diff mbox series

[net-next,v10,2/3] net: gro: move L3 flush checks to tcp_gro_receive and udp_gro_receive_segment

Message ID 20240509190819.2985-3-richardbgobert@gmail.com (mailing list archive)
State Accepted
Commit 4b0ebbca3e1679765c06d5c466ee7f3228d4b156
Headers show
Series net: gro: remove network_header use, move p->{flush/flush_id} calculations to L4 | expand

Commit Message

Richard Gobert May 9, 2024, 7:08 p.m. UTC
{inet,ipv6}_gro_receive functions perform flush checks (ttl, flags,
iph->id, ...) against all packets in a loop. These flush checks are used in
all merging UDP and TCP flows.

These checks need to be done only once and only against the found p skb,
since they only affect flush and not same_flow.

This patch leverages correct network header offsets from the cb for both
outer and inner network headers - allowing these checks to be done only
once, in tcp_gro_receive and udp_gro_receive_segment. As a result,
NAPI_GRO_CB(p)->flush is not used at all. In addition, flush_id checks are
more declarative and contained in inet_gro_flush, thus removing the need
for flush_id in napi_gro_cb.

This results in less parsing code for non-loop flush tests for TCP and UDP
flows.

To make sure results are not within noise range - I've made netfilter drop
all TCP packets, and measured CPU performance in GRO (in this case GRO is
responsible for about 50% of the CPU utilization).

perf top while replaying 64 parallel IP/TCP streams merging in GRO:
(gro_receive_network_flush is compiled inline to tcp_gro_receive)
net-next:
        6.94% [kernel] [k] inet_gro_receive
        3.02% [kernel] [k] tcp_gro_receive

patch applied:
        4.27% [kernel] [k] tcp_gro_receive
        4.22% [kernel] [k] inet_gro_receive

perf top while replaying 64 parallel IP/IP/TCP streams merging in GRO (same
results for any encapsulation, in this case inet_gro_receive is top
offender in net-next)
net-next:
        10.09% [kernel] [k] inet_gro_receive
        2.08% [kernel] [k] tcp_gro_receive

patch applied:
        6.97% [kernel] [k] inet_gro_receive
        3.68% [kernel] [k] tcp_gro_receive

Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
---
 include/net/gro.h      | 76 +++++++++++++++++++++++++++++++++++++-----
 net/core/gro.c         |  3 --
 net/ipv4/af_inet.c     | 41 +----------------------
 net/ipv4/tcp_offload.c | 17 ++--------
 net/ipv4/udp_offload.c |  9 +----
 net/ipv6/ip6_offload.c | 11 ------
 6 files changed, 73 insertions(+), 84 deletions(-)

Comments

Willem de Bruijn May 13, 2024, 12:43 a.m. UTC | #1
Richard Gobert wrote:
> {inet,ipv6}_gro_receive functions perform flush checks (ttl, flags,
> iph->id, ...) against all packets in a loop. These flush checks are used in
> all merging UDP and TCP flows.
> 
> These checks need to be done only once and only against the found p skb,
> since they only affect flush and not same_flow.
> 
> This patch leverages correct network header offsets from the cb for both
> outer and inner network headers - allowing these checks to be done only
> once, in tcp_gro_receive and udp_gro_receive_segment. As a result,
> NAPI_GRO_CB(p)->flush is not used at all. In addition, flush_id checks are
> more declarative and contained in inet_gro_flush, thus removing the need
> for flush_id in napi_gro_cb.
> 
> This results in less parsing code for non-loop flush tests for TCP and UDP
> flows.
> 
> To make sure results are not within noise range - I've made netfilter drop
> all TCP packets, and measured CPU performance in GRO (in this case GRO is
> responsible for about 50% of the CPU utilization).
> 
> perf top while replaying 64 parallel IP/TCP streams merging in GRO:
> (gro_receive_network_flush is compiled inline to tcp_gro_receive)
> net-next:
>         6.94% [kernel] [k] inet_gro_receive
>         3.02% [kernel] [k] tcp_gro_receive
> 
> patch applied:
>         4.27% [kernel] [k] tcp_gro_receive
>         4.22% [kernel] [k] inet_gro_receive
> 
> perf top while replaying 64 parallel IP/IP/TCP streams merging in GRO (same
> results for any encapsulation, in this case inet_gro_receive is top
> offender in net-next)
> net-next:
>         10.09% [kernel] [k] inet_gro_receive
>         2.08% [kernel] [k] tcp_gro_receive
> 
> patch applied:
>         6.97% [kernel] [k] inet_gro_receive
>         3.68% [kernel] [k] tcp_gro_receive
> 
> Signed-off-by: Richard Gobert <richardbgobert@gmail.com>

Reviewed-by: Willem de Bruijn <willemb@google.com>
Geert Uytterhoeven May 14, 2024, 12:13 p.m. UTC | #2
Hi Richard,

On Thu, May 9, 2024 at 9:09 PM Richard Gobert <richardbgobert@gmail.com> wrote:
> {inet,ipv6}_gro_receive functions perform flush checks (ttl, flags,
> iph->id, ...) against all packets in a loop. These flush checks are used in
> all merging UDP and TCP flows.
>
> These checks need to be done only once and only against the found p skb,
> since they only affect flush and not same_flow.
>
> This patch leverages correct network header offsets from the cb for both
> outer and inner network headers - allowing these checks to be done only
> once, in tcp_gro_receive and udp_gro_receive_segment. As a result,
> NAPI_GRO_CB(p)->flush is not used at all. In addition, flush_id checks are
> more declarative and contained in inet_gro_flush, thus removing the need
> for flush_id in napi_gro_cb.
>
> This results in less parsing code for non-loop flush tests for TCP and UDP
> flows.
>
> To make sure results are not within noise range - I've made netfilter drop
> all TCP packets, and measured CPU performance in GRO (in this case GRO is
> responsible for about 50% of the CPU utilization).
>
> perf top while replaying 64 parallel IP/TCP streams merging in GRO:
> (gro_receive_network_flush is compiled inline to tcp_gro_receive)
> net-next:
>         6.94% [kernel] [k] inet_gro_receive
>         3.02% [kernel] [k] tcp_gro_receive
>
> patch applied:
>         4.27% [kernel] [k] tcp_gro_receive
>         4.22% [kernel] [k] inet_gro_receive
>
> perf top while replaying 64 parallel IP/IP/TCP streams merging in GRO (same
> results for any encapsulation, in this case inet_gro_receive is top
> offender in net-next)
> net-next:
>         10.09% [kernel] [k] inet_gro_receive
>         2.08% [kernel] [k] tcp_gro_receive
>
> patch applied:
>         6.97% [kernel] [k] inet_gro_receive
>         3.68% [kernel] [k] tcp_gro_receive
>
> Signed-off-by: Richard Gobert <richardbgobert@gmail.com>

Thanks for your patch, which is now commit 4b0ebbca3e167976 ("net: gro:
move L3 flush checks to tcp_gro_receive and udp_gro_receive_segment")
in net-next/main (next-20240514).

noreply@ellerman.id.au reports build failures on m68k, e.g.
http://kisskb.ellerman.id.au/kisskb/buildresult/15168903/

    net/core/gro.c: In function ‘dev_gro_receive’:
    ././include/linux/compiler_types.h:460:38: error: call to
‘__compiletime_assert_654’ declared with attribute error: BUILD_BUG_ON
failed: !IS_ALIGNED(offsetof(struct napi_gro_cb, zeroed), sizeof(u32))

> --- a/include/net/gro.h
> +++ b/include/net/gro.h
> @@ -36,15 +36,15 @@ struct napi_gro_cb {
>         /* This is non-zero if the packet cannot be merged with the new skb. */
>         u16     flush;
>
> -       /* Save the IP ID here and check when we get to the transport layer */
> -       u16     flush_id;
> -
>         /* Number of segments aggregated. */
>         u16     count;
>
>         /* Used in ipv6_gro_receive() and foo-over-udp and esp-in-udp */
>         u16     proto;

On most architectures, there is now a hole of 2 bytes here.
However, on m68k the minimum alignment of __wsum (__u32) below is 2,
hence there is no hole, breaking the assertion.

Probably you just want to make this explicit, by adding

    u16 pad;

here.

>
> +       /* used to support CHECKSUM_COMPLETE for tunneling protocols */
> +       __wsum  csum;

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Jakub Kicinski May 14, 2024, 2:14 p.m. UTC | #3
On Tue, 14 May 2024 14:13:21 +0200 Geert Uytterhoeven wrote:
> On Thu, May 9, 2024 at 9:09 PM Richard Gobert <richardbgobert@gmail.com> wrote:
> > {inet,ipv6}_gro_receive functions perform flush checks (ttl, flags,
> > iph->id, ...) against all packets in a loop. These flush checks are used in
> > all merging UDP and TCP flows.
> >
> > These checks need to be done only once and only against the found p skb,
> > since they only affect flush and not same_flow.
> >
> > This patch leverages correct network header offsets from the cb for both
> > outer and inner network headers - allowing these checks to be done only
> > once, in tcp_gro_receive and udp_gro_receive_segment. As a result,
> > NAPI_GRO_CB(p)->flush is not used at all. In addition, flush_id checks are
> > more declarative and contained in inet_gro_flush, thus removing the need
> > for flush_id in napi_gro_cb.
> >
> > This results in less parsing code for non-loop flush tests for TCP and UDP
> > flows.
> >
> > To make sure results are not within noise range - I've made netfilter drop
> > all TCP packets, and measured CPU performance in GRO (in this case GRO is
> > responsible for about 50% of the CPU utilization).
> >
> > perf top while replaying 64 parallel IP/TCP streams merging in GRO:
> > (gro_receive_network_flush is compiled inline to tcp_gro_receive)
> > net-next:
> >         6.94% [kernel] [k] inet_gro_receive
> >         3.02% [kernel] [k] tcp_gro_receive
> >
> > patch applied:
> >         4.27% [kernel] [k] tcp_gro_receive
> >         4.22% [kernel] [k] inet_gro_receive
> >
> > perf top while replaying 64 parallel IP/IP/TCP streams merging in GRO (same
> > results for any encapsulation, in this case inet_gro_receive is top
> > offender in net-next)
> > net-next:
> >         10.09% [kernel] [k] inet_gro_receive
> >         2.08% [kernel] [k] tcp_gro_receive
> >
> > patch applied:
> >         6.97% [kernel] [k] inet_gro_receive
> >         3.68% [kernel] [k] tcp_gro_receive
> >
> > Signed-off-by: Richard Gobert <richardbgobert@gmail.com>  
> 
> Thanks for your patch, which is now commit 4b0ebbca3e167976 ("net: gro:
> move L3 flush checks to tcp_gro_receive and udp_gro_receive_segment")
> in net-next/main (next-20240514).
> 
> noreply@ellerman.id.au reports build failures on m68k, e.g.
> http://kisskb.ellerman.id.au/kisskb/buildresult/15168903/
> 
>     net/core/gro.c: In function ‘dev_gro_receive’:
>     ././include/linux/compiler_types.h:460:38: error: call to
> ‘__compiletime_assert_654’ declared with attribute error: BUILD_BUG_ON
> failed: !IS_ALIGNED(offsetof(struct napi_gro_cb, zeroed), sizeof(u32))

Hi Richard, any chance of getting this fixed within the next 2 hours?
I can't send the net-next PR if it doesn't build on one of the arches..
Richard Gobert May 14, 2024, 3:56 p.m. UTC | #4
Jakub Kicinski wrote:
> On Tue, 14 May 2024 14:13:21 +0200 Geert Uytterhoeven wrote:
>> On Thu, May 9, 2024 at 9:09 PM Richard Gobert <richardbgobert@gmail.com> wrote:
>>> {inet,ipv6}_gro_receive functions perform flush checks (ttl, flags,
>>> iph->id, ...) against all packets in a loop. These flush checks are used in
>>> all merging UDP and TCP flows.
>>>
>>> These checks need to be done only once and only against the found p skb,
>>> since they only affect flush and not same_flow.
>>>
>>> This patch leverages correct network header offsets from the cb for both
>>> outer and inner network headers - allowing these checks to be done only
>>> once, in tcp_gro_receive and udp_gro_receive_segment. As a result,
>>> NAPI_GRO_CB(p)->flush is not used at all. In addition, flush_id checks are
>>> more declarative and contained in inet_gro_flush, thus removing the need
>>> for flush_id in napi_gro_cb.
>>>
>>> This results in less parsing code for non-loop flush tests for TCP and UDP
>>> flows.
>>>
>>> To make sure results are not within noise range - I've made netfilter drop
>>> all TCP packets, and measured CPU performance in GRO (in this case GRO is
>>> responsible for about 50% of the CPU utilization).
>>>
>>> perf top while replaying 64 parallel IP/TCP streams merging in GRO:
>>> (gro_receive_network_flush is compiled inline to tcp_gro_receive)
>>> net-next:
>>>         6.94% [kernel] [k] inet_gro_receive
>>>         3.02% [kernel] [k] tcp_gro_receive
>>>
>>> patch applied:
>>>         4.27% [kernel] [k] tcp_gro_receive
>>>         4.22% [kernel] [k] inet_gro_receive
>>>
>>> perf top while replaying 64 parallel IP/IP/TCP streams merging in GRO (same
>>> results for any encapsulation, in this case inet_gro_receive is top
>>> offender in net-next)
>>> net-next:
>>>         10.09% [kernel] [k] inet_gro_receive
>>>         2.08% [kernel] [k] tcp_gro_receive
>>>
>>> patch applied:
>>>         6.97% [kernel] [k] inet_gro_receive
>>>         3.68% [kernel] [k] tcp_gro_receive
>>>
>>> Signed-off-by: Richard Gobert <richardbgobert@gmail.com>  
>>
>> Thanks for your patch, which is now commit 4b0ebbca3e167976 ("net: gro:
>> move L3 flush checks to tcp_gro_receive and udp_gro_receive_segment")
>> in net-next/main (next-20240514).
>>
>> noreply@ellerman.id.au reports build failures on m68k, e.g.
>> http://kisskb.ellerman.id.au/kisskb/buildresult/15168903/
>>
>>     net/core/gro.c: In function ‘dev_gro_receive’:
>>     ././include/linux/compiler_types.h:460:38: error: call to
>> ‘__compiletime_assert_654’ declared with attribute error: BUILD_BUG_ON
>> failed: !IS_ALIGNED(offsetof(struct napi_gro_cb, zeroed), sizeof(u32))
> 
> Hi Richard, any chance of getting this fixed within the next 2 hours?
> I can't send the net-next PR if it doesn't build on one of the arches..

Hi Jakub and Geert,
I'm only seeing this mail now, sorry for the late response.
I can fix this within the next two hours, would you prefer a standalone 
patch or should I add it to this patch series?
Jakub Kicinski May 14, 2024, 4:06 p.m. UTC | #5
On Tue, 14 May 2024 17:56:44 +0200 Richard Gobert wrote:
> > Hi Richard, any chance of getting this fixed within the next 2 hours?
> > I can't send the net-next PR if it doesn't build on one of the arches..  
> 
> Hi Jakub and Geert,
> I'm only seeing this mail now, sorry for the late response.
> I can fix this within the next two hours, would you prefer a standalone 
> patch or should I add it to this patch series?

Standalone patch, please!
diff mbox series

Patch

diff --git a/include/net/gro.h b/include/net/gro.h
index cbc1b0aaf295..f13634b1f4c1 100644
--- a/include/net/gro.h
+++ b/include/net/gro.h
@@ -36,15 +36,15 @@  struct napi_gro_cb {
 	/* This is non-zero if the packet cannot be merged with the new skb. */
 	u16	flush;
 
-	/* Save the IP ID here and check when we get to the transport layer */
-	u16	flush_id;
-
 	/* Number of segments aggregated. */
 	u16	count;
 
 	/* Used in ipv6_gro_receive() and foo-over-udp and esp-in-udp */
 	u16	proto;
 
+	/* used to support CHECKSUM_COMPLETE for tunneling protocols */
+	__wsum	csum;
+
 /* Used in napi_gro_cb::free */
 #define NAPI_GRO_FREE             1
 #define NAPI_GRO_FREE_STOLEN_HEAD 2
@@ -75,8 +75,8 @@  struct napi_gro_cb {
 		/* Used in GRE, set in fou/gue_gro_receive */
 		u8	is_fou:1;
 
-		/* Used to determine if flush_id can be ignored */
-		u8	is_atomic:1;
+		/* Used to determine if ipid_offset can be ignored */
+		u8	ip_fixedid:1;
 
 		/* Number of gro_receive callbacks this packet already went through */
 		u8 recursion_counter:4;
@@ -85,9 +85,6 @@  struct napi_gro_cb {
 		u8	is_flist:1;
 	);
 
-	/* used to support CHECKSUM_COMPLETE for tunneling protocols */
-	__wsum	csum;
-
 	/* L3 offsets */
 	union {
 		struct {
@@ -442,6 +439,69 @@  static inline __wsum ip6_gro_compute_pseudo(const struct sk_buff *skb,
 					    skb_gro_len(skb), proto, 0));
 }
 
+static inline int inet_gro_flush(const struct iphdr *iph, const struct iphdr *iph2,
+				 struct sk_buff *p, bool outer)
+{
+	const u32 id = ntohl(*(__be32 *)&iph->id);
+	const u32 id2 = ntohl(*(__be32 *)&iph2->id);
+	const u16 ipid_offset = (id >> 16) - (id2 >> 16);
+	const u16 count = NAPI_GRO_CB(p)->count;
+	const u32 df = id & IP_DF;
+	int flush;
+
+	/* All fields must match except length and checksum. */
+	flush = (iph->ttl ^ iph2->ttl) | (iph->tos ^ iph2->tos) | (df ^ (id2 & IP_DF));
+
+	if (flush | (outer && df))
+		return flush;
+
+	/* When we receive our second frame we can make a decision on if we
+	 * continue this flow as an atomic flow with a fixed ID or if we use
+	 * an incrementing ID.
+	 */
+	if (count == 1 && df && !ipid_offset)
+		NAPI_GRO_CB(p)->ip_fixedid = true;
+
+	return ipid_offset ^ (count * !NAPI_GRO_CB(p)->ip_fixedid);
+}
+
+static inline int ipv6_gro_flush(const struct ipv6hdr *iph, const struct ipv6hdr *iph2)
+{
+	/* <Version:4><Traffic_Class:8><Flow_Label:20> */
+	__be32 first_word = *(__be32 *)iph ^ *(__be32 *)iph2;
+
+	/* Flush if Traffic Class fields are different. */
+	return !!((first_word & htonl(0x0FF00000)) |
+		(__force __be32)(iph->hop_limit ^ iph2->hop_limit));
+}
+
+static inline int __gro_receive_network_flush(const void *th, const void *th2,
+					      struct sk_buff *p, const u16 diff,
+					      bool outer)
+{
+	const void *nh = th - diff;
+	const void *nh2 = th2 - diff;
+
+	if (((struct iphdr *)nh)->version == 6)
+		return ipv6_gro_flush(nh, nh2);
+	else
+		return inet_gro_flush(nh, nh2, p, outer);
+}
+
+static inline int gro_receive_network_flush(const void *th, const void *th2,
+					    struct sk_buff *p)
+{
+	const bool encap_mark = NAPI_GRO_CB(p)->encap_mark;
+	int off = skb_transport_offset(p);
+	int flush;
+
+	flush = __gro_receive_network_flush(th, th2, p, off - NAPI_GRO_CB(p)->network_offset, encap_mark);
+	if (encap_mark)
+		flush |= __gro_receive_network_flush(th, th2, p, off - NAPI_GRO_CB(p)->inner_network_offset, false);
+
+	return flush;
+}
+
 int skb_gro_receive(struct sk_buff *p, struct sk_buff *skb);
 int skb_gro_receive_list(struct sk_buff *p, struct sk_buff *skb);
 
diff --git a/net/core/gro.c b/net/core/gro.c
index e2f84947fb74..b3b43de1a650 100644
--- a/net/core/gro.c
+++ b/net/core/gro.c
@@ -358,8 +358,6 @@  static void gro_list_prepare(const struct list_head *head,
 	list_for_each_entry(p, head, list) {
 		unsigned long diffs;
 
-		NAPI_GRO_CB(p)->flush = 0;
-
 		if (hash != skb_get_hash_raw(p)) {
 			NAPI_GRO_CB(p)->same_flow = 0;
 			continue;
@@ -499,7 +497,6 @@  static enum gro_result dev_gro_receive(struct napi_struct *napi, struct sk_buff
 					sizeof(u32))); /* Avoid slow unaligned acc */
 	*(u32 *)&NAPI_GRO_CB(skb)->zeroed = 0;
 	NAPI_GRO_CB(skb)->flush = skb_has_frag_list(skb);
-	NAPI_GRO_CB(skb)->is_atomic = 1;
 	NAPI_GRO_CB(skb)->count = 1;
 	if (unlikely(skb_is_gso(skb))) {
 		NAPI_GRO_CB(skb)->count = skb_shinfo(skb)->gso_segs;
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 428196e1541f..44564d009e95 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1482,7 +1482,6 @@  struct sk_buff *inet_gro_receive(struct list_head *head, struct sk_buff *skb)
 	struct sk_buff *p;
 	unsigned int hlen;
 	unsigned int off;
-	unsigned int id;
 	int flush = 1;
 	int proto;
 
@@ -1508,13 +1507,10 @@  struct sk_buff *inet_gro_receive(struct list_head *head, struct sk_buff *skb)
 		goto out;
 
 	NAPI_GRO_CB(skb)->proto = proto;
-	id = ntohl(*(__be32 *)&iph->id);
-	flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF));
-	id >>= 16;
+	flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (ntohl(*(__be32 *)&iph->id) & ~IP_DF));
 
 	list_for_each_entry(p, head, list) {
 		struct iphdr *iph2;
-		u16 flush_id;
 
 		if (!NAPI_GRO_CB(p)->same_flow)
 			continue;
@@ -1531,43 +1527,8 @@  struct sk_buff *inet_gro_receive(struct list_head *head, struct sk_buff *skb)
 			NAPI_GRO_CB(p)->same_flow = 0;
 			continue;
 		}
-
-		/* All fields must match except length and checksum. */
-		NAPI_GRO_CB(p)->flush |=
-			(iph->ttl ^ iph2->ttl) |
-			(iph->tos ^ iph2->tos) |
-			((iph->frag_off ^ iph2->frag_off) & htons(IP_DF));
-
-		NAPI_GRO_CB(p)->flush |= flush;
-
-		/* We need to store of the IP ID check to be included later
-		 * when we can verify that this packet does in fact belong
-		 * to a given flow.
-		 */
-		flush_id = (u16)(id - ntohs(iph2->id));
-
-		/* This bit of code makes it much easier for us to identify
-		 * the cases where we are doing atomic vs non-atomic IP ID
-		 * checks.  Specifically an atomic check can return IP ID
-		 * values 0 - 0xFFFF, while a non-atomic check can only
-		 * return 0 or 0xFFFF.
-		 */
-		if (!NAPI_GRO_CB(p)->is_atomic ||
-		    !(iph->frag_off & htons(IP_DF))) {
-			flush_id ^= NAPI_GRO_CB(p)->count;
-			flush_id = flush_id ? 0xFFFF : 0;
-		}
-
-		/* If the previous IP ID value was based on an atomic
-		 * datagram we can overwrite the value and ignore it.
-		 */
-		if (NAPI_GRO_CB(skb)->is_atomic)
-			NAPI_GRO_CB(p)->flush_id = flush_id;
-		else
-			NAPI_GRO_CB(p)->flush_id |= flush_id;
 	}
 
-	NAPI_GRO_CB(skb)->is_atomic = !!(iph->frag_off & htons(IP_DF));
 	NAPI_GRO_CB(skb)->flush |= flush;
 	NAPI_GRO_CB(skb)->inner_network_offset = off;
 
diff --git a/net/ipv4/tcp_offload.c b/net/ipv4/tcp_offload.c
index 2809667ac924..4b791e74529e 100644
--- a/net/ipv4/tcp_offload.c
+++ b/net/ipv4/tcp_offload.c
@@ -313,10 +313,8 @@  struct sk_buff *tcp_gro_receive(struct list_head *head, struct sk_buff *skb,
 	if (!p)
 		goto out_check_final;
 
-	/* Include the IP ID check below from the inner most IP hdr */
 	th2 = tcp_hdr(p);
-	flush = NAPI_GRO_CB(p)->flush;
-	flush |= (__force int)(flags & TCP_FLAG_CWR);
+	flush = (__force int)(flags & TCP_FLAG_CWR);
 	flush |= (__force int)((flags ^ tcp_flag_word(th2)) &
 		  ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH));
 	flush |= (__force int)(th->ack_seq ^ th2->ack_seq);
@@ -324,16 +322,7 @@  struct sk_buff *tcp_gro_receive(struct list_head *head, struct sk_buff *skb,
 		flush |= *(u32 *)((u8 *)th + i) ^
 			 *(u32 *)((u8 *)th2 + i);
 
-	/* When we receive our second frame we can made a decision on if we
-	 * continue this flow as an atomic flow with a fixed ID or if we use
-	 * an incrementing ID.
-	 */
-	if (NAPI_GRO_CB(p)->flush_id != 1 ||
-	    NAPI_GRO_CB(p)->count != 1 ||
-	    !NAPI_GRO_CB(p)->is_atomic)
-		flush |= NAPI_GRO_CB(p)->flush_id;
-	else
-		NAPI_GRO_CB(p)->is_atomic = false;
+	flush |= gro_receive_network_flush(th, th2, p);
 
 	mss = skb_shinfo(p)->gso_size;
 
@@ -480,7 +469,7 @@  INDIRECT_CALLABLE_SCOPE int tcp4_gro_complete(struct sk_buff *skb, int thoff)
 				  iph->daddr, 0);
 
 	skb_shinfo(skb)->gso_type |= SKB_GSO_TCPV4 |
-			(NAPI_GRO_CB(skb)->is_atomic * SKB_GSO_TCP_FIXEDID);
+			(NAPI_GRO_CB(skb)->ip_fixedid * SKB_GSO_TCP_FIXEDID);
 
 	tcp_gro_complete(skb);
 	return 0;
diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c
index f6d3c442e260..59448a2dbf2c 100644
--- a/net/ipv4/udp_offload.c
+++ b/net/ipv4/udp_offload.c
@@ -478,14 +478,7 @@  static struct sk_buff *udp_gro_receive_segment(struct list_head *head,
 			return p;
 		}
 
-		flush = NAPI_GRO_CB(p)->flush;
-
-		if (NAPI_GRO_CB(p)->flush_id != 1 ||
-		    NAPI_GRO_CB(p)->count != 1 ||
-		    !NAPI_GRO_CB(p)->is_atomic)
-			flush |= NAPI_GRO_CB(p)->flush_id;
-		else
-			NAPI_GRO_CB(p)->is_atomic = false;
+		flush = gro_receive_network_flush(uh, uh2, p);
 
 		/* Terminate the flow on len mismatch or if it grow "too much".
 		 * Under small packet flood GRO count could elsewhere grow a lot
diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c
index 288c7c6ea50f..bd5aff97d8b1 100644
--- a/net/ipv6/ip6_offload.c
+++ b/net/ipv6/ip6_offload.c
@@ -290,19 +290,8 @@  INDIRECT_CALLABLE_SCOPE struct sk_buff *ipv6_gro_receive(struct list_head *head,
 				   nlen - sizeof(struct ipv6hdr)))
 				goto not_same_flow;
 		}
-		/* flush if Traffic Class fields are different */
-		NAPI_GRO_CB(p)->flush |= !!((first_word & htonl(0x0FF00000)) |
-			(__force __be32)(iph->hop_limit ^ iph2->hop_limit));
-		NAPI_GRO_CB(p)->flush |= flush;
-
-		/* If the previous IP ID value was based on an atomic
-		 * datagram we can overwrite the value and ignore it.
-		 */
-		if (NAPI_GRO_CB(skb)->is_atomic)
-			NAPI_GRO_CB(p)->flush_id = 0;
 	}
 
-	NAPI_GRO_CB(skb)->is_atomic = true;
 	NAPI_GRO_CB(skb)->flush |= flush;
 
 	skb_gro_postpull_rcsum(skb, iph, nlen);