| Message ID | 20220509204909.2464496-1-dlatypov@google.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 0453f984a7b9458f0e469afb039f2841308b1bef |
| Delegated to: | Brendan Higgins |
| Headers | show |
| Series | kunit: tool: misc cleanups | expand |
On Tue, May 10, 2022 at 4:49 AM Daniel Latypov <dlatypov@google.com> wrote: > > This primarily comes from running pylint over kunit tool code and > ignoring some warnings we don't care about. > If we ever got a fully clean setup, we could add this to run_checks.py, > but we're not there yet. > > Fix things like > * Drop unused imports > * check `is None`, not `== None` (see PEP 8) > * remove redundant parens around returns > * remove redundant `else` / convert `elif` to `if` where appropriate Personally, I find the explicit 'elif' much more readable in most of these cases, but if we're annoying a linter, I guess we should change them... > * rename make_arch_qemuconfig() param to base_kunitconfig (this is the > name used in the subclass, and it's a better one) > * kunit_tool_test: check the exit code for SystemExit (could be 0) > > Signed-off-by: Daniel Latypov <dlatypov@google.com> > --- All of these changes seem correct to me, even if I'm not sure I'd bother with most of them if they weren't causing pylint to show errors. Given that apparently it does, though, I'm okay with it going through. (I'll just grumble quietly in my corner. :-)) Reviewed-by: David Gow <davidgow@google.com> -- David > Note: this patch only applies cleanly on top of https://lore.kernel.org/linux-kselftest/20220426173334.3871399-3-dlatypov@google.com > --- > tools/testing/kunit/kunit.py | 9 +++---- > tools/testing/kunit/kunit_config.py | 12 ++++----- > tools/testing/kunit/kunit_json.py | 5 +--- > tools/testing/kunit/kunit_kernel.py | 10 +++---- > tools/testing/kunit/kunit_parser.py | 37 ++++++++++++-------------- > tools/testing/kunit/kunit_tool_test.py | 10 ++++--- > tools/testing/kunit/run_checks.py | 2 +- > 7 files changed, 39 insertions(+), 46 deletions(-) > > diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py > index 6dc710d3996b..13bd72e47da8 100755 > --- a/tools/testing/kunit/kunit.py > +++ b/tools/testing/kunit/kunit.py > @@ -124,7 +124,7 @@ def _list_tests(linux: kunit_kernel.LinuxSourceTree, request: KunitExecRequest) > lines.pop() > > # Filter out any extraneous non-test output that might have gotten mixed in. > - return [l for l in lines if re.match('^[^\s.]+\.[^\s.]+$', l)] > + return [l for l in lines if re.match(r'^[^\s.]+\.[^\s.]+$', l)] > > def _suites_from_test_list(tests: List[str]) -> List[str]: > """Extracts all the suites from an ordered list of tests.""" > @@ -188,8 +188,7 @@ def exec_tests(linux: kunit_kernel.LinuxSourceTree, request: KunitExecRequest) - > def _map_to_overall_status(test_status: kunit_parser.TestStatus) -> KunitStatus: > if test_status in (kunit_parser.TestStatus.SUCCESS, kunit_parser.TestStatus.SKIPPED): > return KunitStatus.SUCCESS > - else: > - return KunitStatus.TEST_FAILURE > + return KunitStatus.TEST_FAILURE > > def parse_tests(request: KunitParseRequest, metadata: kunit_json.Metadata, input_data: Iterable[str]) -> Tuple[KunitResult, kunit_parser.Test]: > parse_start = time.time() > @@ -353,7 +352,7 @@ def add_exec_opts(parser) -> None: > 'a non-hermetic test, one that might pass/fail based on ' > 'what ran before it.', > type=str, > - choices=['suite', 'test']), > + choices=['suite', 'test']) > > def add_parse_opts(parser) -> None: > parser.add_argument('--raw_output', help='If set don\'t format output from kernel. ' > @@ -497,7 +496,7 @@ def main(argv, linux=None): > if result.status != KunitStatus.SUCCESS: > sys.exit(1) > elif cli_args.subcommand == 'parse': > - if cli_args.file == None: > + if cli_args.file is None: > sys.stdin.reconfigure(errors='backslashreplace') # pytype: disable=attribute-error > kunit_output = sys.stdin > else: > diff --git a/tools/testing/kunit/kunit_config.py b/tools/testing/kunit/kunit_config.py > index ca33e4b7bcc5..75a8dc1683d4 100644 > --- a/tools/testing/kunit/kunit_config.py > +++ b/tools/testing/kunit/kunit_config.py > @@ -20,16 +20,15 @@ class KconfigEntry: > > def __str__(self) -> str: > if self.value == 'n': > - return r'# CONFIG_%s is not set' % (self.name) > - else: > - return r'CONFIG_%s=%s' % (self.name, self.value) > + return f'# CONFIG_{self.name} is not set' > + return f'CONFIG_{self.name}={self.value}' > > > class KconfigParseError(Exception): > """Error parsing Kconfig defconfig or .config.""" > > > -class Kconfig(object): > +class Kconfig: > """Represents defconfig or .config specified using the Kconfig language.""" > > def __init__(self) -> None: > @@ -49,7 +48,7 @@ class Kconfig(object): > if a.value == 'n': > continue > return False > - elif a.value != b: > + if a.value != b: > return False > return True > > @@ -91,6 +90,5 @@ def parse_from_string(blob: str) -> Kconfig: > > if line[0] == '#': > continue > - else: > - raise KconfigParseError('Failed to parse: ' + line) > + raise KconfigParseError('Failed to parse: ' + line) > return kconfig > diff --git a/tools/testing/kunit/kunit_json.py b/tools/testing/kunit/kunit_json.py > index 1212423fe6bc..10ff65689dd8 100644 > --- a/tools/testing/kunit/kunit_json.py > +++ b/tools/testing/kunit/kunit_json.py > @@ -8,12 +8,9 @@ > > from dataclasses import dataclass > import json > -import os > - > -import kunit_parser > +from typing import Any, Dict > > from kunit_parser import Test, TestStatus > -from typing import Any, Dict > > @dataclass > class Metadata: > diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py > index 483f78e15ce9..93446a2b6414 100644 > --- a/tools/testing/kunit/kunit_kernel.py > +++ b/tools/testing/kunit/kunit_kernel.py > @@ -37,7 +37,7 @@ class BuildError(Exception): > """Represents an error trying to build the Linux kernel.""" > > > -class LinuxSourceTreeOperations(object): > +class LinuxSourceTreeOperations: > """An abstraction over command line operations performed on a source tree.""" > > def __init__(self, linux_arch: str, cross_compile: Optional[str]): > @@ -52,7 +52,7 @@ class LinuxSourceTreeOperations(object): > except subprocess.CalledProcessError as e: > raise ConfigError(e.output.decode()) > > - def make_arch_qemuconfig(self, kconfig: kunit_config.Kconfig) -> None: > + def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> None: > pass > > def make_allyesconfig(self, build_dir: str, make_options) -> None: > @@ -180,7 +180,7 @@ def get_source_tree_ops(arch: str, cross_compile: Optional[str]) -> LinuxSourceT > config_path = os.path.join(QEMU_CONFIGS_DIR, arch + '.py') > if arch == 'um': > return LinuxSourceTreeOperationsUml(cross_compile=cross_compile) > - elif os.path.isfile(config_path): > + if os.path.isfile(config_path): > return get_source_tree_ops_from_qemu_config(config_path, cross_compile)[1] > > options = [f[:-3] for f in os.listdir(QEMU_CONFIGS_DIR) if f.endswith('.py')] > @@ -211,7 +211,7 @@ def get_source_tree_ops_from_qemu_config(config_path: str, > return params.linux_arch, LinuxSourceTreeOperationsQemu( > params, cross_compile=cross_compile) > > -class LinuxSourceTree(object): > +class LinuxSourceTree: > """Represents a Linux kernel source tree with KUnit tests.""" > > def __init__( > @@ -366,6 +366,6 @@ class LinuxSourceTree(object): > waiter.join() > subprocess.call(['stty', 'sane']) > > - def signal_handler(self, sig, frame) -> None: > + def signal_handler(self, unused_sig, unused_frame) -> None: > logging.error('Build interruption occurred. Cleaning console.') > subprocess.call(['stty', 'sane']) > diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py > index d56d530fab24..5c90842d7017 100644 > --- a/tools/testing/kunit/kunit_parser.py > +++ b/tools/testing/kunit/kunit_parser.py > @@ -15,10 +15,9 @@ import sys > > import datetime > from enum import Enum, auto > -from functools import reduce > from typing import Iterable, Iterator, List, Optional, Tuple > > -class Test(object): > +class Test: > """ > A class to represent a test parsed from KTAP results. All KTAP > results within a test log are stored in a main Test object as > @@ -126,17 +125,16 @@ class TestCounts: > """ > if self.total() == 0: > return TestStatus.NO_TESTS > - elif self.crashed: > + if self.crashed: > # Crashes should take priority. > return TestStatus.TEST_CRASHED > - elif self.failed: > + if self.failed: > return TestStatus.FAILURE > - elif self.passed: > + if self.passed: > # No failures or crashes, looks good! > return TestStatus.SUCCESS > - else: > - # We have only skipped tests. > - return TestStatus.SKIPPED > + # We have only skipped tests. > + return TestStatus.SKIPPED > > def add_status(self, status: TestStatus) -> None: > """Increments the count for `status`.""" > @@ -381,7 +379,7 @@ def peek_test_name_match(lines: LineStream, test: Test) -> bool: > if not match: > return False > name = match.group(4) > - return (name == test.name) > + return name == test.name > > def parse_test_result(lines: LineStream, test: Test, > expected_num: int) -> bool: > @@ -553,17 +551,16 @@ def format_test_result(test: Test) -> str: > String containing formatted test result > """ > if test.status == TestStatus.SUCCESS: > - return (green('[PASSED] ') + test.name) > - elif test.status == TestStatus.SKIPPED: > - return (yellow('[SKIPPED] ') + test.name) > - elif test.status == TestStatus.NO_TESTS: > - return (yellow('[NO TESTS RUN] ') + test.name) > - elif test.status == TestStatus.TEST_CRASHED: > - print_log(test.log) > - return (red('[CRASHED] ') + test.name) > - else: > + return green('[PASSED] ') + test.name > + if test.status == TestStatus.SKIPPED: > + return yellow('[SKIPPED] ') + test.name > + if test.status == TestStatus.NO_TESTS: > + return yellow('[NO TESTS RUN] ') + test.name > + if test.status == TestStatus.TEST_CRASHED: > print_log(test.log) > - return (red('[FAILED] ') + test.name) > + return red('[CRASHED] ') + test.name > + print_log(test.log) > + return red('[FAILED] ') + test.name > > def print_test_result(test: Test) -> None: > """ > @@ -607,7 +604,7 @@ def print_summary_line(test: Test) -> None: > """ > if test.status == TestStatus.SUCCESS: > color = green > - elif test.status == TestStatus.SKIPPED or test.status == TestStatus.NO_TESTS: > + elif test.status in (TestStatus.SKIPPED, TestStatus.NO_TESTS): > color = yellow > else: > color = red > diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py > index 1200e451c418..d2ab24f736f8 100755 > --- a/tools/testing/kunit/kunit_tool_test.py > +++ b/tools/testing/kunit/kunit_tool_test.py > @@ -251,8 +251,8 @@ class KUnitParserTest(unittest.TestCase): > > def test_ignores_hyphen(self): > hyphen_log = test_data_path('test_strip_hyphen.log') > - file = open(hyphen_log) > - result = kunit_parser.parse_run_tests(file.readlines()) > + with open(hyphen_log) as file: > + result = kunit_parser.parse_run_tests(file.readlines()) > > # A skipped test does not fail the whole suite. > self.assertEqual( > @@ -347,7 +347,7 @@ class LineStreamTest(unittest.TestCase): > called_times = 0 > def generator(): > nonlocal called_times > - for i in range(1,5): > + for _ in range(1,5): > called_times += 1 > yield called_times, str(called_times) > > @@ -553,7 +553,8 @@ class KUnitMainTest(unittest.TestCase): > def test_exec_no_tests(self): > self.linux_source_mock.run_kernel = mock.Mock(return_value=['TAP version 14', '1..0']) > with self.assertRaises(SystemExit) as e: > - kunit.main(['run'], self.linux_source_mock) > + kunit.main(['run'], self.linux_source_mock) > + self.assertEqual(e.exception.code, 1) > self.linux_source_mock.run_kernel.assert_called_once_with( > args=None, build_dir='.kunit', filter_glob='', timeout=300) > self.print_mock.assert_any_call(StrContains(' 0 tests run!')) > @@ -588,6 +589,7 @@ class KUnitMainTest(unittest.TestCase): > self.linux_source_mock.run_kernel = mock.Mock(return_value=[]) > with self.assertRaises(SystemExit) as e: > kunit.main(['run', '--raw_output=invalid'], self.linux_source_mock) > + self.assertNotEqual(e.exception.code, 0) > > def test_run_raw_output_does_not_take_positional_args(self): > # --raw_output is a string flag, but we don't want it to consume > diff --git a/tools/testing/kunit/run_checks.py b/tools/testing/kunit/run_checks.py > index 13d854afca9d..066e6f938f6d 100755 > --- a/tools/testing/kunit/run_checks.py > +++ b/tools/testing/kunit/run_checks.py > @@ -14,7 +14,7 @@ import shutil > import subprocess > import sys > import textwrap > -from typing import Dict, List, Sequence, Tuple > +from typing import Dict, List, Sequence > > ABS_TOOL_PATH = os.path.abspath(os.path.dirname(__file__)) > TIMEOUT = datetime.timedelta(minutes=5).total_seconds() > -- > 2.36.0.512.ge40c2bad7a-goog >
On Mon, May 9, 2022 at 11:22 PM David Gow <davidgow@google.com> wrote: > > On Tue, May 10, 2022 at 4:49 AM Daniel Latypov <dlatypov@google.com> wrote: > > > > This primarily comes from running pylint over kunit tool code and > > ignoring some warnings we don't care about. > > If we ever got a fully clean setup, we could add this to run_checks.py, > > but we're not there yet. > > > > Fix things like > > * Drop unused imports > > * check `is None`, not `== None` (see PEP 8) > > * remove redundant parens around returns > > * remove redundant `else` / convert `elif` to `if` where appropriate > > Personally, I find the explicit 'elif' much more readable in most of > these cases, but if we're annoying a linter, I guess we should change > them... Same, some of them felt a tad more readable, but using `if` is a bit more explicit about the actual control flow. For short branches, like most of the ones here, they don't make too much of a difference, but for longer blocks of code, this can help. E.g. if one sees elif check2(): do_thing2() one might think they can tack on a do_cleanup() and have it run for all branches, if they're not careful. > > > * rename make_arch_qemuconfig() param to base_kunitconfig (this is the > > name used in the subclass, and it's a better one) > > * kunit_tool_test: check the exit code for SystemExit (could be 0) > > > > Signed-off-by: Daniel Latypov <dlatypov@google.com> > > --- > > All of these changes seem correct to me, even if I'm not sure I'd > bother with most of them if they weren't causing pylint to show > errors. > > Given that apparently it does, though, I'm okay with it going through. > (I'll just grumble quietly in my corner. :-)) To be fair, we could ignore more of these warnings. If we ever try to get the code clean wrt linter warnings, we'd already need to tweak the settings. But I think I've taken care of most of the reasonable warnings in this patch.
On Mon, May 9, 2022 at 4:49 PM Daniel Latypov <dlatypov@google.com> wrote: > > This primarily comes from running pylint over kunit tool code and > ignoring some warnings we don't care about. > If we ever got a fully clean setup, we could add this to run_checks.py, > but we're not there yet. > > Fix things like > * Drop unused imports > * check `is None`, not `== None` (see PEP 8) > * remove redundant parens around returns > * remove redundant `else` / convert `elif` to `if` where appropriate > * rename make_arch_qemuconfig() param to base_kunitconfig (this is the > name used in the subclass, and it's a better one) > * kunit_tool_test: check the exit code for SystemExit (could be 0) > > Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py index 6dc710d3996b..13bd72e47da8 100755 --- a/tools/testing/kunit/kunit.py +++ b/tools/testing/kunit/kunit.py @@ -124,7 +124,7 @@ def _list_tests(linux: kunit_kernel.LinuxSourceTree, request: KunitExecRequest) lines.pop() # Filter out any extraneous non-test output that might have gotten mixed in. - return [l for l in lines if re.match('^[^\s.]+\.[^\s.]+$', l)] + return [l for l in lines if re.match(r'^[^\s.]+\.[^\s.]+$', l)] def _suites_from_test_list(tests: List[str]) -> List[str]: """Extracts all the suites from an ordered list of tests.""" @@ -188,8 +188,7 @@ def exec_tests(linux: kunit_kernel.LinuxSourceTree, request: KunitExecRequest) - def _map_to_overall_status(test_status: kunit_parser.TestStatus) -> KunitStatus: if test_status in (kunit_parser.TestStatus.SUCCESS, kunit_parser.TestStatus.SKIPPED): return KunitStatus.SUCCESS - else: - return KunitStatus.TEST_FAILURE + return KunitStatus.TEST_FAILURE def parse_tests(request: KunitParseRequest, metadata: kunit_json.Metadata, input_data: Iterable[str]) -> Tuple[KunitResult, kunit_parser.Test]: parse_start = time.time() @@ -353,7 +352,7 @@ def add_exec_opts(parser) -> None: 'a non-hermetic test, one that might pass/fail based on ' 'what ran before it.', type=str, - choices=['suite', 'test']), + choices=['suite', 'test']) def add_parse_opts(parser) -> None: parser.add_argument('--raw_output', help='If set don\'t format output from kernel. ' @@ -497,7 +496,7 @@ def main(argv, linux=None): if result.status != KunitStatus.SUCCESS: sys.exit(1) elif cli_args.subcommand == 'parse': - if cli_args.file == None: + if cli_args.file is None: sys.stdin.reconfigure(errors='backslashreplace') # pytype: disable=attribute-error kunit_output = sys.stdin else: diff --git a/tools/testing/kunit/kunit_config.py b/tools/testing/kunit/kunit_config.py index ca33e4b7bcc5..75a8dc1683d4 100644 --- a/tools/testing/kunit/kunit_config.py +++ b/tools/testing/kunit/kunit_config.py @@ -20,16 +20,15 @@ class KconfigEntry: def __str__(self) -> str: if self.value == 'n': - return r'# CONFIG_%s is not set' % (self.name) - else: - return r'CONFIG_%s=%s' % (self.name, self.value) + return f'# CONFIG_{self.name} is not set' + return f'CONFIG_{self.name}={self.value}' class KconfigParseError(Exception): """Error parsing Kconfig defconfig or .config.""" -class Kconfig(object): +class Kconfig: """Represents defconfig or .config specified using the Kconfig language.""" def __init__(self) -> None: @@ -49,7 +48,7 @@ class Kconfig(object): if a.value == 'n': continue return False - elif a.value != b: + if a.value != b: return False return True @@ -91,6 +90,5 @@ def parse_from_string(blob: str) -> Kconfig: if line[0] == '#': continue - else: - raise KconfigParseError('Failed to parse: ' + line) + raise KconfigParseError('Failed to parse: ' + line) return kconfig diff --git a/tools/testing/kunit/kunit_json.py b/tools/testing/kunit/kunit_json.py index 1212423fe6bc..10ff65689dd8 100644 --- a/tools/testing/kunit/kunit_json.py +++ b/tools/testing/kunit/kunit_json.py @@ -8,12 +8,9 @@ from dataclasses import dataclass import json -import os - -import kunit_parser +from typing import Any, Dict from kunit_parser import Test, TestStatus -from typing import Any, Dict @dataclass class Metadata: diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 483f78e15ce9..93446a2b6414 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -37,7 +37,7 @@ class BuildError(Exception): """Represents an error trying to build the Linux kernel.""" -class LinuxSourceTreeOperations(object): +class LinuxSourceTreeOperations: """An abstraction over command line operations performed on a source tree.""" def __init__(self, linux_arch: str, cross_compile: Optional[str]): @@ -52,7 +52,7 @@ class LinuxSourceTreeOperations(object): except subprocess.CalledProcessError as e: raise ConfigError(e.output.decode()) - def make_arch_qemuconfig(self, kconfig: kunit_config.Kconfig) -> None: + def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> None: pass def make_allyesconfig(self, build_dir: str, make_options) -> None: @@ -180,7 +180,7 @@ def get_source_tree_ops(arch: str, cross_compile: Optional[str]) -> LinuxSourceT config_path = os.path.join(QEMU_CONFIGS_DIR, arch + '.py') if arch == 'um': return LinuxSourceTreeOperationsUml(cross_compile=cross_compile) - elif os.path.isfile(config_path): + if os.path.isfile(config_path): return get_source_tree_ops_from_qemu_config(config_path, cross_compile)[1] options = [f[:-3] for f in os.listdir(QEMU_CONFIGS_DIR) if f.endswith('.py')] @@ -211,7 +211,7 @@ def get_source_tree_ops_from_qemu_config(config_path: str, return params.linux_arch, LinuxSourceTreeOperationsQemu( params, cross_compile=cross_compile) -class LinuxSourceTree(object): +class LinuxSourceTree: """Represents a Linux kernel source tree with KUnit tests.""" def __init__( @@ -366,6 +366,6 @@ class LinuxSourceTree(object): waiter.join() subprocess.call(['stty', 'sane']) - def signal_handler(self, sig, frame) -> None: + def signal_handler(self, unused_sig, unused_frame) -> None: logging.error('Build interruption occurred. Cleaning console.') subprocess.call(['stty', 'sane']) diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py index d56d530fab24..5c90842d7017 100644 --- a/tools/testing/kunit/kunit_parser.py +++ b/tools/testing/kunit/kunit_parser.py @@ -15,10 +15,9 @@ import sys import datetime from enum import Enum, auto -from functools import reduce from typing import Iterable, Iterator, List, Optional, Tuple -class Test(object): +class Test: """ A class to represent a test parsed from KTAP results. All KTAP results within a test log are stored in a main Test object as @@ -126,17 +125,16 @@ class TestCounts: """ if self.total() == 0: return TestStatus.NO_TESTS - elif self.crashed: + if self.crashed: # Crashes should take priority. return TestStatus.TEST_CRASHED - elif self.failed: + if self.failed: return TestStatus.FAILURE - elif self.passed: + if self.passed: # No failures or crashes, looks good! return TestStatus.SUCCESS - else: - # We have only skipped tests. - return TestStatus.SKIPPED + # We have only skipped tests. + return TestStatus.SKIPPED def add_status(self, status: TestStatus) -> None: """Increments the count for `status`.""" @@ -381,7 +379,7 @@ def peek_test_name_match(lines: LineStream, test: Test) -> bool: if not match: return False name = match.group(4) - return (name == test.name) + return name == test.name def parse_test_result(lines: LineStream, test: Test, expected_num: int) -> bool: @@ -553,17 +551,16 @@ def format_test_result(test: Test) -> str: String containing formatted test result """ if test.status == TestStatus.SUCCESS: - return (green('[PASSED] ') + test.name) - elif test.status == TestStatus.SKIPPED: - return (yellow('[SKIPPED] ') + test.name) - elif test.status == TestStatus.NO_TESTS: - return (yellow('[NO TESTS RUN] ') + test.name) - elif test.status == TestStatus.TEST_CRASHED: - print_log(test.log) - return (red('[CRASHED] ') + test.name) - else: + return green('[PASSED] ') + test.name + if test.status == TestStatus.SKIPPED: + return yellow('[SKIPPED] ') + test.name + if test.status == TestStatus.NO_TESTS: + return yellow('[NO TESTS RUN] ') + test.name + if test.status == TestStatus.TEST_CRASHED: print_log(test.log) - return (red('[FAILED] ') + test.name) + return red('[CRASHED] ') + test.name + print_log(test.log) + return red('[FAILED] ') + test.name def print_test_result(test: Test) -> None: """ @@ -607,7 +604,7 @@ def print_summary_line(test: Test) -> None: """ if test.status == TestStatus.SUCCESS: color = green - elif test.status == TestStatus.SKIPPED or test.status == TestStatus.NO_TESTS: + elif test.status in (TestStatus.SKIPPED, TestStatus.NO_TESTS): color = yellow else: color = red diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 1200e451c418..d2ab24f736f8 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -251,8 +251,8 @@ class KUnitParserTest(unittest.TestCase): def test_ignores_hyphen(self): hyphen_log = test_data_path('test_strip_hyphen.log') - file = open(hyphen_log) - result = kunit_parser.parse_run_tests(file.readlines()) + with open(hyphen_log) as file: + result = kunit_parser.parse_run_tests(file.readlines()) # A skipped test does not fail the whole suite. self.assertEqual( @@ -347,7 +347,7 @@ class LineStreamTest(unittest.TestCase): called_times = 0 def generator(): nonlocal called_times - for i in range(1,5): + for _ in range(1,5): called_times += 1 yield called_times, str(called_times) @@ -553,7 +553,8 @@ class KUnitMainTest(unittest.TestCase): def test_exec_no_tests(self): self.linux_source_mock.run_kernel = mock.Mock(return_value=['TAP version 14', '1..0']) with self.assertRaises(SystemExit) as e: - kunit.main(['run'], self.linux_source_mock) + kunit.main(['run'], self.linux_source_mock) + self.assertEqual(e.exception.code, 1) self.linux_source_mock.run_kernel.assert_called_once_with( args=None, build_dir='.kunit', filter_glob='', timeout=300) self.print_mock.assert_any_call(StrContains(' 0 tests run!')) @@ -588,6 +589,7 @@ class KUnitMainTest(unittest.TestCase): self.linux_source_mock.run_kernel = mock.Mock(return_value=[]) with self.assertRaises(SystemExit) as e: kunit.main(['run', '--raw_output=invalid'], self.linux_source_mock) + self.assertNotEqual(e.exception.code, 0) def test_run_raw_output_does_not_take_positional_args(self): # --raw_output is a string flag, but we don't want it to consume diff --git a/tools/testing/kunit/run_checks.py b/tools/testing/kunit/run_checks.py index 13d854afca9d..066e6f938f6d 100755 --- a/tools/testing/kunit/run_checks.py +++ b/tools/testing/kunit/run_checks.py @@ -14,7 +14,7 @@ import shutil import subprocess import sys import textwrap -from typing import Dict, List, Sequence, Tuple +from typing import Dict, List, Sequence ABS_TOOL_PATH = os.path.abspath(os.path.dirname(__file__)) TIMEOUT = datetime.timedelta(minutes=5).total_seconds()
This primarily comes from running pylint over kunit tool code and ignoring some warnings we don't care about. If we ever got a fully clean setup, we could add this to run_checks.py, but we're not there yet. Fix things like * Drop unused imports * check `is None`, not `== None` (see PEP 8) * remove redundant parens around returns * remove redundant `else` / convert `elif` to `if` where appropriate * rename make_arch_qemuconfig() param to base_kunitconfig (this is the name used in the subclass, and it's a better one) * kunit_tool_test: check the exit code for SystemExit (could be 0) Signed-off-by: Daniel Latypov <dlatypov@google.com> --- Note: this patch only applies cleanly on top of https://lore.kernel.org/linux-kselftest/20220426173334.3871399-3-dlatypov@google.com --- tools/testing/kunit/kunit.py | 9 +++---- tools/testing/kunit/kunit_config.py | 12 ++++----- tools/testing/kunit/kunit_json.py | 5 +--- tools/testing/kunit/kunit_kernel.py | 10 +++---- tools/testing/kunit/kunit_parser.py | 37 ++++++++++++-------------- tools/testing/kunit/kunit_tool_test.py | 10 ++++--- tools/testing/kunit/run_checks.py | 2 +- 7 files changed, 39 insertions(+), 46 deletions(-)