let it know of +them. - To do so, obj-y and obj-m are used. - ext2 lives in a separate directory, and the Makefile present in fs/ - tells kbuild to descend down using the following assignment. +To do so, obj-y and obj-m are used. +ext2 lives in a separate directory, and the Makefile present in fs/ +tells kbuild to descend down using the following assignment. - Example:: +Example:: - #fs/Makefile - obj-$(CONFIG_EXT2_FS) += ext2/ + #fs/Makefile + obj-$(CONFIG_EXT2_FS) += ext2/ - If CONFIG_EXT2_FS is set to either 'y' (built-in) or 'm' (modular) - the corresponding obj- variable will be set, and kbuild will descend - down in the ext2 directory. +If CONFIG_EXT2_FS is set to either 'y' (built-in) or 'm' (modular) +the corresponding obj- variable will be set, and kbuild will descend +down in the ext2 directory. - Kbuild uses this information not only to decide that it needs to visit - the directory, but also to decide whether or not to link objects from - the directory into vmlinux. +Kbuild uses this information not only to decide that it needs to visit +the directory, but also to decide whether or not to link objects from +the directory into vmlinux. - When Kbuild descends into the directory with 'y', all built-in objects - from that directory are combined into the built-in.a, which will be - eventually linked into vmlinux. +When Kbuild descends into the directory with 'y', all built-in objects +from that directory are combined into the built-in.a, which will be +eventually linked into vmlinux. - When Kbuild descends into the directory with 'm', in contrast, nothing - from that directory will be linked into vmlinux. If the Makefile in - that directory specifies obj-y, those objects will be left orphan. - It is very likely a bug of the Makefile or of dependencies in Kconfig. +When Kbuild descends into the directory with 'm', in contrast, nothing +from that directory will be linked into vmlinux. If the Makefile in +that directory specifies obj-y, those objects will be left orphan. +It is very likely a bug of the Makefile or of dependencies in Kconfig. - Kbuild also supports dedicated syntax, subdir-y and subdir-m, for - descending into subdirectories. It is a good fit when you know they - do not contain kernel-space objects at all. A typical usage is to let - Kbuild descend into subdirectories to build tools. +Kbuild also supports dedicated syntax, subdir-y and subdir-m, for +descending into subdirectories. It is a good fit when you know they +do not contain kernel-space objects at all. A typical usage is to let +Kbuild descend into subdirectories to build tools. - Examples:: +Examples:: - # scripts/Makefile - subdir-$(CONFIG_GCC_PLUGINS) += gcc-plugins - subdir-$(CONFIG_MODVERSIONS) += genksyms - subdir-$(CONFIG_SECURITY_SELINUX) += selinux + # scripts/Makefile + subdir-$(CONFIG_GCC_PLUGINS) += gcc-plugins + subdir-$(CONFIG_MODVERSIONS) += genksyms + subdir-$(CONFIG_SECURITY_SELINUX) += selinux - Unlike obj-y/m, subdir-y/m does not need the trailing slash since this - syntax is always used for directories. +Unlike obj-y/m, subdir-y/m does not need the trailing slash since this +syntax is always used for directories. - It is good practice to use a `CONFIG_` variable when assigning directory - names. This allows kbuild to totally skip the directory if the - corresponding `CONFIG_` option is neither 'y' nor 'm'. +It is good practice to use a `CONFIG_` variable when assigning directory +names. This allows kbuild to totally skip the directory if the +corresponding `CONFIG_` option is neither 'y' nor 'm'. Non-builtin vmlinux targets - extra-y ------------------------------------- - extra-y specifies targets which are needed for building vmlinux, - but not combined into built-in.a. +extra-y specifies targets which are needed for building vmlinux, +but not combined into built-in.a. - Examples are: +Examples are: - 1) vmlinux linker script +1) vmlinux linker script - The linker script for vmlinux is located at - arch/$(SRCARCH)/kernel/vmlinux.lds + The linker script for vmlinux is located at + arch/$(SRCARCH)/kernel/vmlinux.lds - Example:: +Example:: - # arch/x86/kernel/Makefile - extra-y += vmlinux.lds + # arch/x86/kernel/Makefile + extra-y += vmlinux.lds - $(extra-y) should only contain targets needed for vmlinux. +$(extra-y) should only contain targets needed for vmlinux. - Kbuild skips extra-y when vmlinux is apparently not a final goal. - (e.g. 'make modules', or building external modules) +Kbuild skips extra-y when vmlinux is apparently not a final goal. +(e.g. 'make modules', or building external modules) - If you intend to build targets unconditionally, always-y (explained - in the next section) is the correct syntax to use. +If you intend to build targets unconditionally, always-y (explained +in the next section) is the correct syntax to use. Always built goals - always-y ----------------------------- - always-y specifies targets which are literally always built when - Kbuild visits the Makefile. +always-y specifies targets which are literally always built when +Kbuild visits the Makefile. + +Example:: - Example:: - # ./Kbuild - offsets-file := include/generated/asm-offsets.h - always-y += $(offsets-file) + # ./Kbuild + offsets-file := include/generated/asm-offsets.h + always-y += $(offsets-file) Compilation flags ----------------- - ccflags-y, asflags-y and ldflags-y - These three flags apply only to the kbuild makefile in which they - are assigned. They are used for all the normal cc, as and ld - invocations happening during a recursive build. - Note: Flags with the same behaviour were previously named: - EXTRA_CFLAGS, EXTRA_AFLAGS and EXTRA_LDFLAGS. - They are still supported but their usage is deprecated. +ccflags-y, asflags-y and ldflags-y + These three flags apply only to the kbuild makefile in which they + are assigned. They are used for all the normal cc, as and ld + invocations happening during a recursive build. + Note: Flags with the same behaviour were previously named: + EXTRA_CFLAGS, EXTRA_AFLAGS and EXTRA_LDFLAGS. + They are still supported but their usage is deprecated. - ccflags-y specifies options for compiling with $(CC). + ccflags-y specifies options for compiling with $(CC). - Example:: + Example:: - # drivers/acpi/acpica/Makefile - ccflags-y := -Os -D_LINUX -DBUILDING_ACPICA - ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT + # drivers/acpi/acpica/Makefile + ccflags-y := -Os -D_LINUX -DBUILDING_ACPICA + ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT - This variable is necessary because the top Makefile owns the - variable $(KBUILD_CFLAGS) and uses it for compilation flags for the - entire tree. + This variable is necessary because the top Makefile owns the + variable $(KBUILD_CFLAGS) and uses it for compilation flags for the + entire tree. - asflags-y specifies assembler options. + asflags-y specifies assembler options. - Example:: + Example:: - #arch/sparc/kernel/Makefile - asflags-y := -ansi + #arch/sparc/kernel/Makefile + asflags-y := -ansi - ldflags-y specifies options for linking with $(LD). + ldflags-y specifies options for linking with $(LD). - Example:: + Example:: - #arch/cris/boot/compressed/Makefile - ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds + #arch/cris/boot/compressed/Makefile + ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds - subdir-ccflags-y, subdir-asflags-y - The two flags listed above are similar to ccflags-y and asflags-y. - The difference is that the subdir- variants have effect for the kbuild - file where they are present and all subdirectories. - Options specified using subdir-* are added to the commandline before - the options specified using the non-subdir variants. +subdir-ccflags-y, subdir-asflags-y + The two flags listed above are similar to ccflags-y and asflags-y. + The difference is that the subdir- variants have effect for the kbuild + file where they are present and all subdirectories. + Options specified using subdir-* are added to the commandline before + the options specified using the non-subdir variants. - Example:: + Example:: - subdir-ccflags-y := -Werror + subdir-ccflags-y := -Werror - ccflags-remove-y, asflags-remove-y - These flags are used to remove particular flags for the compiler, - assembler invocations. +ccflags-remove-y, asflags-remove-y + These flags are used to remove particular flags for the compiler, + assembler invocations. - Example:: + Example:: - ccflags-remove-$(CONFIG_MCOUNT) += -pg + ccflags-remove-$(CONFIG_MCOUNT) += -pg - CFLAGS_$@, AFLAGS_$@ - CFLAGS_$@ and AFLAGS_$@ only apply to commands in current - kbuild makefile. +CFLAGS_$@, AFLAGS_$@ + CFLAGS_$@ and AFLAGS_$@ only apply to commands in current + kbuild makefile. - $(CFLAGS_$@) specifies per-file options for $(CC). The $@ - part has a literal value which specifies the file that it is for. + $(CFLAGS_$@) specifies per-file options for $(CC). The $@ + part has a literal value which specifies the file that it is for. - CFLAGS_$@ has the higher priority than ccflags-remove-y; CFLAGS_$@ - can re-add compiler flags that were removed by ccflags-remove-y. + CFLAGS_$@ has the higher priority than ccflags-remove-y; CFLAGS_$@ + can re-add compiler flags that were removed by ccflags-remove-y. - Example:: + Example:: - # drivers/scsi/Makefile - CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF + # drivers/scsi/Makefile + CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF - This line specify compilation flags for aha152x.o. + This line specify compilation flags for aha152x.o. - $(AFLAGS_$@) is a similar feature for source files in assembly - languages. + $(AFLAGS_$@) is a similar feature for source files in assembly + languages. - AFLAGS_$@ has the higher priority than asflags-remove-y; AFLAGS_$@ - can re-add assembler flags that were removed by asflags-remove-y. + AFLAGS_$@ has the higher priority than asflags-remove-y; AFLAGS_$@ + can re-add assembler flags that were removed by asflags-remove-y. - Example:: - - # arch/arm/kernel/Makefile - AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) - AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 - AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt + Example:: + # arch/arm/kernel/Makefile + AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) + AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 + AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt Dependency tracking ------------------- - Kbuild tracks dependencies on the following: +Kbuild tracks dependencies on the following: - 1) All prerequisite files (both `*.c` and `*.h`) - 2) `CONFIG_` options used in all prerequisite files - 3) Command-line used to compile target +1) All prerequisite files (both `*.c` and `*.h`) +2) `CONFIG_` options used in all prerequisite files +3) Command-line used to compile target - Thus, if you change an option to $(CC) all affected files will - be re-compiled. +Thus, if you change an option to $(CC) all affected files will +be re-compiled. Custom Rules ------------ - Custom rules are used when the kbuild infrastructure does - not provide the required support. A typical example is - header files generated during the build process. - Another example are the architecture-specific Makefiles which - need custom rules to prepare boot images etc. +Custom rules are used when the kbuild infrastructure does +not provide the required support. A typical example is +header files generated during the build process. +Another example are the architecture-specific Makefiles which +need custom rules to prepare boot images etc. - Custom rules are written as normal Make rules. - Kbuild is not executing in the directory where the Makefile is - located, so all custom rules shall use a relative - path to prerequisite files and target files. +Custom rules are written as normal Make rules. +Kbuild is not executing in the directory where the Makefile is +located, so all custom rules shall use a relative +path to prerequisite files and target files. - Two variables are used when defining custom rules: +Two variables are used when defining custom rules: - $(src) - $(src) is a relative path which points to the directory - where the Makefile is located. Always use $(src) when - referring to files located in the src tree. +$(src) + $(src) is a relative path which points to the directory + where the Makefile is located. Always use $(src) when + referring to files located in the src tree. - $(obj) - $(obj) is a relative path which points to the directory - where the target is saved. Always use $(obj) when - referring to generated files. +$(obj) + $(obj) is a relative path which points to the directory + where the target is saved. Always use $(obj) when + referring to generated files. - Example:: + Example:: - #drivers/scsi/Makefile - $(obj)/53c8xx_d.h: $(src)/53c7,8xx.scr $(src)/script_asm.pl - $(CPP) -DCHIP=810 - < $< | ... $(src)/script_asm.pl + #drivers/scsi/Makefile + $(obj)/53c8xx_d.h: $(src)/53c7,8xx.scr $(src)/script_asm.pl + $(CPP) -DCHIP=810 - < $< | ... $(src)/script_asm.pl - This is a custom rule, following the normal syntax - required by make. + This is a custom rule, following the normal syntax + required by make. - The target file depends on two prerequisite files. References - to the target file are prefixed with $(obj), references - to prerequisites are referenced with $(src) (because they are not - generated files). + The target file depends on two prerequisite files. References + to the target file are prefixed with $(obj), references + to prerequisites are referenced with $(src) (because they are not + generated files). - $(kecho) - echoing information to user in a rule is often a good practice - but when execution "make -s" one does not expect to see any output - except for warnings/errors. - To support this kbuild defines $(kecho) which will echo out the - text following $(kecho) to stdout except if "make -s" is used. +$(kecho) + echoing information to user in a rule is often a good practice + but when execution "make -s" one does not expect to see any output + except for warnings/errors. + To support this kbuild defines $(kecho) which will echo out the + text following $(kecho) to stdout except if "make -s" is used. - Example:: + Example:: - # arch/arm/Makefile - $(BOOT_TARGETS): vmlinux - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ - @$(kecho) ' Kernel: $(boot)/$@ is ready' + # arch/arm/Makefile + $(BOOT_TARGETS): vmlinux + $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + @$(kecho) ' Kernel: $(boot)/$@ is ready' - When kbuild is executing with KBUILD_VERBOSE unset, then only a shorthand - of a command is normally displayed. - To enable this behaviour for custom commands kbuild requires - two variables to be set:: + When kbuild is executing with KBUILD_VERBOSE unset, then only a shorthand + of a command is normally displayed. + To enable this behaviour for custom commands kbuild requires + two variables to be set:: - quiet_cmd_ - what shall be echoed - cmd_ - the command to execute + quiet_cmd_ - what shall be echoed + cmd_ - the command to execute - Example:: + Example:: - # lib/Makefile - quiet_cmd_crc32 = GEN $@ - cmd_crc32 = $< > $@ + # lib/Makefile + quiet_cmd_crc32 = GEN $@ + cmd_crc32 = $< > $@ - $(obj)/crc32table.h: $(obj)/gen_crc32table - $(call cmd,crc32) + $(obj)/crc32table.h: $(obj)/gen_crc32table + $(call cmd,crc32) - When updating the $(obj)/crc32table.h target, the line: + When updating the $(obj)/crc32table.h target, the line:: - GEN lib/crc32table.h + GEN lib/crc32table.h - will be displayed with "make KBUILD_VERBOSE=". + will be displayed with "make KBUILD_VERBOSE=". Command change detection ------------------------ - When the rule is evaluated, timestamps are compared between the target - and its prerequisite files. GNU Make updates the target when any of the - prerequisites is newer than that. +When the rule is evaluated, timestamps are compared between the target +and its prerequisite files. GNU Make updates the target when any of the +prerequisites is newer than that. - The target should be rebuilt also when the command line has changed - since the last invocation. This is not supported by Make itself, so - Kbuild achieves this by a kind of meta-programming. +The target should be rebuilt also when the command line has changed +since the last invocation. This is not supported by Make itself, so +Kbuild achieves this by a kind of meta-programming. - if_changed is the macro used for this purpose, in the following form:: +if_changed is the macro used for this purpose, in the following form:: - quiet_cmd_ = ... - cmd_ = ... + quiet_cmd_ = ... + cmd_ = ... - : FORCE - $(call if_changed,) + : FORCE + $(call if_changed,) - Any target that utilizes if_changed must be listed in $(targets), - otherwise the command line check will fail, and the target will - always be built. +Any target that utilizes if_changed must be listed in $(targets), +otherwise the command line check will fail, and the target will +always be built. - If the target is already listed in the recognized syntax such as - obj-y/m, lib-y/m, extra-y/m, always-y/m, hostprogs, userprogs, Kbuild - automatically adds it to $(targets). Otherwise, the target must be - explicitly added to $(targets). +If the target is already listed in the recognized syntax such as +obj-y/m, lib-y/m, extra-y/m, always-y/m, hostprogs, userprogs, Kbuild +automatically adds it to $(targets). Otherwise, the target must be +explicitly added to $(targets). - Assignments to $(targets) are without $(obj)/ prefix. if_changed may be - used in conjunction with custom rules as defined in `Custom Rules`_. +Assignments to $(targets) are without $(obj)/ prefix. if_changed may be +used in conjunction with custom rules as defined in `Custom Rules`_. - Note: It is a typical mistake to forget the FORCE prerequisite. - Another common pitfall is that whitespace is sometimes significant; for - instance, the below will fail (note the extra space after the comma):: +Note: It is a typical mistake to forget the FORCE prerequisite. +Another common pitfall is that whitespace is sometimes significant; for +instance, the below will fail (note the extra space after the comma):: - target: source(s) FORCE + target: source(s) FORCE - **WRONG!** $(call if_changed, objcopy) +**WRONG!** $(call if_changed, objcopy) - Note: - if_changed should not be used more than once per target. - It stores the executed command in a corresponding .cmd - file and multiple calls would result in overwrites and - unwanted results when the target is up to date and only the - tests on changed commands trigger execution of commands. +Note: + if_changed should not be used more than once per target. + It stores the executed command in a corresponding .cmd + file and multiple calls would result in overwrites and + unwanted results when the target is up to date and only the + tests on changed commands trigger execution of commands. $(CC) support functions ----------------------- - The kernel may be built with several different versions of - $(CC), each supporting a unique set of features and options. - kbuild provides basic support to check for valid options for $(CC). - $(CC) is usually the gcc compiler, but other alternatives are - available. +The kernel may be built with several different versions of +$(CC), each supporting a unique set of features and options. +kbuild provides basic support to check for valid options for $(CC). +$(CC) is usually the gcc compiler, but other alternatives are +available. + +as-option + as-option is used to check if $(CC) -- when used to compile + assembler (`*.S`) files -- supports the given option. An optional + second option may be specified if the first option is not supported. + + Example:: + + #arch/sh/Makefile + cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) - as-option - as-option is used to check if $(CC) -- when used to compile - assembler (`*.S`) files -- supports the given option. An optional - second option may be specified if the first option is not supported. + In the above example, cflags-y will be assigned the option + -Wa$(comma)-isa=$(isa-y) if it is supported by $(CC). + The second argument is optional, and if supplied will be used + if first argument is not supported. - Example:: +as-instr + as-instr checks if the assembler reports a specific instruction + and then outputs either option1 or option2 + C escapes are supported in the test instruction + Note: as-instr-option uses KBUILD_AFLAGS for assembler options - #arch/sh/Makefile - cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) +cc-option + cc-option is used to check if $(CC) supports a given option, and if + not supported to use an optional second option. - In the above example, cflags-y will be assigned the option - -Wa$(comma)-isa=$(isa-y) if it is supported by $(CC). - The second argument is optional, and if supplied will be used - if first argument is not supported. + Example:: - as-instr - as-instr checks if the assembler reports a specific instruction - and then outputs either option1 or option2 - C escapes are supported in the test instruction - Note: as-instr-option uses KBUILD_AFLAGS for assembler options + #arch/x86/Makefile + cflags-y += $(call cc-option,-march=pentium-mmx,-march=i586) - cc-option - cc-option is used to check if $(CC) supports a given option, and if - not supported to use an optional second option. + In the above example, cflags-y will be assigned the option + -march=pentium-mmx if supported by $(CC), otherwise -march=i586. + The second argument to cc-option is optional, and if omitted, + cflags-y will be assigned no value if first option is not supported. + Note: cc-option uses KBUILD_CFLAGS for $(CC) options - Example:: +cc-option-yn + cc-option-yn is used to check if gcc supports a given option + and return 'y' if supported, otherwise 'n'. - #arch/x86/Makefile - cflags-y += $(call cc-option,-march=pentium-mmx,-march=i586) + Example:: - In the above example, cflags-y will be assigned the option - -march=pentium-mmx if supported by $(CC), otherwise -march=i586. - The second argument to cc-option is optional, and if omitted, - cflags-y will be assigned no value if first option is not supported. - Note: cc-option uses KBUILD_CFLAGS for $(CC) options + #arch/ppc/Makefile + biarch := $(call cc-option-yn, -m32) + aflags-$(biarch) += -a32 + cflags-$(biarch) += -m32 - cc-option-yn - cc-option-yn is used to check if gcc supports a given option - and return 'y' if supported, otherwise 'n'. + In the above example, $(biarch) is set to y if $(CC) supports the -m32 + option. When $(biarch) equals 'y', the expanded variables $(aflags-y) + and $(cflags-y) will be assigned the values -a32 and -m32, + respectively. - Example:: + Note: cc-option-yn uses KBUILD_CFLAGS for $(CC) options - #arch/ppc/Makefile - biarch := $(call cc-option-yn, -m32) - aflags-$(biarch) += -a32 - cflags-$(biarch) += -m32 +cc-disable-warning + cc-disable-warning checks if gcc supports a given warning and returns + the commandline switch to disable it. This special function is needed, + because gcc 4.4 and later accept any unknown -Wno-* option and only + warn about it if there is another warning in the source file. - In the above example, $(biarch) is set to y if $(CC) supports the -m32 - option. When $(biarch) equals 'y', the expanded variables $(aflags-y) - and $(cflags-y) will be assigned the values -a32 and -m32, - respectively. - Note: cc-option-yn uses KBUILD_CFLAGS for $(CC) options + Example:: - cc-disable-warning - cc-disable-warning checks if gcc supports a given warning and returns - the commandline switch to disable it. This special function is needed, - because gcc 4.4 and later accept any unknown -Wno-* option and only - warn about it if there is another warning in the source file. + KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) - Example:: + In the above example, -Wno-unused-but-set-variable will be added to + KBUILD_CFLAGS only if gcc really accepts it. - KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) +gcc-min-version + gcc-min-version tests if the value of $(CONFIG_GCC_VERSION) is greater than + or equal to the provided value and evaluates to y if so. - In the above example, -Wno-unused-but-set-variable will be added to - KBUILD_CFLAGS only if gcc really accepts it. + Example:: - gcc-min-version - gcc-min-version tests if the value of $(CONFIG_GCC_VERSION) is greater than - or equal to the provided value and evaluates to y if so. + cflags-$(call gcc-min-version, 70100) := -foo - Example:: + In this example, cflags-y will be assigned the value -foo if $(CC) is gcc and + $(CONFIG_GCC_VERSION) is >= 7.1. - cflags-$(call gcc-min-version, 70100) := -foo +clang-min-version + clang-min-version tests if the value of $(CONFIG_CLANG_VERSION) is greater + than or equal to the provided value and evaluates to y if so. - In this example, cflags-y will be assigned the value -foo if $(CC) is gcc and - $(CONFIG_GCC_VERSION) is >= 7.1. + Example:: - clang-min-version - clang-min-version tests if the value of $(CONFIG_CLANG_VERSION) is greater - than or equal to the provided value and evaluates to y if so. + cflags-$(call clang-min-version, 110000) := -foo - Example:: + In this example, cflags-y will be assigned the value -foo if $(CC) is clang + and $(CONFIG_CLANG_VERSION) is >= 11.0.0. - cflags-$(call clang-min-version, 110000) := -foo +cc-cross-prefix + cc-cross-prefix is used to check if there exists a $(CC) in path with + one of the listed prefixes. The first prefix where there exist a + prefix$(CC) in the PATH is returned - and if no prefix$(CC) is found + then nothing is returned. - In this example, cflags-y will be assigned the value -foo if $(CC) is clang - and $(CONFIG_CLANG_VERSION) is >= 11.0.0. + Additional prefixes are separated by a single space in the + call of cc-cross-prefix. - cc-cross-prefix - cc-cross-prefix is used to check if there exists a $(CC) in path with - one of the listed prefixes. The first prefix where there exist a - prefix$(CC) in the PATH is returned - and if no prefix$(CC) is found - then nothing is returned. - Additional prefixes are separated by a single space in the - call of cc-cross-prefix. - This functionality is useful for architecture Makefiles that try - to set CROSS_COMPILE to well-known values but may have several - values to select between. - It is recommended only to try to set CROSS_COMPILE if it is a cross - build (host arch is different from target arch). And if CROSS_COMPILE - is already set then leave it with the old value. + This functionality is useful for architecture Makefiles that try + to set CROSS_COMPILE to well-known values but may have several + values to select between. - Example:: + It is recommended only to try to set CROSS_COMPILE if it is a cross + build (host arch is different from target arch). And if CROSS_COMPILE + is already set then leave it with the old value. - #arch/m68k/Makefile - ifneq ($(SUBARCH),$(ARCH)) - ifeq ($(CROSS_COMPILE),) - CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu-) - endif - endif + Example:: + + #arch/m68k/Makefile + ifneq ($(SUBARCH),$(ARCH)) + ifeq ($(CROSS_COMPILE),) + CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu-) + endif + endif $(LD) support functions ----------------------- - ld-option - ld-option is used to check if $(LD) supports the supplied option. - ld-option takes two options as arguments. - The second argument is an optional option that can be used if the - first option is not supported by $(LD). +ld-option + ld-option is used to check if $(LD) supports the supplied option. + ld-option takes two options as arguments. + + The second argument is an optional option that can be used if the + first option is not supported by $(LD). - Example:: + Example:: - #Makefile - LDFLAGS_vmlinux += $(call ld-option, -X) + #Makefile + LDFLAGS_vmlinux += $(call ld-option, -X) Script invocation ----------------- - Make rules may invoke scripts to build the kernel. The rules shall - always provide the appropriate interpreter to execute the script. They - shall not rely on the execute bits being set, and shall not invoke the - script directly. For the convenience of manual script invocation, such - as invoking ./scripts/checkpatch.pl, it is recommended to set execute - bits on the scripts nonetheless. +Make rules may invoke scripts to build the kernel. The rules shall +always provide the appropriate interpreter to execute the script. They +shall not rely on the execute bits being set, and shall not invoke the +script directly. For the convenience of manual script invocation, such +as invoking ./scripts/checkpatch.pl, it is recommended to set execute +bits on the scripts nonetheless. - Kbuild provides variables $(CONFIG_SHELL), $(AWK), $(PERL), - and $(PYTHON3) to refer to interpreters for the respective - scripts. +Kbuild provides variables $(CONFIG_SHELL), $(AWK), $(PERL), +and $(PYTHON3) to refer to interpreters for the respective +scripts. - Example:: +Example:: - #Makefile - cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \ - $(KERNELRELEASE) + #Makefile + cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \ + $(KERNELRELEASE) Host Program support ==================== Kbuild supports building executables on the host for use during the compilation stage. + Two steps are required in order to use a host executable. The first step is to tell kbuild that a host program exists. This is @@ -703,154 +710,157 @@ Both possibilities are described in the following. Simple Host Program ------------------- - In some cases there is a need to compile and run a program on the - computer where the build is running. - The following line tells kbuild that the program bin2hex shall be - built on the build host. +In some cases there is a need to compile and run a program on the +computer where the build is running. + +The following line tells kbuild that the program bin2hex shall be +built on the build host. - Example:: +Example:: - hostprogs := bin2hex + hostprogs := bin2hex - Kbuild assumes in the above example that bin2hex is made from a single - c-source file named bin2hex.c located in the same directory as - the Makefile. +Kbuild assumes in the above example that bin2hex is made from a single +c-source file named bin2hex.c located in the same directory as +the Makefile. Composite Host Programs ----------------------- - Host programs can be made up based on composite objects. - The syntax used to define composite objects for host programs is - similar to the syntax used for kernel objects. - $(-objs) lists all objects used to link the final - executable. +Host programs can be made up based on composite objects. +The syntax used to define composite objects for host programs is +similar to the syntax used for kernel objects. +$(-objs) lists all objects used to link the final +executable. - Example:: +Example:: - #scripts/lxdialog/Makefile - hostprogs := lxdialog - lxdialog-objs := checklist.o lxdialog.o + #scripts/lxdialog/Makefile + hostprogs := lxdialog + lxdialog-objs := checklist.o lxdialog.o - Objects with extension .o are compiled from the corresponding .c - files. In the above example, checklist.c is compiled to checklist.o - and lxdialog.c is compiled to lxdialog.o. +Objects with extension .o are compiled from the corresponding .c +files. In the above example, checklist.c is compiled to checklist.o +and lxdialog.c is compiled to lxdialog.o. - Finally, the two .o files are linked to the executable, lxdialog. - Note: The syntax -y is not permitted for host-programs. +Finally, the two .o files are linked to the executable, lxdialog. +Note: The syntax -y is not permitted for host-programs. Using C++ for host programs --------------------------- - kbuild offers support for host programs written in C++. This was - introduced solely to support kconfig, and is not recommended - for general use. +kbuild offers support for host programs written in C++. This was +introduced solely to support kconfig, and is not recommended +for general use. - Example:: +Example:: - #scripts/kconfig/Makefile - hostprogs := qconf - qconf-cxxobjs := qconf.o + #scripts/kconfig/Makefile + hostprogs := qconf + qconf-cxxobjs := qconf.o - In the example above the executable is composed of the C++ file - qconf.cc - identified by $(qconf-cxxobjs). +In the example above the executable is composed of the C++ file +qconf.cc - identified by $(qconf-cxxobjs). - If qconf is composed of a mixture of .c and .cc files, then an - additional line can be used to identify this. +If qconf is composed of a mixture of .c and .cc files, then an +additional line can be used to identify this. - Example:: +Example:: - #scripts/kconfig/Makefile - hostprogs := qconf - qconf-cxxobjs := qconf.o - qconf-objs := check.o + #scripts/kconfig/Makefile + hostprogs := qconf + qconf-cxxobjs := qconf.o + qconf-objs := check.o Using Rust for host programs ---------------------------- - Kbuild offers support for host programs written in Rust. However, - since a Rust toolchain is not mandatory for kernel compilation, - it may only be used in scenarios where Rust is required to be - available (e.g. when ``CONFIG_RUST`` is enabled). +Kbuild offers support for host programs written in Rust. However, +since a Rust toolchain is not mandatory for kernel compilation, +it may only be used in scenarios where Rust is required to be +available (e.g. when ``CONFIG_RUST`` is enabled). - Example:: +Example:: - hostprogs := target - target-rust := y + hostprogs := target + target-rust := y - Kbuild will compile ``target`` using ``target.rs`` as the crate root, - located in the same directory as the ``Makefile``. The crate may - consist of several source files (see ``samples/rust/hostprogs``). +Kbuild will compile ``target`` using ``target.rs`` as the crate root, +located in the same directory as the ``Makefile``. The crate may +consist of several source files (see ``samples/rust/hostprogs``). Controlling compiler options for host programs ---------------------------------------------- - When compiling host programs, it is possible to set specific flags. - The programs will always be compiled utilising $(HOSTCC) passed - the options specified in $(KBUILD_HOSTCFLAGS). - To set flags that will take effect for all host programs created - in that Makefile, use the variable HOST_EXTRACFLAGS. +When compiling host programs, it is possible to set specific flags. +The programs will always be compiled utilising $(HOSTCC) passed +the options specified in $(KBUILD_HOSTCFLAGS). - Example:: +To set flags that will take effect for all host programs created +in that Makefile, use the variable HOST_EXTRACFLAGS. - #scripts/lxdialog/Makefile - HOST_EXTRACFLAGS += -I/usr/include/ncurses +Example:: - To set specific flags for a single file the following construction - is used: + #scripts/lxdialog/Makefile + HOST_EXTRACFLAGS += -I/usr/include/ncurses - Example:: +To set specific flags for a single file the following construction +is used: - #arch/ppc64/boot/Makefile - HOSTCFLAGS_piggyback.o := -DKERNELBASE=$(KERNELBASE) +Example:: - It is also possible to specify additional options to the linker. + #arch/ppc64/boot/Makefile + HOSTCFLAGS_piggyback.o := -DKERNELBASE=$(KERNELBASE) - Example:: +It is also possible to specify additional options to the linker. - #scripts/kconfig/Makefile - HOSTLDLIBS_qconf := -L$(QTDIR)/lib +Example:: - When linking qconf, it will be passed the extra option - "-L$(QTDIR)/lib". + #scripts/kconfig/Makefile + HOSTLDLIBS_qconf := -L$(QTDIR)/lib + +When linking qconf, it will be passed the extra option +"-L$(QTDIR)/lib". When host programs are actually built ------------------------------------- - Kbuild will only build host-programs when they are referenced - as a prerequisite. - This is possible in two ways: +Kbuild will only build host-programs when they are referenced +as a prerequisite. + +This is possible in two ways: - (1) List the prerequisite explicitly in a custom rule. +(1) List the prerequisite explicitly in a custom rule. - Example:: + Example:: - #drivers/pci/Makefile - hostprogs := gen-devlist - $(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist - ( cd $(obj); ./gen-devlist ) < $< + #drivers/pci/Makefile + hostprogs := gen-devlist + $(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist + ( cd $(obj); ./gen-devlist ) < $< - The target $(obj)/devlist.h will not be built before - $(obj)/gen-devlist is updated. Note that references to - the host programs in custom rules must be prefixed with $(obj). + The target $(obj)/devlist.h will not be built before + $(obj)/gen-devlist is updated. Note that references to + the host programs in custom rules must be prefixed with $(obj). - (2) Use always-y +(2) Use always-y - When there is no suitable custom rule, and the host program - shall be built when a makefile is entered, the always-y - variable shall be used. + When there is no suitable custom rule, and the host program + shall be built when a makefile is entered, the always-y + variable shall be used. - Example:: + Example:: - #scripts/lxdialog/Makefile - hostprogs := lxdialog - always-y := $(hostprogs) + #scripts/lxdialog/Makefile + hostprogs := lxdialog + always-y := $(hostprogs) - Kbuild provides the following shorthand for this: + Kbuild provides the following shorthand for this:: - hostprogs-always-y := lxdialog + hostprogs-always-y := lxdialog - This will tell kbuild to build lxdialog even if not referenced in - any rule. + This will tell kbuild to build lxdialog even if not referenced in + any rule. Userspace Program support ========================= @@ -865,100 +875,101 @@ The syntax is quite similar. The difference is to use "userprogs" instead of Simple Userspace Program ------------------------ - The following line tells kbuild that the program bpf-direct shall be - built for the target architecture. +The following line tells kbuild that the program bpf-direct shall be +built for the target architecture. - Example:: +Example:: - userprogs := bpf-direct + userprogs := bpf-direct - Kbuild assumes in the above example that bpf-direct is made from a - single C source file named bpf-direct.c located in the same directory - as the Makefile. +Kbuild assumes in the above example that bpf-direct is made from a +single C source file named bpf-direct.c located in the same directory +as the Makefile. Composite Userspace Programs ---------------------------- - Userspace programs can be made up based on composite objects. - The syntax used to define composite objects for userspace programs is - similar to the syntax used for kernel objects. - $(-objs) lists all objects used to link the final - executable. +Userspace programs can be made up based on composite objects. +The syntax used to define composite objects for userspace programs is +similar to the syntax used for kernel objects. +$(-objs) lists all objects used to link the final +executable. - Example:: +Example:: - #samples/seccomp/Makefile - userprogs := bpf-fancy - bpf-fancy-objs := bpf-fancy.o bpf-helper.o + #samples/seccomp/Makefile + userprogs := bpf-fancy + bpf-fancy-objs := bpf-fancy.o bpf-helper.o - Objects with extension .o are compiled from the corresponding .c - files. In the above example, bpf-fancy.c is compiled to bpf-fancy.o - and bpf-helper.c is compiled to bpf-helper.o. +Objects with extension .o are compiled from the corresponding .c +files. In the above example, bpf-fancy.c is compiled to bpf-fancy.o +and bpf-helper.c is compiled to bpf-helper.o. - Finally, the two .o files are linked to the executable, bpf-fancy. - Note: The syntax -y is not permitted for userspace programs. +Finally, the two .o files are linked to the executable, bpf-fancy. +Note: The syntax -y is not permitted for userspace programs. Controlling compiler options for userspace programs --------------------------------------------------- - When compiling userspace programs, it is possible to set specific flags. - The programs will always be compiled utilising $(CC) passed - the options specified in $(KBUILD_USERCFLAGS). - To set flags that will take effect for all userspace programs created - in that Makefile, use the variable userccflags. +When compiling userspace programs, it is possible to set specific flags. +The programs will always be compiled utilising $(CC) passed +the options specified in $(KBUILD_USERCFLAGS). + +To set flags that will take effect for all userspace programs created +in that Makefile, use the variable userccflags. - Example:: +Example:: - # samples/seccomp/Makefile - userccflags += -I usr/include + # samples/seccomp/Makefile + userccflags += -I usr/include - To set specific flags for a single file the following construction - is used: +To set specific flags for a single file the following construction +is used: - Example:: +Example:: - bpf-helper-userccflags += -I user/include + bpf-helper-userccflags += -I user/include - It is also possible to specify additional options to the linker. +It is also possible to specify additional options to the linker. - Example:: +Example:: - # net/bpfilter/Makefile - bpfilter_umh-userldflags += -static + # net/bpfilter/Makefile + bpfilter_umh-userldflags += -static - When linking bpfilter_umh, it will be passed the extra option -static. +When linking bpfilter_umh, it will be passed the extra option -static. - From command line, :ref:`USERCFLAGS and USERLDFLAGS ` will also be used. +From command line, :ref:`USERCFLAGS and USERLDFLAGS ` will also be used. When userspace programs are actually built ------------------------------------------ - Kbuild builds userspace programs only when told to do so. - There are two ways to do this. +Kbuild builds userspace programs only when told to do so. +There are two ways to do this. - (1) Add it as the prerequisite of another file +(1) Add it as the prerequisite of another file - Example:: + Example:: - #net/bpfilter/Makefile - userprogs := bpfilter_umh - $(obj)/bpfilter_umh_blob.o: $(obj)/bpfilter_umh + #net/bpfilter/Makefile + userprogs := bpfilter_umh + $(obj)/bpfilter_umh_blob.o: $(obj)/bpfilter_umh - $(obj)/bpfilter_umh is built before $(obj)/bpfilter_umh_blob.o + $(obj)/bpfilter_umh is built before $(obj)/bpfilter_umh_blob.o - (2) Use always-y +(2) Use always-y - Example:: + Example:: - userprogs := binderfs_example - always-y := $(userprogs) + userprogs := binderfs_example + always-y := $(userprogs) - Kbuild provides the following shorthand for this: + Kbuild provides the following shorthand for this:: - userprogs-always-y := binderfs_example + userprogs-always-y := binderfs_example - This will tell Kbuild to build binderfs_example when it visits this - Makefile. + This will tell Kbuild to build binderfs_example when it visits this + Makefile. Kbuild clean infrastructure =========================== @@ -974,10 +985,10 @@ source tree when "make clean" is executed. Additional files or directories can be specified in kbuild makefiles by use of $(clean-files). - Example:: +Example:: - #lib/Makefile - clean-files := crc32table.h + #lib/Makefile + clean-files := crc32table.h When executing "make clean", the file "crc32table.h" will be deleted. Kbuild will assume files to be in the same relative directory as the @@ -990,10 +1001,10 @@ Usually kbuild descends down in subdirectories due to "obj-* := dir/", but in the architecture makefiles where the kbuild infrastructure is not sufficient this sometimes needs to be explicit. - Example:: +Example:: - #arch/x86/boot/Makefile - subdir- := compressed + #arch/x86/boot/Makefile + subdir- := compressed The above assignment instructs kbuild to descend down in the directory compressed/ when "make clean" is executed. @@ -1010,442 +1021,461 @@ Architecture Makefiles The top level Makefile sets up the environment and does the preparation, before starting to descend down in the individual directories. + The top level makefile contains the generic part, whereas arch/$(SRCARCH)/Makefile contains what is required to set up kbuild for said architecture. + To do so, arch/$(SRCARCH)/Makefile sets up a number of variables and defines a few targets. When kbuild executes, the following steps are followed (roughly): 1) Configuration of the kernel => produce .config + 2) Store kernel version in include/linux/version.h + 3) Updating all other prerequisites to the target prepare: + - Additional prerequisites are specified in arch/$(SRCARCH)/Makefile + 4) Recursively descend down in all directories listed in init-* core* drivers-* net-* libs-* and build all targets. + - The values of the above variables are expanded in arch/$(SRCARCH)/Makefile. + 5) All object files are then linked and the resulting file vmlinux is located at the root of the obj tree. The very first objects linked are listed in scripts/head-object-list.txt. + 6) Finally, the architecture-specific part does any required post processing and builds the final bootimage. + - This includes building boot records - Preparing initrd images and the like - Set variables to tweak the build to the architecture ---------------------------------------------------- - KBUILD_LDFLAGS - Generic $(LD) options +KBUILD_LDFLAGS + Generic $(LD) options - Flags used for all invocations of the linker. - Often specifying the emulation is sufficient. + Flags used for all invocations of the linker. + Often specifying the emulation is sufficient. - Example:: + Example:: - #arch/s390/Makefile - KBUILD_LDFLAGS := -m elf_s390 + #arch/s390/Makefile + KBUILD_LDFLAGS := -m elf_s390 - Note: ldflags-y can be used to further customise - the flags used. See `Non-builtin vmlinux targets - extra-y`_. + Note: ldflags-y can be used to further customise + the flags used. See `Non-builtin vmlinux targets - extra-y`_. - LDFLAGS_vmlinux - Options for $(LD) when linking vmlinux +LDFLAGS_vmlinux + Options for $(LD) when linking vmlinux - LDFLAGS_vmlinux is used to specify additional flags to pass to - the linker when linking the final vmlinux image. - LDFLAGS_vmlinux uses the LDFLAGS_$@ support. + LDFLAGS_vmlinux is used to specify additional flags to pass to + the linker when linking the final vmlinux image. - Example:: + LDFLAGS_vmlinux uses the LDFLAGS_$@ support. - #arch/x86/Makefile - LDFLAGS_vmlinux := -e stext + Example:: - OBJCOPYFLAGS - objcopy flags + #arch/x86/Makefile + LDFLAGS_vmlinux := -e stext - When $(call if_changed,objcopy) is used to translate a .o file, - the flags specified in OBJCOPYFLAGS will be used. - $(call if_changed,objcopy) is often used to generate raw binaries on - vmlinux. +OBJCOPYFLAGS + objcopy flags - Example:: + When $(call if_changed,objcopy) is used to translate a .o file, + the flags specified in OBJCOPYFLAGS will be used. - #arch/s390/Makefile - OBJCOPYFLAGS := -O binary + $(call if_changed,objcopy) is often used to generate raw binaries on + vmlinux. - #arch/s390/boot/Makefile - $(obj)/image: vmlinux FORCE - $(call if_changed,objcopy) + Example:: - In this example, the binary $(obj)/image is a binary version of - vmlinux. The usage of $(call if_changed,xxx) will be described later. + #arch/s390/Makefile + OBJCOPYFLAGS := -O binary - KBUILD_AFLAGS - Assembler flags + #arch/s390/boot/Makefile + $(obj)/image: vmlinux FORCE + $(call if_changed,objcopy) - Default value - see top level Makefile - Append or modify as required per architecture. + In this example, the binary $(obj)/image is a binary version of + vmlinux. The usage of $(call if_changed,xxx) will be described later. - Example:: +KBUILD_AFLAGS + Assembler flags - #arch/sparc64/Makefile - KBUILD_AFLAGS += -m64 -mcpu=ultrasparc + Default value - see top level Makefile. - KBUILD_CFLAGS - $(CC) compiler flags + Append or modify as required per architecture. - Default value - see top level Makefile - Append or modify as required per architecture. + Example:: - Often, the KBUILD_CFLAGS variable depends on the configuration. + #arch/sparc64/Makefile + KBUILD_AFLAGS += -m64 -mcpu=ultrasparc - Example:: +KBUILD_CFLAGS + $(CC) compiler flags - #arch/x86/boot/compressed/Makefile - cflags-$(CONFIG_X86_32) := -march=i386 - cflags-$(CONFIG_X86_64) := -mcmodel=small - KBUILD_CFLAGS += $(cflags-y) + Default value - see top level Makefile. - Many arch Makefiles dynamically run the target C compiler to - probe supported options:: + Append or modify as required per architecture. - #arch/x86/Makefile + Often, the KBUILD_CFLAGS variable depends on the configuration. - ... - cflags-$(CONFIG_MPENTIUMII) += $(call cc-option,\ - -march=pentium2,-march=i686) - ... - # Disable unit-at-a-time mode ... - KBUILD_CFLAGS += $(call cc-option,-fno-unit-at-a-time) - ... + Example:: + + #arch/x86/boot/compressed/Makefile + cflags-$(CONFIG_X86_32) := -march=i386 + cflags-$(CONFIG_X86_64) := -mcmodel=small + KBUILD_CFLAGS += $(cflags-y) + + Many arch Makefiles dynamically run the target C compiler to + probe supported options:: + + #arch/x86/Makefile + ... + cflags-$(CONFIG_MPENTIUMII) += $(call cc-option,\ + -march=pentium2,-march=i686) + ... + # Disable unit-at-a-time mode ... + KBUILD_CFLAGS += $(call cc-option,-fno-unit-at-a-time) + ... - The first example utilises the trick that a config option expands - to 'y' when selected. - KBUILD_RUSTFLAGS - $(RUSTC) compiler flags + The first example utilises the trick that a config option expands + to 'y' when selected. - Default value - see top level Makefile - Append or modify as required per architecture. +KBUILD_RUSTFLAGS + $(RUSTC) compiler flags - Often, the KBUILD_RUSTFLAGS variable depends on the configuration. + Default value - see top level Makefile. - Note that target specification file generation (for ``--target``) - is handled in ``scripts/generate_rust_target.rs``. + Append or modify as required per architecture. - KBUILD_AFLAGS_KERNEL - Assembler options specific for built-in + Often, the KBUILD_RUSTFLAGS variable depends on the configuration. - $(KBUILD_AFLAGS_KERNEL) contains extra C compiler flags used to compile - resident kernel code. + Note that target specification file generation (for ``--target``) + is handled in ``scripts/generate_rust_target.rs``. - KBUILD_AFLAGS_MODULE - Assembler options specific for modules +KBUILD_AFLAGS_KERNEL + Assembler options specific for built-in - $(KBUILD_AFLAGS_MODULE) is used to add arch-specific options that - are used for assembler. + $(KBUILD_AFLAGS_KERNEL) contains extra C compiler flags used to compile + resident kernel code. - From commandline AFLAGS_MODULE shall be used (see kbuild.rst). +KBUILD_AFLAGS_MODULE + Assembler options specific for modules - KBUILD_CFLAGS_KERNEL - $(CC) options specific for built-in + $(KBUILD_AFLAGS_MODULE) is used to add arch-specific options that + are used for assembler. - $(KBUILD_CFLAGS_KERNEL) contains extra C compiler flags used to compile - resident kernel code. + From commandline AFLAGS_MODULE shall be used (see kbuild.rst). - KBUILD_CFLAGS_MODULE - Options for $(CC) when building modules +KBUILD_CFLAGS_KERNEL + $(CC) options specific for built-in - $(KBUILD_CFLAGS_MODULE) is used to add arch-specific options that - are used for $(CC). - From commandline CFLAGS_MODULE shall be used (see kbuild.rst). + $(KBUILD_CFLAGS_KERNEL) contains extra C compiler flags used to compile + resident kernel code. - KBUILD_RUSTFLAGS_KERNEL - $(RUSTC) options specific for built-in +KBUILD_CFLAGS_MODULE + Options for $(CC) when building modules - $(KBUILD_RUSTFLAGS_KERNEL) contains extra Rust compiler flags used to - compile resident kernel code. + $(KBUILD_CFLAGS_MODULE) is used to add arch-specific options that + are used for $(CC). - KBUILD_RUSTFLAGS_MODULE - Options for $(RUSTC) when building modules + From commandline CFLAGS_MODULE shall be used (see kbuild.rst). - $(KBUILD_RUSTFLAGS_MODULE) is used to add arch-specific options that - are used for $(RUSTC). - From commandline RUSTFLAGS_MODULE shall be used (see kbuild.rst). +KBUILD_RUSTFLAGS_KERNEL + $(RUSTC) options specific for built-in - KBUILD_LDFLAGS_MODULE - Options for $(LD) when linking modules + $(KBUILD_RUSTFLAGS_KERNEL) contains extra Rust compiler flags used to + compile resident kernel code. - $(KBUILD_LDFLAGS_MODULE) is used to add arch-specific options - used when linking modules. This is often a linker script. +KBUILD_RUSTFLAGS_MODULE + Options for $(RUSTC) when building modules - From commandline LDFLAGS_MODULE shall be used (see kbuild.rst). + $(KBUILD_RUSTFLAGS_MODULE) is used to add arch-specific options that + are used for $(RUSTC). - KBUILD_LDS + From commandline RUSTFLAGS_MODULE shall be used (see kbuild.rst). - The linker script with full path. Assigned by the top-level Makefile. +KBUILD_LDFLAGS_MODULE + Options for $(LD) when linking modules - KBUILD_LDS_MODULE + $(KBUILD_LDFLAGS_MODULE) is used to add arch-specific options + used when linking modules. This is often a linker script. - The module linker script with full path. Assigned by the top-level - Makefile and additionally by the arch Makefile. + From commandline LDFLAGS_MODULE shall be used (see kbuild.rst). - KBUILD_VMLINUX_OBJS +KBUILD_LDS + The linker script with full path. Assigned by the top-level Makefile. - All object files for vmlinux. They are linked to vmlinux in the same - order as listed in KBUILD_VMLINUX_OBJS. +KBUILD_LDS_MODULE + The module linker script with full path. Assigned by the top-level + Makefile and additionally by the arch Makefile. - The objects listed in scripts/head-object-list.txt are exceptions; - they are placed before the other objects. +KBUILD_VMLINUX_OBJS + All object files for vmlinux. They are linked to vmlinux in the same + order as listed in KBUILD_VMLINUX_OBJS. - KBUILD_VMLINUX_LIBS + The objects listed in scripts/head-object-list.txt are exceptions; + they are placed before the other objects. - All .a "lib" files for vmlinux. KBUILD_VMLINUX_OBJS and - KBUILD_VMLINUX_LIBS together specify all the object files used to - link vmlinux. +KBUILD_VMLINUX_LIBS + All .a "lib" files for vmlinux. KBUILD_VMLINUX_OBJS and + KBUILD_VMLINUX_LIBS together specify all the object files used to + link vmlinux. Add prerequisites to archheaders -------------------------------- - The archheaders: rule is used to generate header files that - may be installed into user space by "make header_install". - - It is run before "make archprepare" when run on the - architecture itself. +The archheaders: rule is used to generate header files that +may be installed into user space by "make header_install". +It is run before "make archprepare" when run on the +architecture itself. Add prerequisites to archprepare -------------------------------- - The archprepare: rule is used to list prerequisites that need to be - built before starting to descend down in the subdirectories. - This is usually used for header files containing assembler constants. +The archprepare: rule is used to list prerequisites that need to be +built before starting to descend down in the subdirectories. - Example:: +This is usually used for header files containing assembler constants. - #arch/arm/Makefile - archprepare: maketools +Example:: - In this example, the file target maketools will be processed - before descending down in the subdirectories. - See also chapter XXX-TODO that describes how kbuild supports - generating offset header files. + #arch/arm/Makefile + archprepare: maketools +In this example, the file target maketools will be processed +before descending down in the subdirectories. + +See also chapter XXX-TODO that describes how kbuild supports +generating offset header files. List directories to visit when descending ----------------------------------------- - An arch Makefile cooperates with the top Makefile to define variables - which specify how to build the vmlinux file. Note that there is no - corresponding arch-specific section for modules; the module-building - machinery is all architecture-independent. - +An arch Makefile cooperates with the top Makefile to define variables +which specify how to build the vmlinux file. Note that there is no +corresponding arch-specific section for modules; the module-building +machinery is all architecture-independent. - core-y, libs-y, drivers-y +core-y, libs-y, drivers-y + $(libs-y) lists directories where a lib.a archive can be located. - $(libs-y) lists directories where a lib.a archive can be located. + The rest list directories where a built-in.a object file can be + located. - The rest list directories where a built-in.a object file can be - located. + Then the rest follows in this order: - Then the rest follows in this order: + $(core-y), $(libs-y), $(drivers-y) - $(core-y), $(libs-y), $(drivers-y) + The top level Makefile defines values for all generic directories, + and arch/$(SRCARCH)/Makefile only adds architecture-specific + directories. - The top level Makefile defines values for all generic directories, - and arch/$(SRCARCH)/Makefile only adds architecture-specific - directories. + Example:: - Example:: + # arch/sparc/Makefile + core-y += arch/sparc/ - # arch/sparc/Makefile - core-y += arch/sparc/ + libs-y += arch/sparc/prom/ + libs-y += arch/sparc/lib/ - libs-y += arch/sparc/prom/ - libs-y += arch/sparc/lib/ - - drivers-$(CONFIG_PM) += arch/sparc/power/ + drivers-$(CONFIG_PM) += arch/sparc/power/ Architecture-specific boot images --------------------------------- - An arch Makefile specifies goals that take the vmlinux file, compress - it, wrap it in bootstrapping code, and copy the resulting files - somewhere. This includes various kinds of installation commands. - The actual goals are not standardized across architectures. +An arch Makefile specifies goals that take the vmlinux file, compress +it, wrap it in bootstrapping code, and copy the resulting files +somewhere. This includes various kinds of installation commands. +The actual goals are not standardized across architectures. + +It is common to locate any additional processing in a boot/ +directory below arch/$(SRCARCH)/. - It is common to locate any additional processing in a boot/ - directory below arch/$(SRCARCH)/. +Kbuild does not provide any smart way to support building a +target specified in boot/. Therefore arch/$(SRCARCH)/Makefile shall +call make manually to build a target in boot/. - Kbuild does not provide any smart way to support building a - target specified in boot/. Therefore arch/$(SRCARCH)/Makefile shall - call make manually to build a target in boot/. +The recommended approach is to include shortcuts in +arch/$(SRCARCH)/Makefile, and use the full path when calling down +into the arch/$(SRCARCH)/boot/Makefile. - The recommended approach is to include shortcuts in - arch/$(SRCARCH)/Makefile, and use the full path when calling down - into the arch/$(SRCARCH)/boot/Makefile. +Example:: - Example:: + #arch/x86/Makefile + boot := arch/x86/boot + bzImage: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ - #arch/x86/Makefile - boot := arch/x86/boot - bzImage: vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ +"$(Q)$(MAKE) $(build)=" is the recommended way to invoke +make in a subdirectory. - "$(Q)$(MAKE) $(build)=" is the recommended way to invoke - make in a subdirectory. +There are no rules for naming architecture-specific targets, +but executing "make help" will list all relevant targets. +To support this, $(archhelp) must be defined. - There are no rules for naming architecture-specific targets, - but executing "make help" will list all relevant targets. - To support this, $(archhelp) must be defined. +Example:: - Example:: + #arch/x86/Makefile + define archhelp + echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)' + endif - #arch/x86/Makefile - define archhelp - echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)' - endif +When make is executed without arguments, the first goal encountered +will be built. In the top level Makefile the first goal present +is all:. - When make is executed without arguments, the first goal encountered - will be built. In the top level Makefile the first goal present - is all:. - An architecture shall always, per default, build a bootable image. - In "make help", the default goal is highlighted with a '*'. - Add a new prerequisite to all: to select a default goal different - from vmlinux. +An architecture shall always, per default, build a bootable image. +In "make help", the default goal is highlighted with a '*'. - Example:: +Add a new prerequisite to all: to select a default goal different +from vmlinux. - #arch/x86/Makefile - all: bzImage +Example:: - When "make" is executed without arguments, bzImage will be built. + #arch/x86/Makefile + all: bzImage + +When "make" is executed without arguments, bzImage will be built. Commands useful for building a boot image ----------------------------------------- - Kbuild provides a few macros that are useful when building a - boot image. +Kbuild provides a few macros that are useful when building a +boot image. + +ld + Link target. Often, LDFLAGS_$@ is used to set specific options to ld. - ld - Link target. Often, LDFLAGS_$@ is used to set specific options to ld. + Example:: - Example:: + #arch/x86/boot/Makefile + LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary + LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext - #arch/x86/boot/Makefile - LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary - LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext + targets += setup setup.o bootsect bootsect.o + $(obj)/setup $(obj)/bootsect: %: %.o FORCE + $(call if_changed,ld) - targets += setup setup.o bootsect bootsect.o - $(obj)/setup $(obj)/bootsect: %: %.o FORCE - $(call if_changed,ld) + In this example, there are two possible targets, requiring different + options to the linker. The linker options are specified using the + LDFLAGS_$@ syntax - one for each potential target. - In this example, there are two possible targets, requiring different - options to the linker. The linker options are specified using the - LDFLAGS_$@ syntax - one for each potential target. - $(targets) are assigned all potential targets, by which kbuild knows - the targets and will: + $(targets) are assigned all potential targets, by which kbuild knows + the targets and will: - 1) check for commandline changes - 2) delete target during make clean + 1) check for commandline changes + 2) delete target during make clean - The ": %: %.o" part of the prerequisite is a shorthand that - frees us from listing the setup.o and bootsect.o files. + The ": %: %.o" part of the prerequisite is a shorthand that + frees us from listing the setup.o and bootsect.o files. - Note: - It is a common mistake to forget the "targets :=" assignment, - resulting in the target file being recompiled for no - obvious reason. + Note: + It is a common mistake to forget the "targets :=" assignment, + resulting in the target file being recompiled for no + obvious reason. - objcopy - Copy binary. Uses OBJCOPYFLAGS usually specified in - arch/$(SRCARCH)/Makefile. - OBJCOPYFLAGS_$@ may be used to set additional options. +objcopy + Copy binary. Uses OBJCOPYFLAGS usually specified in + arch/$(SRCARCH)/Makefile. - gzip - Compress target. Use maximum compression to compress target. + OBJCOPYFLAGS_$@ may be used to set additional options. - Example:: +gzip + Compress target. Use maximum compression to compress target. - #arch/x86/boot/compressed/Makefile - $(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE - $(call if_changed,gzip) + Example:: - dtc - Create flattened device tree blob object suitable for linking - into vmlinux. Device tree blobs linked into vmlinux are placed - in an init section in the image. Platform code *must* copy the - blob to non-init memory prior to calling unflatten_device_tree(). + #arch/x86/boot/compressed/Makefile + $(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE + $(call if_changed,gzip) - To use this command, simply add `*.dtb` into obj-y or targets, or make - some other target depend on `%.dtb` +dtc + Create flattened device tree blob object suitable for linking + into vmlinux. Device tree blobs linked into vmlinux are placed + in an init section in the image. Platform code *must* copy the + blob to non-init memory prior to calling unflatten_device_tree(). - A central rule exists to create `$(obj)/%.dtb` from `$(src)/%.dts`; - architecture Makefiles do no need to explicitly write out that rule. + To use this command, simply add `*.dtb` into obj-y or targets, or make + some other target depend on `%.dtb` - Example:: + A central rule exists to create `$(obj)/%.dtb` from `$(src)/%.dts`; + architecture Makefiles do no need to explicitly write out that rule. - targets += $(dtb-y) - DTC_FLAGS ?= -p 1024 + Example:: + + targets += $(dtb-y) + DTC_FLAGS ?= -p 1024 Preprocessing linker scripts ---------------------------- - When the vmlinux image is built, the linker script - arch/$(SRCARCH)/kernel/vmlinux.lds is used. - The script is a preprocessed variant of the file vmlinux.lds.S - located in the same directory. - kbuild knows .lds files and includes a rule `*lds.S` -> `*lds`. +When the vmlinux image is built, the linker script +arch/$(SRCARCH)/kernel/vmlinux.lds is used. + +The script is a preprocessed variant of the file vmlinux.lds.S +located in the same directory. + +kbuild knows .lds files and includes a rule `*lds.S` -> `*lds`. + +Example:: - Example:: + #arch/x86/kernel/Makefile + extra-y := vmlinux.lds - #arch/x86/kernel/Makefile - extra-y := vmlinux.lds +The assignment to extra-y is used to tell kbuild to build the +target vmlinux.lds. - The assignment to extra-y is used to tell kbuild to build the - target vmlinux.lds. - The assignment to $(CPPFLAGS_vmlinux.lds) tells kbuild to use the - specified options when building the target vmlinux.lds. +The assignment to $(CPPFLAGS_vmlinux.lds) tells kbuild to use the +specified options when building the target vmlinux.lds. - When building the `*.lds` target, kbuild uses the variables:: +When building the `*.lds` target, kbuild uses the variables:: - KBUILD_CPPFLAGS : Set in top-level Makefile - cppflags-y : May be set in the kbuild makefile - CPPFLAGS_$(@F) : Target-specific flags. - Note that the full filename is used in this - assignment. + KBUILD_CPPFLAGS : Set in top-level Makefile + cppflags-y : May be set in the kbuild makefile + CPPFLAGS_$(@F) : Target-specific flags. + Note that the full filename is used in this + assignment. - The kbuild infrastructure for `*lds` files is used in several - architecture-specific files. +The kbuild infrastructure for `*lds` files is used in several +architecture-specific files. Generic header files -------------------- - The directory include/asm-generic contains the header files - that may be shared between individual architectures. - The recommended approach how to use a generic header file is - to list the file in the Kbuild file. - See `generic-y`_ for further info on syntax etc. +The directory include/asm-generic contains the header files +that may be shared between individual architectures. + +The recommended approach how to use a generic header file is +to list the file in the Kbuild file. + +See `generic-y`_ for further info on syntax etc. Post-link pass -------------- - If the file arch/xxx/Makefile.postlink exists, this makefile - will be invoked for post-link objects (vmlinux and modules.ko) - for architectures to run post-link passes on. Must also handle - the clean target. +If the file arch/xxx/Makefile.postlink exists, this makefile +will be invoked for post-link objects (vmlinux and modules.ko) +for architectures to run post-link passes on. Must also handle +the clean target. - This pass runs after kallsyms generation. If the architecture - needs to modify symbol locations, rather than manipulate the - kallsyms, it may be easier to add another postlink target for - .tmp_vmlinux? targets to be called from link-vmlinux.sh. +This pass runs after kallsyms generation. If the architecture +needs to modify symbol locations, rather than manipulate the +kallsyms, it may be easier to add another postlink target for +.tmp_vmlinux? targets to be called from link-vmlinux.sh. - For example, powerpc uses this to check relocation sanity of - the linked vmlinux file. +For example, powerpc uses this to check relocation sanity of +the linked vmlinux file. Kbuild syntax for exported headers ================================== @@ -1453,6 +1483,7 @@ Kbuild syntax for exported headers The kernel includes a set of headers that is exported to userspace. Many headers can be exported as-is but other headers require a minimal pre-processing before they are ready for user-space. + The pre-processing does: - drop kernel-specific annotations @@ -1465,136 +1496,136 @@ are exported. A Kbuild file may be defined under arch//include/uapi/asm/ and arch//include/asm/ to list asm files coming from asm-generic. + See subsequent chapter for the syntax of the Kbuild file. no-export-headers ----------------- - no-export-headers is essentially used by include/uapi/linux/Kbuild to - avoid exporting specific headers (e.g. kvm.h) on architectures that do - not support it. It should be avoided as much as possible. +no-export-headers is essentially used by include/uapi/linux/Kbuild to +avoid exporting specific headers (e.g. kvm.h) on architectures that do +not support it. It should be avoided as much as possible. generic-y --------- - If an architecture uses a verbatim copy of a header from - include/asm-generic then this is listed in the file - arch/$(SRCARCH)/include/asm/Kbuild like this: +If an architecture uses a verbatim copy of a header from +include/asm-generic then this is listed in the file +arch/$(SRCARCH)/include/asm/Kbuild like this: - Example:: +Example:: - #arch/x86/include/asm/Kbuild - generic-y += termios.h - generic-y += rtc.h + #arch/x86/include/asm/Kbuild + generic-y += termios.h + generic-y += rtc.h - During the prepare phase of the build a wrapper include - file is generated in the directory:: +During the prepare phase of the build a wrapper include +file is generated in the directory:: - arch/$(SRCARCH)/include/generated/asm + arch/$(SRCARCH)/include/generated/asm - When a header is exported where the architecture uses - the generic header a similar wrapper is generated as part - of the set of exported headers in the directory:: +When a header is exported where the architecture uses +the generic header a similar wrapper is generated as part +of the set of exported headers in the directory:: - usr/include/asm + usr/include/asm - The generated wrapper will in both cases look like the following: +The generated wrapper will in both cases look like the following: - Example: termios.h:: +Example: termios.h:: - #include + #include generated-y ----------- - If an architecture generates other header files alongside generic-y - wrappers, generated-y specifies them. +If an architecture generates other header files alongside generic-y +wrappers, generated-y specifies them. - This prevents them being treated as stale asm-generic wrappers and - removed. +This prevents them being treated as stale asm-generic wrappers and +removed. - Example:: +Example:: - #arch/x86/include/asm/Kbuild - generated-y += syscalls_32.h + #arch/x86/include/asm/Kbuild + generated-y += syscalls_32.h mandatory-y ----------- - mandatory-y is essentially used by include/(uapi/)asm-generic/Kbuild - to define the minimum set of ASM headers that all architectures must have. +mandatory-y is essentially used by include/(uapi/)asm-generic/Kbuild +to define the minimum set of ASM headers that all architectures must have. - This works like optional generic-y. If a mandatory header is missing - in arch/$(SRCARCH)/include/(uapi/)/asm, Kbuild will automatically - generate a wrapper of the asm-generic one. +This works like optional generic-y. If a mandatory header is missing +in arch/$(SRCARCH)/include/(uapi/)/asm, Kbuild will automatically +generate a wrapper of the asm-generic one. Kbuild Variables ================ The top Makefile exports the following variables: - VERSION, PATCHLEVEL, SUBLEVEL, EXTRAVERSION - These variables define the current kernel version. A few arch - Makefiles actually use these values directly; they should use - $(KERNELRELEASE) instead. - - $(VERSION), $(PATCHLEVEL), and $(SUBLEVEL) define the basic - three-part version number, such as "2", "4", and "0". These three - values are always numeric. - - $(EXTRAVERSION) defines an even tinier sublevel for pre-patches - or additional patches. It is usually some non-numeric string - such as "-pre4", and is often blank. - - KERNELRELEASE - $(KERNELRELEASE) is a single string such as "2.4.0-pre4", suitable - for constructing installation directory names or showing in - version strings. Some arch Makefiles use it for this purpose. - - ARCH - This variable defines the target architecture, such as "i386", - "arm", or "sparc". Some kbuild Makefiles test $(ARCH) to - determine which files to compile. - - By default, the top Makefile sets $(ARCH) to be the same as the - host system architecture. For a cross build, a user may - override the value of $(ARCH) on the command line:: - - make ARCH=m68k ... - - SRCARCH - This variable specifies the directory in arch/ to build. - - ARCH and SRCARCH may not necessarily match. A couple of arch - directories are biarch, that is, a single `arch/*/` directory supports - both 32-bit and 64-bit. - - For example, you can pass in ARCH=i386, ARCH=x86_64, or ARCH=x86. - For all of them, SRCARCH=x86 because arch/x86/ supports both i386 and - x86_64. - - INSTALL_PATH - This variable defines a place for the arch Makefiles to install - the resident kernel image and System.map file. - Use this for architecture-specific install targets. - - INSTALL_MOD_PATH, MODLIB - $(INSTALL_MOD_PATH) specifies a prefix to $(MODLIB) for module - installation. This variable is not defined in the Makefile but - may be passed in by the user if desired. - - $(MODLIB) specifies the directory for module installation. - The top Makefile defines $(MODLIB) to - $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE). The user may - override this value on the command line if desired. - - INSTALL_MOD_STRIP - If this variable is specified, it will cause modules to be stripped - after they are installed. If INSTALL_MOD_STRIP is '1', then the - default option --strip-debug will be used. Otherwise, the - INSTALL_MOD_STRIP value will be used as the option(s) to the strip - command. - +VERSION, PATCHLEVEL, SUBLEVEL, EXTRAVERSION + These variables define the current kernel version. A few arch + Makefiles actually use these values directly; they should use + $(KERNELRELEASE) instead. + + $(VERSION), $(PATCHLEVEL), and $(SUBLEVEL) define the basic + three-part version number, such as "2", "4", and "0". These three + values are always numeric. + + $(EXTRAVERSION) defines an even tinier sublevel for pre-patches + or additional patches. It is usually some non-numeric string + such as "-pre4", and is often blank. + +KERNELRELEASE + $(KERNELRELEASE) is a single string such as "2.4.0-pre4", suitable + for constructing installation directory names or showing in + version strings. Some arch Makefiles use it for this purpose. + +ARCH + This variable defines the target architecture, such as "i386", + "arm", or "sparc". Some kbuild Makefiles test $(ARCH) to + determine which files to compile. + + By default, the top Makefile sets $(ARCH) to be the same as the + host system architecture. For a cross build, a user may + override the value of $(ARCH) on the command line:: + + make ARCH=m68k ... + +SRCARCH + This variable specifies the directory in arch/ to build. + + ARCH and SRCARCH may not necessarily match. A couple of arch + directories are biarch, that is, a single `arch/*/` directory supports + both 32-bit and 64-bit. + + For example, you can pass in ARCH=i386, ARCH=x86_64, or ARCH=x86. + For all of them, SRCARCH=x86 because arch/x86/ supports both i386 and + x86_64. + +INSTALL_PATH + This variable defines a place for the arch Makefiles to install + the resident kernel image and System.map file. + Use this for architecture-specific install targets. + +INSTALL_MOD_PATH, MODLIB + $(INSTALL_MOD_PATH) specifies a prefix to $(MODLIB) for module + installation. This variable is not defined in the Makefile but + may be passed in by the user if desired. + + $(MODLIB) specifies the directory for module installation. + The top Makefile defines $(MODLIB) to + $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE). The user may + override this value on the command line if desired. + +INSTALL_MOD_STRIP + If this variable is specified, it will cause modules to be stripped + after they are installed. If INSTALL_MOD_STRIP is '1', then the + default option --strip-debug will be used. Otherwise, the + INSTALL_MOD_STRIP value will be used as the option(s) to the strip + command. Makefile language =================