[v6,00/12] imx-media: Fixes for interlaced capture

Message

Steve Longerbeam Jan. 9, 2019, 12:15 a.m. UTC

From: Steve Longerbeam <[e-mail]>

A set of patches that fixes some bugs with capturing from an
interlaced source, and incompatibilites between IDMAC interlace
interweaving and 4:2:0 data write reduction.

History:
v6:
- Changes to patch "gpu: ipu-csi: Swap fields according to input/output
  field types" suggested by Philipp Zabel.

v5:
- Added a regression fix to allow empty endpoints to CSI (fix for imx6q
  SabreAuto).
- Cleaned up some convoluted code in ipu_csi_init_interface(), suggested
  by Philipp Zabel.
- Fixed a regression in csi_setup(), caught by Philipp.
- Removed interweave_offset and replace with boolean interweave_swap,
  suggested by Philipp.
- Make clear that it is IDMAC channel that does pixel reordering and
  interweave, not the CSI, in the imx.rst doc, caught by Philipp.

v4:
- rebased to latest media-tree master branch.
- Make patch author and SoB email addresses the same.

v3:
- add support for/fix interweaved scan with YUV planar output.
- fix bug in 4:2:0 U/V offset macros.
- add patch that generalizes behavior of field swap in
  ipu_csi_init_interface().
- add support for interweaved scan with field order swap.
  Suggested by Philipp Zabel.
- in v2, inteweave scan was determined using field types of
  CSI (and PRPENCVF) at the sink and source pads. In v3, this
  has been moved one hop downstream: interweave is now determined
  using field type at source pad, and field type selected at
  capture interface. Suggested by Philipp.
- make sure to double CSI crop target height when input field
  type in alternate.
- more updates to media driver doc to reflect above.

v2:
- update media driver doc.
- enable idmac interweave only if input field is sequential/alternate,
  and output field is 'interlaced*'.
- move field try logic out of *try_fmt and into separate function.
- fix bug with resetting crop/compose rectangles.
- add a patch that fixes a field order bug in VDIC indirect mode.
- remove alternate field type from V4L2_FIELD_IS_SEQUENTIAL() macro
  Suggested-by: Nicolas Dufresne <[e-mail]>.
- add macro V4L2_FIELD_IS_INTERLACED().


Steve Longerbeam (12):
  media: videodev2.h: Add more field helper macros
  gpu: ipu-csi: Swap fields according to input/output field types
  gpu: ipu-v3: Add planar support to interlaced scan
  media: imx: Fix field negotiation
  media: imx-csi: Input connections to CSI should be optional
  media: imx-csi: Double crop height for alternate fields at sink
  media: imx: interweave and odd-chroma-row skip are incompatible
  media: imx-csi: Allow skipping odd chroma rows for YVU420
  media: imx: vdic: rely on VDIC for correct field order
  media: imx-csi: Move crop/compose reset after filling default mbus
    fields
  media: imx: Allow interweave with top/bottom lines swapped
  media: imx.rst: Update doc to reflect fixes to interlaced capture

 Documentation/media/v4l-drivers/imx.rst       | 103 ++++++++----
 drivers/gpu/ipu-v3/ipu-cpmem.c                |  26 ++-
 drivers/gpu/ipu-v3/ipu-csi.c                  | 126 +++++++++-----
 drivers/staging/media/imx/imx-ic-prpencvf.c   |  46 +++--
 drivers/staging/media/imx/imx-media-capture.c |  14 ++
 drivers/staging/media/imx/imx-media-csi.c     | 158 +++++++++++++-----
 drivers/staging/media/imx/imx-media-vdic.c    |  12 +-
 include/uapi/linux/videodev2.h                |   7 +
 include/video/imx-ipu-v3.h                    |   8 +-
 9 files changed, 355 insertions(+), 145 deletions(-)