@@ -133,3 +133,23 @@ RISC-V Linux Kernel SV57
ffffffff00000000 | -4 GB | ffffffff7fffffff | 2 GB | modules, BPF
ffffffff80000000 | -2 GB | ffffffffffffffff | 2 GB | kernel
__________________|____________|__________________|_________|____________________________________________________________
+
+
+Userspace VAs
+--------------------
+To maintain compatibility with software that relies on the VA space
+with a maximum of 39-bits, the kernel will, by default, return virtual
+return virtual addresses to userspace from a 39-bit range.
+
+Software can "opt-in" to receiving VAs from other VA space by providing
+a hint address to mmap. A call to mmap is guaranteed to return an address
+that will not override the unset left-aligned bits in the hint address,
+unless there is no space left in the address space. If there is no space
+available in the requested address space, an address in the next smallest
+available address space will be returned.
+
+For example, in order to obtain 48-bit VA space, a hint address greater than
+:code:`1 << 38` must be provided. Note that this is 38 due to sv39 userspace
+ending at :code:`1 << 38` with the addresses beyond this and up to :code:`1 << 39`
+being reserved for the kernel. Similarly, to obtain 57-bit VA space addresses, a
+hint address greater than or equal to :code:`1 << 47` must be provided.
@@ -841,14 +841,16 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
* Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32.
* Note that PGDIR_SIZE must evenly divide TASK_SIZE.
* Task size is:
- * - 0x9fc00000 (~2.5GB) for RV32.
- * - 0x4000000000 ( 256GB) for RV64 using SV39 mmu
- * - 0x800000000000 ( 128TB) for RV64 using SV48 mmu
+ * - 0x9fc00000 (~2.5GB) for RV32.
+ * - 0x4000000000 ( 256GB) for RV64 using SV39 mmu
+ * - 0x800000000000 ( 128TB) for RV64 using SV48 mmu
+ * - 0x100000000000000 ( 64PB) for RV64 using SV57 mmu
*
* Note that PGDIR_SIZE must evenly divide TASK_SIZE since "RISC-V
* Instruction Set Manual Volume II: Privileged Architecture" states that
* "load and store effective addresses, which are 64bits, must have bits
* 63–48 all equal to bit 47, or else a page-fault exception will occur."
+ * Similarly for SV57, bits 63–57 must be equal to bit 56.
*/
#ifdef CONFIG_64BIT
#define TASK_SIZE_64 (PGDIR_SIZE * PTRS_PER_PGD / 2)
@@ -5,7 +5,7 @@
ARCH ?= $(shell uname -m 2>/dev/null || echo not)
ifneq (,$(filter $(ARCH),riscv))
-RISCV_SUBTARGETS ?= hwprobe
+RISCV_SUBTARGETS ?= hwprobe mm
else
RISCV_SUBTARGETS :=
endif
new file mode 100644
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2019 ARM Limited
+# Originally tools/testing/selftests/arm64/signal
+
+# Additional include paths needed by kselftest.h and local headers
+CFLAGS += -D_GNU_SOURCE -std=gnu99 -I.
+
+SRCS := $(filter-out testcases/testcases.c,$(wildcard testcases/*.c))
+PROGS := $(patsubst %.c,%,$(SRCS))
+
+# Generated binaries to be installed by top KSFT script
+TEST_GEN_PROGS := $(notdir $(PROGS))
+
+# Get Kernel headers installed and use them.
+
+# Including KSFT lib.mk here will also mangle the TEST_GEN_PROGS list
+# to account for any OUTPUT target-dirs optionally provided by
+# the toplevel makefile
+include ../../lib.mk
+
+$(TEST_GEN_PROGS): $(PROGS)
+ cp $(PROGS) $(OUTPUT)/
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <sys/mman.h>
+#include "../../kselftest_harness.h"
+
+TEST(sv57_test)
+{
+ // Only works on 64 bit
+ #if __riscv_xlen == 64
+ // Place all of the hint addresses on the boundaries of mmap
+ // sv39, sv48, sv57
+ // User addresses end at 1<<38, 1<<47, 1<<56 respectively
+ void *on_37_bits = (void *) (1UL << 37);
+ void *on_38_bits = (void *) (1UL << 38);
+ void *on_46_bits = (void *) (1UL << 46);
+ void *on_47_bits = (void *) (1UL << 47);
+ void *on_55_bits = (void *) (1UL << 55);
+ void *on_56_bits = (void *) (1UL << 56);
+
+ int prot = PROT_READ | PROT_WRITE;
+ int flags = MAP_PRIVATE | MAP_ANONYMOUS;
+
+ int *no_hint = mmap(NULL, 5*sizeof(int), prot, flags, 0, 0);
+ int *on_37_addr = mmap(on_37_bits, 5*sizeof(int), prot, flags, 0, 0);
+ int *on_38_addr = mmap(on_38_bits, 5*sizeof(int), prot, flags, 0, 0);
+ int *on_46_addr = mmap(on_46_bits, 5*sizeof(int), prot, flags, 0, 0);
+ int *on_47_addr = mmap(on_47_bits, 5*sizeof(int), prot, flags, 0, 0);
+ int *on_55_addr = mmap(on_55_bits, 5*sizeof(int), prot, flags, 0, 0);
+ int *on_56_addr = mmap(on_56_bits, 5*sizeof(int), prot, flags, 0, 0);
+
+ EXPECT_NE(no_hint, MAP_FAILED);
+ EXPECT_NE(on_37_addr, MAP_FAILED);
+ EXPECT_NE(on_38_addr, MAP_FAILED);
+ EXPECT_NE(on_46_addr, MAP_FAILED);
+ EXPECT_NE(on_47_addr, MAP_FAILED);
+ EXPECT_NE(on_55_addr, MAP_FAILED);
+ EXPECT_NE(on_56_addr, MAP_FAILED);
+
+ EXPECT_LT((unsigned long) no_hint, 1UL << 38);
+ EXPECT_LT((unsigned long) on_37_addr, 1UL << 38);
+ EXPECT_LT((unsigned long) on_38_addr, 1UL << 38);
+ EXPECT_LT((unsigned long) on_46_addr, 1UL << 38);
+ EXPECT_LT((unsigned long) on_47_addr, 1UL << 47);
+ EXPECT_LT((unsigned long) on_55_addr, 1UL << 47);
+ EXPECT_LT((unsigned long) on_56_addr, 1UL << 57);
+ #else
+ #endif
+}
+
+TEST_HARNESS_MAIN
Add documentation explaining the behavior of mmap. Include a simple test that ensures that mmap returns an address less than the hint address while there are still addresses available. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> --- Documentation/riscv/vm-layout.rst | 20 ++++++++ arch/riscv/include/asm/pgtable.h | 8 +-- tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/mm/Makefile | 22 +++++++++ .../selftests/riscv/mm/testcases/mmap.c | 49 +++++++++++++++++++ 5 files changed, 97 insertions(+), 4 deletions(-) create mode 100644 tools/testing/selftests/riscv/mm/Makefile create mode 100644 tools/testing/selftests/riscv/mm/testcases/mmap.c