diff mbox series

[v5,7/7] Add Propeller configuration for kernel build

Message ID 20241023224409.201771-8-xur@google.com (mailing list archive)
State New
Headers show
Series Add AutoFDO and Propeller support for Clang build | expand

Commit Message

Rong Xu Oct. 23, 2024, 10:44 p.m. UTC
Add the build support for using Clang's Propeller optimizer. Like
AutoFDO, Propeller uses hardware sampling to gather information
about the frequency of execution of different code paths within a
binary. This information is then used to guide the compiler's
optimization decisions, resulting in a more efficient binary.

The support requires a Clang compiler LLVM 19 or later, and the
create_llvm_prof tool
(https://github.com/google/autofdo/releases/tag/v0.30.1). This
commit is limited to x86 platforms that support PMU features
like LBR on Intel machines and AMD Zen3 BRS.

Here is an example workflow for building an AutoFDO+Propeller
optimized kernel:

1) Build the kernel on the host machine, with AutoFDO and Propeller
   build config
      CONFIG_AUTOFDO_CLANG=y
      CONFIG_PROPELLER_CLANG=y
   then
      $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile>

“<autofdo_profile>” is the profile collected when doing a non-Propeller
AutoFDO build. This step builds a kernel that has the same optimization
level as AutoFDO, plus a metadata section that records basic block
information. This kernel image runs as fast as an AutoFDO optimized
kernel.

2) Install the kernel on test/production machines.

3) Run the load tests. The '-c' option in perf specifies the sample
   event period. We suggest using a suitable prime number,
   like 500009, for this purpose.
   For Intel platforms:
      $ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \
        -o <perf_file> -- <loadtest>
   For AMD platforms:
      The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2
      # To see if Zen3 support LBR:
      $ cat proc/cpuinfo | grep " brs"
      # To see if Zen4 support LBR:
      $ cat proc/cpuinfo | grep amd_lbr_v2
      # If the result is yes, then collect the profile using:
      $ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \
        -N -b -c <count> -o <perf_file> -- <loadtest>

4) (Optional) Download the raw perf file to the host machine.

5) Generate Propeller profile:
   $ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \
     --format=propeller --propeller_output_module_name \
     --out=<propeller_profile_prefix>_cc_profile.txt \
     --propeller_symorder=<propeller_profile_prefix>_ld_profile.txt

   “create_llvm_prof” is the profile conversion tool, and a prebuilt
   binary for linux can be found on
   https://github.com/google/autofdo/releases/tag/v0.30.1 (can also build
   from source).

   "<propeller_profile_prefix>" can be something like
   "/home/user/dir/any_string".

   This command generates a pair of Propeller profiles:
   "<propeller_profile_prefix>_cc_profile.txt" and
   "<propeller_profile_prefix>_ld_profile.txt".

6) Rebuild the kernel using the AutoFDO and Propeller profile files.
      CONFIG_AUTOFDO_CLANG=y
      CONFIG_PROPELLER_CLANG=y
   and
      $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> \
        CLANG_PROPELLER_PROFILE_PREFIX=<propeller_profile_prefix>

Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
---
 Documentation/dev-tools/index.rst     |   1 +
 Documentation/dev-tools/propeller.rst | 162 ++++++++++++++++++++++++++
 MAINTAINERS                           |   7 ++
 Makefile                              |   1 +
 arch/Kconfig                          |  19 +++
 arch/x86/Kconfig                      |   1 +
 arch/x86/kernel/vmlinux.lds.S         |   4 +
 include/asm-generic/vmlinux.lds.h     |   6 +-
 scripts/Makefile.lib                  |  10 ++
 scripts/Makefile.propeller            |  28 +++++
 tools/objtool/check.c                 |   1 +
 11 files changed, 237 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/dev-tools/propeller.rst
 create mode 100644 scripts/Makefile.propeller
diff mbox series

Patch

diff --git a/Documentation/dev-tools/index.rst b/Documentation/dev-tools/index.rst
index 6945644f7008..3c0ac08b2709 100644
--- a/Documentation/dev-tools/index.rst
+++ b/Documentation/dev-tools/index.rst
@@ -35,6 +35,7 @@  Documentation/dev-tools/testing-overview.rst
    checkuapi
    gpio-sloppy-logic-analyzer
    autofdo
+   propeller
 
 
 .. only::  subproject and html
diff --git a/Documentation/dev-tools/propeller.rst b/Documentation/dev-tools/propeller.rst
new file mode 100644
index 000000000000..92195958e3db
--- /dev/null
+++ b/Documentation/dev-tools/propeller.rst
@@ -0,0 +1,162 @@ 
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+Using Propeller with the Linux kernel
+=====================================
+
+This enables Propeller build support for the kernel when using Clang
+compiler. Propeller is a profile-guided optimization (PGO) method used
+to optimize binary executables. Like AutoFDO, it utilizes hardware
+sampling to gather information about the frequency of execution of
+different code paths within a binary. Unlike AutoFDO, this information
+is then used right before linking phase to optimize (among others)
+block layout within and across functions.
+
+A few important notes about adopting Propeller optimization:
+
+#. Although it can be used as a standalone optimization step, it is
+   strongly recommended to apply Propeller on top of AutoFDO,
+   AutoFDO+ThinLTO or Instrument FDO. The rest of this document
+   assumes this paradigm.
+
+#. Propeller uses another round of profiling on top of
+   AutoFDO/AutoFDO+ThinLTO/iFDO. The whole build process involves
+   "build-afdo - train-afdo - build-propeller - train-propeller -
+   build-optimized".
+
+#. Propeller requires LLVM 19 release or later for Clang/Clang++
+   and the linker(ld.lld).
+
+#. In addition to LLVM toolchain, Propeller requires a profiling
+   conversion tool: https://github.com/google/autofdo with a release
+   after v0.30.1: https://github.com/google/autofdo/releases/tag/v0.30.1.
+
+The Propeller optimization process involves the following steps:
+
+#. Initial building: Build the AutoFDO or AutoFDO+ThinLTO binary as
+   you would normally do, but with a set of compile-time / link-time
+   flags, so that a special metadata section is created within the
+   kernel binary. The special section is only intend to be used by the
+   profiling tool, it is not part of the runtime image, nor does it
+   change kernel run time text sections.
+
+#. Profiling: The above kernel is then run with a representative
+   workload to gather execution frequency data. This data is collected
+   using hardware sampling, via perf. Propeller is most effective on
+   platforms supporting advanced PMU features like LBR on Intel
+   machines. This step is the same as profiling the kernel for AutoFDO
+   (the exact perf parameters can be different).
+
+#. Propeller profile generation: Perf output file is converted to a
+   pair of Propeller profiles via an offline tool.
+
+#. Optimized build: Build the AutoFDO or AutoFDO+ThinLTO optimized
+   binary as you would normally do, but with a compile-time /
+   link-time flag to pick up the Propeller compile time and link time
+   profiles. This build step uses 3 profiles - the AutoFDO profile,
+   the Propeller compile-time profile and the Propeller link-time
+   profile.
+
+#. Deployment: The optimized kernel binary is deployed and used
+   in production environments, providing improved performance
+   and reduced latency.
+
+Preparation
+===========
+
+Configure the kernel with::
+
+   CONFIG_AUTOFDO_CLANG=y
+   CONFIG_PROPELLER_CLANG=y
+
+Customization
+=============
+
+The default CONFIG_PROPELLER_CLANG setting covers kernel space objects
+for Propeller builds. One can, however, enable or disable Propeller build
+for individual files and directories by adding a line similar to the
+following to the respective kernel Makefile:
+
+- For enabling a single file (e.g. foo.o)::
+
+   PROPELLER_PROFILE_foo.o := y
+
+- For enabling all files in one directory::
+
+   PROPELLER_PROFILE := y
+
+- For disabling one file::
+
+   PROPELLER_PROFILE_foo.o := n
+
+- For disabling all files in one directory::
+
+   PROPELLER__PROFILE := n
+
+
+Workflow
+========
+
+Here is an example workflow for building an AutoFDO+Propeller kernel:
+
+1) Assuming an AutoFDO profile is already collected following
+   instructions in the AutoFDO document, build the kernel on the host
+   machine, with AutoFDO and Propeller build configs ::
+
+      CONFIG_AUTOFDO_CLANG=y
+      CONFIG_PROPELLER_CLANG=y
+
+   and ::
+
+      $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo-profile-name>
+
+2) Install the kernel on the test machine.
+
+3) Run the load tests. The '-c' option in perf specifies the sample
+   event period. We suggest using a suitable prime number, like 500009,
+   for this purpose.
+
+   - For Intel platforms::
+
+      $ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> -o <perf_file> -- <loadtest>
+
+   - For AMD platforms::
+
+      $ perf record --pfm-event RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a -N -b -c <count> -o <perf_file> -- <loadtest>
+
+   Note you can repeat the above steps to collect multiple <perf_file>s.
+
+4) (Optional) Download the raw perf file(s) to the host machine.
+
+5) Use the create_llvm_prof tool (https://github.com/google/autofdo) to
+   generate Propeller profile. ::
+
+      $ create_llvm_prof --binary=<vmlinux> --profile=<perf_file>
+                         --format=propeller --propeller_output_module_name
+                         --out=<propeller_profile_prefix>_cc_profile.txt
+                         --propeller_symorder=<propeller_profile_prefix>_ld_profile.txt
+
+   "<propeller_profile_prefix>" can be something like "/home/user/dir/any_string".
+
+   This command generates a pair of Propeller profiles:
+   "<propeller_profile_prefix>_cc_profile.txt" and
+   "<propeller_profile_prefix>_ld_profile.txt".
+
+   If there are more than 1 perf_file collected in the previous step,
+   you can create a temp list file "<perf_file_list>" with each line
+   containing one perf file name and run::
+
+      $ create_llvm_prof --binary=<vmlinux> --profile=@<perf_file_list>
+                         --format=propeller --propeller_output_module_name
+                         --out=<propeller_profile_prefix>_cc_profile.txt
+                         --propeller_symorder=<propeller_profile_prefix>_ld_profile.txt
+
+6) Rebuild the kernel using the AutoFDO and Propeller
+   profiles. ::
+
+      CONFIG_AUTOFDO_CLANG=y
+      CONFIG_PROPELLER_CLANG=y
+
+   and ::
+
+      $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<profile_file> CLANG_PROPELLER_PROFILE_PREFIX=<propeller_profile_prefix>
diff --git a/MAINTAINERS b/MAINTAINERS
index 1b8db863031f..f4cc6dd6c4d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18560,6 +18560,13 @@  S:	Maintained
 F:	include/linux/psi*
 F:	kernel/sched/psi.c
 
+PROPELLER BUILD
+M:	Rong Xu <xur@google.com>
+M:	Han Shen <shenhan@google.com>
+S:	Supported
+F:	Documentation/dev-tools/propeller.rst
+F:	scripts/Makefile.propeller
+
 PRINTK
 M:	Petr Mladek <pmladek@suse.com>
 R:	Steven Rostedt <rostedt@goodmis.org>
diff --git a/Makefile b/Makefile
index bbb6ec68f5dc..2d2f688c21c6 100644
--- a/Makefile
+++ b/Makefile
@@ -1019,6 +1019,7 @@  include-$(CONFIG_UBSAN)		+= scripts/Makefile.ubsan
 include-$(CONFIG_KCOV)		+= scripts/Makefile.kcov
 include-$(CONFIG_RANDSTRUCT)	+= scripts/Makefile.randstruct
 include-$(CONFIG_AUTOFDO_CLANG)	+= scripts/Makefile.autofdo
+include-$(CONFIG_PROPELLER_CLANG)	+= scripts/Makefile.propeller
 include-$(CONFIG_GCC_PLUGINS)	+= scripts/Makefile.gcc-plugins
 
 include $(addprefix $(srctree)/, $(include-y))
diff --git a/arch/Kconfig b/arch/Kconfig
index 5e9604960cbb..ea7aed39196b 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -831,6 +831,25 @@  config AUTOFDO_CLANG
 
 	  If unsure, say N.
 
+config ARCH_SUPPORTS_PROPELLER_CLANG
+	bool
+
+config PROPELLER_CLANG
+	bool "Enable Clang's Propeller build"
+	depends on ARCH_SUPPORTS_PROPELLER_CLANG
+	depends on CC_IS_CLANG && CLANG_VERSION >= 190000
+	help
+	  This option enables Clang’s Propeller build. When the Propeller
+	  profiles is specified in variable CLANG_PROPELLER_PROFILE_PREFIX
+	  during the build process, Clang uses the profiles to optimize
+	  the kernel.
+
+	  If no profile is specified, Propeller options are still passed
+	  to Clang to facilitate the collection of perf data for creating
+	  the Propeller profiles in subsequent builds.
+
+	  If unsure, say N.
+
 config ARCH_SUPPORTS_CFI_CLANG
 	bool
 	help
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 503a0268155a..da47164bfddc 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -127,6 +127,7 @@  config X86
 	select ARCH_SUPPORTS_LTO_CLANG_THIN
 	select ARCH_SUPPORTS_RT
 	select ARCH_SUPPORTS_AUTOFDO_CLANG
+	select ARCH_SUPPORTS_PROPELLER_CLANG    if X86_64
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF		if X86_CMPXCHG64
 	select ARCH_USE_MEMTEST
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 6726be89b7a6..7ecc21c569be 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -442,6 +442,10 @@  SECTIONS
 
 	STABS_DEBUG
 	DWARF_DEBUG
+#ifdef CONFIG_PROPELLER_CLANG
+	.llvm_bb_addr_map : { *(.llvm_bb_addr_map) }
+#endif
+
 	ELF_DETAILS
 
 	DISCARDS
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 8a0bb3946cf0..c995474e4c64 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -95,14 +95,14 @@ 
  * With LTO_CLANG, the linker also splits sections by default, so we need
  * these macros to combine the sections during the final link.
  *
- * With AUTOFDO_CLANG, by default, the linker splits text sections and
- * regroups functions into subsections.
+ * With AUTOFDO_CLANG and PROPELLER_CLANG, by default, the linker splits
+ * text sections and regroups functions into subsections.
  *
  * RODATA_MAIN is not used because existing code already defines .rodata.x
  * sections to be brought in with rodata.
  */
 #if defined(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION) || defined(CONFIG_LTO_CLANG) || \
-defined(CONFIG_AUTOFDO_CLANG)
+defined(CONFIG_AUTOFDO_CLANG) || defined(CONFIG_PROPELLER_CLANG)
 #define TEXT_MAIN .text .text.[0-9a-zA-Z_]*
 #else
 #define TEXT_MAIN .text
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 2d0942c1a027..e7859ad90224 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -201,6 +201,16 @@  _c_flags += $(if $(patsubst n%,, \
 	$(CFLAGS_AUTOFDO_CLANG))
 endif
 
+#
+# Enable Propeller build flags except some files or directories we don't want to
+# enable (depends on variables AUTOFDO_PROPELLER_obj.o and PROPELLER_PROFILE).
+#
+ifdef CONFIG_PROPELLER_CLANG
+_c_flags += $(if $(patsubst n%,, \
+	$(AUTOFDO_PROFILE_$(target-stem).o)$(AUTOFDO_PROFILE)$(PROPELLER_PROFILE))$(is-kernel-object), \
+	$(CFLAGS_PROPELLER_CLANG))
+endif
+
 # $(src) for including checkin headers from generated source files
 # $(obj) for including generated headers from checkin source files
 ifeq ($(KBUILD_EXTMOD),)
diff --git a/scripts/Makefile.propeller b/scripts/Makefile.propeller
new file mode 100644
index 000000000000..344190717e47
--- /dev/null
+++ b/scripts/Makefile.propeller
@@ -0,0 +1,28 @@ 
+# SPDX-License-Identifier: GPL-2.0
+
+# Enable available and selected Clang Propeller features.
+ifdef CLANG_PROPELLER_PROFILE_PREFIX
+  CFLAGS_PROPELLER_CLANG := -fbasic-block-sections=list=$(CLANG_PROPELLER_PROFILE_PREFIX)_cc_profile.txt -ffunction-sections
+  KBUILD_LDFLAGS += --symbol-ordering-file=$(CLANG_PROPELLER_PROFILE_PREFIX)_ld_profile.txt --no-warn-symbol-ordering
+else
+  CFLAGS_PROPELLER_CLANG := -fbasic-block-sections=labels
+endif
+
+# Propeller requires debug information to embed module names in the profiles.
+# If CONFIG_DEBUG_INFO is not enabled, set -gmlt option. Skip this for AutoFDO,
+# as the option should already be set.
+ifndef CONFIG_DEBUG_INFO
+  ifndef CONFIG_AUTOFDO_CLANG
+    CFLAGS_PROPELLER_CLANG += -gmlt
+  endif
+endif
+
+ifdef CONFIG_LTO_CLANG_THIN
+  ifdef CLANG_PROPELLER_PROFILE_PREFIX
+    KBUILD_LDFLAGS += --lto-basic-block-sections=$(CLANG_PROPELLER_PROFILE_PREFIX)_cc_profile.txt
+  else
+    KBUILD_LDFLAGS += --lto-basic-block-sections=labels
+  endif
+endif
+
+export CFLAGS_PROPELLER_CLANG
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 4c5229991e1e..05a0fb4a3d1a 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -4558,6 +4558,7 @@  static int validate_ibt(struct objtool_file *file)
 		    !strcmp(sec->name, "__mcount_loc")			||
 		    !strcmp(sec->name, ".kcfi_traps")			||
 		    !strcmp(sec->name, ".llvm.call-graph-profile")	||
+		    !strcmp(sec->name, ".llvm_bb_addr_map")		||
 		    strstr(sec->name, "__patchable_function_entries"))
 			continue;