mbox series

[0/6,v2] Support Geekworm MZP280 Panel for Raspberry Pi

Message ID 20220124165526.1104-1-macroalpha82@gmail.com (mailing list archive)
Headers show
Series Support Geekworm MZP280 Panel for Raspberry Pi | expand

Message

Chris Morgan Jan. 24, 2022, 4:55 p.m. UTC 
From: Chris Morgan <macromorgan@hotmail.com>

This patch series is to add support for the MZP280 panel for the
Raspberry Pi. This panel requires adding support for Mode 3 of the
Raspberry Pi DPI connector, which necessitates a new media bus format.

This patch series has been tested on my Raspberry Pi 4 with version 1
of the panel in question.

Changes since V1:

 - Added documentation for vendor string.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>

Chris Morgan (6):
  dt-bindings: vendor-prefixes: Add Geekworm
  media: uapi: Document format MEDIA_BUS_FMT_RGB565_1X24_CPADHI
  media: uapi: add MEDIA_BUS_FMT_RGB565_1X24_CPADHI
  dt-bindings: display: simple: add Geekworm MZP280 Panel
  drm/panel: simple: add Geekworm MZP280 Panel
  drm/vc4: dpi: Support DPI interface in mode3 for RGB565

 .../bindings/display/panel/panel-simple.yaml  |  2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
 .../media/v4l/subdev-formats.rst              | 37 +++++++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c          | 29 +++++++++++++++
 drivers/gpu/drm/vc4/vc4_dpi.c                 |  4 ++
 include/uapi/linux/media-bus-format.h         |  3 +-
 6 files changed, 76 insertions(+), 1 deletion(-)