diff mbox series

[bpf-next,v2,4/4] kbuild: refactor module BTF rule

Message ID 20231018151950.205265-4-masahiroy@kernel.org (mailing list archive)
State New, archived
Headers show
Series [bpf-next,v2,1/4] kbuild: remove ARCH_POSTLINK from module builds | expand

Commit Message

Masahiro Yamada Oct. 18, 2023, 3:19 p.m. UTC
newer_prereqs_except and if_changed_except are ugly hacks of the
newer-prereqs and if_changed in scripts/Kbuild.include.

Remove.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---

Changes in v2:
  - Fix if_changed_except to if_changed

 scripts/Makefile.modfinal | 25 ++++++-------------------
 1 file changed, 6 insertions(+), 19 deletions(-)

Comments

Nicolas Schier Oct. 18, 2023, 3:49 p.m. UTC | #1
On Thu, Oct 19, 2023 at 12:19:50AM +0900 Masahiro Yamada wrote:
> newer_prereqs_except and if_changed_except are ugly hacks of the
> newer-prereqs and if_changed in scripts/Kbuild.include.
> 
> Remove.
> 
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---
> 
> Changes in v2:
>   - Fix if_changed_except to if_changed

thanks

Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>



>  scripts/Makefile.modfinal | 25 ++++++-------------------
>  1 file changed, 6 insertions(+), 19 deletions(-)
> 
> diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> index 9fd7a26e4fe9..fc07854bb7b9 100644
> --- a/scripts/Makefile.modfinal
> +++ b/scripts/Makefile.modfinal
> @@ -19,6 +19,9 @@ vmlinux :=
>  ifdef CONFIG_DEBUG_INFO_BTF_MODULES
>  ifneq ($(wildcard vmlinux),)
>  vmlinux := vmlinux
> +cmd_btf = ; \
> +	LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> +	$(RESOLVE_BTFIDS) -b vmlinux $@
>  else
>  $(warning Skipping BTF generation due to unavailability of vmlinux)
>  endif
> @@ -41,27 +44,11 @@ quiet_cmd_ld_ko_o = LD [M]  $@
>        cmd_ld_ko_o +=							\
>  	$(LD) -r $(KBUILD_LDFLAGS)					\
>  		$(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)		\
> -		-T scripts/module.lds -o $@ $(filter %.o, $^)
> +		-T scripts/module.lds -o $@ $(filter %.o, $^)		\
> +	$(cmd_btf)
>  
> -quiet_cmd_btf_ko = BTF [M] $@
> -      cmd_btf_ko = 							\
> -		LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> -		$(RESOLVE_BTFIDS) -b vmlinux $@
> -
> -# Same as newer-prereqs, but allows to exclude specified extra dependencies
> -newer_prereqs_except = $(filter-out $(PHONY) $(1),$?)
> -
> -# Same as if_changed, but allows to exclude specified extra dependencies
> -if_changed_except = $(if $(call newer_prereqs_except,$(2))$(cmd-check),      \
> -	$(cmd);                                                              \
> -	printf '%s\n' 'savedcmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:)
> -
> -# Re-generate module BTFs if either module's .ko or vmlinux changed
>  %.ko: %.o %.mod.o scripts/module.lds $(vmlinux) FORCE
> -	+$(call if_changed_except,ld_ko_o,vmlinux)
> -ifdef vmlinux
> -	+$(if $(newer-prereqs),$(call cmd,btf_ko))
> -endif
> +	+$(call if_changed,ld_ko_o)
>  
>  targets += $(modules:%.o=%.ko) $(modules:%.o=%.mod.o)
>  
> -- 
> 2.40.1
Jiri Olsa Oct. 19, 2023, 8:15 a.m. UTC | #2
On Thu, Oct 19, 2023 at 12:19:50AM +0900, Masahiro Yamada wrote:
> newer_prereqs_except and if_changed_except are ugly hacks of the
> newer-prereqs and if_changed in scripts/Kbuild.include.
> 
> Remove.
> 
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---
> 
> Changes in v2:
>   - Fix if_changed_except to if_changed
> 
>  scripts/Makefile.modfinal | 25 ++++++-------------------
>  1 file changed, 6 insertions(+), 19 deletions(-)
> 
> diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> index 9fd7a26e4fe9..fc07854bb7b9 100644
> --- a/scripts/Makefile.modfinal
> +++ b/scripts/Makefile.modfinal
> @@ -19,6 +19,9 @@ vmlinux :=
>  ifdef CONFIG_DEBUG_INFO_BTF_MODULES
>  ifneq ($(wildcard vmlinux),)
>  vmlinux := vmlinux
> +cmd_btf = ; \
> +	LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> +	$(RESOLVE_BTFIDS) -b vmlinux $@
>  else
>  $(warning Skipping BTF generation due to unavailability of vmlinux)
>  endif
> @@ -41,27 +44,11 @@ quiet_cmd_ld_ko_o = LD [M]  $@
>        cmd_ld_ko_o +=							\
>  	$(LD) -r $(KBUILD_LDFLAGS)					\
>  		$(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)		\
> -		-T scripts/module.lds -o $@ $(filter %.o, $^)
> +		-T scripts/module.lds -o $@ $(filter %.o, $^)		\
> +	$(cmd_btf)
>  
> -quiet_cmd_btf_ko = BTF [M] $@

nit not sure it's intentional but we no longer display 'BTF [M] ...ko' lines,
I don't mind not displaying that, but we should mention that in changelog

jirka

> -      cmd_btf_ko = 							\
> -		LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> -		$(RESOLVE_BTFIDS) -b vmlinux $@
> -
> -# Same as newer-prereqs, but allows to exclude specified extra dependencies
> -newer_prereqs_except = $(filter-out $(PHONY) $(1),$?)
> -
> -# Same as if_changed, but allows to exclude specified extra dependencies
> -if_changed_except = $(if $(call newer_prereqs_except,$(2))$(cmd-check),      \
> -	$(cmd);                                                              \
> -	printf '%s\n' 'savedcmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:)
> -
> -# Re-generate module BTFs if either module's .ko or vmlinux changed
>  %.ko: %.o %.mod.o scripts/module.lds $(vmlinux) FORCE
> -	+$(call if_changed_except,ld_ko_o,vmlinux)
> -ifdef vmlinux
> -	+$(if $(newer-prereqs),$(call cmd,btf_ko))
> -endif
> +	+$(call if_changed,ld_ko_o)
>  
>  targets += $(modules:%.o=%.ko) $(modules:%.o=%.mod.o)
>  
> -- 
> 2.40.1
> 
>
Andrii Nakryiko Oct. 19, 2023, 10:54 p.m. UTC | #3
On Thu, Oct 19, 2023 at 1:15 AM Jiri Olsa <olsajiri@gmail.com> wrote:
>
> On Thu, Oct 19, 2023 at 12:19:50AM +0900, Masahiro Yamada wrote:
> > newer_prereqs_except and if_changed_except are ugly hacks of the
> > newer-prereqs and if_changed in scripts/Kbuild.include.
> >
> > Remove.
> >
> > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > ---
> >
> > Changes in v2:
> >   - Fix if_changed_except to if_changed
> >
> >  scripts/Makefile.modfinal | 25 ++++++-------------------
> >  1 file changed, 6 insertions(+), 19 deletions(-)
> >
> > diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> > index 9fd7a26e4fe9..fc07854bb7b9 100644
> > --- a/scripts/Makefile.modfinal
> > +++ b/scripts/Makefile.modfinal
> > @@ -19,6 +19,9 @@ vmlinux :=
> >  ifdef CONFIG_DEBUG_INFO_BTF_MODULES
> >  ifneq ($(wildcard vmlinux),)
> >  vmlinux := vmlinux
> > +cmd_btf = ; \
> > +     LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> > +     $(RESOLVE_BTFIDS) -b vmlinux $@
> >  else
> >  $(warning Skipping BTF generation due to unavailability of vmlinux)
> >  endif
> > @@ -41,27 +44,11 @@ quiet_cmd_ld_ko_o = LD [M]  $@
> >        cmd_ld_ko_o +=                                                 \
> >       $(LD) -r $(KBUILD_LDFLAGS)                                      \
> >               $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)              \
> > -             -T scripts/module.lds -o $@ $(filter %.o, $^)
> > +             -T scripts/module.lds -o $@ $(filter %.o, $^)           \
> > +     $(cmd_btf)
> >
> > -quiet_cmd_btf_ko = BTF [M] $@
>
> nit not sure it's intentional but we no longer display 'BTF [M] ...ko' lines,
> I don't mind not displaying that, but we should mention that in changelog
>

Thanks for spotting this! I think those messages are useful and
important to keep. Masahiro, is it possible to preserve them?


> jirka
>
> > -      cmd_btf_ko =                                                   \
> > -             LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> > -             $(RESOLVE_BTFIDS) -b vmlinux $@
> > -
> > -# Same as newer-prereqs, but allows to exclude specified extra dependencies
> > -newer_prereqs_except = $(filter-out $(PHONY) $(1),$?)
> > -
> > -# Same as if_changed, but allows to exclude specified extra dependencies
> > -if_changed_except = $(if $(call newer_prereqs_except,$(2))$(cmd-check),      \
> > -     $(cmd);                                                              \
> > -     printf '%s\n' 'savedcmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:)
> > -
> > -# Re-generate module BTFs if either module's .ko or vmlinux changed
> >  %.ko: %.o %.mod.o scripts/module.lds $(vmlinux) FORCE
> > -     +$(call if_changed_except,ld_ko_o,vmlinux)
> > -ifdef vmlinux
> > -     +$(if $(newer-prereqs),$(call cmd,btf_ko))
> > -endif
> > +     +$(call if_changed,ld_ko_o)
> >
> >  targets += $(modules:%.o=%.ko) $(modules:%.o=%.mod.o)
> >
> > --
> > 2.40.1
> >
> >
>
Masahiro Yamada Oct. 20, 2023, 7:03 a.m. UTC | #4
On Fri, Oct 20, 2023 at 7:55 AM Andrii Nakryiko
<andrii.nakryiko@gmail.com> wrote:
>
> On Thu, Oct 19, 2023 at 1:15 AM Jiri Olsa <olsajiri@gmail.com> wrote:
> >
> > On Thu, Oct 19, 2023 at 12:19:50AM +0900, Masahiro Yamada wrote:
> > > newer_prereqs_except and if_changed_except are ugly hacks of the
> > > newer-prereqs and if_changed in scripts/Kbuild.include.
> > >
> > > Remove.
> > >
> > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > > ---
> > >
> > > Changes in v2:
> > >   - Fix if_changed_except to if_changed
> > >
> > >  scripts/Makefile.modfinal | 25 ++++++-------------------
> > >  1 file changed, 6 insertions(+), 19 deletions(-)
> > >
> > > diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> > > index 9fd7a26e4fe9..fc07854bb7b9 100644
> > > --- a/scripts/Makefile.modfinal
> > > +++ b/scripts/Makefile.modfinal
> > > @@ -19,6 +19,9 @@ vmlinux :=
> > >  ifdef CONFIG_DEBUG_INFO_BTF_MODULES
> > >  ifneq ($(wildcard vmlinux),)
> > >  vmlinux := vmlinux
> > > +cmd_btf = ; \
> > > +     LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> > > +     $(RESOLVE_BTFIDS) -b vmlinux $@
> > >  else
> > >  $(warning Skipping BTF generation due to unavailability of vmlinux)
> > >  endif
> > > @@ -41,27 +44,11 @@ quiet_cmd_ld_ko_o = LD [M]  $@
> > >        cmd_ld_ko_o +=                                                 \
> > >       $(LD) -r $(KBUILD_LDFLAGS)                                      \
> > >               $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)              \
> > > -             -T scripts/module.lds -o $@ $(filter %.o, $^)
> > > +             -T scripts/module.lds -o $@ $(filter %.o, $^)           \
> > > +     $(cmd_btf)
> > >
> > > -quiet_cmd_btf_ko = BTF [M] $@
> >
> > nit not sure it's intentional but we no longer display 'BTF [M] ...ko' lines,
> > I don't mind not displaying that, but we should mention that in changelog
> >
>
> Thanks for spotting this! I think those messages are useful and
> important to keep. Masahiro, is it possible to preserve them?



No, I do not think so.

Your code is wrong.


To clarify this is a fix,
I will replace the commit as follows:




------------------->8----------------------
kbuild: detect btf command change for modules

Currently, the command change in cmd_btf_ko does not cause to rebuild
the modules because it is not passed to if_changed.

Pass everything to if_change so that the btf command is also recorded
in the .*.cmd files. This removes the hacky newer_prereqs_except and
if_changed_except macros too.
------------------->8----------------------




--
Best Regards

Masahiro Yamada
Andrii Nakryiko Oct. 20, 2023, 8:51 p.m. UTC | #5
On Fri, Oct 20, 2023 at 12:03 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
>
> On Fri, Oct 20, 2023 at 7:55 AM Andrii Nakryiko
> <andrii.nakryiko@gmail.com> wrote:
> >
> > On Thu, Oct 19, 2023 at 1:15 AM Jiri Olsa <olsajiri@gmail.com> wrote:
> > >
> > > On Thu, Oct 19, 2023 at 12:19:50AM +0900, Masahiro Yamada wrote:
> > > > newer_prereqs_except and if_changed_except are ugly hacks of the
> > > > newer-prereqs and if_changed in scripts/Kbuild.include.
> > > >
> > > > Remove.
> > > >
> > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > > > ---
> > > >
> > > > Changes in v2:
> > > >   - Fix if_changed_except to if_changed
> > > >
> > > >  scripts/Makefile.modfinal | 25 ++++++-------------------
> > > >  1 file changed, 6 insertions(+), 19 deletions(-)
> > > >
> > > > diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> > > > index 9fd7a26e4fe9..fc07854bb7b9 100644
> > > > --- a/scripts/Makefile.modfinal
> > > > +++ b/scripts/Makefile.modfinal
> > > > @@ -19,6 +19,9 @@ vmlinux :=
> > > >  ifdef CONFIG_DEBUG_INFO_BTF_MODULES
> > > >  ifneq ($(wildcard vmlinux),)
> > > >  vmlinux := vmlinux
> > > > +cmd_btf = ; \
> > > > +     LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> > > > +     $(RESOLVE_BTFIDS) -b vmlinux $@
> > > >  else
> > > >  $(warning Skipping BTF generation due to unavailability of vmlinux)
> > > >  endif
> > > > @@ -41,27 +44,11 @@ quiet_cmd_ld_ko_o = LD [M]  $@
> > > >        cmd_ld_ko_o +=                                                 \
> > > >       $(LD) -r $(KBUILD_LDFLAGS)                                      \
> > > >               $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)              \
> > > > -             -T scripts/module.lds -o $@ $(filter %.o, $^)
> > > > +             -T scripts/module.lds -o $@ $(filter %.o, $^)           \
> > > > +     $(cmd_btf)
> > > >
> > > > -quiet_cmd_btf_ko = BTF [M] $@
> > >
> > > nit not sure it's intentional but we no longer display 'BTF [M] ...ko' lines,
> > > I don't mind not displaying that, but we should mention that in changelog
> > >
> >
> > Thanks for spotting this! I think those messages are useful and
> > important to keep. Masahiro, is it possible to preserve them?
>
>
>
> No, I do not think so.
>

That's too bad, I think it's a useful one.

> Your code is wrong.
>

Could be, but note the comment you are removing:

# Re-generate module BTFs if either module's .ko or vmlinux changed

BTF has to be re-generated not just when module .ko is regenerated,
but also when the vmlinux image itself changes.

I don't see where this is done with your changes. Can you please point
it out explicitly?

>
> To clarify this is a fix,
> I will replace the commit as follows:
>
>
>
>
> ------------------->8----------------------
> kbuild: detect btf command change for modules
>
> Currently, the command change in cmd_btf_ko does not cause to rebuild
> the modules because it is not passed to if_changed.
>
> Pass everything to if_change so that the btf command is also recorded
> in the .*.cmd files. This removes the hacky newer_prereqs_except and
> if_changed_except macros too.
> ------------------->8----------------------
>
>
>
>
> --
> Best Regards
>
> Masahiro Yamada
Masahiro Yamada Oct. 21, 2023, 11:37 a.m. UTC | #6
On Sat, Oct 21, 2023 at 5:52 AM Andrii Nakryiko
<andrii.nakryiko@gmail.com> wrote:
>
> On Fri, Oct 20, 2023 at 12:03 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
> >
> > On Fri, Oct 20, 2023 at 7:55 AM Andrii Nakryiko
> > <andrii.nakryiko@gmail.com> wrote:
> > >
> > > On Thu, Oct 19, 2023 at 1:15 AM Jiri Olsa <olsajiri@gmail.com> wrote:
> > > >
> > > > On Thu, Oct 19, 2023 at 12:19:50AM +0900, Masahiro Yamada wrote:
> > > > > newer_prereqs_except and if_changed_except are ugly hacks of the
> > > > > newer-prereqs and if_changed in scripts/Kbuild.include.
> > > > >
> > > > > Remove.
> > > > >
> > > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > > > > ---
> > > > >
> > > > > Changes in v2:
> > > > >   - Fix if_changed_except to if_changed
> > > > >
> > > > >  scripts/Makefile.modfinal | 25 ++++++-------------------
> > > > >  1 file changed, 6 insertions(+), 19 deletions(-)
> > > > >
> > > > > diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> > > > > index 9fd7a26e4fe9..fc07854bb7b9 100644
> > > > > --- a/scripts/Makefile.modfinal
> > > > > +++ b/scripts/Makefile.modfinal
> > > > > @@ -19,6 +19,9 @@ vmlinux :=
> > > > >  ifdef CONFIG_DEBUG_INFO_BTF_MODULES
> > > > >  ifneq ($(wildcard vmlinux),)
> > > > >  vmlinux := vmlinux
> > > > > +cmd_btf = ; \
> > > > > +     LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> > > > > +     $(RESOLVE_BTFIDS) -b vmlinux $@
> > > > >  else
> > > > >  $(warning Skipping BTF generation due to unavailability of vmlinux)
> > > > >  endif
> > > > > @@ -41,27 +44,11 @@ quiet_cmd_ld_ko_o = LD [M]  $@
> > > > >        cmd_ld_ko_o +=                                                 \
> > > > >       $(LD) -r $(KBUILD_LDFLAGS)                                      \
> > > > >               $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)              \
> > > > > -             -T scripts/module.lds -o $@ $(filter %.o, $^)
> > > > > +             -T scripts/module.lds -o $@ $(filter %.o, $^)           \
> > > > > +     $(cmd_btf)
> > > > >
> > > > > -quiet_cmd_btf_ko = BTF [M] $@
> > > >
> > > > nit not sure it's intentional but we no longer display 'BTF [M] ...ko' lines,
> > > > I don't mind not displaying that, but we should mention that in changelog
> > > >
> > >
> > > Thanks for spotting this! I think those messages are useful and
> > > important to keep. Masahiro, is it possible to preserve them?
> >
> >
> >
> > No, I do not think so.
> >
>
> That's too bad, I think it's a useful one.



I prioritize that the code is correct.



>
> > Your code is wrong.
> >
>
> Could be, but note the comment you are removing:
>
> # Re-generate module BTFs if either module's .ko or vmlinux changed
>
> BTF has to be re-generated not just when module .ko is regenerated,
> but also when the vmlinux image itself changes.
>
> I don't see where this is done with your changes. Can you please point
> it out explicitly?



That is too obvious; %.ko depends on $(vmlinux).



%.ko: %.o %.mod.o scripts/module.lds $(vmlinux) FORCE
Andrii Nakryiko Oct. 21, 2023, 7:33 p.m. UTC | #7
On Sat, Oct 21, 2023 at 4:38 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
>
> On Sat, Oct 21, 2023 at 5:52 AM Andrii Nakryiko
> <andrii.nakryiko@gmail.com> wrote:
> >
> > On Fri, Oct 20, 2023 at 12:03 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > >
> > > On Fri, Oct 20, 2023 at 7:55 AM Andrii Nakryiko
> > > <andrii.nakryiko@gmail.com> wrote:
> > > >
> > > > On Thu, Oct 19, 2023 at 1:15 AM Jiri Olsa <olsajiri@gmail.com> wrote:
> > > > >
> > > > > On Thu, Oct 19, 2023 at 12:19:50AM +0900, Masahiro Yamada wrote:
> > > > > > newer_prereqs_except and if_changed_except are ugly hacks of the
> > > > > > newer-prereqs and if_changed in scripts/Kbuild.include.
> > > > > >
> > > > > > Remove.
> > > > > >
> > > > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > > > > > ---
> > > > > >
> > > > > > Changes in v2:
> > > > > >   - Fix if_changed_except to if_changed
> > > > > >
> > > > > >  scripts/Makefile.modfinal | 25 ++++++-------------------
> > > > > >  1 file changed, 6 insertions(+), 19 deletions(-)
> > > > > >
> > > > > > diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> > > > > > index 9fd7a26e4fe9..fc07854bb7b9 100644
> > > > > > --- a/scripts/Makefile.modfinal
> > > > > > +++ b/scripts/Makefile.modfinal
> > > > > > @@ -19,6 +19,9 @@ vmlinux :=
> > > > > >  ifdef CONFIG_DEBUG_INFO_BTF_MODULES
> > > > > >  ifneq ($(wildcard vmlinux),)
> > > > > >  vmlinux := vmlinux
> > > > > > +cmd_btf = ; \
> > > > > > +     LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> > > > > > +     $(RESOLVE_BTFIDS) -b vmlinux $@
> > > > > >  else
> > > > > >  $(warning Skipping BTF generation due to unavailability of vmlinux)
> > > > > >  endif
> > > > > > @@ -41,27 +44,11 @@ quiet_cmd_ld_ko_o = LD [M]  $@
> > > > > >        cmd_ld_ko_o +=                                                 \
> > > > > >       $(LD) -r $(KBUILD_LDFLAGS)                                      \
> > > > > >               $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)              \
> > > > > > -             -T scripts/module.lds -o $@ $(filter %.o, $^)
> > > > > > +             -T scripts/module.lds -o $@ $(filter %.o, $^)           \
> > > > > > +     $(cmd_btf)
> > > > > >
> > > > > > -quiet_cmd_btf_ko = BTF [M] $@
> > > > >
> > > > > nit not sure it's intentional but we no longer display 'BTF [M] ...ko' lines,
> > > > > I don't mind not displaying that, but we should mention that in changelog
> > > > >
> > > >
> > > > Thanks for spotting this! I think those messages are useful and
> > > > important to keep. Masahiro, is it possible to preserve them?
> > >
> > >
> > >
> > > No, I do not think so.
> > >
> >
> > That's too bad, I think it's a useful one.
>
>
>
> I prioritize that the code is correct.
>

Could you please also prioritize not regressing informativeness of a
build log? With your changes it's not clear now if BTF was generated
or not for a kernel module, while previously it was obvious and was
easy to spot if for some reason BTF was not generated. I'd like to
preserve this
property, thank you.

E.g, can we still have BTF generation as a separate command and do a
separate $(call if_changed,btf_ko)? Or something along those lines.
Would that work?

>
>
> >
> > > Your code is wrong.
> > >
> >
> > Could be, but note the comment you are removing:
> >
> > # Re-generate module BTFs if either module's .ko or vmlinux changed
> >
> > BTF has to be re-generated not just when module .ko is regenerated,
> > but also when the vmlinux image itself changes.
> >
> > I don't see where this is done with your changes. Can you please point
> > it out explicitly?
>
>
>
> That is too obvious; %.ko depends on $(vmlinux).

Thank you for your gracious answer. We used to not rebuild module's
.ko's when vmlinux didn't change (but we did regen BTFs), and that's
why I was confused. Now we forcefully recompile modules, which is a
change in behavior which would be nice to call out in the commit
message.


>
>
>
> %.ko: %.o %.mod.o scripts/module.lds $(vmlinux) FORCE
>
>
>
>
> --
> Best Regards
> Masahiro Yamada
Masahiro Yamada Oct. 22, 2023, 8:23 p.m. UTC | #8
On Sun, Oct 22, 2023 at 4:33 AM Andrii Nakryiko
<andrii.nakryiko@gmail.com> wrote:
>
> On Sat, Oct 21, 2023 at 4:38 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
> >
> > On Sat, Oct 21, 2023 at 5:52 AM Andrii Nakryiko
> > <andrii.nakryiko@gmail.com> wrote:
> > >
> > > On Fri, Oct 20, 2023 at 12:03 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > > >
> > > > On Fri, Oct 20, 2023 at 7:55 AM Andrii Nakryiko
> > > > <andrii.nakryiko@gmail.com> wrote:
> > > > >
> > > > > On Thu, Oct 19, 2023 at 1:15 AM Jiri Olsa <olsajiri@gmail.com> wrote:
> > > > > >
> > > > > > On Thu, Oct 19, 2023 at 12:19:50AM +0900, Masahiro Yamada wrote:
> > > > > > > newer_prereqs_except and if_changed_except are ugly hacks of the
> > > > > > > newer-prereqs and if_changed in scripts/Kbuild.include.
> > > > > > >
> > > > > > > Remove.
> > > > > > >
> > > > > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > > > > > > ---
> > > > > > >
> > > > > > > Changes in v2:
> > > > > > >   - Fix if_changed_except to if_changed
> > > > > > >
> > > > > > >  scripts/Makefile.modfinal | 25 ++++++-------------------
> > > > > > >  1 file changed, 6 insertions(+), 19 deletions(-)
> > > > > > >
> > > > > > > diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> > > > > > > index 9fd7a26e4fe9..fc07854bb7b9 100644
> > > > > > > --- a/scripts/Makefile.modfinal
> > > > > > > +++ b/scripts/Makefile.modfinal
> > > > > > > @@ -19,6 +19,9 @@ vmlinux :=
> > > > > > >  ifdef CONFIG_DEBUG_INFO_BTF_MODULES
> > > > > > >  ifneq ($(wildcard vmlinux),)
> > > > > > >  vmlinux := vmlinux
> > > > > > > +cmd_btf = ; \
> > > > > > > +     LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> > > > > > > +     $(RESOLVE_BTFIDS) -b vmlinux $@
> > > > > > >  else
> > > > > > >  $(warning Skipping BTF generation due to unavailability of vmlinux)
> > > > > > >  endif
> > > > > > > @@ -41,27 +44,11 @@ quiet_cmd_ld_ko_o = LD [M]  $@
> > > > > > >        cmd_ld_ko_o +=                                                 \
> > > > > > >       $(LD) -r $(KBUILD_LDFLAGS)                                      \
> > > > > > >               $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)              \
> > > > > > > -             -T scripts/module.lds -o $@ $(filter %.o, $^)
> > > > > > > +             -T scripts/module.lds -o $@ $(filter %.o, $^)           \
> > > > > > > +     $(cmd_btf)
> > > > > > >
> > > > > > > -quiet_cmd_btf_ko = BTF [M] $@
> > > > > >
> > > > > > nit not sure it's intentional but we no longer display 'BTF [M] ...ko' lines,
> > > > > > I don't mind not displaying that, but we should mention that in changelog
> > > > > >
> > > > >
> > > > > Thanks for spotting this! I think those messages are useful and
> > > > > important to keep. Masahiro, is it possible to preserve them?
> > > >
> > > >
> > > >
> > > > No, I do not think so.
> > > >
> > >
> > > That's too bad, I think it's a useful one.
> >
> >
> >
> > I prioritize that the code is correct.
> >
>
> Could you please also prioritize not regressing informativeness of a
> build log? With your changes it's not clear now if BTF was generated
> or not for a kernel module, while previously it was obvious and was
> easy to spot if for some reason BTF was not generated. I'd like to
> preserve this
> property, thank you.
>
> E.g, can we still have BTF generation as a separate command and do a
> separate $(call if_changed,btf_ko)? Or something along those lines.
> Would that work?

If we have an intermediate file (say, *.no-btf.ko),
it would make sense to have separate
$(call if_changed,ld_ko_o) and $(call if_changed,btf_ko).


           LD                 RESOLVE_BTFIDS
 *.mod.o  ------> *.no-btf.ko ------------> *.ko


When vmlinux is changed, only the second step would
be re-run, but that would require extra file copy.

Is this what you want to see?





>
> >
> >
> > >
> > > > Your code is wrong.
> > > >
> > >
> > > Could be, but note the comment you are removing:
> > >
> > > # Re-generate module BTFs if either module's .ko or vmlinux changed
> > >
> > > BTF has to be re-generated not just when module .ko is regenerated,
> > > but also when the vmlinux image itself changes.
> > >
> > > I don't see where this is done with your changes. Can you please point
> > > it out explicitly?
> >
> >
> >
> > That is too obvious; %.ko depends on $(vmlinux).
>
> Thank you for your gracious answer. We used to not rebuild module's
> .ko's when vmlinux didn't change (but we did regen BTFs), and that's
> why I was confused. Now we forcefully recompile modules, which is a
> change in behavior which would be nice to call out in the commit
> message.
>
>
> >
> >
> >
> > %.ko: %.o %.mod.o scripts/module.lds $(vmlinux) FORCE
> >
> >
> >
> >
> > --
> > Best Regards
> > Masahiro Yamada
Andrii Nakryiko Oct. 23, 2023, 3:19 a.m. UTC | #9
On Sun, Oct 22, 2023 at 1:24 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
>
> On Sun, Oct 22, 2023 at 4:33 AM Andrii Nakryiko
> <andrii.nakryiko@gmail.com> wrote:
> >
> > On Sat, Oct 21, 2023 at 4:38 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > >
> > > On Sat, Oct 21, 2023 at 5:52 AM Andrii Nakryiko
> > > <andrii.nakryiko@gmail.com> wrote:
> > > >
> > > > On Fri, Oct 20, 2023 at 12:03 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > > > >
> > > > > On Fri, Oct 20, 2023 at 7:55 AM Andrii Nakryiko
> > > > > <andrii.nakryiko@gmail.com> wrote:
> > > > > >
> > > > > > On Thu, Oct 19, 2023 at 1:15 AM Jiri Olsa <olsajiri@gmail.com> wrote:
> > > > > > >
> > > > > > > On Thu, Oct 19, 2023 at 12:19:50AM +0900, Masahiro Yamada wrote:
> > > > > > > > newer_prereqs_except and if_changed_except are ugly hacks of the
> > > > > > > > newer-prereqs and if_changed in scripts/Kbuild.include.
> > > > > > > >
> > > > > > > > Remove.
> > > > > > > >
> > > > > > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > > > > > > > ---
> > > > > > > >
> > > > > > > > Changes in v2:
> > > > > > > >   - Fix if_changed_except to if_changed
> > > > > > > >
> > > > > > > >  scripts/Makefile.modfinal | 25 ++++++-------------------
> > > > > > > >  1 file changed, 6 insertions(+), 19 deletions(-)
> > > > > > > >
> > > > > > > > diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> > > > > > > > index 9fd7a26e4fe9..fc07854bb7b9 100644
> > > > > > > > --- a/scripts/Makefile.modfinal
> > > > > > > > +++ b/scripts/Makefile.modfinal
> > > > > > > > @@ -19,6 +19,9 @@ vmlinux :=
> > > > > > > >  ifdef CONFIG_DEBUG_INFO_BTF_MODULES
> > > > > > > >  ifneq ($(wildcard vmlinux),)
> > > > > > > >  vmlinux := vmlinux
> > > > > > > > +cmd_btf = ; \
> > > > > > > > +     LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> > > > > > > > +     $(RESOLVE_BTFIDS) -b vmlinux $@
> > > > > > > >  else
> > > > > > > >  $(warning Skipping BTF generation due to unavailability of vmlinux)
> > > > > > > >  endif
> > > > > > > > @@ -41,27 +44,11 @@ quiet_cmd_ld_ko_o = LD [M]  $@
> > > > > > > >        cmd_ld_ko_o +=                                                 \
> > > > > > > >       $(LD) -r $(KBUILD_LDFLAGS)                                      \
> > > > > > > >               $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)              \
> > > > > > > > -             -T scripts/module.lds -o $@ $(filter %.o, $^)
> > > > > > > > +             -T scripts/module.lds -o $@ $(filter %.o, $^)           \
> > > > > > > > +     $(cmd_btf)
> > > > > > > >
> > > > > > > > -quiet_cmd_btf_ko = BTF [M] $@
> > > > > > >
> > > > > > > nit not sure it's intentional but we no longer display 'BTF [M] ...ko' lines,
> > > > > > > I don't mind not displaying that, but we should mention that in changelog
> > > > > > >
> > > > > >
> > > > > > Thanks for spotting this! I think those messages are useful and
> > > > > > important to keep. Masahiro, is it possible to preserve them?
> > > > >
> > > > >
> > > > >
> > > > > No, I do not think so.
> > > > >
> > > >
> > > > That's too bad, I think it's a useful one.
> > >
> > >
> > >
> > > I prioritize that the code is correct.
> > >
> >
> > Could you please also prioritize not regressing informativeness of a
> > build log? With your changes it's not clear now if BTF was generated
> > or not for a kernel module, while previously it was obvious and was
> > easy to spot if for some reason BTF was not generated. I'd like to
> > preserve this
> > property, thank you.
> >
> > E.g, can we still have BTF generation as a separate command and do a
> > separate $(call if_changed,btf_ko)? Or something along those lines.
> > Would that work?
>
> If we have an intermediate file (say, *.no-btf.ko),
> it would make sense to have separate
> $(call if_changed,ld_ko_o) and $(call if_changed,btf_ko).

Currently we don't generate intermediate files, but we do rewrite
original .ko file as a post-processing step.

And that rewriting step might not happen depending on Kconfig and
toolchain (e.g., too old pahole makes it impossible to generate kernel
module BTF). And that's why having a separate BTF [M] message in the
build log is important.

>
>
>            LD                 RESOLVE_BTFIDS
>  *.mod.o  ------> *.no-btf.ko ------------> *.ko
>
>
> When vmlinux is changed, only the second step would
> be re-run, but that would require extra file copy.

Today we rewrite .ko with a new .ko ELF file which gains a new ELF
section (.BTF), so we already pay this price when BTF is enabled (if
that's your concern).

>
> Is this what you want to see?

I don't have strong preferences for exact implementation, but what you
propose will work, I think. What I'd like to avoid is unnecessarily
relinking .ko files if all we need to do is regenerate BTF.

>
>
>
>
>
> >
> > >
> > >
> > > >
> > > > > Your code is wrong.
> > > > >
> > > >
> > > > Could be, but note the comment you are removing:
> > > >
> > > > # Re-generate module BTFs if either module's .ko or vmlinux changed
> > > >
> > > > BTF has to be re-generated not just when module .ko is regenerated,
> > > > but also when the vmlinux image itself changes.
> > > >
> > > > I don't see where this is done with your changes. Can you please point
> > > > it out explicitly?
> > >
> > >
> > >
> > > That is too obvious; %.ko depends on $(vmlinux).
> >
> > Thank you for your gracious answer. We used to not rebuild module's
> > .ko's when vmlinux didn't change (but we did regen BTFs), and that's
> > why I was confused. Now we forcefully recompile modules, which is a
> > change in behavior which would be nice to call out in the commit
> > message.
> >
> >
> > >
> > >
> > >
> > > %.ko: %.o %.mod.o scripts/module.lds $(vmlinux) FORCE
> > >
> > >
> > >
> > >
> > > --
> > > Best Regards
> > > Masahiro Yamada
>
>
>
> --
> Best Regards
> Masahiro Yamada
Masahiro Yamada Oct. 28, 2023, noon UTC | #10
On Mon, Oct 23, 2023 at 12:19 PM Andrii Nakryiko
<andrii.nakryiko@gmail.com> wrote:
>
> On Sun, Oct 22, 2023 at 1:24 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
> >
> > On Sun, Oct 22, 2023 at 4:33 AM Andrii Nakryiko
> > <andrii.nakryiko@gmail.com> wrote:
> > >
> > > On Sat, Oct 21, 2023 at 4:38 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > > >
> > > > On Sat, Oct 21, 2023 at 5:52 AM Andrii Nakryiko
> > > > <andrii.nakryiko@gmail.com> wrote:
> > > > >
> > > > > On Fri, Oct 20, 2023 at 12:03 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > > > > >
> > > > > > On Fri, Oct 20, 2023 at 7:55 AM Andrii Nakryiko
> > > > > > <andrii.nakryiko@gmail.com> wrote:
> > > > > > >
> > > > > > > On Thu, Oct 19, 2023 at 1:15 AM Jiri Olsa <olsajiri@gmail.com> wrote:
> > > > > > > >
> > > > > > > > On Thu, Oct 19, 2023 at 12:19:50AM +0900, Masahiro Yamada wrote:
> > > > > > > > > newer_prereqs_except and if_changed_except are ugly hacks of the
> > > > > > > > > newer-prereqs and if_changed in scripts/Kbuild.include.
> > > > > > > > >
> > > > > > > > > Remove.
> > > > > > > > >
> > > > > > > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > > > > > > > > ---
> > > > > > > > >
> > > > > > > > > Changes in v2:
> > > > > > > > >   - Fix if_changed_except to if_changed
> > > > > > > > >
> > > > > > > > >  scripts/Makefile.modfinal | 25 ++++++-------------------
> > > > > > > > >  1 file changed, 6 insertions(+), 19 deletions(-)
> > > > > > > > >
> > > > > > > > > diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> > > > > > > > > index 9fd7a26e4fe9..fc07854bb7b9 100644
> > > > > > > > > --- a/scripts/Makefile.modfinal
> > > > > > > > > +++ b/scripts/Makefile.modfinal
> > > > > > > > > @@ -19,6 +19,9 @@ vmlinux :=
> > > > > > > > >  ifdef CONFIG_DEBUG_INFO_BTF_MODULES
> > > > > > > > >  ifneq ($(wildcard vmlinux),)
> > > > > > > > >  vmlinux := vmlinux
> > > > > > > > > +cmd_btf = ; \
> > > > > > > > > +     LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> > > > > > > > > +     $(RESOLVE_BTFIDS) -b vmlinux $@
> > > > > > > > >  else
> > > > > > > > >  $(warning Skipping BTF generation due to unavailability of vmlinux)
> > > > > > > > >  endif
> > > > > > > > > @@ -41,27 +44,11 @@ quiet_cmd_ld_ko_o = LD [M]  $@
> > > > > > > > >        cmd_ld_ko_o +=                                                 \
> > > > > > > > >       $(LD) -r $(KBUILD_LDFLAGS)                                      \
> > > > > > > > >               $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)              \
> > > > > > > > > -             -T scripts/module.lds -o $@ $(filter %.o, $^)
> > > > > > > > > +             -T scripts/module.lds -o $@ $(filter %.o, $^)           \
> > > > > > > > > +     $(cmd_btf)
> > > > > > > > >
> > > > > > > > > -quiet_cmd_btf_ko = BTF [M] $@
> > > > > > > >
> > > > > > > > nit not sure it's intentional but we no longer display 'BTF [M] ...ko' lines,
> > > > > > > > I don't mind not displaying that, but we should mention that in changelog
> > > > > > > >
> > > > > > >
> > > > > > > Thanks for spotting this! I think those messages are useful and
> > > > > > > important to keep. Masahiro, is it possible to preserve them?
> > > > > >
> > > > > >
> > > > > >
> > > > > > No, I do not think so.
> > > > > >
> > > > >
> > > > > That's too bad, I think it's a useful one.
> > > >
> > > >
> > > >
> > > > I prioritize that the code is correct.
> > > >
> > >
> > > Could you please also prioritize not regressing informativeness of a
> > > build log? With your changes it's not clear now if BTF was generated
> > > or not for a kernel module, while previously it was obvious and was
> > > easy to spot if for some reason BTF was not generated. I'd like to
> > > preserve this
> > > property, thank you.
> > >
> > > E.g, can we still have BTF generation as a separate command and do a
> > > separate $(call if_changed,btf_ko)? Or something along those lines.
> > > Would that work?
> >
> > If we have an intermediate file (say, *.no-btf.ko),
> > it would make sense to have separate
> > $(call if_changed,ld_ko_o) and $(call if_changed,btf_ko).
>
> Currently we don't generate intermediate files, but we do rewrite
> original .ko file as a post-processing step.
>
> And that rewriting step might not happen depending on Kconfig and
> toolchain (e.g., too old pahole makes it impossible to generate kernel
> module BTF). And that's why having a separate BTF [M] message in the
> build log is important.
>
> >
> >
> >            LD                 RESOLVE_BTFIDS
> >  *.mod.o  ------> *.no-btf.ko ------------> *.ko
> >
> >
> > When vmlinux is changed, only the second step would
> > be re-run, but that would require extra file copy.
>
> Today we rewrite .ko with a new .ko ELF file which gains a new ELF
> section (.BTF), so we already pay this price when BTF is enabled (if
> that's your concern).
>
> >
> > Is this what you want to see?
>
> I don't have strong preferences for exact implementation, but what you
> propose will work, I think. What I'd like to avoid is unnecessarily
> relinking .ko files if all we need to do is regenerate BTF.




Is there any way to make pahole/resolve_btfids
take separate input and output files
instead of in-place modification?

Otherwise, explicit "cp *.no-btf.ko *.ko" would be needed.





--
Best Regards
Masahiro Yamada
Jiri Olsa Oct. 28, 2023, 1:36 p.m. UTC | #11
On Sat, Oct 28, 2023 at 09:00:11PM +0900, Masahiro Yamada wrote:
> On Mon, Oct 23, 2023 at 12:19 PM Andrii Nakryiko
> <andrii.nakryiko@gmail.com> wrote:
> >
> > On Sun, Oct 22, 2023 at 1:24 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > >
> > > On Sun, Oct 22, 2023 at 4:33 AM Andrii Nakryiko
> > > <andrii.nakryiko@gmail.com> wrote:
> > > >
> > > > On Sat, Oct 21, 2023 at 4:38 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > > > >
> > > > > On Sat, Oct 21, 2023 at 5:52 AM Andrii Nakryiko
> > > > > <andrii.nakryiko@gmail.com> wrote:
> > > > > >
> > > > > > On Fri, Oct 20, 2023 at 12:03 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > > > > > >
> > > > > > > On Fri, Oct 20, 2023 at 7:55 AM Andrii Nakryiko
> > > > > > > <andrii.nakryiko@gmail.com> wrote:
> > > > > > > >
> > > > > > > > On Thu, Oct 19, 2023 at 1:15 AM Jiri Olsa <olsajiri@gmail.com> wrote:
> > > > > > > > >
> > > > > > > > > On Thu, Oct 19, 2023 at 12:19:50AM +0900, Masahiro Yamada wrote:
> > > > > > > > > > newer_prereqs_except and if_changed_except are ugly hacks of the
> > > > > > > > > > newer-prereqs and if_changed in scripts/Kbuild.include.
> > > > > > > > > >
> > > > > > > > > > Remove.
> > > > > > > > > >
> > > > > > > > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > > > > > > > > > ---
> > > > > > > > > >
> > > > > > > > > > Changes in v2:
> > > > > > > > > >   - Fix if_changed_except to if_changed
> > > > > > > > > >
> > > > > > > > > >  scripts/Makefile.modfinal | 25 ++++++-------------------
> > > > > > > > > >  1 file changed, 6 insertions(+), 19 deletions(-)
> > > > > > > > > >
> > > > > > > > > > diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> > > > > > > > > > index 9fd7a26e4fe9..fc07854bb7b9 100644
> > > > > > > > > > --- a/scripts/Makefile.modfinal
> > > > > > > > > > +++ b/scripts/Makefile.modfinal
> > > > > > > > > > @@ -19,6 +19,9 @@ vmlinux :=
> > > > > > > > > >  ifdef CONFIG_DEBUG_INFO_BTF_MODULES
> > > > > > > > > >  ifneq ($(wildcard vmlinux),)
> > > > > > > > > >  vmlinux := vmlinux
> > > > > > > > > > +cmd_btf = ; \
> > > > > > > > > > +     LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> > > > > > > > > > +     $(RESOLVE_BTFIDS) -b vmlinux $@
> > > > > > > > > >  else
> > > > > > > > > >  $(warning Skipping BTF generation due to unavailability of vmlinux)
> > > > > > > > > >  endif
> > > > > > > > > > @@ -41,27 +44,11 @@ quiet_cmd_ld_ko_o = LD [M]  $@
> > > > > > > > > >        cmd_ld_ko_o +=                                                 \
> > > > > > > > > >       $(LD) -r $(KBUILD_LDFLAGS)                                      \
> > > > > > > > > >               $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)              \
> > > > > > > > > > -             -T scripts/module.lds -o $@ $(filter %.o, $^)
> > > > > > > > > > +             -T scripts/module.lds -o $@ $(filter %.o, $^)           \
> > > > > > > > > > +     $(cmd_btf)
> > > > > > > > > >
> > > > > > > > > > -quiet_cmd_btf_ko = BTF [M] $@
> > > > > > > > >
> > > > > > > > > nit not sure it's intentional but we no longer display 'BTF [M] ...ko' lines,
> > > > > > > > > I don't mind not displaying that, but we should mention that in changelog
> > > > > > > > >
> > > > > > > >
> > > > > > > > Thanks for spotting this! I think those messages are useful and
> > > > > > > > important to keep. Masahiro, is it possible to preserve them?
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > No, I do not think so.
> > > > > > >
> > > > > >
> > > > > > That's too bad, I think it's a useful one.
> > > > >
> > > > >
> > > > >
> > > > > I prioritize that the code is correct.
> > > > >
> > > >
> > > > Could you please also prioritize not regressing informativeness of a
> > > > build log? With your changes it's not clear now if BTF was generated
> > > > or not for a kernel module, while previously it was obvious and was
> > > > easy to spot if for some reason BTF was not generated. I'd like to
> > > > preserve this
> > > > property, thank you.
> > > >
> > > > E.g, can we still have BTF generation as a separate command and do a
> > > > separate $(call if_changed,btf_ko)? Or something along those lines.
> > > > Would that work?
> > >
> > > If we have an intermediate file (say, *.no-btf.ko),
> > > it would make sense to have separate
> > > $(call if_changed,ld_ko_o) and $(call if_changed,btf_ko).
> >
> > Currently we don't generate intermediate files, but we do rewrite
> > original .ko file as a post-processing step.
> >
> > And that rewriting step might not happen depending on Kconfig and
> > toolchain (e.g., too old pahole makes it impossible to generate kernel
> > module BTF). And that's why having a separate BTF [M] message in the
> > build log is important.
> >
> > >
> > >
> > >            LD                 RESOLVE_BTFIDS
> > >  *.mod.o  ------> *.no-btf.ko ------------> *.ko
> > >
> > >
> > > When vmlinux is changed, only the second step would
> > > be re-run, but that would require extra file copy.
> >
> > Today we rewrite .ko with a new .ko ELF file which gains a new ELF
> > section (.BTF), so we already pay this price when BTF is enabled (if
> > that's your concern).
> >
> > >
> > > Is this what you want to see?
> >
> > I don't have strong preferences for exact implementation, but what you
> > propose will work, I think. What I'd like to avoid is unnecessarily
> > relinking .ko files if all we need to do is regenerate BTF.
> 
> 
> 
> 
> Is there any way to make pahole/resolve_btfids
> take separate input and output files
> instead of in-place modification?

for pahole I think it'd be possible to get object file with .BTF section
and just link it with other module objects (it's done like that for vmlinux)
but I'm not sure which module linking stage this could happen

for resolve_btfids it's not possible at the moment, it just updates the
.BTF_ids section in the object file

I'm working on changing resolve_btfids to actually generate separate object
with .BTF_ids section, which is then link-ed with the final object, but will
take more time.. especially because I'm not sure where to place this logic
in module linking ;-)

jirka
Andrii Nakryiko Oct. 31, 2023, 6:44 p.m. UTC | #12
On Sat, Oct 28, 2023 at 6:36 AM Jiri Olsa <olsajiri@gmail.com> wrote:
>
> On Sat, Oct 28, 2023 at 09:00:11PM +0900, Masahiro Yamada wrote:
> > On Mon, Oct 23, 2023 at 12:19 PM Andrii Nakryiko
> > <andrii.nakryiko@gmail.com> wrote:
> > >
> > > On Sun, Oct 22, 2023 at 1:24 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > > >
> > > > On Sun, Oct 22, 2023 at 4:33 AM Andrii Nakryiko
> > > > <andrii.nakryiko@gmail.com> wrote:
> > > > >
> > > > > On Sat, Oct 21, 2023 at 4:38 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > > > > >
> > > > > > On Sat, Oct 21, 2023 at 5:52 AM Andrii Nakryiko
> > > > > > <andrii.nakryiko@gmail.com> wrote:
> > > > > > >
> > > > > > > On Fri, Oct 20, 2023 at 12:03 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
> > > > > > > >
> > > > > > > > On Fri, Oct 20, 2023 at 7:55 AM Andrii Nakryiko
> > > > > > > > <andrii.nakryiko@gmail.com> wrote:
> > > > > > > > >
> > > > > > > > > On Thu, Oct 19, 2023 at 1:15 AM Jiri Olsa <olsajiri@gmail.com> wrote:
> > > > > > > > > >
> > > > > > > > > > On Thu, Oct 19, 2023 at 12:19:50AM +0900, Masahiro Yamada wrote:
> > > > > > > > > > > newer_prereqs_except and if_changed_except are ugly hacks of the
> > > > > > > > > > > newer-prereqs and if_changed in scripts/Kbuild.include.
> > > > > > > > > > >
> > > > > > > > > > > Remove.
> > > > > > > > > > >
> > > > > > > > > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > > > > > > > > > > ---
> > > > > > > > > > >
> > > > > > > > > > > Changes in v2:
> > > > > > > > > > >   - Fix if_changed_except to if_changed
> > > > > > > > > > >
> > > > > > > > > > >  scripts/Makefile.modfinal | 25 ++++++-------------------
> > > > > > > > > > >  1 file changed, 6 insertions(+), 19 deletions(-)
> > > > > > > > > > >
> > > > > > > > > > > diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
> > > > > > > > > > > index 9fd7a26e4fe9..fc07854bb7b9 100644
> > > > > > > > > > > --- a/scripts/Makefile.modfinal
> > > > > > > > > > > +++ b/scripts/Makefile.modfinal
> > > > > > > > > > > @@ -19,6 +19,9 @@ vmlinux :=
> > > > > > > > > > >  ifdef CONFIG_DEBUG_INFO_BTF_MODULES
> > > > > > > > > > >  ifneq ($(wildcard vmlinux),)
> > > > > > > > > > >  vmlinux := vmlinux
> > > > > > > > > > > +cmd_btf = ; \
> > > > > > > > > > > +     LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
> > > > > > > > > > > +     $(RESOLVE_BTFIDS) -b vmlinux $@
> > > > > > > > > > >  else
> > > > > > > > > > >  $(warning Skipping BTF generation due to unavailability of vmlinux)
> > > > > > > > > > >  endif
> > > > > > > > > > > @@ -41,27 +44,11 @@ quiet_cmd_ld_ko_o = LD [M]  $@
> > > > > > > > > > >        cmd_ld_ko_o +=                                                 \
> > > > > > > > > > >       $(LD) -r $(KBUILD_LDFLAGS)                                      \
> > > > > > > > > > >               $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)              \
> > > > > > > > > > > -             -T scripts/module.lds -o $@ $(filter %.o, $^)
> > > > > > > > > > > +             -T scripts/module.lds -o $@ $(filter %.o, $^)           \
> > > > > > > > > > > +     $(cmd_btf)
> > > > > > > > > > >
> > > > > > > > > > > -quiet_cmd_btf_ko = BTF [M] $@
> > > > > > > > > >
> > > > > > > > > > nit not sure it's intentional but we no longer display 'BTF [M] ...ko' lines,
> > > > > > > > > > I don't mind not displaying that, but we should mention that in changelog
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > > Thanks for spotting this! I think those messages are useful and
> > > > > > > > > important to keep. Masahiro, is it possible to preserve them?
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > No, I do not think so.
> > > > > > > >
> > > > > > >
> > > > > > > That's too bad, I think it's a useful one.
> > > > > >
> > > > > >
> > > > > >
> > > > > > I prioritize that the code is correct.
> > > > > >
> > > > >
> > > > > Could you please also prioritize not regressing informativeness of a
> > > > > build log? With your changes it's not clear now if BTF was generated
> > > > > or not for a kernel module, while previously it was obvious and was
> > > > > easy to spot if for some reason BTF was not generated. I'd like to
> > > > > preserve this
> > > > > property, thank you.
> > > > >
> > > > > E.g, can we still have BTF generation as a separate command and do a
> > > > > separate $(call if_changed,btf_ko)? Or something along those lines.
> > > > > Would that work?
> > > >
> > > > If we have an intermediate file (say, *.no-btf.ko),
> > > > it would make sense to have separate
> > > > $(call if_changed,ld_ko_o) and $(call if_changed,btf_ko).
> > >
> > > Currently we don't generate intermediate files, but we do rewrite
> > > original .ko file as a post-processing step.
> > >
> > > And that rewriting step might not happen depending on Kconfig and
> > > toolchain (e.g., too old pahole makes it impossible to generate kernel
> > > module BTF). And that's why having a separate BTF [M] message in the
> > > build log is important.
> > >
> > > >
> > > >
> > > >            LD                 RESOLVE_BTFIDS
> > > >  *.mod.o  ------> *.no-btf.ko ------------> *.ko
> > > >
> > > >
> > > > When vmlinux is changed, only the second step would
> > > > be re-run, but that would require extra file copy.
> > >
> > > Today we rewrite .ko with a new .ko ELF file which gains a new ELF
> > > section (.BTF), so we already pay this price when BTF is enabled (if
> > > that's your concern).
> > >
> > > >
> > > > Is this what you want to see?
> > >
> > > I don't have strong preferences for exact implementation, but what you
> > > propose will work, I think. What I'd like to avoid is unnecessarily
> > > relinking .ko files if all we need to do is regenerate BTF.
> >
> >
> >
> >
> > Is there any way to make pahole/resolve_btfids
> > take separate input and output files
> > instead of in-place modification?
>
> for pahole I think it'd be possible to get object file with .BTF section
> and just link it with other module objects (it's done like that for vmlinux)
> but I'm not sure which module linking stage this could happen
>
> for resolve_btfids it's not possible at the moment, it just updates the
> .BTF_ids section in the object file
>
> I'm working on changing resolve_btfids to actually generate separate object
> with .BTF_ids section, which is then link-ed with the final object, but will
> take more time.. especially because I'm not sure where to place this logic
> in module linking ;-)

pahole also supports mode of generating BTF into a separate file
without modifying the original one. The option is called
--btf_encode_detached. It was added in v1.22 (currently the minimal
version is v1.16), though, so depending on whether we are willing to
bump the minimum pahole version, we might use that. That will allow us
to also simplify and clean up link-vmlinux.sh a bit, I think.

But I don't know if it's worth the trouble right now.


>
> jirka
diff mbox series

Patch

diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
index 9fd7a26e4fe9..fc07854bb7b9 100644
--- a/scripts/Makefile.modfinal
+++ b/scripts/Makefile.modfinal
@@ -19,6 +19,9 @@  vmlinux :=
 ifdef CONFIG_DEBUG_INFO_BTF_MODULES
 ifneq ($(wildcard vmlinux),)
 vmlinux := vmlinux
+cmd_btf = ; \
+	LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
+	$(RESOLVE_BTFIDS) -b vmlinux $@
 else
 $(warning Skipping BTF generation due to unavailability of vmlinux)
 endif
@@ -41,27 +44,11 @@  quiet_cmd_ld_ko_o = LD [M]  $@
       cmd_ld_ko_o +=							\
 	$(LD) -r $(KBUILD_LDFLAGS)					\
 		$(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)		\
-		-T scripts/module.lds -o $@ $(filter %.o, $^)
+		-T scripts/module.lds -o $@ $(filter %.o, $^)		\
+	$(cmd_btf)
 
-quiet_cmd_btf_ko = BTF [M] $@
-      cmd_btf_ko = 							\
-		LLVM_OBJCOPY="$(OBJCOPY)" $(PAHOLE) -J $(PAHOLE_FLAGS) --btf_base vmlinux $@; \
-		$(RESOLVE_BTFIDS) -b vmlinux $@
-
-# Same as newer-prereqs, but allows to exclude specified extra dependencies
-newer_prereqs_except = $(filter-out $(PHONY) $(1),$?)
-
-# Same as if_changed, but allows to exclude specified extra dependencies
-if_changed_except = $(if $(call newer_prereqs_except,$(2))$(cmd-check),      \
-	$(cmd);                                                              \
-	printf '%s\n' 'savedcmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:)
-
-# Re-generate module BTFs if either module's .ko or vmlinux changed
 %.ko: %.o %.mod.o scripts/module.lds $(vmlinux) FORCE
-	+$(call if_changed_except,ld_ko_o,vmlinux)
-ifdef vmlinux
-	+$(if $(newer-prereqs),$(call cmd,btf_ko))
-endif
+	+$(call if_changed,ld_ko_o)
 
 targets += $(modules:%.o=%.ko) $(modules:%.o=%.mod.o)