diff mbox series

[RFC,v2,3/3] KVM: selftests: Add set_memory_region_io to test memslots for MMIO BARs

Message ID 20240103084535.20162-1-yan.y.zhao@intel.com (mailing list archive)
State New
Headers show
Series KVM: allow mapping of compound tail pages for IO or PFNMAP mapping | expand

Commit Message

Yan Zhao Jan. 3, 2024, 8:45 a.m. UTC
Added a selftest set_memory_region_io to test memslots for MMIO BARs.
The MMIO BARs' backends are compound/non-compound huge pages serving as
device resources allocated by a mock device driver.

This selftest will assert and report "errno=14 - Bad address" in vcpu_run()
if any failure is met to add such MMIO BAR memslots.
After MMIO memslots removal, page reference counts of the device resources
are also checked.

As this selftest will interacts with a mock device "/dev/kvm_mock_device",
it depends on test driver test_kvm_mock_device.ko in the kernel.
CONFIG_TEST_KVM_MOCK_DEVICE=m must be enabled in the kernel.

Currently, this selftest is only compiled for __x86_64__.

Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
---
 tools/testing/selftests/kvm/Makefile          |   1 +
 .../selftests/kvm/set_memory_region_io.c      | 188 ++++++++++++++++++
 2 files changed, 189 insertions(+)
 create mode 100644 tools/testing/selftests/kvm/set_memory_region_io.c

Comments

Yuan Yao Jan. 5, 2024, 6:25 a.m. UTC | #1
On Wed, Jan 03, 2024 at 04:45:35PM +0800, Yan Zhao wrote:
> Added a selftest set_memory_region_io to test memslots for MMIO BARs.

Emm.. "set_memory_region_io" doesn't represent the real testing purpose,
but not sure if things like "memory_region_page_refcount_test" become
better...

> The MMIO BARs' backends are compound/non-compound huge pages serving as
> device resources allocated by a mock device driver.
>
> This selftest will assert and report "errno=14 - Bad address" in vcpu_run()
> if any failure is met to add such MMIO BAR memslots.
> After MMIO memslots removal, page reference counts of the device resources
> are also checked.
>
> As this selftest will interacts with a mock device "/dev/kvm_mock_device",
> it depends on test driver test_kvm_mock_device.ko in the kernel.
> CONFIG_TEST_KVM_MOCK_DEVICE=m must be enabled in the kernel.
>
> Currently, this selftest is only compiled for __x86_64__.
>
> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
> ---
>  tools/testing/selftests/kvm/Makefile          |   1 +
>  .../selftests/kvm/set_memory_region_io.c      | 188 ++++++++++++++++++
>  2 files changed, 189 insertions(+)
>  create mode 100644 tools/testing/selftests/kvm/set_memory_region_io.c
>
> diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile
> index 4412b42d95de..9d39514b6403 100644
> --- a/tools/testing/selftests/kvm/Makefile
> +++ b/tools/testing/selftests/kvm/Makefile
> @@ -144,6 +144,7 @@ TEST_GEN_PROGS_x86_64 += memslot_modification_stress_test
>  TEST_GEN_PROGS_x86_64 += memslot_perf_test
>  TEST_GEN_PROGS_x86_64 += rseq_test
>  TEST_GEN_PROGS_x86_64 += set_memory_region_test
> +TEST_GEN_PROGS_x86_64 += set_memory_region_io
>  TEST_GEN_PROGS_x86_64 += steal_time
>  TEST_GEN_PROGS_x86_64 += kvm_binary_stats_test
>  TEST_GEN_PROGS_x86_64 += system_counter_offset_test
> diff --git a/tools/testing/selftests/kvm/set_memory_region_io.c b/tools/testing/selftests/kvm/set_memory_region_io.c
> new file mode 100644
> index 000000000000..e221103091f4
> --- /dev/null
> +++ b/tools/testing/selftests/kvm/set_memory_region_io.c
> @@ -0,0 +1,188 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#define _GNU_SOURCE /* for program_invocation_short_name */
> +#include <fcntl.h>
> +#include <pthread.h>
> +#include <sched.h>
> +#include <semaphore.h>
> +#include <signal.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <sys/ioctl.h>
> +#include <sys/mman.h>
> +
> +#include <linux/compiler.h>
> +
> +#include <test_util.h>
> +#include <kvm_util.h>
> +#include <processor.h>
> +
> +#include <../../../../lib/test_kvm_mock_device_uapi.h>
> +
> +/*
> + * Somewhat arbitrary location and slot, intended to not overlap anything.
> + */
> +#define MEM_REGION_GPA_BASE	0xc0000000
> +#define RANDOM_OFFSET		0x1000
> +#define MEM_REGION_GPA_RANDOM	(MEM_REGION_GPA_BASE + RANDOM_OFFSET)
> +#define MEM_REGION_SLOT_ID	10
> +
> +static const bool non_compound_supported;
> +
> +static const uint64_t BASE_VAL = 0x1111;
> +static const uint64_t RANDOM_VAL = 0x2222;
> +
> +static unsigned long bar_size;
> +
> +static sem_t vcpu_ready;
> +
> +static void guest_code_read_bar(void)
> +{
> +	uint64_t val;
> +
> +	GUEST_SYNC(0);
> +
> +	val = READ_ONCE(*((uint64_t *)MEM_REGION_GPA_RANDOM));
> +	GUEST_ASSERT_EQ(val, RANDOM_VAL);
> +
> +	val = READ_ONCE(*((uint64_t *)MEM_REGION_GPA_BASE));
> +	GUEST_ASSERT_EQ(val, BASE_VAL);
> +
> +	GUEST_DONE();
> +}
> +
> +static void *vcpu_worker(void *data)
> +{
> +	struct kvm_vcpu *vcpu = data;
> +	struct kvm_run *run = vcpu->run;
> +	struct ucall uc;
> +	uint64_t cmd;
> +
> +	/*
> +	 * Loop until the guest is done.  Re-enter the guest on all MMIO exits,
> +	 * which will occur if the guest attempts to access a memslot after it
> +	 * has been deleted or while it is being moved .
> +	 */
> +	while (1) {
> +		vcpu_run(vcpu);
> +
> +		if (run->exit_reason == KVM_EXIT_IO) {
> +			cmd = get_ucall(vcpu, &uc);
> +			if (cmd != UCALL_SYNC)
> +				break;
> +
> +			sem_post(&vcpu_ready);
> +			continue;
> +		}
> +
> +		if (run->exit_reason != KVM_EXIT_MMIO)
> +			break;

Can the KVM_EXIT_MMIO happen on x86 ? IIUC the accessed GVAs
in guest code have 1:1 mapping to MEM_REGION_GPA_BASE, which
is covered by the memslot, and the memory slot is there
until the guest code path done.

> +
> +		TEST_ASSERT(!run->mmio.is_write, "Unexpected exit mmio write");
> +		TEST_ASSERT(run->mmio.len == 8,
> +			    "Unexpected exit mmio size = %u", run->mmio.len);
> +
> +		TEST_ASSERT(run->mmio.phys_addr < MEM_REGION_GPA_BASE ||
> +			    run->mmio.phys_addr >= MEM_REGION_GPA_BASE + bar_size,
> +			    "Unexpected exit mmio address = 0x%llx",
> +			    run->mmio.phys_addr);

Ditto, I just think you don't need this part in this testing.

> +	}
> +
> +	if (run->exit_reason == KVM_EXIT_IO && cmd == UCALL_ABORT)
> +		REPORT_GUEST_ASSERT(uc);
> +
> +	return NULL;
> +}
> +
> +static void wait_for_vcpu(void)
> +{
> +	struct timespec ts;
> +
> +	TEST_ASSERT(!clock_gettime(CLOCK_REALTIME, &ts),
> +		    "clock_gettime() failed: %d\n", errno);
> +
> +	ts.tv_sec += 2;
> +	TEST_ASSERT(!sem_timedwait(&vcpu_ready, &ts),
> +		    "sem_timedwait() failed: %d\n", errno);
> +
> +	/* Wait for the vCPU thread to reenter the guest. */
> +	usleep(100000);

In this testing it's not needed.
Because you only check guest state after guest code path done,
so pthread_join() is enough there.

> +}
> +
> +static void test_kvm_mock_device_bar(bool compound)
> +{
> +	struct kvm_vm *vm;
> +	void *mem;
> +	struct kvm_vcpu *vcpu;
> +	pthread_t vcpu_thread;
> +	int fd, ret;
> +	u32 param_compound = compound;
> +	u32 inequal = 0;
> +
> +	fd = open("/dev/kvm_mock_device", O_RDWR);
> +	if (fd < 0) {
> +		pr_info("Please ensure \"CONFIG_TEST_KVM_MOCK_DEVICE=m\" is enabled in the kernel");
> +		pr_info(", and execute\n\"modprobe test_kvm_mock_device\n");
> +	}
> +	TEST_ASSERT(fd >= 0, "Failed to open kvm mock device.");

Minor:
May better to move this part into main(), highlight it's a
must have dependency at beginning.

> +
> +	ret = ioctl(fd, KVM_MOCK_DEVICE_GET_BAR_SIZE, &bar_size);
> +	TEST_ASSERT(ret == 0, "Failed to get bar size of kvm mock device");
> +
> +	ret = ioctl(fd, KVM_MOCK_DEVICE_PREPARE_RESOURCE, &param_compound);
> +	TEST_ASSERT(ret == 0, "Failed to prepare resource of kvm mock device");
> +
> +	mem = mmap(NULL, (size_t)bar_size, PROT_READ | PROT_WRITE, MAP_SHARED,
> +		   fd, 0);
> +	TEST_ASSERT(mem != MAP_FAILED, "Failed to mmap() kvm mock device bar");
> +
> +	*(u64 *)mem = BASE_VAL;
> +	*(u64 *)(mem + RANDOM_OFFSET) = RANDOM_VAL;
> +
> +	vm = vm_create_with_one_vcpu(&vcpu, guest_code_read_bar);
> +
> +	vm_set_user_memory_region(vm, MEM_REGION_SLOT_ID, 0, MEM_REGION_GPA_BASE,
> +				  bar_size, mem);
> +
> +	virt_map(vm, MEM_REGION_GPA_BASE, MEM_REGION_GPA_BASE,
> +		 (RANDOM_OFFSET / getpagesize()) + 1);
> +
> +	pthread_create(&vcpu_thread, NULL, vcpu_worker, vcpu);
> +
> +	/* Ensure the guest thread is spun up. */
> +	wait_for_vcpu();
> +
> +	pthread_join(vcpu_thread, NULL);
> +
> +	vm_set_user_memory_region(vm, MEM_REGION_SLOT_ID, 0, 0, 0, 0);
> +	kvm_vm_free(vm);
> +
> +	ret = ioctl(fd, KVM_MOCK_DEVICE_CHECK_BACKEND_REF, &inequal);
> +	TEST_ASSERT(ret == 0 && inequal == 0, "Incorrect resource ref of KVM device");
> +
> +	munmap(mem, bar_size);
> +	close(fd);
> +}
> +
> +static void test_non_compound_backend(void)
> +{
> +	pr_info("Testing non-compound huge page backend for mem slot\n");
> +	test_kvm_mock_device_bar(false);
> +}
> +
> +static void test_compound_backend(void)
> +{
> +	pr_info("Testing compound huge page backend for mem slot\n");
> +	test_kvm_mock_device_bar(true);
> +}
> +
> +int main(int argc, char *argv[])
> +{
> +#ifdef __x86_64__
> +	test_compound_backend();
> +	if (non_compound_supported)

Nobody set this, but the mock device looks already supported
it, so how about just run the 2 testings directly here ?

> +		test_non_compound_backend();
> +#endif
> +
> +	return 0;
> +}
> --
> 2.17.1
>
>
Yan Zhao Jan. 5, 2024, 10 a.m. UTC | #2
On Fri, Jan 05, 2024 at 02:25:26PM +0800, Yuan Yao wrote:
> On Wed, Jan 03, 2024 at 04:45:35PM +0800, Yan Zhao wrote:
> > Added a selftest set_memory_region_io to test memslots for MMIO BARs.
> 
> Emm.. "set_memory_region_io" doesn't represent the real testing purpose,
> but not sure if things like "memory_region_page_refcount_test" become
> better...
Hmm, memory_region_io_page_test?
Not just ref count is tested.
Without patch 1, mapping of pages will even fail.

> 
> > The MMIO BARs' backends are compound/non-compound huge pages serving as
> > device resources allocated by a mock device driver.
> >
> > This selftest will assert and report "errno=14 - Bad address" in vcpu_run()
> > if any failure is met to add such MMIO BAR memslots.
> > After MMIO memslots removal, page reference counts of the device resources
> > are also checked.
> >
> > As this selftest will interacts with a mock device "/dev/kvm_mock_device",
> > it depends on test driver test_kvm_mock_device.ko in the kernel.
> > CONFIG_TEST_KVM_MOCK_DEVICE=m must be enabled in the kernel.
> >
> > Currently, this selftest is only compiled for __x86_64__.
> >
> > Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
...
> > +static void *vcpu_worker(void *data)
> > +{
> > +	struct kvm_vcpu *vcpu = data;
> > +	struct kvm_run *run = vcpu->run;
> > +	struct ucall uc;
> > +	uint64_t cmd;
> > +
> > +	/*
> > +	 * Loop until the guest is done.  Re-enter the guest on all MMIO exits,
> > +	 * which will occur if the guest attempts to access a memslot after it
> > +	 * has been deleted or while it is being moved .
> > +	 */
> > +	while (1) {
> > +		vcpu_run(vcpu);
> > +
> > +		if (run->exit_reason == KVM_EXIT_IO) {
> > +			cmd = get_ucall(vcpu, &uc);
> > +			if (cmd != UCALL_SYNC)
> > +				break;
> > +
> > +			sem_post(&vcpu_ready);
> > +			continue;
> > +		}
> > +
> > +		if (run->exit_reason != KVM_EXIT_MMIO)
> > +			break;
> 
> Can the KVM_EXIT_MMIO happen on x86 ? IIUC the accessed GVAs
> in guest code have 1:1 mapping to MEM_REGION_GPA_BASE, which
> is covered by the memslot, and the memory slot is there
> until the guest code path done.
> 
It can, if the GPAs accessed by guest code are not even mapped as a
memslot.
This check is to ensure GPAs are read from the testing memslot for mock IO.

> > +
> > +		TEST_ASSERT(!run->mmio.is_write, "Unexpected exit mmio write");
> > +		TEST_ASSERT(run->mmio.len == 8,
> > +			    "Unexpected exit mmio size = %u", run->mmio.len);
> > +
> > +		TEST_ASSERT(run->mmio.phys_addr < MEM_REGION_GPA_BASE ||
> > +			    run->mmio.phys_addr >= MEM_REGION_GPA_BASE + bar_size,
> > +			    "Unexpected exit mmio address = 0x%llx",
> > +			    run->mmio.phys_addr);
> 
> Ditto, I just think you don't need this part in this testing.
> 
> > +	}
> > +
> > +	if (run->exit_reason == KVM_EXIT_IO && cmd == UCALL_ABORT)
> > +		REPORT_GUEST_ASSERT(uc);
> > +
> > +	return NULL;
> > +}
> > +
> > +static void wait_for_vcpu(void)
> > +{
> > +	struct timespec ts;
> > +
> > +	TEST_ASSERT(!clock_gettime(CLOCK_REALTIME, &ts),
> > +		    "clock_gettime() failed: %d\n", errno);
> > +
> > +	ts.tv_sec += 2;
> > +	TEST_ASSERT(!sem_timedwait(&vcpu_ready, &ts),
> > +		    "sem_timedwait() failed: %d\n", errno);
> > +
> > +	/* Wait for the vCPU thread to reenter the guest. */
> > +	usleep(100000);
> 
> In this testing it's not needed.
> Because you only check guest state after guest code path done,
> so pthread_join() is enough there.
Right. Just keep to the convention :)

> 
> > +}
> > +
> > +static void test_kvm_mock_device_bar(bool compound)
> > +{
> > +	struct kvm_vm *vm;
> > +	void *mem;
> > +	struct kvm_vcpu *vcpu;
> > +	pthread_t vcpu_thread;
> > +	int fd, ret;
> > +	u32 param_compound = compound;
> > +	u32 inequal = 0;
> > +
> > +	fd = open("/dev/kvm_mock_device", O_RDWR);
> > +	if (fd < 0) {
> > +		pr_info("Please ensure \"CONFIG_TEST_KVM_MOCK_DEVICE=m\" is enabled in the kernel");
> > +		pr_info(", and execute\n\"modprobe test_kvm_mock_device\n");
> > +	}
> > +	TEST_ASSERT(fd >= 0, "Failed to open kvm mock device.");
> 
> Minor:
> May better to move this part into main(), highlight it's a
> must have dependency at beginning.
I don't think so.
main() can do other tests that are not relying on the mock device.
Actually I'm not even sure if this test needs to be put in
set_memory_region_test.c.

> 
> > +
> > +	ret = ioctl(fd, KVM_MOCK_DEVICE_GET_BAR_SIZE, &bar_size);
> > +	TEST_ASSERT(ret == 0, "Failed to get bar size of kvm mock device");
> > +
> > +	ret = ioctl(fd, KVM_MOCK_DEVICE_PREPARE_RESOURCE, &param_compound);
> > +	TEST_ASSERT(ret == 0, "Failed to prepare resource of kvm mock device");
> > +
> > +	mem = mmap(NULL, (size_t)bar_size, PROT_READ | PROT_WRITE, MAP_SHARED,
> > +		   fd, 0);
> > +	TEST_ASSERT(mem != MAP_FAILED, "Failed to mmap() kvm mock device bar");
> > +
> > +	*(u64 *)mem = BASE_VAL;
> > +	*(u64 *)(mem + RANDOM_OFFSET) = RANDOM_VAL;
> > +
> > +	vm = vm_create_with_one_vcpu(&vcpu, guest_code_read_bar);
> > +
> > +	vm_set_user_memory_region(vm, MEM_REGION_SLOT_ID, 0, MEM_REGION_GPA_BASE,
> > +				  bar_size, mem);
> > +
> > +	virt_map(vm, MEM_REGION_GPA_BASE, MEM_REGION_GPA_BASE,
> > +		 (RANDOM_OFFSET / getpagesize()) + 1);
> > +
> > +	pthread_create(&vcpu_thread, NULL, vcpu_worker, vcpu);
> > +
> > +	/* Ensure the guest thread is spun up. */
> > +	wait_for_vcpu();
> > +
> > +	pthread_join(vcpu_thread, NULL);
> > +
> > +	vm_set_user_memory_region(vm, MEM_REGION_SLOT_ID, 0, 0, 0, 0);
> > +	kvm_vm_free(vm);
> > +
> > +	ret = ioctl(fd, KVM_MOCK_DEVICE_CHECK_BACKEND_REF, &inequal);
> > +	TEST_ASSERT(ret == 0 && inequal == 0, "Incorrect resource ref of KVM device");
> > +
> > +	munmap(mem, bar_size);
> > +	close(fd);
> > +}
> > +
> > +static void test_non_compound_backend(void)
> > +{
> > +	pr_info("Testing non-compound huge page backend for mem slot\n");
> > +	test_kvm_mock_device_bar(false);
> > +}
> > +
> > +static void test_compound_backend(void)
> > +{
> > +	pr_info("Testing compound huge page backend for mem slot\n");
> > +	test_kvm_mock_device_bar(true);
> > +}
> > +
> > +int main(int argc, char *argv[])
> > +{
> > +#ifdef __x86_64__
> > +	test_compound_backend();
> > +	if (non_compound_supported)
> 
> Nobody set this, but the mock device looks already supported
> it, so how about just run the 2 testings directly here ?
Without the series "allow mapping non-refcounted pages" [1], the test
test_non_compound_backend() will simply fail.

I added this test case is to show it non-compound pages as backend can
also be tested with this selftest. And actually, I did tested that
series with this selftets.

So, can remove the "if non_compound_supported" after [1] is merged.

[1] https://lore.kernel.org/all/20230911021637.1941096-1-stevensd@google.com/,

Thanks

> 
> > +		test_non_compound_backend();
> > +#endif
> > +
> > +	return 0;
> > +}
> > --
> > 2.17.1
> >
>
diff mbox series

Patch

diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile
index 4412b42d95de..9d39514b6403 100644
--- a/tools/testing/selftests/kvm/Makefile
+++ b/tools/testing/selftests/kvm/Makefile
@@ -144,6 +144,7 @@  TEST_GEN_PROGS_x86_64 += memslot_modification_stress_test
 TEST_GEN_PROGS_x86_64 += memslot_perf_test
 TEST_GEN_PROGS_x86_64 += rseq_test
 TEST_GEN_PROGS_x86_64 += set_memory_region_test
+TEST_GEN_PROGS_x86_64 += set_memory_region_io
 TEST_GEN_PROGS_x86_64 += steal_time
 TEST_GEN_PROGS_x86_64 += kvm_binary_stats_test
 TEST_GEN_PROGS_x86_64 += system_counter_offset_test
diff --git a/tools/testing/selftests/kvm/set_memory_region_io.c b/tools/testing/selftests/kvm/set_memory_region_io.c
new file mode 100644
index 000000000000..e221103091f4
--- /dev/null
+++ b/tools/testing/selftests/kvm/set_memory_region_io.c
@@ -0,0 +1,188 @@ 
+// SPDX-License-Identifier: GPL-2.0
+#define _GNU_SOURCE /* for program_invocation_short_name */
+#include <fcntl.h>
+#include <pthread.h>
+#include <sched.h>
+#include <semaphore.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+
+#include <linux/compiler.h>
+
+#include <test_util.h>
+#include <kvm_util.h>
+#include <processor.h>
+
+#include <../../../../lib/test_kvm_mock_device_uapi.h>
+
+/*
+ * Somewhat arbitrary location and slot, intended to not overlap anything.
+ */
+#define MEM_REGION_GPA_BASE	0xc0000000
+#define RANDOM_OFFSET		0x1000
+#define MEM_REGION_GPA_RANDOM	(MEM_REGION_GPA_BASE + RANDOM_OFFSET)
+#define MEM_REGION_SLOT_ID	10
+
+static const bool non_compound_supported;
+
+static const uint64_t BASE_VAL = 0x1111;
+static const uint64_t RANDOM_VAL = 0x2222;
+
+static unsigned long bar_size;
+
+static sem_t vcpu_ready;
+
+static void guest_code_read_bar(void)
+{
+	uint64_t val;
+
+	GUEST_SYNC(0);
+
+	val = READ_ONCE(*((uint64_t *)MEM_REGION_GPA_RANDOM));
+	GUEST_ASSERT_EQ(val, RANDOM_VAL);
+
+	val = READ_ONCE(*((uint64_t *)MEM_REGION_GPA_BASE));
+	GUEST_ASSERT_EQ(val, BASE_VAL);
+
+	GUEST_DONE();
+}
+
+static void *vcpu_worker(void *data)
+{
+	struct kvm_vcpu *vcpu = data;
+	struct kvm_run *run = vcpu->run;
+	struct ucall uc;
+	uint64_t cmd;
+
+	/*
+	 * Loop until the guest is done.  Re-enter the guest on all MMIO exits,
+	 * which will occur if the guest attempts to access a memslot after it
+	 * has been deleted or while it is being moved .
+	 */
+	while (1) {
+		vcpu_run(vcpu);
+
+		if (run->exit_reason == KVM_EXIT_IO) {
+			cmd = get_ucall(vcpu, &uc);
+			if (cmd != UCALL_SYNC)
+				break;
+
+			sem_post(&vcpu_ready);
+			continue;
+		}
+
+		if (run->exit_reason != KVM_EXIT_MMIO)
+			break;
+
+		TEST_ASSERT(!run->mmio.is_write, "Unexpected exit mmio write");
+		TEST_ASSERT(run->mmio.len == 8,
+			    "Unexpected exit mmio size = %u", run->mmio.len);
+
+		TEST_ASSERT(run->mmio.phys_addr < MEM_REGION_GPA_BASE ||
+			    run->mmio.phys_addr >= MEM_REGION_GPA_BASE + bar_size,
+			    "Unexpected exit mmio address = 0x%llx",
+			    run->mmio.phys_addr);
+	}
+
+	if (run->exit_reason == KVM_EXIT_IO && cmd == UCALL_ABORT)
+		REPORT_GUEST_ASSERT(uc);
+
+	return NULL;
+}
+
+static void wait_for_vcpu(void)
+{
+	struct timespec ts;
+
+	TEST_ASSERT(!clock_gettime(CLOCK_REALTIME, &ts),
+		    "clock_gettime() failed: %d\n", errno);
+
+	ts.tv_sec += 2;
+	TEST_ASSERT(!sem_timedwait(&vcpu_ready, &ts),
+		    "sem_timedwait() failed: %d\n", errno);
+
+	/* Wait for the vCPU thread to reenter the guest. */
+	usleep(100000);
+}
+
+static void test_kvm_mock_device_bar(bool compound)
+{
+	struct kvm_vm *vm;
+	void *mem;
+	struct kvm_vcpu *vcpu;
+	pthread_t vcpu_thread;
+	int fd, ret;
+	u32 param_compound = compound;
+	u32 inequal = 0;
+
+	fd = open("/dev/kvm_mock_device", O_RDWR);
+	if (fd < 0) {
+		pr_info("Please ensure \"CONFIG_TEST_KVM_MOCK_DEVICE=m\" is enabled in the kernel");
+		pr_info(", and execute\n\"modprobe test_kvm_mock_device\n");
+	}
+	TEST_ASSERT(fd >= 0, "Failed to open kvm mock device.");
+
+	ret = ioctl(fd, KVM_MOCK_DEVICE_GET_BAR_SIZE, &bar_size);
+	TEST_ASSERT(ret == 0, "Failed to get bar size of kvm mock device");
+
+	ret = ioctl(fd, KVM_MOCK_DEVICE_PREPARE_RESOURCE, &param_compound);
+	TEST_ASSERT(ret == 0, "Failed to prepare resource of kvm mock device");
+
+	mem = mmap(NULL, (size_t)bar_size, PROT_READ | PROT_WRITE, MAP_SHARED,
+		   fd, 0);
+	TEST_ASSERT(mem != MAP_FAILED, "Failed to mmap() kvm mock device bar");
+
+	*(u64 *)mem = BASE_VAL;
+	*(u64 *)(mem + RANDOM_OFFSET) = RANDOM_VAL;
+
+	vm = vm_create_with_one_vcpu(&vcpu, guest_code_read_bar);
+
+	vm_set_user_memory_region(vm, MEM_REGION_SLOT_ID, 0, MEM_REGION_GPA_BASE,
+				  bar_size, mem);
+
+	virt_map(vm, MEM_REGION_GPA_BASE, MEM_REGION_GPA_BASE,
+		 (RANDOM_OFFSET / getpagesize()) + 1);
+
+	pthread_create(&vcpu_thread, NULL, vcpu_worker, vcpu);
+
+	/* Ensure the guest thread is spun up. */
+	wait_for_vcpu();
+
+	pthread_join(vcpu_thread, NULL);
+
+	vm_set_user_memory_region(vm, MEM_REGION_SLOT_ID, 0, 0, 0, 0);
+	kvm_vm_free(vm);
+
+	ret = ioctl(fd, KVM_MOCK_DEVICE_CHECK_BACKEND_REF, &inequal);
+	TEST_ASSERT(ret == 0 && inequal == 0, "Incorrect resource ref of KVM device");
+
+	munmap(mem, bar_size);
+	close(fd);
+}
+
+static void test_non_compound_backend(void)
+{
+	pr_info("Testing non-compound huge page backend for mem slot\n");
+	test_kvm_mock_device_bar(false);
+}
+
+static void test_compound_backend(void)
+{
+	pr_info("Testing compound huge page backend for mem slot\n");
+	test_kvm_mock_device_bar(true);
+}
+
+int main(int argc, char *argv[])
+{
+#ifdef __x86_64__
+	test_compound_backend();
+	if (non_compound_supported)
+		test_non_compound_backend();
+#endif
+
+	return 0;
+}