| Message ID | 20240930224025.2858767-1-yifei.l.liu@oracle.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | c66be905cda24fb782b91053b196bd2e966f95b7 |
| Headers | show |
| Series | [v5,v6.11,v5.15,v5.4,v4.19,1/1] selftests: breakpoints: use remaining time to check if suspend succeed | expand |
On 9/30/24 16:40, Yifei Liu wrote: > step_after_suspend_test fails with device busy error while > writing to /sys/power/state to start suspend. The test believes > it failed to enter suspend state with > > $ sudo ./step_after_suspend_test > TAP version 13 > Bail out! Failed to enter Suspend state > > However, in the kernel message, I indeed see the system get > suspended and then wake up later. > > [611172.033108] PM: suspend entry (s2idle) > [611172.044940] Filesystems sync: 0.006 seconds > [611172.052254] Freezing user space processes > [611172.059319] Freezing user space processes completed (elapsed 0.001 seconds) > [611172.067920] OOM killer disabled. > [611172.072465] Freezing remaining freezable tasks > [611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) > [611172.089724] printk: Suspending console(s) (use no_console_suspend to debug) > [611172.117126] serial 00:03: disabled > some other hardware get reconnected > [611203.136277] OOM killer enabled. > [611203.140637] Restarting tasks ... > [611203.141135] usb 1-8.1: USB disconnect, device number 7 > [611203.141755] done. > [611203.155268] random: crng reseeded on system resumption > [611203.162059] PM: suspend exit > > After investigation, I noticed that for the code block > if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem")) > ksft_exit_fail_msg("Failed to enter Suspend state\n"); > > The write will return -1 and errno is set to 16 (device busy). > It should be caused by the write function is not successfully returned > before the system suspend and the return value get messed when waking up. > As a result, It may be better to check the time passed of those few > instructions to determine whether the suspend is executed correctly for > it is pretty hard to execute those few lines for 5 seconds. > > The timer to wake up the system is set to expire after 5 seconds and > no re-arm. If the timer remaining time is 0 second and 0 nano secomd, > it means the timer expired and wake the system up. Otherwise, the system > could be considered to enter the suspend state failed if there is any > remaining time. > > After appling this patch, the test would not fail for it believes the > system does not go to suspend by mistake. It now could continue to the > rest part of the test after suspend. > > Fixes: bfd092b8c272 ("selftests: breakpoint: add step_after_suspend_test") > Reported-by: Sinadin Shan <sinadin.shan@oracle.com> > Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com> > --- > v4->v5: Remove the above quotes in the first part. > remove the incorrect format which could confuse the git. Applied to linux-kselftest fixes branch for next rc. thanks, -- Shuah
Thank you! Yiei > On Oct 2, 2024, at 1:38 PM, Shuah Khan <skhan@linuxfoundation.org> wrote: > > On 9/30/24 16:40, Yifei Liu wrote: >> step_after_suspend_test fails with device busy error while >> writing to /sys/power/state to start suspend. The test believes >> it failed to enter suspend state with >> $ sudo ./step_after_suspend_test >> TAP version 13 >> Bail out! Failed to enter Suspend state >> However, in the kernel message, I indeed see the system get >> suspended and then wake up later. >> [611172.033108] PM: suspend entry (s2idle) >> [611172.044940] Filesystems sync: 0.006 seconds >> [611172.052254] Freezing user space processes >> [611172.059319] Freezing user space processes completed (elapsed 0.001 seconds) >> [611172.067920] OOM killer disabled. >> [611172.072465] Freezing remaining freezable tasks >> [611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) >> [611172.089724] printk: Suspending console(s) (use no_console_suspend to debug) >> [611172.117126] serial 00:03: disabled >> some other hardware get reconnected >> [611203.136277] OOM killer enabled. >> [611203.140637] Restarting tasks ... >> [611203.141135] usb 1-8.1: USB disconnect, device number 7 >> [611203.141755] done. >> [611203.155268] random: crng reseeded on system resumption >> [611203.162059] PM: suspend exit >> After investigation, I noticed that for the code block >> if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem")) >> ksft_exit_fail_msg("Failed to enter Suspend state\n"); >> The write will return -1 and errno is set to 16 (device busy). >> It should be caused by the write function is not successfully returned >> before the system suspend and the return value get messed when waking up. >> As a result, It may be better to check the time passed of those few >> instructions to determine whether the suspend is executed correctly for >> it is pretty hard to execute those few lines for 5 seconds. >> The timer to wake up the system is set to expire after 5 seconds and >> no re-arm. If the timer remaining time is 0 second and 0 nano secomd, >> it means the timer expired and wake the system up. Otherwise, the system >> could be considered to enter the suspend state failed if there is any >> remaining time. >> After appling this patch, the test would not fail for it believes the >> system does not go to suspend by mistake. It now could continue to the >> rest part of the test after suspend. >> Fixes: bfd092b8c272 ("selftests: breakpoint: add step_after_suspend_test") >> Reported-by: Sinadin Shan <sinadin.shan@oracle.com> >> Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com> >> --- >> v4->v5: Remove the above quotes in the first part. >> remove the incorrect format which could confuse the git. > > Applied to linux-kselftest fixes branch for next rc. > > thanks, > -- Shuah
diff --git a/tools/testing/selftests/breakpoints/step_after_suspend_test.c b/tools/testing/selftests/breakpoints/step_after_suspend_test.c index dfec31fb9b30d..8d275f03e977f 100644 --- a/tools/testing/selftests/breakpoints/step_after_suspend_test.c +++ b/tools/testing/selftests/breakpoints/step_after_suspend_test.c @@ -152,7 +152,10 @@ void suspend(void) if (err < 0) ksft_exit_fail_msg("timerfd_settime() failed\n"); - if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem")) + system("(echo mem > /sys/power/state) 2> /dev/null"); + + timerfd_gettime(timerfd, &spec); + if (spec.it_value.tv_sec != 0 || spec.it_value.tv_nsec != 0) ksft_exit_fail_msg("Failed to enter Suspend state\n"); close(timerfd);
step_after_suspend_test fails with device busy error while writing to /sys/power/state to start suspend. The test believes it failed to enter suspend state with $ sudo ./step_after_suspend_test TAP version 13 Bail out! Failed to enter Suspend state However, in the kernel message, I indeed see the system get suspended and then wake up later. [611172.033108] PM: suspend entry (s2idle) [611172.044940] Filesystems sync: 0.006 seconds [611172.052254] Freezing user space processes [611172.059319] Freezing user space processes completed (elapsed 0.001 seconds) [611172.067920] OOM killer disabled. [611172.072465] Freezing remaining freezable tasks [611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [611172.089724] printk: Suspending console(s) (use no_console_suspend to debug) [611172.117126] serial 00:03: disabled some other hardware get reconnected [611203.136277] OOM killer enabled. [611203.140637] Restarting tasks ... [611203.141135] usb 1-8.1: USB disconnect, device number 7 [611203.141755] done. [611203.155268] random: crng reseeded on system resumption [611203.162059] PM: suspend exit After investigation, I noticed that for the code block if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem")) ksft_exit_fail_msg("Failed to enter Suspend state\n"); The write will return -1 and errno is set to 16 (device busy). It should be caused by the write function is not successfully returned before the system suspend and the return value get messed when waking up. As a result, It may be better to check the time passed of those few instructions to determine whether the suspend is executed correctly for it is pretty hard to execute those few lines for 5 seconds. The timer to wake up the system is set to expire after 5 seconds and no re-arm. If the timer remaining time is 0 second and 0 nano secomd, it means the timer expired and wake the system up. Otherwise, the system could be considered to enter the suspend state failed if there is any remaining time. After appling this patch, the test would not fail for it believes the system does not go to suspend by mistake. It now could continue to the rest part of the test after suspend. Fixes: bfd092b8c272 ("selftests: breakpoint: add step_after_suspend_test") Reported-by: Sinadin Shan <sinadin.shan@oracle.com> Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com> --- v4->v5: Remove the above quotes in the first part. remove the incorrect format which could confuse the git. --- .../testing/selftests/breakpoints/step_after_suspend_test.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)