diff mbox series

[v6,6/7] selftests: mm: Add a test for remapping within a range

Message ID 20230903151328.2981432-7-joel@joelfernandes.org (mailing list archive)
State Accepted
Commit 85a22845b094ec6eeb7c24c692f2290e56d9f07c
Headers show
Series Optimize mremap during mutual alignment within PMD | expand

Commit Message

Joel Fernandes Sept. 3, 2023, 3:13 p.m. UTC
Move a block of memory within a memory range. Any alignment optimization
on the source address may cause corruption. Verify using kselftest that
it works. I have also verified with tracing that such optimization does
not happen due to this check in can_align_down():

if (!for_stack && vma->vm_start != addr_to_align)
	return false;

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
---
 tools/testing/selftests/mm/mremap_test.c | 79 +++++++++++++++++++++++-
 1 file changed, 78 insertions(+), 1 deletion(-)

Comments

Lorenzo Stoakes Sept. 5, 2023, 6:48 a.m. UTC | #1
On Sun, Sep 03, 2023 at 03:13:27PM +0000, Joel Fernandes (Google) wrote:
> Move a block of memory within a memory range. Any alignment optimization
> on the source address may cause corruption. Verify using kselftest that
> it works. I have also verified with tracing that such optimization does
> not happen due to this check in can_align_down():
>
> if (!for_stack && vma->vm_start != addr_to_align)
> 	return false;
>
> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
> ---
>  tools/testing/selftests/mm/mremap_test.c | 79 +++++++++++++++++++++++-
>  1 file changed, 78 insertions(+), 1 deletion(-)
>
> diff --git a/tools/testing/selftests/mm/mremap_test.c b/tools/testing/selftests/mm/mremap_test.c
> index d7366074e2a8..12a095457f4c 100644
> --- a/tools/testing/selftests/mm/mremap_test.c
> +++ b/tools/testing/selftests/mm/mremap_test.c
> @@ -23,6 +23,7 @@
>  #define VALIDATION_NO_THRESHOLD 0	/* Verify the entire region */
>
>  #define MIN(X, Y) ((X) < (Y) ? (X) : (Y))
> +#define SIZE_MB(m) ((size_t)m * (1024 * 1024))
>
>  struct config {
>  	unsigned long long src_alignment;
> @@ -226,6 +227,79 @@ static void mremap_expand_merge_offset(FILE *maps_fp, unsigned long page_size)
>  		ksft_test_result_fail("%s\n", test_name);
>  }
>
> +/*
> + * Verify that an mremap within a range does not cause corruption
> + * of unrelated part of range.
> + *
> + * Consider the following range which is 2MB aligned and is
> + * a part of a larger 20MB range which is not shown. Each
> + * character is 256KB below making the source and destination
> + * 2MB each. The lower case letters are moved (s to d) and the
> + * upper case letters are not moved. The below test verifies
> + * that the upper case S letters are not corrupted by the
> + * adjacent mremap.
> + *
> + * |DDDDddddSSSSssss|
> + */
> +static void mremap_move_within_range(char pattern_seed)
> +{
> +	char *test_name = "mremap mremap move within range";
> +	void *src, *dest;
> +	int i, success = 1;
> +
> +	size_t size = SIZE_MB(20);
> +	void *ptr = mmap(NULL, size, PROT_READ | PROT_WRITE,
> +			 MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
> +	if (ptr == MAP_FAILED) {
> +		perror("mmap");
> +		success = 0;
> +		goto out;
> +	}
> +	memset(ptr, 0, size);
> +
> +	src = ptr + SIZE_MB(6);
> +	src = (void *)((unsigned long)src & ~(SIZE_MB(2) - 1));
> +
> +	/* Set byte pattern for source block. */
> +	srand(pattern_seed);
> +	for (i = 0; i < SIZE_MB(2); i++) {
> +		((char *)src)[i] = (char) rand();
> +	}
> +
> +	dest = src - SIZE_MB(2);
> +
> +	void *new_ptr = mremap(src + SIZE_MB(1), SIZE_MB(1), SIZE_MB(1),
> +						   MREMAP_MAYMOVE | MREMAP_FIXED, dest + SIZE_MB(1));
> +	if (new_ptr == MAP_FAILED) {
> +		perror("mremap");
> +		success = 0;
> +		goto out;
> +	}
> +
> +	/* Verify byte pattern after remapping */
> +	srand(pattern_seed);
> +	for (i = 0; i < SIZE_MB(1); i++) {
> +		char c = (char) rand();
> +
> +		if (((char *)src)[i] != c) {
> +			ksft_print_msg("Data at src at %d got corrupted due to unrelated mremap\n",
> +				       i);
> +			ksft_print_msg("Expected: %#x\t Got: %#x\n", c & 0xff,
> +					((char *) src)[i] & 0xff);
> +			success = 0;
> +		}
> +	}
> +
> +out:
> +	if (munmap(ptr, size) == -1)
> +		perror("munmap");
> +
> +	if (success)
> +		ksft_test_result_pass("%s\n", test_name);
> +	else
> +		ksft_test_result_fail("%s\n", test_name);
> +}
> +
>  /*
>   * Returns the start address of the mapping on success, else returns
>   * NULL on failure.
> @@ -491,6 +565,7 @@ int main(int argc, char **argv)
>  	unsigned int threshold_mb = VALIDATION_DEFAULT_THRESHOLD;
>  	unsigned int pattern_seed;
>  	int num_expand_tests = 2;
> +	int num_misc_tests = 1;
>  	struct test test_cases[MAX_TEST] = {};
>  	struct test perf_test_cases[MAX_PERF_TEST];
>  	int page_size;
> @@ -572,7 +647,7 @@ int main(int argc, char **argv)
>  				(threshold_mb * _1MB >= _1GB);
>
>  	ksft_set_plan(ARRAY_SIZE(test_cases) + (run_perf_tests ?
> -		      ARRAY_SIZE(perf_test_cases) : 0) + num_expand_tests);
> +		      ARRAY_SIZE(perf_test_cases) : 0) + num_expand_tests + num_misc_tests);
>
>  	for (i = 0; i < ARRAY_SIZE(test_cases); i++)
>  		run_mremap_test_case(test_cases[i], &failures, threshold_mb,
> @@ -590,6 +665,8 @@ int main(int argc, char **argv)
>
>  	fclose(maps_fp);
>
> +	mremap_move_within_range(pattern_seed);
> +
>  	if (run_perf_tests) {
>  		ksft_print_msg("\n%s\n",
>  		 "mremap HAVE_MOVE_PMD/PUD optimization time comparison for 1GB region:");
> --
> 2.42.0.283.g2d96d420d3-goog
>

Looks good to me, nice series in general!

Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
diff mbox series

Patch

diff --git a/tools/testing/selftests/mm/mremap_test.c b/tools/testing/selftests/mm/mremap_test.c
index d7366074e2a8..12a095457f4c 100644
--- a/tools/testing/selftests/mm/mremap_test.c
+++ b/tools/testing/selftests/mm/mremap_test.c
@@ -23,6 +23,7 @@ 
 #define VALIDATION_NO_THRESHOLD 0	/* Verify the entire region */
 
 #define MIN(X, Y) ((X) < (Y) ? (X) : (Y))
+#define SIZE_MB(m) ((size_t)m * (1024 * 1024))
 
 struct config {
 	unsigned long long src_alignment;
@@ -226,6 +227,79 @@  static void mremap_expand_merge_offset(FILE *maps_fp, unsigned long page_size)
 		ksft_test_result_fail("%s\n", test_name);
 }
 
+/*
+ * Verify that an mremap within a range does not cause corruption
+ * of unrelated part of range.
+ *
+ * Consider the following range which is 2MB aligned and is
+ * a part of a larger 20MB range which is not shown. Each
+ * character is 256KB below making the source and destination
+ * 2MB each. The lower case letters are moved (s to d) and the
+ * upper case letters are not moved. The below test verifies
+ * that the upper case S letters are not corrupted by the
+ * adjacent mremap.
+ *
+ * |DDDDddddSSSSssss|
+ */
+static void mremap_move_within_range(char pattern_seed)
+{
+	char *test_name = "mremap mremap move within range";
+	void *src, *dest;
+	int i, success = 1;
+
+	size_t size = SIZE_MB(20);
+	void *ptr = mmap(NULL, size, PROT_READ | PROT_WRITE,
+			 MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+	if (ptr == MAP_FAILED) {
+		perror("mmap");
+		success = 0;
+		goto out;
+	}
+	memset(ptr, 0, size);
+
+	src = ptr + SIZE_MB(6);
+	src = (void *)((unsigned long)src & ~(SIZE_MB(2) - 1));
+
+	/* Set byte pattern for source block. */
+	srand(pattern_seed);
+	for (i = 0; i < SIZE_MB(2); i++) {
+		((char *)src)[i] = (char) rand();
+	}
+
+	dest = src - SIZE_MB(2);
+
+	void *new_ptr = mremap(src + SIZE_MB(1), SIZE_MB(1), SIZE_MB(1),
+						   MREMAP_MAYMOVE | MREMAP_FIXED, dest + SIZE_MB(1));
+	if (new_ptr == MAP_FAILED) {
+		perror("mremap");
+		success = 0;
+		goto out;
+	}
+
+	/* Verify byte pattern after remapping */
+	srand(pattern_seed);
+	for (i = 0; i < SIZE_MB(1); i++) {
+		char c = (char) rand();
+
+		if (((char *)src)[i] != c) {
+			ksft_print_msg("Data at src at %d got corrupted due to unrelated mremap\n",
+				       i);
+			ksft_print_msg("Expected: %#x\t Got: %#x\n", c & 0xff,
+					((char *) src)[i] & 0xff);
+			success = 0;
+		}
+	}
+
+out:
+	if (munmap(ptr, size) == -1)
+		perror("munmap");
+
+	if (success)
+		ksft_test_result_pass("%s\n", test_name);
+	else
+		ksft_test_result_fail("%s\n", test_name);
+}
+
 /*
  * Returns the start address of the mapping on success, else returns
  * NULL on failure.
@@ -491,6 +565,7 @@  int main(int argc, char **argv)
 	unsigned int threshold_mb = VALIDATION_DEFAULT_THRESHOLD;
 	unsigned int pattern_seed;
 	int num_expand_tests = 2;
+	int num_misc_tests = 1;
 	struct test test_cases[MAX_TEST] = {};
 	struct test perf_test_cases[MAX_PERF_TEST];
 	int page_size;
@@ -572,7 +647,7 @@  int main(int argc, char **argv)
 				(threshold_mb * _1MB >= _1GB);
 
 	ksft_set_plan(ARRAY_SIZE(test_cases) + (run_perf_tests ?
-		      ARRAY_SIZE(perf_test_cases) : 0) + num_expand_tests);
+		      ARRAY_SIZE(perf_test_cases) : 0) + num_expand_tests + num_misc_tests);
 
 	for (i = 0; i < ARRAY_SIZE(test_cases); i++)
 		run_mremap_test_case(test_cases[i], &failures, threshold_mb,
@@ -590,6 +665,8 @@  int main(int argc, char **argv)
 
 	fclose(maps_fp);
 
+	mremap_move_within_range(pattern_seed);
+
 	if (run_perf_tests) {
 		ksft_print_msg("\n%s\n",
 		 "mremap HAVE_MOVE_PMD/PUD optimization time comparison for 1GB region:");