| Message ID | 20200803020921.64151-1-santiagohssl@gmail.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | KT0913 FM/AM driver | expand |
Hello Santiago, Nice work and welcome to the kernel community. On Sun, 2020-08-02 at 23:09 -0300, Santiago Hormazabal wrote: > media: adds support for kt0913 FM/AM tuner chip > I don't think this line above should be there. Also, this seems to be v2. You are missing a "PATCH v2" prefix on the patches subject, and a v2 changelog on the cover letter. Some examples for you to look at: https://patchwork.linuxtv.org/project/linux-media/cover/BN6PR04MB06603B2CD7F2C56B322AF882A3710@BN6PR04MB0660.namprd04.prod.outlook.com/ https://patchwork.linuxtv.org/project/linux-media/cover/20200717145324.292820-1-jacopo+renesas@jmondi.org/ The vN+1 subject makes it easier for reviewers to keep track of submissions, and the changelog makes it easier to track the changes. Thanks! Ezequiel > Adds a driver for the KT0913 FM/AM tuner chip from KT Micro. This chip > can be found on many low cost FM/AM radios and DVD/Home Theaters. > The chip provides two ways of usage, a manual mode (requiring only a > few buttons) or complete control via I2C. This driver uses the latter. > It exposes the minimum functionality of this chip, which includes tuning > an AM or FM station given its frequency, reading the signal strength, > setting Stereo (only on FM) or Mono (available on AM/FM), Mute, Volume > and Audio Gain. > I left some TODOs on the code, like supporting the chip's hardware seek > feature, using a RW/RO regmaps rather than a single volatile regmap, > show the FM SNR as a RO control and the FM/AM AFC deviation as another > RO control. > The module I've used comes from SZZSJDZ.com, a now defunct company. > However, it's possible to buy this chip directly from Aliexpress or > similar sites. > I tested this on two systems, the first one being a Raspberry Pi 4 with > the unstable 5.x kernel, but later I moved to a Banana Pi 2 Zero where > I used the (current at this time, 8f2a4a9) master of this repo for testing. > I've also compiled the v4l-compliance from sources (c7f0328) and it passed > all the tests. The output of that is at the end of this note. > > Note: This is the second set of patches for the driver, where I (tried to) > address the comments that the reviewers added on the previous set. > > v4l2-compliance SHA: c7f03287bbd64c168975e7ff3192e6fd3b507686, 32 bits, 32-bit time_t > > Compliance test for kt0913-fm-am device /dev/radio0: > > Driver Info: > Driver name : kt0913-fm-am > Card type : kt0913-fm-am > Bus info : I2C:radio0 > Driver version : 5.8.0 > Capabilities : 0x80250000 > Tuner > Radio > Extended Pix Format > Device Capabilities > Device Caps : 0x00250000 > Tuner > Radio > Extended Pix Format > > Required ioctls: > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/radio0 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > test invalid ioctls: OK > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK > test VIDIOC_LOG_STATUS: OK > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK > test VIDIOC_G/S_FREQUENCY: OK > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 1 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 8 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK (Not Supported) > test VIDIOC_TRY_FMT: OK (Not Supported) > test VIDIOC_S_FMT: OK (Not Supported) > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) > test VIDIOC_EXPBUF: OK (Not Supported) > test Requests: OK (Not Supported) > > Total for kt0913-fm-am device /dev/radio0: 45, Succeeded: 45, Failed: 0, Warnings: 0 > > Santiago Hormazabal (3): > dt-bindings: vendor-prefixes: Add KT Micro > media: kt0913: device tree binding > media: Add support for the AM/FM radio chip KT0913 from KT Micro. > > .../bindings/media/i2c/ktm,kt0913.yaml | 56 + > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > drivers/media/radio/Kconfig | 10 + > drivers/media/radio/Makefile | 1 + > drivers/media/radio/radio-kt0913.c | 1196 +++++++++++++++++ > 5 files changed, 1265 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/ktm,kt0913.yaml > create mode 100644 drivers/media/radio/radio-kt0913.c >