diff mbox series

[2/2] selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config

Message ID 20181127031218.24419-3-dan.rue@linaro.org (mailing list archive)
State Accepted
Commit c6e2b86ffb342aacb73d363ca8b0dd7d3ee24931
Headers show
Series selftests: firmware: fw_filesystem fix for busybox | expand

Commit Message

Dan Rue Nov. 27, 2018, 3:12 a.m. UTC
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y is required for fw_fallback.sh.
Without it, fw_fallback.sh fails with 'usermode helper disabled so
ignoring test'. Enable the config in selftest so that it gets built by
default.

Signed-off-by: Dan Rue <dan.rue@linaro.org>
---
 tools/testing/selftests/firmware/config | 1 +
 1 file changed, 1 insertion(+)

Comments

Kees Cook Nov. 27, 2018, 5:56 p.m. UTC | #1
On Mon, Nov 26, 2018 at 7:12 PM, Dan Rue <dan.rue@linaro.org> wrote:
> CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y is required for fw_fallback.sh.
> Without it, fw_fallback.sh fails with 'usermode helper disabled so
> ignoring test'. Enable the config in selftest so that it gets built by
> default.
>
> Signed-off-by: Dan Rue <dan.rue@linaro.org>

Acked-by: Kees Cook <keescook@chromium.org>

-Kees

> ---
>  tools/testing/selftests/firmware/config | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/tools/testing/selftests/firmware/config b/tools/testing/selftests/firmware/config
> index bf634dda0720..913a25a4a32b 100644
> --- a/tools/testing/selftests/firmware/config
> +++ b/tools/testing/selftests/firmware/config
> @@ -1,5 +1,6 @@
>  CONFIG_TEST_FIRMWARE=y
>  CONFIG_FW_LOADER=y
>  CONFIG_FW_LOADER_USER_HELPER=y
> +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
>  CONFIG_IKCONFIG=y
>  CONFIG_IKCONFIG_PROC=y
> --
> 2.19.1
>
Luis Chamberlain Nov. 30, 2018, 2:31 a.m. UTC | #2
On Mon, Nov 26, 2018 at 09:12:16PM -0600, Dan Rue wrote:
> CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y is required for fw_fallback.sh.
> Without it, fw_fallback.sh fails with 'usermode helper disabled so
> ignoring test'. Enable the config in selftest so that it gets built by
> default.
> 
> Signed-off-by: Dan Rue <dan.rue@linaro.org>
> ---
>  tools/testing/selftests/firmware/config | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/tools/testing/selftests/firmware/config b/tools/testing/selftests/firmware/config
> index bf634dda0720..913a25a4a32b 100644
> --- a/tools/testing/selftests/firmware/config
> +++ b/tools/testing/selftests/firmware/config
> @@ -1,5 +1,6 @@
>  CONFIG_TEST_FIRMWARE=y
>  CONFIG_FW_LOADER=y
>  CONFIG_FW_LOADER_USER_HELPER=y
> +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
>  CONFIG_IKCONFIG=y
>  CONFIG_IKCONFIG_PROC=y

NACK -- the point of the changes was to *allow* us to mimic such
configuration through a proc sysctl knob.

You aren forcing CONFIG_FW_LOADER_USER_HELPER_FALLBACK but just having
CONFIG_FW_LOADER_USER_HELPER suffices to emulate the_FALLBACK
functionality.

The issue here seems to be that *all* tests fail once a configuration is
found which is not suitable a tests. With the shiny new proc sysctls we
can test all 3 kernel configurations in one shot. Since we test 3
different kernel configurations naturally some of these won't have the
features needed, so that failure should be treated as non-fatal to allow
the chain of other tests to continue.

This issue was a regression due to commit a6a9be9270c87 ("selftests:
firmware: return Kselftest Skip code for skipped tests") by Shuah for
the verify_reqs(). We need to treat this as a non-fatal / don't skip
return value.

The following would fix this chaining issue:

diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh
index 6c5f1b2ffb74..1cbb12e284a6 100755
--- a/tools/testing/selftests/firmware/fw_lib.sh
+++ b/tools/testing/selftests/firmware/fw_lib.sh
@@ -91,7 +91,7 @@ verify_reqs()
 	if [ "$TEST_REQS_FW_SYSFS_FALLBACK" = "yes" ]; then
 		if [ ! "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
 			echo "usermode helper disabled so ignoring test"
-			exit $ksft_skip
+			exit 0
 		fi
 	fi
 }

However its not clear to me if instead we want some new special return
value for selftests so that the framework can detect an that an error
is non-fatal, and can continue. This is a tricky situation given the
script, existing upstream kernel module, are aware of such emulation
hacks via sysctl, but knowledge of this is not obvious to selftests.

Shuah, how do you suggest we handle this corner case? If you are OK
with the above hunk for now I can send a fix for it. In either case
this commit was added on v4.18, so the fix would be a stable fix.

  Luis
Luis Chamberlain Feb. 4, 2019, 11:39 p.m. UTC | #3
On Thu, Nov 29, 2018 at 8:31 PM Luis Chamberlain <mcgrof@kernel.org> wrote:
>
> On Mon, Nov 26, 2018 at 09:12:16PM -0600, Dan Rue wrote:
> > CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y is required for fw_fallback.sh.
> > Without it, fw_fallback.sh fails with 'usermode helper disabled so
> > ignoring test'. Enable the config in selftest so that it gets built by
> > default.
> >
> > Signed-off-by: Dan Rue <dan.rue@linaro.org>
> > ---
> >  tools/testing/selftests/firmware/config | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/tools/testing/selftests/firmware/config b/tools/testing/selftests/firmware/config
> > index bf634dda0720..913a25a4a32b 100644
> > --- a/tools/testing/selftests/firmware/config
> > +++ b/tools/testing/selftests/firmware/config
> > @@ -1,5 +1,6 @@
> >  CONFIG_TEST_FIRMWARE=y
> >  CONFIG_FW_LOADER=y
> >  CONFIG_FW_LOADER_USER_HELPER=y
> > +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
> >  CONFIG_IKCONFIG=y
> >  CONFIG_IKCONFIG_PROC=y
>
> NACK -- the point of the changes was to *allow* us to mimic such
> configuration through a proc sysctl knob.
>
> You aren forcing CONFIG_FW_LOADER_USER_HELPER_FALLBACK but just having
> CONFIG_FW_LOADER_USER_HELPER suffices to emulate the_FALLBACK
> functionality.

Dan, again, you broke the whole point to the amount of work that went
into emulating testing. As such anyone testing their changes would
yield incorrect results.

> The issue here seems to be that *all* tests fail once a configuration is
> found which is not suitable a tests. With the shiny new proc sysctls we
> can test all 3 kernel configurations in one shot. Since we test 3
> different kernel configurations naturally some of these won't have the
> features needed, so that failure should be treated as non-fatal to allow
> the chain of other tests to continue.
>
> This issue was a regression due to commit a6a9be9270c87 ("selftests:
> firmware: return Kselftest Skip code for skipped tests") by Shuah for
> the verify_reqs(). We need to treat this as a non-fatal / don't skip
> return value.
>
> The following would fix this chaining issue:
>
> diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh
> index 6c5f1b2ffb74..1cbb12e284a6 100755
> --- a/tools/testing/selftests/firmware/fw_lib.sh
> +++ b/tools/testing/selftests/firmware/fw_lib.sh
> @@ -91,7 +91,7 @@ verify_reqs()
>         if [ "$TEST_REQS_FW_SYSFS_FALLBACK" = "yes" ]; then
>                 if [ ! "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
>                         echo "usermode helper disabled so ignoring test"
> -                       exit $ksft_skip
> +                       exit 0
>                 fi
>         fi
>  }
>
> However its not clear to me if instead we want some new special return
> value for selftests so that the framework can detect an that an error
> is non-fatal, and can continue. This is a tricky situation given the
> script, existing upstream kernel module, are aware of such emulation
> hacks via sysctl, but knowledge of this is not obvious to selftests.
>
> Shuah, how do you suggest we handle this corner case? If you are OK
> with the above hunk for now I can send a fix for it. In either case
> this commit was added on v4.18, so the fix would be a stable fix.

In lieu of any suggestion I'm going to request we revert this commit
and send the above fix.

 Luis
Dan Rue Feb. 5, 2019, 2:41 a.m. UTC | #4
On Mon, Feb 04, 2019 at 05:39:57PM -0600, Luis Chamberlain wrote:
> On Thu, Nov 29, 2018 at 8:31 PM Luis Chamberlain <mcgrof@kernel.org> wrote:
> >
> > On Mon, Nov 26, 2018 at 09:12:16PM -0600, Dan Rue wrote:
> > > CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y is required for fw_fallback.sh.
> > > Without it, fw_fallback.sh fails with 'usermode helper disabled so
> > > ignoring test'. Enable the config in selftest so that it gets built by
> > > default.
> > >
> > > Signed-off-by: Dan Rue <dan.rue@linaro.org>
> > > ---
> > >  tools/testing/selftests/firmware/config | 1 +
> > >  1 file changed, 1 insertion(+)
> > >
> > > diff --git a/tools/testing/selftests/firmware/config b/tools/testing/selftests/firmware/config
> > > index bf634dda0720..913a25a4a32b 100644
> > > --- a/tools/testing/selftests/firmware/config
> > > +++ b/tools/testing/selftests/firmware/config
> > > @@ -1,5 +1,6 @@
> > >  CONFIG_TEST_FIRMWARE=y
> > >  CONFIG_FW_LOADER=y
> > >  CONFIG_FW_LOADER_USER_HELPER=y
> > > +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
> > >  CONFIG_IKCONFIG=y
> > >  CONFIG_IKCONFIG_PROC=y
> >
> > NACK -- the point of the changes was to *allow* us to mimic such
> > configuration through a proc sysctl knob.
> >
> > You aren forcing CONFIG_FW_LOADER_USER_HELPER_FALLBACK but just having
> > CONFIG_FW_LOADER_USER_HELPER suffices to emulate the_FALLBACK
> > functionality.
> 
> Dan, again, you broke the whole point to the amount of work that went
> into emulating testing. As such anyone testing their changes would
> yield incorrect results.
> 
> > The issue here seems to be that *all* tests fail once a configuration is
> > found which is not suitable a tests. With the shiny new proc sysctls we
> > can test all 3 kernel configurations in one shot. Since we test 3
> > different kernel configurations naturally some of these won't have the
> > features needed, so that failure should be treated as non-fatal to allow
> > the chain of other tests to continue.
> >
> > This issue was a regression due to commit a6a9be9270c87 ("selftests:
> > firmware: return Kselftest Skip code for skipped tests") by Shuah for
> > the verify_reqs(). We need to treat this as a non-fatal / don't skip
> > return value.
> >
> > The following would fix this chaining issue:
> >
> > diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh
> > index 6c5f1b2ffb74..1cbb12e284a6 100755
> > --- a/tools/testing/selftests/firmware/fw_lib.sh
> > +++ b/tools/testing/selftests/firmware/fw_lib.sh
> > @@ -91,7 +91,7 @@ verify_reqs()
> >         if [ "$TEST_REQS_FW_SYSFS_FALLBACK" = "yes" ]; then
> >                 if [ ! "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
> >                         echo "usermode helper disabled so ignoring test"
> > -                       exit $ksft_skip
> > +                       exit 0
> >                 fi
> >         fi
> >  }
> >
> > However its not clear to me if instead we want some new special return
> > value for selftests so that the framework can detect an that an error
> > is non-fatal, and can continue. This is a tricky situation given the
> > script, existing upstream kernel module, are aware of such emulation
> > hacks via sysctl, but knowledge of this is not obvious to selftests.
> >
> > Shuah, how do you suggest we handle this corner case? If you are OK
> > with the above hunk for now I can send a fix for it. In either case
> > this commit was added on v4.18, so the fix would be a stable fix.
> 
> In lieu of any suggestion I'm going to request we revert this commit
> and send the above fix.

Sorry, I didn't realize this was waiting on me. I agree with all of your
feedback. Please revert 7492902e8d22 ("selftests: firmware: add
CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config") and add my Acked-by to
the proposed fix above.

Shuah, do I need to send a patch for that revert?

It would be nice if there were a way (maybe there is?) to let each of
the individual tests be exposed and run by run_kselftest.sh so that each
test gets its own proper pass/skip/fail. It could be done in this case
by making fw_run_tests.sh look more like run_kselftest.sh (running each
test in a subshell and capturing its exit code), but that starts to get
a bit fragile and ugly, too.

Dan

> 
>  Luis
Luis Chamberlain Feb. 5, 2019, 7:14 p.m. UTC | #5
On Mon, Feb 04, 2019 at 08:41:50PM -0600, Dan Rue wrote:
> On Mon, Feb 04, 2019 at 05:39:57PM -0600, Luis Chamberlain wrote:
> > On Thu, Nov 29, 2018 at 8:31 PM Luis Chamberlain <mcgrof@kernel.org> wrote:
> > >
> > > On Mon, Nov 26, 2018 at 09:12:16PM -0600, Dan Rue wrote:
> > > > CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y is required for fw_fallback.sh.
> > > > Without it, fw_fallback.sh fails with 'usermode helper disabled so
> > > > ignoring test'. Enable the config in selftest so that it gets built by
> > > > default.
> > > >
> > > > Signed-off-by: Dan Rue <dan.rue@linaro.org>
> > > > ---
> > > >  tools/testing/selftests/firmware/config | 1 +
> > > >  1 file changed, 1 insertion(+)
> > > >
> > > > diff --git a/tools/testing/selftests/firmware/config b/tools/testing/selftests/firmware/config
> > > > index bf634dda0720..913a25a4a32b 100644
> > > > --- a/tools/testing/selftests/firmware/config
> > > > +++ b/tools/testing/selftests/firmware/config
> > > > @@ -1,5 +1,6 @@
> > > >  CONFIG_TEST_FIRMWARE=y
> > > >  CONFIG_FW_LOADER=y
> > > >  CONFIG_FW_LOADER_USER_HELPER=y
> > > > +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
> > > >  CONFIG_IKCONFIG=y
> > > >  CONFIG_IKCONFIG_PROC=y
> > >
> > > NACK -- the point of the changes was to *allow* us to mimic such
> > > configuration through a proc sysctl knob.
> > >
> > > You aren forcing CONFIG_FW_LOADER_USER_HELPER_FALLBACK but just having
> > > CONFIG_FW_LOADER_USER_HELPER suffices to emulate the_FALLBACK
> > > functionality.
> > 
> > Dan, again, you broke the whole point to the amount of work that went
> > into emulating testing. As such anyone testing their changes would
> > yield incorrect results.
> > 
> > > The issue here seems to be that *all* tests fail once a configuration is
> > > found which is not suitable a tests. With the shiny new proc sysctls we
> > > can test all 3 kernel configurations in one shot. Since we test 3
> > > different kernel configurations naturally some of these won't have the
> > > features needed, so that failure should be treated as non-fatal to allow
> > > the chain of other tests to continue.
> > >
> > > This issue was a regression due to commit a6a9be9270c87 ("selftests:
> > > firmware: return Kselftest Skip code for skipped tests") by Shuah for
> > > the verify_reqs(). We need to treat this as a non-fatal / don't skip
> > > return value.
> > >
> > > The following would fix this chaining issue:
> > >
> > > diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh
> > > index 6c5f1b2ffb74..1cbb12e284a6 100755
> > > --- a/tools/testing/selftests/firmware/fw_lib.sh
> > > +++ b/tools/testing/selftests/firmware/fw_lib.sh
> > > @@ -91,7 +91,7 @@ verify_reqs()
> > >         if [ "$TEST_REQS_FW_SYSFS_FALLBACK" = "yes" ]; then
> > >                 if [ ! "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
> > >                         echo "usermode helper disabled so ignoring test"
> > > -                       exit $ksft_skip
> > > +                       exit 0
> > >                 fi
> > >         fi
> > >  }
> > >
> > > However its not clear to me if instead we want some new special return
> > > value for selftests so that the framework can detect an that an error
> > > is non-fatal, and can continue. This is a tricky situation given the
> > > script, existing upstream kernel module, are aware of such emulation
> > > hacks via sysctl, but knowledge of this is not obvious to selftests.
> > >
> > > Shuah, how do you suggest we handle this corner case? If you are OK
> > > with the above hunk for now I can send a fix for it. In either case
> > > this commit was added on v4.18, so the fix would be a stable fix.
> > 
> > In lieu of any suggestion I'm going to request we revert this commit
> > and send the above fix.
> 
> Sorry, I didn't realize this was waiting on me. I agree with all of your
> feedback. Please revert 7492902e8d22 ("selftests: firmware: add
> CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config") and add my Acked-by to
> the proposed fix above.
> 
> Shuah, do I need to send a patch for that revert?

I can send the revert and the subsequent fix.

  Luis
diff mbox series

Patch

diff --git a/tools/testing/selftests/firmware/config b/tools/testing/selftests/firmware/config
index bf634dda0720..913a25a4a32b 100644
--- a/tools/testing/selftests/firmware/config
+++ b/tools/testing/selftests/firmware/config
@@ -1,5 +1,6 @@ 
 CONFIG_TEST_FIRMWARE=y
 CONFIG_FW_LOADER=y
 CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y