@@ -1,9 +1,8 @@
#!/bin/sh
# description: Snapshot and tracing setting
+# requires: snapshot
# flags: instance
-[ ! -f snapshot ] && exit_unsupported
-
echo "Set tracing off"
echo 0 > tracing_on
@@ -1,10 +1,9 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: trace_pipe and trace_marker
+# requires: trace_marker
# flags: instance
-[ ! -f trace_marker ] && exit_unsupported
-
echo "test input 1" > trace_marker
: "trace interface never consume the ring buffer"
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Test ftrace direct functions against kprobes
+# requires: kprobe_events
rmmod ftrace-direct ||:
if ! modprobe ftrace-direct ; then
@@ -8,11 +9,6 @@ if ! modprobe ftrace-direct ; then
exit_unresolved;
fi
-if [ ! -f kprobe_events ]; then
- echo "No kprobe_events file -please build CONFIG_KPROBE_EVENTS"
- exit_unsupported;
-fi
-
echo "Let the module run a little"
sleep 1
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Generic dynamic event - add/remove kprobe events
-
-[ -f dynamic_events ] || exit_unsupported
+# requires: dynamic_events
grep -q "place: \[<module>:\]<symbol>" README || exit_unsupported
grep -q "place (kretprobe): \[<module>:\]<symbol>" README || exit_unsupported
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Generic dynamic event - add/remove synthetic events
-
-[ -f dynamic_events ] || exit_unsupported
+# requires: dynamic_events
grep -q "s:\[synthetic/\]" README || exit_unsupported
@@ -1,17 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Generic dynamic event - selective clear (compatibility)
-
-[ -f dynamic_events ] || exit_unsupported
+# requires: dynamic_events kprobe_events synthetic_events
grep -q "place: \[<module>:\]<symbol>" README || exit_unsupported
grep -q "place (kretprobe): \[<module>:\]<symbol>" README || exit_unsupported
grep -q "s:\[synthetic/\]" README || exit_unsupported
-[ -f synthetic_events ] || exit_unsupported
-[ -f kprobe_events ] || exit_unsupported
-
echo 0 > events/enable
echo > dynamic_events
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Generic dynamic event - generic clear event
-
-[ -f dynamic_events ] || exit_unsupported
+# requires: dynamic_events
grep -q "place: \[<module>:\]<symbol>" README || exit_unsupported
grep -q "place (kretprobe): \[<module>:\]<symbol>" README || exit_unsupported
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event tracing - enable/disable with event level files
+# requires: set_event events/sched
# flags: instance
do_reset() {
@@ -13,11 +14,6 @@ fail() { #msg
exit_fail
}
-if [ ! -f set_event -o ! -d events/sched ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
echo 'sched:sched_switch' > set_event
yield
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event tracing - restricts events based on pid notrace filtering
+# requires: set_event events/sched set_event_pid set_event_notrace_pid
# flags: instance
do_reset() {
@@ -56,16 +57,6 @@ enable_events() {
echo 1 > tracing_on
}
-if [ ! -f set_event -o ! -d events/sched ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f set_event_pid -o ! -f set_event_notrace_pid ]; then
- echo "event pid notrace filtering is not supported"
- exit_unsupported
-fi
-
echo 0 > options/event-fork
do_reset
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event tracing - restricts events based on pid
+# requires: set_event set_event_pid events/sched
# flags: instance
do_reset() {
@@ -16,16 +17,6 @@ fail() { #msg
exit_fail
}
-if [ ! -f set_event -o ! -d events/sched ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f set_event_pid ]; then
- echo "event pid filtering is not supported"
- exit_unsupported
-fi
-
echo 0 > options/event-fork
echo 1 > events/sched/sched_switch/enable
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event tracing - enable/disable with subsystem level files
+# requires: set_event events/sched/enable
# flags: instance
do_reset() {
@@ -13,11 +14,6 @@ fail() { #msg
exit_fail
}
-if [ ! -f set_event -o ! -d events/sched ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
echo 'sched:*' > set_event
yield
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event tracing - enable/disable with top level files
+# requires: available_events set_event events/enable
do_reset() {
echo > set_event
@@ -12,11 +13,6 @@ fail() { #msg
exit_fail
}
-if [ ! -f available_events -o ! -f set_event -o ! -d events ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
echo '*:*' > set_event
yield
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: ftrace - function graph filters with stack tracer
+# requires: stack_trace
# Make sure that function graph filtering works, and is not
# affected by other tracers enabled (like stack tracer)
@@ -37,12 +38,6 @@ fi
echo function_graph > current_tracer
-if [ ! -f stack_trace ]; then
- echo "Stack tracer not configured"
- do_reset
- exit_unsupported;
-fi
-
echo "Now testing with stack tracer"
echo 1 > /proc/sys/kernel/stack_tracer_enabled
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: ftrace - function pid notrace filters
+# requires: set_ftrace_notrace_pid
# flags: instance
# Make sure that function pid matching filter with notrace works.
@@ -10,11 +11,6 @@ if ! grep -q function available_tracers; then
exit_unsupported
fi
-if [ ! -f set_ftrace_notrace_pid ]; then
- echo "set_ftrace_notrace_pid not found? Is function tracer not set?"
- exit_unsupported
-fi
-
check_filter_file set_ftrace_filter
do_function_fork=1
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: ftrace - function pid filters
+# requires: set_ftrace_pid
# flags: instance
# Make sure that function pid matching filter works.
@@ -11,11 +12,6 @@ if ! grep -q function available_tracers; then
exit_unsupported
fi
-if [ ! -f set_ftrace_pid ]; then
- echo "set_ftrace_pid not found? Is function tracer not set?"
- exit_unsupported
-fi
-
check_filter_file set_ftrace_filter
do_function_fork=1
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: ftrace - function profiling
-
-[ ! -f function_profile_enabled ] && exit_unsupported
+# requires: function_profile_enabled
: "Enable function profile"
echo 1 > function_profile_enabled
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: ftrace - function profiler with function tracing
+# requires: function_profile_enabled
# There was a bug after a rewrite of the ftrace infrastructure that
# caused the function_profiler not to be able to run with the function
@@ -20,11 +21,6 @@ fi
check_filter_file set_ftrace_filter
-if [ ! -f function_profile_enabled ]; then
- echo "function_profile_enabled not found, function profiling enabled?"
- exit_unsupported
-fi
-
fail() { # mesg
echo $1
exit_fail
@@ -1,13 +1,9 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: ftrace - Max stack tracer
+# requires: stack_trace
# Test the basic function of max-stack usage tracing
-if [ ! -f stack_trace ]; then
- echo "Max stack tracer is not supported - please make CONFIG_STACK_TRACER=y"
- exit_unsupported
-fi
-
check_filter_file stack_trace_filter
echo > stack_trace_filter
@@ -1,21 +1,15 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: ftrace - test tracing error log support
+# event tracing is currently the only ftrace tracer that uses the
+# tracing error_log, hence this check
+# requires: set_event error_log
fail() { #msg
echo $1
exit_fail
}
-# event tracing is currently the only ftrace tracer that uses the
-# tracing error_log, hence this check
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-[ -f error_log ] || exit_unsupported
-
ftrace_errlog_check 'event filter parse error' '((sig >= 10 && sig < 15) || dsig ^== 17) && comm != bash' 'events/signal/signal_generate/filter'
exit 0
@@ -1,11 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Test creation and deletion of trace instances while setting an event
-
-if [ ! -d instances ] ; then
- echo "no instance directory with this kernel"
- exit_unsupported;
-fi
+# requires: instances
fail() { # mesg
rmdir foo 2>/dev/null
@@ -1,11 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Test creation and deletion of trace instances
-
-if [ ! -d instances ] ; then
- echo "no instance directory with this kernel"
- exit_unsupported;
-fi
+# requires: instances
fail() { # mesg
rmdir x y z 2>/dev/null
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe dynamic event - adding and removing
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
echo p:myevent _do_fork > kprobe_events
grep myevent kprobe_events
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe dynamic event - busy event check
-
-[ -f kprobe_events ] || exit_unsupported
+# requires: kprobe_events
echo p:myevent _do_fork > kprobe_events
test -d events/kprobes/myevent
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe dynamic event with arguments
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
echo 'p:testprobe _do_fork $stack $stack0 +0($stack)' > kprobe_events
grep testprobe kprobe_events | grep -q 'arg1=\$stack arg2=\$stack0 arg3=+0(\$stack)'
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe event with comm arguments
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
grep -A1 "fetcharg:" README | grep -q "\$comm" || exit_unsupported # this is too old
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe event string type argument
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
case `uname -m` in
x86_64)
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe event symbol argument
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
SYMBOL="linux_proc_banner"
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe event argument syntax
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobes event arguments with types
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe event user-memory access
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
grep -q '\$arg<N>' README || exit_unsupported # depends on arch
grep -A10 "fetcharg:" README | grep -q 'ustring' || exit_unsupported
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe event auto/manual naming
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
:;: "Add an event on function without name" ;:
@@ -1,8 +1,8 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe dynamic event with function tracer
+# requires: kprobe_events
-[ -f kprobe_events ] || exit_unsupported # this is configurable
grep "function" available_tracers || exit_unsupported # this is configurable
check_filter_file set_ftrace_filter
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe dynamic event - probing module
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
rmmod trace-printk ||:
if ! modprobe trace-printk ; then
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Create/delete multiprobe on kprobe event
-
-[ -f kprobe_events ] || exit_unsupported
+# requires: kprobe_events
grep -q "Create/append/" README || exit_unsupported
@@ -1,10 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe event parser error log check
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
-
-[ -f error_log ] || exit_unsupported
+# requires: kprobe_events error_log
check_error() { # command-with-error-pos-by-^
ftrace_errlog_check 'trace_kprobe' "$1" 'kprobe_events'
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kretprobe dynamic event with arguments
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
# Add new kretprobe event
echo 'r:testprobe2 _do_fork $retval' > kprobe_events
@@ -1,8 +1,8 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kretprobe dynamic event with maxactive
+# requires: kprobe_events
-[ -f kprobe_events ] || exit_unsupported # this is configurable
grep -q 'r\[maxactive\]' README || exit_unsupported # this is older version
# Test if we successfully reject unknown messages
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Register/unregister many kprobe events
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
# ftrace fentry skip size depends on the machine architecture.
# Currently HAVE_KPROBES_ON_FTRACE defined on x86 and powerpc64le
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe events - probe points
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
TARGET_FUNC=tracefs_create_dir
@@ -1,8 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe dynamic event - adding and removing
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
! grep -q 'myevent' kprobe_profile
echo p:myevent _do_fork > kprobe_events
@@ -1,10 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Uprobe event parser error log check
-
-[ -f uprobe_events ] || exit_unsupported # this is configurable
-
-[ -f error_log ] || exit_unsupported
+# requires: uprobe_events error_log
check_error() { # command-with-error-pos-by-^
ftrace_errlog_check 'trace_uprobe' "$1" 'uprobe_events'
@@ -1,22 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test inter-event histogram trigger expected fail actions
+# requires: set_event snapshot
fail() { #msg
echo $1
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f snapshot ]; then
- echo "snapshot is not supported"
- exit_unsupported
-fi
-
grep -q "snapshot()" README || exit_unsupported # version issue
echo "Test expected snapshot action failure"
@@ -1,27 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test field variable support
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist
fail() { #msg
echo $1
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
- echo "synthetic event is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
echo "Test field variable support"
echo 'wakeup_latency u64 lat; pid_t pid; int prio; char comm[16]' > synthetic_events
@@ -1,27 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test inter-event combined histogram trigger
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist
fail() { #msg
echo $1
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
- echo "synthetic event is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
echo "Test create synthetic event"
echo 'waking_latency u64 lat pid_t pid' > synthetic_events
@@ -1,27 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test multiple actions on hist trigger
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist
fail() { #msg
echo $1
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
- echo "synthetic event is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
echo "Test multiple actions on hist trigger"
echo 'wakeup_latency u64 lat; pid_t pid' >> synthetic_events
TRIGGER1=events/sched/sched_wakeup/trigger
@@ -1,17 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test inter-event histogram trigger onchange action
+# requires: set_event
fail() { #msg
echo $1
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
grep -q "onchange(var)" README || exit_unsupported # version issue
echo "Test onchange action"
@@ -1,27 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test inter-event histogram trigger onmatch action
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist
fail() { #msg
echo $1
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
- echo "synthetic event is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
echo "Test create synthetic event"
echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events
@@ -1,27 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test inter-event histogram trigger onmatch-onmax action
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist
fail() { #msg
echo $1
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
- echo "synthetic event is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
echo "Test create synthetic event"
echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events
@@ -1,27 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test inter-event histogram trigger onmax action
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist
fail() { #msg
echo $1
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
- echo "synthetic event is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
echo "Test create synthetic event"
echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events
@@ -1,27 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test inter-event histogram trigger snapshot action
+# requires: set_event snapshot events/sched/sched_process_fork/hist
fail() { #msg
echo $1
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
-if [ ! -f snapshot ]; then
- echo "snapshot is not supported"
- exit_unsupported
-fi
-
grep -q "onchange(var)" README || exit_unsupported # version issue
grep -q "snapshot()" README || exit_unsupported # version issue
@@ -1,22 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test synthetic event create remove
+# requires: set_event synthetic_events
fail() { #msg
echo $1
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
- echo "synthetic event is not supported"
- exit_unsupported
-fi
-
echo "Test create synthetic event"
echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test synthetic_events syntax parser
+# requires: set_event synthetic_events
do_reset() {
reset_trigger
@@ -14,16 +15,6 @@ fail() { #msg
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
- echo "synthetic event is not supported"
- exit_unsupported
-fi
-
reset_tracer
do_reset
@@ -1,27 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test inter-event histogram trigger trace action
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist
fail() { #msg
echo $1
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
- echo "synthetic event is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
grep -q "trace(<synthetic_event>" README || exit_unsupported # version issue
echo "Test create synthetic event"
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test event enable/disable trigger
+# requires: set_event events/sched/sched_process_fork/trigger
# flags: instance
fail() { #msg
@@ -8,16 +9,6 @@ fail() { #msg
exit_fail
}
-if [ ! -f set_event -o ! -d events/sched ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
- echo "event trigger is not supported"
- exit_unsupported
-fi
-
FEATURE=`grep enable_event events/sched/sched_process_fork/trigger`
if [ -z "$FEATURE" ]; then
echo "event enable/disable trigger is not supported"
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test trigger filter
+# requires: set_event events/sched/sched_process_fork/trigger
# flags: instance
fail() { #msg
@@ -8,16 +9,6 @@ fail() { #msg
exit_fail
}
-if [ ! -f set_event -o ! -d events/sched ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
- echo "event trigger is not supported"
- exit_unsupported
-fi
-
echo "Test trigger filter"
echo 1 > tracing_on
echo 'traceoff if child_pid == 0' > events/sched/sched_process_fork/trigger
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test histogram modifiers
+# requires: set_event events/sched/sched_process_fork/trigger events/sched/sched_process_fork/hist
# flags: instance
fail() { #msg
@@ -8,21 +9,6 @@ fail() { #msg
exit_fail
}
-if [ ! -f set_event -o ! -d events/sched ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
- echo "event trigger is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
echo "Test histogram with execname modifier"
echo 'hist:keys=common_pid.execname' > events/sched/sched_process_fork/trigger
@@ -1,23 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test histogram parser errors
-
-if [ ! -f set_event -o ! -d events/kmem ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/kmem/kmalloc/trigger ]; then
- echo "event trigger is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/kmem/kmalloc/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
-[ -f error_log ] || exit_unsupported
+# requires: set_event events/kmem/kmalloc/trigger events/kmem/kmalloc/hist error_log
check_error() { # command-with-error-pos-by-^
ftrace_errlog_check 'hist:kmem:kmalloc' "$1" 'events/kmem/kmalloc/trigger'
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test histogram trigger
+# requires: set_event events/sched/sched_process_fork/trigger events/sched/sched_process_fork/hist
# flags: instance
fail() { #msg
@@ -8,21 +9,6 @@ fail() { #msg
exit_fail
}
-if [ ! -f set_event -o ! -d events/sched ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
- echo "event trigger is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
echo "Test histogram basic tigger"
echo 'hist:keys=parent_pid:vals=child_pid' > events/sched/sched_process_fork/trigger
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test multiple histogram triggers
+# requires: set_event events/sched/sched_process_fork/trigger events/sched/sched_process_fork/hist
# flags: instance
fail() { #msg
@@ -8,21 +9,6 @@ fail() { #msg
exit_fail
}
-if [ ! -f set_event -o ! -d events/sched ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
- echo "event trigger is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
echo "Test histogram multiple triggers"
echo 'hist:keys=parent_pid:vals=child_pid' > events/sched/sched_process_fork/trigger
@@ -1,27 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test snapshot-trigger
+# requires: set_event events/sched/sched_process_fork/trigger snapshot
fail() { #msg
echo $1
exit_fail
}
-if [ ! -f set_event -o ! -d events/sched ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
- echo "event trigger is not supported"
- exit_unsupported
-fi
-
-if [ ! -f snapshot ]; then
- echo "snapshot is not supported"
- exit_unsupported
-fi
-
FEATURE=`grep snapshot events/sched/sched_process_fork/trigger`
if [ -z "$FEATURE" ]; then
echo "snapshot trigger is not supported"
@@ -1,22 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test stacktrace-trigger
+# requires: set_event events/sched/sched_process_fork/trigger
fail() { #msg
echo $1
exit_fail
}
-if [ ! -f set_event -o ! -d events/sched ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
- echo "event trigger is not supported"
- exit_unsupported
-fi
-
FEATURE=`grep stacktrace events/sched/sched_process_fork/trigger`
if [ -z "$FEATURE" ]; then
echo "stacktrace trigger is not supported"
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: trace_marker trigger - test histogram trigger
+# requires: set_event events/ftrace/print/trigger events/ftrace/print/hist
# flags: instance
fail() { #msg
@@ -8,26 +9,6 @@ fail() { #msg
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -d events/ftrace/print ]; then
- echo "event trace_marker is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/ftrace/print/trigger ]; then
- echo "event trigger is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/ftrace/print/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
echo "Test histogram trace_marker tigger"
echo 'hist:keys=common_pid' > events/ftrace/print/trigger
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: trace_marker trigger - test snapshot trigger
+# requires: set_event snapshot events/ftrace/print/trigger
# flags: instance
fail() { #msg
@@ -8,26 +9,6 @@ fail() { #msg
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f snapshot ]; then
- echo "snapshot is not supported"
- exit_unsupported
-fi
-
-if [ ! -d events/ftrace/print ]; then
- echo "event trace_marker is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/ftrace/print/trigger ]; then
- echo "event trigger is not supported"
- exit_unsupported
-fi
-
test_trace() {
file=$1
x=$2
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: trace_marker trigger - test histogram with synthetic event against kernel event
+# requires: set_event synthetic_events events/sched/sched_waking events/ftrace/print/trigger events/ftrace/print/hist
# flags:
fail() { #msg
@@ -8,36 +9,6 @@ fail() { #msg
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
- echo "synthetic events not supported"
- exit_unsupported
-fi
-
-if [ ! -d events/ftrace/print ]; then
- echo "event trace_marker is not supported"
- exit_unsupported
-fi
-
-if [ ! -d events/sched/sched_waking ]; then
- echo "event sched_waking is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/ftrace/print/trigger ]; then
- echo "event trigger is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/ftrace/print/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
echo "Test histogram kernel event to trace_marker latency histogram trigger"
echo 'latency u64 lat' > synthetic_events
@@ -1,6 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: trace_marker trigger - test histogram with synthetic event
+# requires: set_event synthetic_events events/ftrace/print/trigger events/ftrace/print/hist
# flags:
fail() { #msg
@@ -8,31 +9,6 @@ fail() { #msg
exit_fail
}
-if [ ! -f set_event ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
- echo "synthetic events not supported"
- exit_unsupported
-fi
-
-if [ ! -d events/ftrace/print ]; then
- echo "event trace_marker is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/ftrace/print/trigger ]; then
- echo "event trigger is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/ftrace/print/hist ]; then
- echo "hist trigger is not supported"
- exit_unsupported
-fi
-
echo "Test histogram trace_marker to trace_marker latency histogram trigger"
echo 'latency u64 lat' > synthetic_events
@@ -1,22 +1,13 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test traceon/off trigger
+# requires: set_event events/sched/sched_process_fork/trigger
fail() { #msg
echo $1
exit_fail
}
-if [ ! -f set_event -o ! -d events/sched ]; then
- echo "event tracing is not supported"
- exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
- echo "event trigger is not supported"
- exit_unsupported
-fi
-
echo "Test traceoff trigger"
echo 1 > tracing_on
echo 'traceoff' > events/sched/sched_process_fork/trigger