mbox series

[0/2] media: Add ST VGXY61 camera sensor driver

Message ID 20220310133255.1946530-1-benjamin.mugnier@foss.st.com (mailing list archive)
Headers show
Series media: Add ST VGXY61 camera sensor driver | expand

Message

Benjamin Mugnier March 10, 2022, 1:32 p.m. UTC
Hello,

This series adds a driver for the ST VGXY61 camera sensor.  This camera sensor is using the i2c bus
for control and the csi-2 bus for data.

Tested on DragonBoard 410c and on Raspberry Pi 4. DT bindings are in 1/2, and the driver in
2/2.

Benjamin Mugnier (2):
  media: dt-bindings: media: i2c: Add ST VGXY61 camera sensor binding
  media: i2c: Add driver for ST VGXY61 camera sensor

 .../bindings/media/i2c/st,st-vgxy61.yaml      |  134 ++
 MAINTAINERS                                   |   10 +
 drivers/media/i2c/Kconfig                     |   11 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/st-vgxy61.c                 | 1919 +++++++++++++++++
 5 files changed, 2075 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml
 create mode 100644 drivers/media/i2c/st-vgxy61.c