mbox series

[v2,0/4] media: sun6i: Add support for the H3 CSI controller

Message ID 20181114145934.26855-1-maxime.ripard@bootlin.com (mailing list archive)
Headers show
Series media: sun6i: Add support for the H3 CSI controller | expand


Maxime Ripard Nov. 14, 2018, 2:59 p.m. UTC

The H3 and H5 have a CSI controller based on the one previously found
in the A31, that is currently supported by the sun6i-csi driver.

Add the compatibles to the device tree bindings and to the driver to
make it work properly.

This obviously depends on the serie "Initial Allwinner V3s CSI
Support" by Yong Deng.

Let me know what you think,

Changes from v1:
  - Rebased on top of latest Yong's series

Maxime Ripard (2):
  dt-bindings: media: sun6i: Add A31 and H3 compatibles
  media: sun6i: Add A31 compatible

Mylène Josserand (2):
  ARM: dts: sun8i: Add the H3/H5 CSI controller
  [DO NOT MERGE] ARM: dts: sun8i: Add CAM500B camera module to the Nano
    Pi M1+

 .../devicetree/bindings/media/sun6i-csi.txt   |  5 +-
 arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 85 +++++++++++++++++++
 arch/arm/boot/dts/sunxi-h3-h5.dtsi            | 22 +++++
 .../platform/sunxi/sun6i-csi/sun6i_csi.c      |  1 +
 4 files changed, 112 insertions(+), 1 deletion(-)