| Message ID | 20240127162309.1026549-2-masahiroy@kernel.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | MIPS: fix the "CPU type" choice structure | expand |
在 2024/1/27 16:23, Masahiro Yamada 写道: > Move the following entries out of the "CPU type" choice: > > - LOONGSON3_ENHANCEMENT > - CPU_LOONGSON3_WORKAROUNDS > - CPU_LOONGSON3_CPUCFG_EMULATION > > These entries cannot be selected from the choice because they depend on > CPU_LOONGSON64, which is also located in the same choice. > > In fact, Kconfig does not consider them as choice values because they > become children of CPU_LOOONGSON64 due to the automatic submenu creation > in menu_finalize(). > > However, it is hard to understand this behavior unless you are familiar > with the Kconfig internals. > > "choice" should contain only selectable entries. > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Thanks! > --- > > arch/mips/Kconfig | 76 +++++++++++++++++++++++------------------------ > 1 file changed, 38 insertions(+), 38 deletions(-) > > diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig > index 797ae590ebdb..a70b4f959fb1 100644 > --- a/arch/mips/Kconfig > +++ b/arch/mips/Kconfig > @@ -1269,44 +1269,6 @@ config CPU_LOONGSON64 > 3B1000, 3B1500, 3A2000, 3A3000 and 3A4000) processors. However, old > Loongson-2E/2F is not covered here and will be removed in future. > > -config LOONGSON3_ENHANCEMENT > - bool "New Loongson-3 CPU Enhancements" > - default n > - depends on CPU_LOONGSON64 > - help > - New Loongson-3 cores (since Loongson-3A R2, as opposed to Loongson-3A > - R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as > - FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPr2 ASE, User > - Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer), > - Fast TLB refill support, etc. > - > - This option enable those enhancements which are not probed at run > - time. If you want a generic kernel to run on all Loongson 3 machines, > - please say 'N' here. If you want a high-performance kernel to run on > - new Loongson-3 machines only, please say 'Y' here. > - > -config CPU_LOONGSON3_WORKAROUNDS > - bool "Loongson-3 LLSC Workarounds" > - default y if SMP > - depends on CPU_LOONGSON64 > - help > - Loongson-3 processors have the llsc issues which require workarounds. > - Without workarounds the system may hang unexpectedly. > - > - Say Y, unless you know what you are doing. > - > -config CPU_LOONGSON3_CPUCFG_EMULATION > - bool "Emulate the CPUCFG instruction on older Loongson cores" > - default y > - depends on CPU_LOONGSON64 > - help > - Loongson-3A R4 and newer have the CPUCFG instruction available for > - userland to query CPU capabilities, much like CPUID on x86. This > - option provides emulation of the instruction on older Loongson > - cores, back to Loongson-3A1000. > - > - If unsure, please say Y. > - > config CPU_LOONGSON2E > bool "Loongson 2E" > depends on SYS_HAS_CPU_LOONGSON2E > @@ -1644,6 +1606,44 @@ config CPU_BMIPS > > endchoice > > +config LOONGSON3_ENHANCEMENT > + bool "New Loongson-3 CPU Enhancements" > + default n > + depends on CPU_LOONGSON64 > + help > + New Loongson-3 cores (since Loongson-3A R2, as opposed to Loongson-3A > + R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as > + FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPr2 ASE, User > + Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer), > + Fast TLB refill support, etc. > + > + This option enable those enhancements which are not probed at run > + time. If you want a generic kernel to run on all Loongson 3 machines, > + please say 'N' here. If you want a high-performance kernel to run on > + new Loongson-3 machines only, please say 'Y' here. > + > +config CPU_LOONGSON3_WORKAROUNDS > + bool "Loongson-3 LLSC Workarounds" > + default y if SMP > + depends on CPU_LOONGSON64 > + help > + Loongson-3 processors have the llsc issues which require workarounds. > + Without workarounds the system may hang unexpectedly. > + > + Say Y, unless you know what you are doing. > + > +config CPU_LOONGSON3_CPUCFG_EMULATION > + bool "Emulate the CPUCFG instruction on older Loongson cores" > + default y > + depends on CPU_LOONGSON64 > + help > + Loongson-3A R4 and newer have the CPUCFG instruction available for > + userland to query CPU capabilities, much like CPUID on x86. This > + option provides emulation of the instruction on older Loongson > + cores, back to Loongson-3A1000. > + > + If unsure, please say Y. > + > config CPU_MIPS32_3_5_FEATURES > bool "MIPS32 Release 3.5 Features" > depends on SYS_HAS_CPU_MIPS32_R3_5
On Sun, Jan 28, 2024 at 01:23:09AM +0900, Masahiro Yamada wrote: > Move the following entries out of the "CPU type" choice: > > - LOONGSON3_ENHANCEMENT > - CPU_LOONGSON3_WORKAROUNDS > - CPU_LOONGSON3_CPUCFG_EMULATION > > These entries cannot be selected from the choice because they depend on > CPU_LOONGSON64, which is also located in the same choice. > > In fact, Kconfig does not consider them as choice values because they > become children of CPU_LOOONGSON64 due to the automatic submenu creation > in menu_finalize(). > > However, it is hard to understand this behavior unless you are familiar > with the Kconfig internals. > > "choice" should contain only selectable entries. > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> > --- > > arch/mips/Kconfig | 76 +++++++++++++++++++++++------------------------ > 1 file changed, 38 insertions(+), 38 deletions(-) applied to mips-next. Thomas.
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 797ae590ebdb..a70b4f959fb1 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1269,44 +1269,6 @@ config CPU_LOONGSON64 3B1000, 3B1500, 3A2000, 3A3000 and 3A4000) processors. However, old Loongson-2E/2F is not covered here and will be removed in future. -config LOONGSON3_ENHANCEMENT - bool "New Loongson-3 CPU Enhancements" - default n - depends on CPU_LOONGSON64 - help - New Loongson-3 cores (since Loongson-3A R2, as opposed to Loongson-3A - R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as - FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPr2 ASE, User - Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer), - Fast TLB refill support, etc. - - This option enable those enhancements which are not probed at run - time. If you want a generic kernel to run on all Loongson 3 machines, - please say 'N' here. If you want a high-performance kernel to run on - new Loongson-3 machines only, please say 'Y' here. - -config CPU_LOONGSON3_WORKAROUNDS - bool "Loongson-3 LLSC Workarounds" - default y if SMP - depends on CPU_LOONGSON64 - help - Loongson-3 processors have the llsc issues which require workarounds. - Without workarounds the system may hang unexpectedly. - - Say Y, unless you know what you are doing. - -config CPU_LOONGSON3_CPUCFG_EMULATION - bool "Emulate the CPUCFG instruction on older Loongson cores" - default y - depends on CPU_LOONGSON64 - help - Loongson-3A R4 and newer have the CPUCFG instruction available for - userland to query CPU capabilities, much like CPUID on x86. This - option provides emulation of the instruction on older Loongson - cores, back to Loongson-3A1000. - - If unsure, please say Y. - config CPU_LOONGSON2E bool "Loongson 2E" depends on SYS_HAS_CPU_LOONGSON2E @@ -1644,6 +1606,44 @@ config CPU_BMIPS endchoice +config LOONGSON3_ENHANCEMENT + bool "New Loongson-3 CPU Enhancements" + default n + depends on CPU_LOONGSON64 + help + New Loongson-3 cores (since Loongson-3A R2, as opposed to Loongson-3A + R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as + FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPr2 ASE, User + Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer), + Fast TLB refill support, etc. + + This option enable those enhancements which are not probed at run + time. If you want a generic kernel to run on all Loongson 3 machines, + please say 'N' here. If you want a high-performance kernel to run on + new Loongson-3 machines only, please say 'Y' here. + +config CPU_LOONGSON3_WORKAROUNDS + bool "Loongson-3 LLSC Workarounds" + default y if SMP + depends on CPU_LOONGSON64 + help + Loongson-3 processors have the llsc issues which require workarounds. + Without workarounds the system may hang unexpectedly. + + Say Y, unless you know what you are doing. + +config CPU_LOONGSON3_CPUCFG_EMULATION + bool "Emulate the CPUCFG instruction on older Loongson cores" + default y + depends on CPU_LOONGSON64 + help + Loongson-3A R4 and newer have the CPUCFG instruction available for + userland to query CPU capabilities, much like CPUID on x86. This + option provides emulation of the instruction on older Loongson + cores, back to Loongson-3A1000. + + If unsure, please say Y. + config CPU_MIPS32_3_5_FEATURES bool "MIPS32 Release 3.5 Features" depends on SYS_HAS_CPU_MIPS32_R3_5
Move the following entries out of the "CPU type" choice: - LOONGSON3_ENHANCEMENT - CPU_LOONGSON3_WORKAROUNDS - CPU_LOONGSON3_CPUCFG_EMULATION These entries cannot be selected from the choice because they depend on CPU_LOONGSON64, which is also located in the same choice. In fact, Kconfig does not consider them as choice values because they become children of CPU_LOOONGSON64 due to the automatic submenu creation in menu_finalize(). However, it is hard to understand this behavior unless you are familiar with the Kconfig internals. "choice" should contain only selectable entries. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> --- arch/mips/Kconfig | 76 +++++++++++++++++++++++------------------------ 1 file changed, 38 insertions(+), 38 deletions(-)