diff mbox series

kselftest: alsa: Check for event generation when we write to controls

Message ID 20220201151551.21497-1-broonie@kernel.org (mailing list archive)
State New
Headers show
Series kselftest: alsa: Check for event generation when we write to controls | expand

Commit Message

Mark Brown Feb. 1, 2022, 3:15 p.m. UTC
Add some coverage of event generation to mixer-test. Rather than doing a
separate set of writes designed to trigger events we add a step to the
existing write_and_verify() which checks to see if the value we read back
from non-volatile controls matches the value before writing and that an
event is or isn't generated as appropriate. The "tests" for events then
simply check that no spurious or missing events were detected. This avoids
needing further logic to generate appropriate values for each control type
and maximises coverage.

When checking for events we use a timeout of 0. This relies on the kernel
generating any event prior to returning to userspace when setting a control.
That is currently the case and it is difficult to see it changing, if it
does the test will need to be updated. Using a delay of 0 means that we
don't slow things down unduly when checking for no event or when events
fail to be generated.

We don't check behaviour for volatile controls since we can't tell what
the behaviour is supposed to be for any given control.

Signed-off-by: Mark Brown <broonie@kernel.org>
---
 tools/testing/selftests/alsa/mixer-test.c | 148 +++++++++++++++++++++-
 1 file changed, 145 insertions(+), 3 deletions(-)

Comments

Shuah Khan Feb. 1, 2022, 4:18 p.m. UTC | #1
Hi Mark,

On 2/1/22 8:15 AM, Mark Brown wrote:
> Add some coverage of event generation to mixer-test. Rather than doing a
> separate set of writes designed to trigger events we add a step to the
> existing write_and_verify() which checks to see if the value we read back
> from non-volatile controls matches the value before writing and that an
> event is or isn't generated as appropriate. The "tests" for events then
> simply check that no spurious or missing events were detected. This avoids
> needing further logic to generate appropriate values for each control type
> and maximises coverage.
> 
> When checking for events we use a timeout of 0. This relies on the kernel
> generating any event prior to returning to userspace when setting a control.
> That is currently the case and it is difficult to see it changing, if it
> does the test will need to be updated. Using a delay of 0 means that we
> don't slow things down unduly when checking for no event or when events
> fail to be generated.
> 
> We don't check behaviour for volatile controls since we can't tell what
> the behaviour is supposed to be for any given control.
> 
> Signed-off-by: Mark Brown <broonie@kernel.org>
> ---
>   tools/testing/selftests/alsa/mixer-test.c | 148 +++++++++++++++++++++-
>   1 file changed, 145 insertions(+), 3 deletions(-)
> 
> diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c
> index 0e88f4f3d802..42cf3b724586 100644
> --- a/tools/testing/selftests/alsa/mixer-test.c
> +++ b/tools/testing/selftests/alsa/mixer-test.c
> @@ -3,7 +3,7 @@
>   // kselftest for the ALSA mixer API
>   //
>   // Original author: Mark Brown <broonie@kernel.org>
> -// Copyright (c) 2021 Arm Limited
> +// Copyright (c) 2021-2 Arm Limited
>   
>   // This test will iterate over all cards detected in the system, exercising
>   // every mixer control it can find.  This may conflict with other system
> @@ -27,11 +27,12 @@
>   
>   #include "../kselftest.h"
>   
> -#define TESTS_PER_CONTROL 4
> +#define TESTS_PER_CONTROL 6
>   
>   struct card_data {
>   	snd_ctl_t *handle;
>   	int card;
> +	struct pollfd pollfd;
>   	int num_ctls;
>   	snd_ctl_elem_list_t *ctls;
>   	struct card_data *next;
> @@ -43,6 +44,8 @@ struct ctl_data {
>   	snd_ctl_elem_info_t *info;
>   	snd_ctl_elem_value_t *def_val;
>   	int elem;
> +	int event_missing;
> +	int event_spurious;
>   	struct card_data *card;
>   	struct ctl_data *next;
>   };
> @@ -149,6 +152,7 @@ void find_controls(void)
>   			if (!ctl_data)
>   				ksft_exit_fail_msg("Out of memory\n");
>   
> +			memset(ctl_data, 0, sizeof(*ctl_data));
>   			ctl_data->card = card_data;
>   			ctl_data->elem = ctl;
>   			ctl_data->name = snd_ctl_elem_list_get_name(card_data->ctls,
> @@ -184,6 +188,26 @@ void find_controls(void)
>   			ctl_list = ctl_data;
>   		}
>   
> +		/* Set up for events */
> +		err = snd_ctl_subscribe_events(card_data->handle, true);
> +		if (err < 0) {
> +			ksft_exit_fail_msg("snd_ctl_subscribe_events() failed for card %d: %d\n",
> +					   card, err);
> +		}
> +
> +		err = snd_ctl_poll_descriptors_count(card_data->handle);
> +		if (err != 1) {
> +			ksft_exit_fail_msg("Unexpected desciptor count %d for card %d\n",
> +					   err, card);
> +		}
> +
> +		err = snd_ctl_poll_descriptors(card_data->handle,
> +					       &card_data->pollfd, 1);
> +		if (err != 1) {
> +			ksft_exit_fail_msg("snd_ctl_poll_descriptors() failed for %d\n",
> +				       card, err);
> +		}
> +
>   	next_card:
>   		if (snd_card_next(&card) < 0) {
>   			ksft_print_msg("snd_card_next");
> @@ -194,6 +218,73 @@ void find_controls(void)
>   	snd_config_delete(config);
>   }
>   
> +/*
> + * Block for up to timeout ms for an event, returns a negative value
> + * on error, 0 for no event and 1 for an event.
> + */
> +int wait_for_event(struct ctl_data *ctl, int timeout)

Let's make this static.

> +{
> +	unsigned short revents;
> +	snd_ctl_event_t *event;
> +	int count, err;
> +	unsigned int mask = 0;
> +	unsigned int ev_id;
> +
> +	snd_ctl_event_alloca(&event);
> +
> +	do {
> +		err = poll(&(ctl->card->pollfd), 1, timeout);
> +		if (err < 0) {
> +			ksft_print_msg("poll() failed for %s: %s (%d)\n",
> +				       ctl->name, strerror(errno), errno);
> +			return -1;
> +		}
> +		/* Timeout */
> +		if (err == 0)
> +			return 0;
> +
> +		err = snd_ctl_poll_descriptors_revents(ctl->card->handle,
> +						       &(ctl->card->pollfd),
> +						       1, &revents);
> +		if (err < 0) {
> +			ksft_print_msg("snd_ctl_poll_desciptors_revents() failed for %s: %d\n",
> +				       ctl->name, err);
> +			return err;
> +		}
> +		if (revents & POLLERR) {
> +			ksft_print_msg("snd_ctl_poll_desciptors_revents() reported POLLERR for %s\n",
> +				       ctl->name);
> +			return -1;
> +		}
> +		/* No read events */
> +		if (!(revents & POLLIN)) {
> +			ksft_print_msg("No POLLIN\n");
> +			continue;
> +		}
> +
> +		err = snd_ctl_read(ctl->card->handle, event);
> +		if (err < 0) {
> +			ksft_print_msg("snd_ctl_read() failed for %s: %d\n",
> +			       ctl->name, err);
> +			return err;
> +		}
> +
> +		if (snd_ctl_event_get_type(event) != SND_CTL_EVENT_ELEM)
> +			continue;
> +
> +		/* The ID returned from the event is 1 less than numid */
> +		mask = snd_ctl_event_elem_get_mask(event);
> +		ev_id = snd_ctl_event_elem_get_numid(event);
> +		if (ev_id != ctl->elem + 1) {
> +			ksft_print_msg("Event for unexpected ctl %s\n",
> +				       snd_ctl_event_elem_get_name(event));
> +			continue;
> +		}
> +	} while ((mask & SND_CTL_EVENT_MASK_VALUE) != SND_CTL_EVENT_MASK_VALUE);
> +
> +	return 1;
> +}
> +
>   bool ctl_value_index_valid(struct ctl_data *ctl, snd_ctl_elem_value_t *val,
>   			   int index)
>   {
> @@ -428,7 +519,8 @@ int write_and_verify(struct ctl_data *ctl,
>   {
>   	int err, i;
>   	bool error_expected, mismatch_shown;
> -	snd_ctl_elem_value_t *read_val, *w_val;
> +	snd_ctl_elem_value_t *initial_val, *read_val, *w_val;
> +	snd_ctl_elem_value_alloca(&initial_val);
>   	snd_ctl_elem_value_alloca(&read_val);
>   	snd_ctl_elem_value_alloca(&w_val);
>   
> @@ -446,6 +538,18 @@ int write_and_verify(struct ctl_data *ctl,
>   		snd_ctl_elem_value_copy(expected_val, write_val);
>   	}
>   
> +	/* Store the value before we write */
> +	if (snd_ctl_elem_info_is_readable(ctl->info)) {
> +		snd_ctl_elem_value_set_id(initial_val, ctl->id);
> +
> +		err = snd_ctl_elem_read(ctl->card->handle, initial_val);
> +		if (err < 0) {
> +			ksft_print_msg("snd_ctl_elem_read() failed: %s\n",
> +				       snd_strerror(err));
> +			return err;
> +		}
> +	}
> +
>   	/*
>   	 * Do the write, if we have an expected value ignore the error
>   	 * and carry on to validate the expected value.
> @@ -470,6 +574,30 @@ int write_and_verify(struct ctl_data *ctl,
>   		return err;
>   	}
>   
> +	/*
> +	 * Check for an event if the value changed, or confirm that
> +	 * there was none if it didn't.  We rely on the kernel
> +	 * generating the notification before it returns from the
> +	 * write, this is currently true, should that ever change this
> +	 * will most likely break and need updating.
> +	 */
> +	if (!snd_ctl_elem_info_is_volatile(ctl->info)) {
> +		err = wait_for_event(ctl, 0);
> +		if (snd_ctl_elem_value_compare(initial_val, read_val)) {
> +			if (err < 1) {
> +				ksft_print_msg("No event generated for %s\n",
> +					       ctl->name);
> +				ctl->event_missing++;
> +			}
> +		} else {
> +			if (err != 0) {
> +				ksft_print_msg("Spurious event generated for %s\n",
> +					       ctl->name);
> +				ctl->event_spurious++;
> +			}
> +		}
> +	}
> +
>   	/*
>   	 * Use the libray to compare values, if there's a mismatch
>   	 * carry on and try to provide a more useful diagnostic than
> @@ -898,6 +1026,18 @@ void test_ctl_write_invalid(struct ctl_data *ctl)
>   			 ctl->card->card, ctl->elem);
>   }
>   
> +void test_ctl_event_missing(struct ctl_data *ctl)

Let's make this static.

> +{
> +	ksft_test_result(!ctl->event_missing, "event_missing.%d.%d\n",
> +			 ctl->card->card, ctl->elem);
> +}
> +
> +void test_ctl_event_spurious(struct ctl_data *ctl)

Let's make this static.

> +{
> +	ksft_test_result(!ctl->event_spurious, "event_spurious.%d.%d\n",
> +			 ctl->card->card, ctl->elem);
> +}
> +
>   int main(void)
>   {
>   	struct ctl_data *ctl;
> @@ -917,6 +1057,8 @@ int main(void)
>   		test_ctl_write_default(ctl);
>   		test_ctl_write_valid(ctl);
>   		test_ctl_write_invalid(ctl);
> +		test_ctl_event_missing(ctl);
> +		test_ctl_event_spurious(ctl);
>   	}
>   
>   	ksft_exit_pass();
> 

Otherwise looks good to me.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah
Mark Brown Feb. 1, 2022, 5:43 p.m. UTC | #2
On Tue, Feb 01, 2022 at 09:18:52AM -0700, Shuah Khan wrote:
> On 2/1/22 8:15 AM, Mark Brown wrote:

> > +int wait_for_event(struct ctl_data *ctl, int timeout)
> 
> Let's make this static.

None of the other functions in this file are static, that'd be a further
change to make the whole file consistent rather than having a mix I
think.
Shuah Khan Feb. 1, 2022, 5:45 p.m. UTC | #3
On 2/1/22 10:43 AM, Mark Brown wrote:
> On Tue, Feb 01, 2022 at 09:18:52AM -0700, Shuah Khan wrote:
>> On 2/1/22 8:15 AM, Mark Brown wrote:
> 
>>> +int wait_for_event(struct ctl_data *ctl, int timeout)
>>
>> Let's make this static.
> 
> None of the other functions in this file are static, that'd be a further
> change to make the whole file consistent rather than having a mix I
> think.
> 

Let's plan for it as a separate patch then.

thanks,
-- Shuah
Takashi Sakamoto Feb. 2, 2022, 1:56 a.m. UTC | #4
Hi Mark,

On Tue, Feb 01, 2022 at 03:15:51PM +0000, Mark Brown wrote:
> Add some coverage of event generation to mixer-test. Rather than doing a
> separate set of writes designed to trigger events we add a step to the
> existing write_and_verify() which checks to see if the value we read back
> from non-volatile controls matches the value before writing and that an
> event is or isn't generated as appropriate. The "tests" for events then
> simply check that no spurious or missing events were detected. This avoids
> needing further logic to generate appropriate values for each control type
> and maximises coverage.
> 
> When checking for events we use a timeout of 0. This relies on the kernel
> generating any event prior to returning to userspace when setting a control.
> That is currently the case and it is difficult to see it changing, if it
> does the test will need to be updated. Using a delay of 0 means that we
> don't slow things down unduly when checking for no event or when events
> fail to be generated.
> 
> We don't check behaviour for volatile controls since we can't tell what
> the behaviour is supposed to be for any given control.
> 
> Signed-off-by: Mark Brown <broonie@kernel.org>
> ---
>  tools/testing/selftests/alsa/mixer-test.c | 148 +++++++++++++++++++++-
>  1 file changed, 145 insertions(+), 3 deletions(-)
 
I'm still under reviewing your patch, while I have a slight concern
about the evaluation of 'struct snd_ctl_event.data.elem.id.numid'.

> diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c
> index 0e88f4f3d802..42cf3b724586 100644
> --- a/tools/testing/selftests/alsa/mixer-test.c
> +++ b/tools/testing/selftests/alsa/mixer-test.c
> ...
> +/*
> + * Block for up to timeout ms for an event, returns a negative value
> + * on error, 0 for no event and 1 for an event.
> + */
> +int wait_for_event(struct ctl_data *ctl, int timeout)
> +{
> ...
> +		/* The ID returned from the event is 1 less than numid */
> +		mask = snd_ctl_event_elem_get_mask(event);
> +		ev_id = snd_ctl_event_elem_get_numid(event);
> +		if (ev_id != ctl->elem + 1) {
> +			ksft_print_msg("Event for unexpected ctl %s\n",
> +				       snd_ctl_event_elem_get_name(event));
> +			continue;
> +		}
> +	} while ((mask & SND_CTL_EVENT_MASK_VALUE) != SND_CTL_EVENT_MASK_VALUE);
> +
> +	return 1;
> +}

As long as I know, the design of ALSA control core just exposes the
numeric identification of a control element issued for notification in
'snd_ctl_event' structure. On the other hand, the above evaluation
expects decremented value against position of queried list structure
has come.

I note that current design of ALSA control core is:
 * 1 is selected for numeric identification of the first element in the
   first element set added to sound card.
 * at removal of element set, the series of assigned numeric identification
   becomes blank (coded as hole).
 * Userspace application can always add/remove element set to the card.
 * the position of element in queried list structure does not
   necessarily corresponds to numeric identification even if decremented
   by 1 due to the hole.

Of cource, I can see the decremented-by-1 comparison covers the most cases
in which developer requires the test (excluding the case of user-defined
control element set), while we can use numid value got from 'id' field of
'ctl_data' structure for the comparison. I think the alternative way has
fewer problems than the decremented-by-1 comparison based on the rough
assumption against the design.


Regards

Takashi Sakamoto
Mark Brown Feb. 2, 2022, 1:22 p.m. UTC | #5
On Wed, Feb 02, 2022 at 10:56:01AM +0900, Takashi Sakamoto wrote:
> On Tue, Feb 01, 2022 at 03:15:51PM +0000, Mark Brown wrote:

> > +		/* The ID returned from the event is 1 less than numid */
> > +		mask = snd_ctl_event_elem_get_mask(event);
> > +		ev_id = snd_ctl_event_elem_get_numid(event);
> > +		if (ev_id != ctl->elem + 1) {

> As long as I know, the design of ALSA control core just exposes the
> numeric identification of a control element issued for notification in
> 'snd_ctl_event' structure. On the other hand, the above evaluation
> expects decremented value against position of queried list structure
> has come.

> I note that current design of ALSA control core is:
>  * 1 is selected for numeric identification of the first element in the
>    first element set added to sound card.
>  * at removal of element set, the series of assigned numeric identification
>    becomes blank (coded as hole).
>  * Userspace application can always add/remove element set to the card.
>  * the position of element in queried list structure does not
>    necessarily corresponds to numeric identification even if decremented
>    by 1 due to the hole.

Oh, I see - we have multiple IDs here which is what's confusing things.
This looked wrong when I was writing it and I was hoping someone would
confirm what was going on on review so thanks.
diff mbox series

Patch

diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c
index 0e88f4f3d802..42cf3b724586 100644
--- a/tools/testing/selftests/alsa/mixer-test.c
+++ b/tools/testing/selftests/alsa/mixer-test.c
@@ -3,7 +3,7 @@ 
 // kselftest for the ALSA mixer API
 //
 // Original author: Mark Brown <broonie@kernel.org>
-// Copyright (c) 2021 Arm Limited
+// Copyright (c) 2021-2 Arm Limited
 
 // This test will iterate over all cards detected in the system, exercising
 // every mixer control it can find.  This may conflict with other system
@@ -27,11 +27,12 @@ 
 
 #include "../kselftest.h"
 
-#define TESTS_PER_CONTROL 4
+#define TESTS_PER_CONTROL 6
 
 struct card_data {
 	snd_ctl_t *handle;
 	int card;
+	struct pollfd pollfd;
 	int num_ctls;
 	snd_ctl_elem_list_t *ctls;
 	struct card_data *next;
@@ -43,6 +44,8 @@  struct ctl_data {
 	snd_ctl_elem_info_t *info;
 	snd_ctl_elem_value_t *def_val;
 	int elem;
+	int event_missing;
+	int event_spurious;
 	struct card_data *card;
 	struct ctl_data *next;
 };
@@ -149,6 +152,7 @@  void find_controls(void)
 			if (!ctl_data)
 				ksft_exit_fail_msg("Out of memory\n");
 
+			memset(ctl_data, 0, sizeof(*ctl_data));
 			ctl_data->card = card_data;
 			ctl_data->elem = ctl;
 			ctl_data->name = snd_ctl_elem_list_get_name(card_data->ctls,
@@ -184,6 +188,26 @@  void find_controls(void)
 			ctl_list = ctl_data;
 		}
 
+		/* Set up for events */
+		err = snd_ctl_subscribe_events(card_data->handle, true);
+		if (err < 0) {
+			ksft_exit_fail_msg("snd_ctl_subscribe_events() failed for card %d: %d\n",
+					   card, err);
+		}
+
+		err = snd_ctl_poll_descriptors_count(card_data->handle);
+		if (err != 1) {
+			ksft_exit_fail_msg("Unexpected desciptor count %d for card %d\n",
+					   err, card);
+		}
+
+		err = snd_ctl_poll_descriptors(card_data->handle,
+					       &card_data->pollfd, 1);
+		if (err != 1) {
+			ksft_exit_fail_msg("snd_ctl_poll_descriptors() failed for %d\n",
+				       card, err);
+		}
+
 	next_card:
 		if (snd_card_next(&card) < 0) {
 			ksft_print_msg("snd_card_next");
@@ -194,6 +218,73 @@  void find_controls(void)
 	snd_config_delete(config);
 }
 
+/*
+ * Block for up to timeout ms for an event, returns a negative value
+ * on error, 0 for no event and 1 for an event.
+ */
+int wait_for_event(struct ctl_data *ctl, int timeout)
+{
+	unsigned short revents;
+	snd_ctl_event_t *event;
+	int count, err;
+	unsigned int mask = 0;
+	unsigned int ev_id;
+
+	snd_ctl_event_alloca(&event);
+
+	do {
+		err = poll(&(ctl->card->pollfd), 1, timeout);
+		if (err < 0) {
+			ksft_print_msg("poll() failed for %s: %s (%d)\n",
+				       ctl->name, strerror(errno), errno);
+			return -1;
+		}
+		/* Timeout */
+		if (err == 0)
+			return 0;
+
+		err = snd_ctl_poll_descriptors_revents(ctl->card->handle,
+						       &(ctl->card->pollfd),
+						       1, &revents);
+		if (err < 0) {
+			ksft_print_msg("snd_ctl_poll_desciptors_revents() failed for %s: %d\n",
+				       ctl->name, err);
+			return err;
+		}
+		if (revents & POLLERR) {
+			ksft_print_msg("snd_ctl_poll_desciptors_revents() reported POLLERR for %s\n",
+				       ctl->name);
+			return -1;
+		}
+		/* No read events */
+		if (!(revents & POLLIN)) {
+			ksft_print_msg("No POLLIN\n");
+			continue;
+		}
+
+		err = snd_ctl_read(ctl->card->handle, event);
+		if (err < 0) {
+			ksft_print_msg("snd_ctl_read() failed for %s: %d\n",
+			       ctl->name, err);
+			return err;
+		}
+
+		if (snd_ctl_event_get_type(event) != SND_CTL_EVENT_ELEM)
+			continue;
+
+		/* The ID returned from the event is 1 less than numid */
+		mask = snd_ctl_event_elem_get_mask(event);
+		ev_id = snd_ctl_event_elem_get_numid(event);
+		if (ev_id != ctl->elem + 1) {
+			ksft_print_msg("Event for unexpected ctl %s\n",
+				       snd_ctl_event_elem_get_name(event));
+			continue;
+		}
+	} while ((mask & SND_CTL_EVENT_MASK_VALUE) != SND_CTL_EVENT_MASK_VALUE);
+
+	return 1;
+}
+
 bool ctl_value_index_valid(struct ctl_data *ctl, snd_ctl_elem_value_t *val,
 			   int index)
 {
@@ -428,7 +519,8 @@  int write_and_verify(struct ctl_data *ctl,
 {
 	int err, i;
 	bool error_expected, mismatch_shown;
-	snd_ctl_elem_value_t *read_val, *w_val;
+	snd_ctl_elem_value_t *initial_val, *read_val, *w_val;
+	snd_ctl_elem_value_alloca(&initial_val);
 	snd_ctl_elem_value_alloca(&read_val);
 	snd_ctl_elem_value_alloca(&w_val);
 
@@ -446,6 +538,18 @@  int write_and_verify(struct ctl_data *ctl,
 		snd_ctl_elem_value_copy(expected_val, write_val);
 	}
 
+	/* Store the value before we write */
+	if (snd_ctl_elem_info_is_readable(ctl->info)) {
+		snd_ctl_elem_value_set_id(initial_val, ctl->id);
+
+		err = snd_ctl_elem_read(ctl->card->handle, initial_val);
+		if (err < 0) {
+			ksft_print_msg("snd_ctl_elem_read() failed: %s\n",
+				       snd_strerror(err));
+			return err;
+		}
+	}
+
 	/*
 	 * Do the write, if we have an expected value ignore the error
 	 * and carry on to validate the expected value.
@@ -470,6 +574,30 @@  int write_and_verify(struct ctl_data *ctl,
 		return err;
 	}
 
+	/*
+	 * Check for an event if the value changed, or confirm that
+	 * there was none if it didn't.  We rely on the kernel
+	 * generating the notification before it returns from the
+	 * write, this is currently true, should that ever change this
+	 * will most likely break and need updating.
+	 */
+	if (!snd_ctl_elem_info_is_volatile(ctl->info)) {
+		err = wait_for_event(ctl, 0);
+		if (snd_ctl_elem_value_compare(initial_val, read_val)) {
+			if (err < 1) {
+				ksft_print_msg("No event generated for %s\n",
+					       ctl->name);
+				ctl->event_missing++;
+			}
+		} else {
+			if (err != 0) {
+				ksft_print_msg("Spurious event generated for %s\n",
+					       ctl->name);
+				ctl->event_spurious++;
+			}
+		}
+	}
+
 	/*
 	 * Use the libray to compare values, if there's a mismatch
 	 * carry on and try to provide a more useful diagnostic than
@@ -898,6 +1026,18 @@  void test_ctl_write_invalid(struct ctl_data *ctl)
 			 ctl->card->card, ctl->elem);
 }
 
+void test_ctl_event_missing(struct ctl_data *ctl)
+{
+	ksft_test_result(!ctl->event_missing, "event_missing.%d.%d\n",
+			 ctl->card->card, ctl->elem);
+}
+
+void test_ctl_event_spurious(struct ctl_data *ctl)
+{
+	ksft_test_result(!ctl->event_spurious, "event_spurious.%d.%d\n",
+			 ctl->card->card, ctl->elem);
+}
+
 int main(void)
 {
 	struct ctl_data *ctl;
@@ -917,6 +1057,8 @@  int main(void)
 		test_ctl_write_default(ctl);
 		test_ctl_write_valid(ctl);
 		test_ctl_write_invalid(ctl);
+		test_ctl_event_missing(ctl);
+		test_ctl_event_spurious(ctl);
 	}
 
 	ksft_exit_pass();