@@ -264,60 +264,60 @@ setup_xfrm()
ip -netns host1 xfrm state add src ${HOST1_4} dst ${HOST2_4} \
proto esp spi ${SPI_1} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
- auth-trunc 'hmac(md5)' ${AUTH_1} 96 \
- enc 'cbc(des3_ede)' ${ENC_1} \
+ auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \
+ enc 'cbc(aes)' ${ENC_1} \
sel src ${h1_4} dst ${h2_4} ${devarg}
ip -netns host2 xfrm state add src ${HOST1_4} dst ${HOST2_4} \
proto esp spi ${SPI_1} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
- auth-trunc 'hmac(md5)' ${AUTH_1} 96 \
- enc 'cbc(des3_ede)' ${ENC_1} \
+ auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \
+ enc 'cbc(aes)' ${ENC_1} \
sel src ${h1_4} dst ${h2_4}
ip -netns host1 xfrm state add src ${HOST2_4} dst ${HOST1_4} \
proto esp spi ${SPI_2} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
- auth-trunc 'hmac(md5)' ${AUTH_2} 96 \
- enc 'cbc(des3_ede)' ${ENC_2} \
+ auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \
+ enc 'cbc(aes)' ${ENC_2} \
sel src ${h2_4} dst ${h1_4} ${devarg}
ip -netns host2 xfrm state add src ${HOST2_4} dst ${HOST1_4} \
proto esp spi ${SPI_2} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
- auth-trunc 'hmac(md5)' ${AUTH_2} 96 \
- enc 'cbc(des3_ede)' ${ENC_2} \
+ auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \
+ enc 'cbc(aes)' ${ENC_2} \
sel src ${h2_4} dst ${h1_4}
ip -6 -netns host1 xfrm state add src ${HOST1_6} dst ${HOST2_6} \
proto esp spi ${SPI_1} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
- auth-trunc 'hmac(md5)' ${AUTH_1} 96 \
- enc 'cbc(des3_ede)' ${ENC_1} \
+ auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \
+ enc 'cbc(aes)' ${ENC_1} \
sel src ${h1_6} dst ${h2_6} ${devarg}
ip -6 -netns host2 xfrm state add src ${HOST1_6} dst ${HOST2_6} \
proto esp spi ${SPI_1} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
- auth-trunc 'hmac(md5)' ${AUTH_1} 96 \
- enc 'cbc(des3_ede)' ${ENC_1} \
+ auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \
+ enc 'cbc(aes)' ${ENC_1} \
sel src ${h1_6} dst ${h2_6}
ip -6 -netns host1 xfrm state add src ${HOST2_6} dst ${HOST1_6} \
proto esp spi ${SPI_2} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
- auth-trunc 'hmac(md5)' ${AUTH_2} 96 \
- enc 'cbc(des3_ede)' ${ENC_2} \
+ auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \
+ enc 'cbc(aes)' ${ENC_2} \
sel src ${h2_6} dst ${h1_6} ${devarg}
ip -6 -netns host2 xfrm state add src ${HOST2_6} dst ${HOST1_6} \
proto esp spi ${SPI_2} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
- auth-trunc 'hmac(md5)' ${AUTH_2} 96 \
- enc 'cbc(des3_ede)' ${ENC_2} \
+ auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \
+ enc 'cbc(aes)' ${ENC_2} \
sel src ${h2_6} dst ${h1_6}
}
The vrf-xfrm-tests tests use the hmac(md5) and cbc(des3_ede) algorithms for performing authentication and encryption, respectively. This causes the tests to fail when fips=1 is set, since these algorithms are not allowed in FIPS mode. Therefore, switch from hmac(md5) and cbc(des3_ede) to hmac(sha1) and cbc(aes), which are FIPS compliant. Fixes: 3f251d741150 ("selftests: Add tests for vrf and xfrms") Signed-off-by: Magali Lemes <magali.lemes@canonical.com> --- tools/testing/selftests/net/vrf-xfrm-tests.sh | 32 +++++++++---------- 1 file changed, 16 insertions(+), 16 deletions(-)