mbox series

[v7,0/6] Add StarFive Camera Subsystem driver

Message ID 20230619112838.19797-1-jack.zhu@starfivetech.com (mailing list archive)
Headers show
Series Add StarFive Camera Subsystem driver | expand

Message

Jack Zhu June 19, 2023, 11:28 a.m. UTC
Hi,

This series is the v7 series that attempts to support the Camera Subsystem
found on StarFive JH7110 SoC.

The following are the media graph for the device and the v4l2-compliance
output.

===========================================================================
[the media graph]:

digraph board {
	rankdir=TB
	n00000001 [label="{{<port0> 0} | stf_isp0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
	n00000001:port1 -> n0000000d:port0 [style=dashed]
	n00000004 [label="{{<port0> 0} | stf_vin0_wr\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
	n00000004:port1 -> n00000007 [style=bold]
	n00000007 [label="stf_vin0_wr_video0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
	n0000000d [label="{{<port0> 0} | stf_vin0_isp0\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
	n0000000d:port1 -> n00000010 [style=bold]
	n00000010 [label="stf_vin0_isp0_video1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
	n00000018 [label="{{<port0> 0} | cdns_csi2rx.19800000.csi-bridge\n | {<port1> 1 | <port2> 2 | <port3> 3 | <port4> 4}}", shape=Mrecord, style=filled, fillcolor=green]
	n00000018:port1 -> n00000004:port0 [style=dashed]
	n00000018:port1 -> n00000001:port0 [style=dashed]
	n00000022 [label="{{} | imx219 6-0010\n/dev/v4l-subdev3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
	n00000022:port0 -> n00000018:port0 [style=bold]
}

[the device topology]:

Media controller API version 6.4.0

Media device information
------------------------
driver          starfive-camss
model           Starfive Camera Subsystem
serial          
bus info        platform:19840000.camss
hw revision     0x0
driver version  6.4.0

Device topology
- entity 1: stf_isp0 (2 pads, 2 links)
            type V4L2 subdev subtype Unknown flags 0
            device node name /dev/v4l-subdev0
	pad0: Sink
		[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:srgb
		 crop.bounds:(0,0)/1920x1080
		 crop:(0,0)/1920x1080]
		<- "cdns_csi2rx.19800000.csi-bridge":1 []
	pad1: Source
		[fmt:Y12_1X12/1920x1080 field:none colorspace:srgb
		 crop.bounds:(0,0)/1920x1080
		 crop:(0,0)/1920x1080]
		-> "stf_vin0_isp0":0 []

- entity 4: stf_vin0_wr (2 pads, 2 links)
            type V4L2 subdev subtype Unknown flags 0
            device node name /dev/v4l-subdev1
	pad0: Sink
		[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:srgb]
		<- "cdns_csi2rx.19800000.csi-bridge":1 []
	pad1: Source
		[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:srgb]
		-> "stf_vin0_wr_video0":0 [ENABLED,IMMUTABLE]

- entity 7: stf_vin0_wr_video0 (1 pad, 1 link)
            type Node subtype V4L flags 0
            device node name /dev/video0
	pad0: Sink
		<- "stf_vin0_wr":1 [ENABLED,IMMUTABLE]

- entity 13: stf_vin0_isp0 (2 pads, 2 links)
             type V4L2 subdev subtype Unknown flags 0
             device node name /dev/v4l-subdev2
	pad0: Sink
		[fmt:Y12_1X12/1920x1080 field:none colorspace:srgb]
		<- "stf_isp0":1 []
	pad1: Source
		[fmt:Y12_1X12/1920x1080 field:none colorspace:srgb]
		-> "stf_vin0_isp0_video1":0 [ENABLED,IMMUTABLE]

- entity 16: stf_vin0_isp0_video1 (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video1
	pad0: Sink
		<- "stf_vin0_isp0":1 [ENABLED,IMMUTABLE]

- entity 24: cdns_csi2rx.19800000.csi-bridge (5 pads, 3 links)
             type V4L2 subdev subtype Unknown flags 0
	pad0: Sink
		<- "imx219 6-0010":0 [ENABLED,IMMUTABLE]
	pad1: Source
		-> "stf_vin0_wr":0 []
		-> "stf_isp0":0 []
	pad2: Source
	pad3: Source
	pad4: Source

- entity 34: imx219 6-0010 (1 pad, 1 link)
             type V4L2 subdev subtype Sensor flags 0
             device node name /dev/v4l-subdev3
	pad0: Source
		[fmt:SRGGB10_1X10/3280x2464 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range
		 crop.bounds:(8,8)/3280x2464
		 crop:(8,8)/3280x2464]
		-> "cdns_csi2rx.19800000.csi-bridge":0 [ENABLED,IMMUTABLE]

===========================================================================
[the v4l2-compliance output]:

v4l2-compliance -s -d /dev/video1
v4l2-compliance 1.24.1, 64 bits, 64-bit time_t

Compliance test for stf camss device /dev/video1:

Driver Info:
	Driver name      : stf camss
	Card type        : Starfive Camera Subsystem
	Bus info         : platform:19840000.camss
	Driver version   : 6.4.0
	Capabilities     : 0x85200001
		Video Capture
		Read/Write
		Streaming
		Extended Pix Format
		Device Capabilities
	Device Caps      : 0x05200001
		Video Capture
		Read/Write
		Streaming
		Extended Pix Format
Media Driver Info:
	Driver name      : starfive-camss
	Model            : Starfive Camera Subsystem
	Serial           : 
	Bus info         : platform:19840000.camss
	Media version    : 6.4.0
	Hardware revision: 0x00000000 (0)
	Driver version   : 6.4.0
Interface Info:
	ID               : 0x03000012
	Type             : V4L Video
Entity Info:
	ID               : 0x00000010 (16)
	Name             : stf_vin0_isp0_video1
	Function         : V4L2 I/O
	Pad 0x01000011   : 0: Sink
	  Link 0x02000014: from remote pad 0x100000f of entity 'stf_vin0_isp0' (Video Pixel Formatter): Data, Enabled, Immutable

Required ioctls:
	test MC information (see 'Media Driver Info' above): OK
	test VIDIOC_QUERYCAP: OK
	test invalid ioctls: OK

Allow for multiple opens:
	test second /dev/video1 open: OK
	test VIDIOC_QUERYCAP: OK
	test VIDIOC_G/S_PRIORITY: OK
	test for unlimited opens: OK

Debug ioctls:
	test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
	test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
	test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
	test VIDIOC_QUERYCTRL: OK (Not Supported)
	test VIDIOC_G/S_CTRL: OK (Not Supported)
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 0 Private Controls: 0

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	test VIDIOC_G/S_PARM: OK (Not Supported)
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK
	test VIDIOC_TRY_FMT: OK
	test VIDIOC_S_FMT: OK
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK (Not Supported)
	test Composing: OK (Not Supported)
	test Scaling: OK

Codec ioctls:
	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
	test VIDIOC_EXPBUF: OK
	test Requests: OK (Not Supported)

Test input 0:

Streaming ioctls:
	test read/write: OK
	test blocking wait: OK
	test MMAP (no poll): OK                           
	test MMAP (select): OK                            
	test MMAP (epoll): OK                             
	test USERPTR (no poll): OK (Not Supported)
	test USERPTR (select): OK (Not Supported)
	test DMABUF: Cannot test, specify --expbuf-device

Total for stf camss device /dev/video1: 53, Succeeded: 53, Failed: 0, Warnings: 0

===========================================================================

Changes in v7:
- HAS_DMA is used instead of DMA_CMA in Kconfig.
- Dropped some non-essential member variables.
- Used v4l2_async_nf_add_fwnode_remote() to simplify the relevant code.
- Modified some Local variable types in the function.
- Used v4l2_create_fwnode_links_to_pad() to simplify the relevant code.
- Added error handling for clk_prepare_enable().
- Simplified stfcamss_format_info struct and modified the relevant code.
- Dropped enum_input, g_input and s_input.
- Unified v4l2_ioctl_ops struct.
- Used v4l2_fh_open()/vb2_fop_release to replace deprecated APIs.
- Added a camss directory under the starfive directory and modified the
  patch title.

v6 link: https://lore.kernel.org/all/20230525083202.67933-1-jack.zhu@starfivetech.com/

Changes in v6:
- Added 'bus-type' in bindings example.
- Corrected spelling errors.
- As reviewed by Bryan, used 'nclks' and 'nrsts' variables.
- Added lccf config for ISP.

v5 link: https://lore.kernel.org/all/20230512102844.51084-1-jack.zhu@starfivetech.com/

Changes in v5:
- Rebased on v6.4-rc1.
- Added new patch.
- Modified ISP driver.

v4 link: https://lore.kernel.org/all/20230413035541.62129-1-jack.zhu@starfivetech.com/

Previous cover letter from v4:

This patch series adds support for the StarFive Camera Subsystem
found on StarFive JH7110 SoC.

The driver implements V4L2, Media controller and V4L2 subdev interfaces.
Camera sensor using V4L2 subdev interface in the kernel is supported.

The driver is tested on VisionFive V2 board with IMX219 camera sensor.
GStreamer 1.18.5 with v4l2src plugin is supported.

Changes since v3:
Patch 1:
- Modified port@0 and port@1 properties.
- Extended the port@0 example with appropriate properties.
- Added 'port@0' for 'required'
Patch 2:
- Modified spelling errors.
Patch 3:
- Merged patch 5 into the patch with an explanation for compatible in
  commit msg.
Patch 6:
- Asserted pixel_rst[i] reset in the loop after the err_disable_pixclk
  label.
- Modified Code Style for getting sys_rst and p_rst.
- Renamed clk_name to name and modified the relevant code.
Patch 9:
- Added static for stfcamss_get_mem_res function.
- Added static for isp_close function.
- Fixed implicit conversion warning for stf_vin_map_isp_pad function.
- Dropped unused variables.

  v3: https://lore.kernel.org/all/20230331121826.96973-1-jack.zhu@starfivetech.com/

Changes since v2:
- Rebased on v6.3-rc1.
Patch 1:
- Modified spelling errors.
- Added port@0.
- Modified '$ref' of port.
- Added 'ports' to 'required'.
- Dropped 'stfcamss' label in example.
- Added port@0 in example.
- Added MAINTAINERS file.
Patch 2:
- Split this patch into three new patches.
- Modified compatible property.
- Replaced clock names with the existing names.
- Modified 'bus-type' and 'clock-lanes'
- Added port@2 - port@4
- Dropped 'csi2rx' label in example.
Patch 3:
- Updated rst and dot file as three pipelines were deleted.
Patch 4:
- Split this patch into three new patches.
- Dropped .s_power() and .get_fmt().
- Dropped CSI-2 DT support.
- Dropped v4l2_device_register_subdev_nodes().
- Used assigned-clock-rates in DT to set clk value.
- Modified 'compatible' field.
Patch 5:
- Deleted three pipelines. 
- Modified 'stfcamss_clocks'/'stfcamss_resets' struct.
- Dropped stfcamss_find_sensor() function.
- Removed redundant code from stfcamss_of_parse_endpoint_node().
- Modified spelling errors.
- Rewrote stfcamss_reg_media_subdev_node() function.
- Modified stfcamss_subdev_notifier_bound().
- Modified stfcamss_probe() function.
- Dropped stfcamss_suspend() and stfcamss_resume().
- Dropped dev_info() in stfcamss_remove() function.
- Added 'stf_' prefix for enum subdev_type.
- Moved all includes to the top in stf_camss.h file.
- Dropped unused fields in stfcamss struct.
- Replaced Custom logging macros with regular macros.
- Rewrote register read and write functions.
- Used lowercase for all hex constants.
- Used macro to name registers.
- Dropped unused ioctl and stf_isp_ioctl.h file.

  v2: https://lore.kernel.org/all/20230310120553.60586-1-jack.zhu@starfivetech.com/

Changes since v1:
- Deleted starfive,jh7110-mipi-csi2.yaml.
- Converted cdns,csi2rx.txt to cdns,csi2rx.yaml and added ‘resets’
  properties.
- Added ‘cdns,csi2rx.yaml’ in ‘CADENCE MIPI-CSI2 BRIDGES’ entry.
- The following contents were modified in starfive,jh7110-camss.yaml:
  dropped quotes from ’id’ and ‘schema’; dropped ‘|’ for ‘description’;
  corrected the wrong or redundant words: ‘a ISP’, ‘PD ISP’;
  dropped ‘minItems’ for ‘reg’, ‘clocks’, ‘resets’ and ‘interrupts’;
  dropped the '_clk' and 'rst_' prefix about the 'clock-names' and
  'reset-names';
  changed ‘endpoint@1’ to ‘endpoint’; updated examples;
- Updated Subject for some patches.
- Merged patch 6, 7, 8, 9, 10, 11 into one patch.

Jack Zhu (6):
  media: dt-bindings: Add JH7110 Camera Subsystem
  media: admin-guide: Add starfive_camss.rst for Starfive Camera
    Subsystem
  media: starfive: camss: Add basic driver
  media: starfive: camss: Add video driver
  media: starfive: camss: Add ISP driver
  media: starfive: camss: Add VIN driver

 .../admin-guide/media/starfive_camss.rst      |   57 +
 .../media/starfive_camss_graph.dot            |   16 +
 .../admin-guide/media/v4l-drivers.rst         |    1 +
 .../bindings/media/starfive,jh7110-camss.yaml |  180 +++
 MAINTAINERS                                   |    9 +
 drivers/media/platform/Kconfig                |    1 +
 drivers/media/platform/Makefile               |    1 +
 drivers/media/platform/starfive/Kconfig       |    5 +
 drivers/media/platform/starfive/Makefile      |    2 +
 drivers/media/platform/starfive/camss/Kconfig |   16 +
 .../media/platform/starfive/camss/Makefile    |   14 +
 .../media/platform/starfive/camss/stf_camss.c |  444 +++++++
 .../media/platform/starfive/camss/stf_camss.h |  151 +++
 .../media/platform/starfive/camss/stf_isp.c   |  519 ++++++++
 .../media/platform/starfive/camss/stf_isp.h   |  479 ++++++++
 .../platform/starfive/camss/stf_isp_hw_ops.c  |  468 ++++++++
 .../media/platform/starfive/camss/stf_video.c |  724 +++++++++++
 .../media/platform/starfive/camss/stf_video.h |   92 ++
 .../media/platform/starfive/camss/stf_vin.c   | 1069 +++++++++++++++++
 .../media/platform/starfive/camss/stf_vin.h   |  173 +++
 .../platform/starfive/camss/stf_vin_hw_ops.c  |  192 +++
 21 files changed, 4613 insertions(+)
 create mode 100644 Documentation/admin-guide/media/starfive_camss.rst
 create mode 100644 Documentation/admin-guide/media/starfive_camss_graph.dot
 create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
 create mode 100644 drivers/media/platform/starfive/Kconfig
 create mode 100644 drivers/media/platform/starfive/Makefile
 create mode 100644 drivers/media/platform/starfive/camss/Kconfig
 create mode 100644 drivers/media/platform/starfive/camss/Makefile
 create mode 100644 drivers/media/platform/starfive/camss/stf_camss.c
 create mode 100644 drivers/media/platform/starfive/camss/stf_camss.h
 create mode 100644 drivers/media/platform/starfive/camss/stf_isp.c
 create mode 100644 drivers/media/platform/starfive/camss/stf_isp.h
 create mode 100644 drivers/media/platform/starfive/camss/stf_isp_hw_ops.c
 create mode 100644 drivers/media/platform/starfive/camss/stf_video.c
 create mode 100644 drivers/media/platform/starfive/camss/stf_video.h
 create mode 100644 drivers/media/platform/starfive/camss/stf_vin.c
 create mode 100644 drivers/media/platform/starfive/camss/stf_vin.h
 create mode 100644 drivers/media/platform/starfive/camss/stf_vin_hw_ops.c

Comments

Jack Zhu July 10, 2023, 5:45 a.m. UTC | #1
On 2023/6/19 19:28, Jack Zhu wrote:
> Hi,
> 
> This series is the v7 series that attempts to support the Camera Subsystem
> found on StarFive JH7110 SoC.
> 

Hi everyone,

Could you please help to review and give your comments? 
Thanks a lot!

> The following are the media graph for the device and the v4l2-compliance
> output.
> 
> ===========================================================================
> [the media graph]:
> 
> digraph board {
> 	rankdir=TB
> 	n00000001 [label="{{<port0> 0} | stf_isp0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> 	n00000001:port1 -> n0000000d:port0 [style=dashed]
> 	n00000004 [label="{{<port0> 0} | stf_vin0_wr\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> 	n00000004:port1 -> n00000007 [style=bold]
> 	n00000007 [label="stf_vin0_wr_video0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
> 	n0000000d [label="{{<port0> 0} | stf_vin0_isp0\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> 	n0000000d:port1 -> n00000010 [style=bold]
> 	n00000010 [label="stf_vin0_isp0_video1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
> 	n00000018 [label="{{<port0> 0} | cdns_csi2rx.19800000.csi-bridge\n | {<port1> 1 | <port2> 2 | <port3> 3 | <port4> 4}}", shape=Mrecord, style=filled, fillcolor=green]
> 	n00000018:port1 -> n00000004:port0 [style=dashed]
> 	n00000018:port1 -> n00000001:port0 [style=dashed]
> 	n00000022 [label="{{} | imx219 6-0010\n/dev/v4l-subdev3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
> 	n00000022:port0 -> n00000018:port0 [style=bold]
> }
> 
> [the device topology]:
> 
> Media controller API version 6.4.0
> 
> Media device information
> ------------------------
> driver          starfive-camss
> model           Starfive Camera Subsystem
> serial          
> bus info        platform:19840000.camss
> hw revision     0x0
> driver version  6.4.0
> 
> Device topology
> - entity 1: stf_isp0 (2 pads, 2 links)
>             type V4L2 subdev subtype Unknown flags 0
>             device node name /dev/v4l-subdev0
> 	pad0: Sink
> 		[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:srgb
> 		 crop.bounds:(0,0)/1920x1080
> 		 crop:(0,0)/1920x1080]
> 		<- "cdns_csi2rx.19800000.csi-bridge":1 []
> 	pad1: Source
> 		[fmt:Y12_1X12/1920x1080 field:none colorspace:srgb
> 		 crop.bounds:(0,0)/1920x1080
> 		 crop:(0,0)/1920x1080]
> 		-> "stf_vin0_isp0":0 []
> 
> - entity 4: stf_vin0_wr (2 pads, 2 links)
>             type V4L2 subdev subtype Unknown flags 0
>             device node name /dev/v4l-subdev1
> 	pad0: Sink
> 		[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:srgb]
> 		<- "cdns_csi2rx.19800000.csi-bridge":1 []
> 	pad1: Source
> 		[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:srgb]
> 		-> "stf_vin0_wr_video0":0 [ENABLED,IMMUTABLE]
> 
> - entity 7: stf_vin0_wr_video0 (1 pad, 1 link)
>             type Node subtype V4L flags 0
>             device node name /dev/video0
> 	pad0: Sink
> 		<- "stf_vin0_wr":1 [ENABLED,IMMUTABLE]
> 
> - entity 13: stf_vin0_isp0 (2 pads, 2 links)
>              type V4L2 subdev subtype Unknown flags 0
>              device node name /dev/v4l-subdev2
> 	pad0: Sink
> 		[fmt:Y12_1X12/1920x1080 field:none colorspace:srgb]
> 		<- "stf_isp0":1 []
> 	pad1: Source
> 		[fmt:Y12_1X12/1920x1080 field:none colorspace:srgb]
> 		-> "stf_vin0_isp0_video1":0 [ENABLED,IMMUTABLE]
> 
> - entity 16: stf_vin0_isp0_video1 (1 pad, 1 link)
>              type Node subtype V4L flags 0
>              device node name /dev/video1
> 	pad0: Sink
> 		<- "stf_vin0_isp0":1 [ENABLED,IMMUTABLE]
> 
> - entity 24: cdns_csi2rx.19800000.csi-bridge (5 pads, 3 links)
>              type V4L2 subdev subtype Unknown flags 0
> 	pad0: Sink
> 		<- "imx219 6-0010":0 [ENABLED,IMMUTABLE]
> 	pad1: Source
> 		-> "stf_vin0_wr":0 []
> 		-> "stf_isp0":0 []
> 	pad2: Source
> 	pad3: Source
> 	pad4: Source
> 
> - entity 34: imx219 6-0010 (1 pad, 1 link)
>              type V4L2 subdev subtype Sensor flags 0
>              device node name /dev/v4l-subdev3
> 	pad0: Source
> 		[fmt:SRGGB10_1X10/3280x2464 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range
> 		 crop.bounds:(8,8)/3280x2464
> 		 crop:(8,8)/3280x2464]
> 		-> "cdns_csi2rx.19800000.csi-bridge":0 [ENABLED,IMMUTABLE]
> 
> ===========================================================================
> [the v4l2-compliance output]:
> 
> v4l2-compliance -s -d /dev/video1
> v4l2-compliance 1.24.1, 64 bits, 64-bit time_t
> 
> Compliance test for stf camss device /dev/video1:
> 
> Driver Info:
> 	Driver name      : stf camss
> 	Card type        : Starfive Camera Subsystem
> 	Bus info         : platform:19840000.camss
> 	Driver version   : 6.4.0
> 	Capabilities     : 0x85200001
> 		Video Capture
> 		Read/Write
> 		Streaming
> 		Extended Pix Format
> 		Device Capabilities
> 	Device Caps      : 0x05200001
> 		Video Capture
> 		Read/Write
> 		Streaming
> 		Extended Pix Format
> Media Driver Info:
> 	Driver name      : starfive-camss
> 	Model            : Starfive Camera Subsystem
> 	Serial           : 
> 	Bus info         : platform:19840000.camss
> 	Media version    : 6.4.0
> 	Hardware revision: 0x00000000 (0)
> 	Driver version   : 6.4.0
> Interface Info:
> 	ID               : 0x03000012
> 	Type             : V4L Video
> Entity Info:
> 	ID               : 0x00000010 (16)
> 	Name             : stf_vin0_isp0_video1
> 	Function         : V4L2 I/O
> 	Pad 0x01000011   : 0: Sink
> 	  Link 0x02000014: from remote pad 0x100000f of entity 'stf_vin0_isp0' (Video Pixel Formatter): Data, Enabled, Immutable
> 
> Required ioctls:
> 	test MC information (see 'Media Driver Info' above): OK
> 	test VIDIOC_QUERYCAP: OK
> 	test invalid ioctls: OK
> 
> Allow for multiple opens:
> 	test second /dev/video1 open: OK
> 	test VIDIOC_QUERYCAP: OK
> 	test VIDIOC_G/S_PRIORITY: OK
> 	test for unlimited opens: OK
> 
> Debug ioctls:
> 	test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> 	test VIDIOC_LOG_STATUS: OK (Not Supported)
> 
> Input ioctls:
> 	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> 	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> 	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> 	test VIDIOC_ENUMAUDIO: OK (Not Supported)
> 	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> 	test VIDIOC_G/S_AUDIO: OK (Not Supported)
> 	Inputs: 0 Audio Inputs: 0 Tuners: 0
> 
> Output ioctls:
> 	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> 	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> 	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> 	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> 	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> 	Outputs: 0 Audio Outputs: 0 Modulators: 0
> 
> Input/Output configuration ioctls:
> 	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> 	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> 	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> 	test VIDIOC_G/S_EDID: OK (Not Supported)
> 
> Control ioctls:
> 	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> 	test VIDIOC_QUERYCTRL: OK (Not Supported)
> 	test VIDIOC_G/S_CTRL: OK (Not Supported)
> 	test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> 	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> 	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> 	Standard Controls: 0 Private Controls: 0
> 
> Format ioctls:
> 	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> 	test VIDIOC_G/S_PARM: OK (Not Supported)
> 	test VIDIOC_G_FBUF: OK (Not Supported)
> 	test VIDIOC_G_FMT: OK
> 	test VIDIOC_TRY_FMT: OK
> 	test VIDIOC_S_FMT: OK
> 	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> 	test Cropping: OK (Not Supported)
> 	test Composing: OK (Not Supported)
> 	test Scaling: OK
> 
> Codec ioctls:
> 	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> 	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> 	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> 
> Buffer ioctls:
> 	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> 	test VIDIOC_EXPBUF: OK
> 	test Requests: OK (Not Supported)
> 
> Test input 0:
> 
> Streaming ioctls:
> 	test read/write: OK
> 	test blocking wait: OK
> 	test MMAP (no poll): OK                           
> 	test MMAP (select): OK                            
> 	test MMAP (epoll): OK                             
> 	test USERPTR (no poll): OK (Not Supported)
> 	test USERPTR (select): OK (Not Supported)
> 	test DMABUF: Cannot test, specify --expbuf-device
> 
> Total for stf camss device /dev/video1: 53, Succeeded: 53, Failed: 0, Warnings: 0
> 
> ===========================================================================
> 
> Changes in v7:
> - HAS_DMA is used instead of DMA_CMA in Kconfig.
> - Dropped some non-essential member variables.
> - Used v4l2_async_nf_add_fwnode_remote() to simplify the relevant code.
> - Modified some Local variable types in the function.
> - Used v4l2_create_fwnode_links_to_pad() to simplify the relevant code.
> - Added error handling for clk_prepare_enable().
> - Simplified stfcamss_format_info struct and modified the relevant code.
> - Dropped enum_input, g_input and s_input.
> - Unified v4l2_ioctl_ops struct.
> - Used v4l2_fh_open()/vb2_fop_release to replace deprecated APIs.
> - Added a camss directory under the starfive directory and modified the
>   patch title.
> 
> v6 link: https://lore.kernel.org/all/20230525083202.67933-1-jack.zhu@starfivetech.com/
> 
> Changes in v6:
> - Added 'bus-type' in bindings example.
> - Corrected spelling errors.
> - As reviewed by Bryan, used 'nclks' and 'nrsts' variables.
> - Added lccf config for ISP.
> 
> v5 link: https://lore.kernel.org/all/20230512102844.51084-1-jack.zhu@starfivetech.com/
> 
> Changes in v5:
> - Rebased on v6.4-rc1.
> - Added new patch.
> - Modified ISP driver.
> 
> v4 link: https://lore.kernel.org/all/20230413035541.62129-1-jack.zhu@starfivetech.com/
> 
> Previous cover letter from v4:
> 
> This patch series adds support for the StarFive Camera Subsystem
> found on StarFive JH7110 SoC.
> 
> The driver implements V4L2, Media controller and V4L2 subdev interfaces.
> Camera sensor using V4L2 subdev interface in the kernel is supported.
> 
> The driver is tested on VisionFive V2 board with IMX219 camera sensor.
> GStreamer 1.18.5 with v4l2src plugin is supported.
> 
> Changes since v3:
> Patch 1:
> - Modified port@0 and port@1 properties.
> - Extended the port@0 example with appropriate properties.
> - Added 'port@0' for 'required'
> Patch 2:
> - Modified spelling errors.
> Patch 3:
> - Merged patch 5 into the patch with an explanation for compatible in
>   commit msg.
> Patch 6:
> - Asserted pixel_rst[i] reset in the loop after the err_disable_pixclk
>   label.
> - Modified Code Style for getting sys_rst and p_rst.
> - Renamed clk_name to name and modified the relevant code.
> Patch 9:
> - Added static for stfcamss_get_mem_res function.
> - Added static for isp_close function.
> - Fixed implicit conversion warning for stf_vin_map_isp_pad function.
> - Dropped unused variables.
> 
>   v3: https://lore.kernel.org/all/20230331121826.96973-1-jack.zhu@starfivetech.com/
> 
> Changes since v2:
> - Rebased on v6.3-rc1.
> Patch 1:
> - Modified spelling errors.
> - Added port@0.
> - Modified '$ref' of port.
> - Added 'ports' to 'required'.
> - Dropped 'stfcamss' label in example.
> - Added port@0 in example.
> - Added MAINTAINERS file.
> Patch 2:
> - Split this patch into three new patches.
> - Modified compatible property.
> - Replaced clock names with the existing names.
> - Modified 'bus-type' and 'clock-lanes'
> - Added port@2 - port@4
> - Dropped 'csi2rx' label in example.
> Patch 3:
> - Updated rst and dot file as three pipelines were deleted.
> Patch 4:
> - Split this patch into three new patches.
> - Dropped .s_power() and .get_fmt().
> - Dropped CSI-2 DT support.
> - Dropped v4l2_device_register_subdev_nodes().
> - Used assigned-clock-rates in DT to set clk value.
> - Modified 'compatible' field.
> Patch 5:
> - Deleted three pipelines. 
> - Modified 'stfcamss_clocks'/'stfcamss_resets' struct.
> - Dropped stfcamss_find_sensor() function.
> - Removed redundant code from stfcamss_of_parse_endpoint_node().
> - Modified spelling errors.
> - Rewrote stfcamss_reg_media_subdev_node() function.
> - Modified stfcamss_subdev_notifier_bound().
> - Modified stfcamss_probe() function.
> - Dropped stfcamss_suspend() and stfcamss_resume().
> - Dropped dev_info() in stfcamss_remove() function.
> - Added 'stf_' prefix for enum subdev_type.
> - Moved all includes to the top in stf_camss.h file.
> - Dropped unused fields in stfcamss struct.
> - Replaced Custom logging macros with regular macros.
> - Rewrote register read and write functions.
> - Used lowercase for all hex constants.
> - Used macro to name registers.
> - Dropped unused ioctl and stf_isp_ioctl.h file.
> 
>   v2: https://lore.kernel.org/all/20230310120553.60586-1-jack.zhu@starfivetech.com/
> 
> Changes since v1:
> - Deleted starfive,jh7110-mipi-csi2.yaml.
> - Converted cdns,csi2rx.txt to cdns,csi2rx.yaml and added ‘resets’
>   properties.
> - Added ‘cdns,csi2rx.yaml’ in ‘CADENCE MIPI-CSI2 BRIDGES’ entry.
> - The following contents were modified in starfive,jh7110-camss.yaml:
>   dropped quotes from ’id’ and ‘schema’; dropped ‘|’ for ‘description’;
>   corrected the wrong or redundant words: ‘a ISP’, ‘PD ISP’;
>   dropped ‘minItems’ for ‘reg’, ‘clocks’, ‘resets’ and ‘interrupts’;
>   dropped the '_clk' and 'rst_' prefix about the 'clock-names' and
>   'reset-names';
>   changed ‘endpoint@1’ to ‘endpoint’; updated examples;
> - Updated Subject for some patches.
> - Merged patch 6, 7, 8, 9, 10, 11 into one patch.
> 
> Jack Zhu (6):
>   media: dt-bindings: Add JH7110 Camera Subsystem
>   media: admin-guide: Add starfive_camss.rst for Starfive Camera
>     Subsystem
>   media: starfive: camss: Add basic driver
>   media: starfive: camss: Add video driver
>   media: starfive: camss: Add ISP driver
>   media: starfive: camss: Add VIN driver
> 
>  .../admin-guide/media/starfive_camss.rst      |   57 +
>  .../media/starfive_camss_graph.dot            |   16 +
>  .../admin-guide/media/v4l-drivers.rst         |    1 +
>  .../bindings/media/starfive,jh7110-camss.yaml |  180 +++
>  MAINTAINERS                                   |    9 +
>  drivers/media/platform/Kconfig                |    1 +
>  drivers/media/platform/Makefile               |    1 +
>  drivers/media/platform/starfive/Kconfig       |    5 +
>  drivers/media/platform/starfive/Makefile      |    2 +
>  drivers/media/platform/starfive/camss/Kconfig |   16 +
>  .../media/platform/starfive/camss/Makefile    |   14 +
>  .../media/platform/starfive/camss/stf_camss.c |  444 +++++++
>  .../media/platform/starfive/camss/stf_camss.h |  151 +++
>  .../media/platform/starfive/camss/stf_isp.c   |  519 ++++++++
>  .../media/platform/starfive/camss/stf_isp.h   |  479 ++++++++
>  .../platform/starfive/camss/stf_isp_hw_ops.c  |  468 ++++++++
>  .../media/platform/starfive/camss/stf_video.c |  724 +++++++++++
>  .../media/platform/starfive/camss/stf_video.h |   92 ++
>  .../media/platform/starfive/camss/stf_vin.c   | 1069 +++++++++++++++++
>  .../media/platform/starfive/camss/stf_vin.h   |  173 +++
>  .../platform/starfive/camss/stf_vin_hw_ops.c  |  192 +++
>  21 files changed, 4613 insertions(+)
>  create mode 100644 Documentation/admin-guide/media/starfive_camss.rst
>  create mode 100644 Documentation/admin-guide/media/starfive_camss_graph.dot
>  create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
>  create mode 100644 drivers/media/platform/starfive/Kconfig
>  create mode 100644 drivers/media/platform/starfive/Makefile
>  create mode 100644 drivers/media/platform/starfive/camss/Kconfig
>  create mode 100644 drivers/media/platform/starfive/camss/Makefile
>  create mode 100644 drivers/media/platform/starfive/camss/stf_camss.c
>  create mode 100644 drivers/media/platform/starfive/camss/stf_camss.h
>  create mode 100644 drivers/media/platform/starfive/camss/stf_isp.c
>  create mode 100644 drivers/media/platform/starfive/camss/stf_isp.h
>  create mode 100644 drivers/media/platform/starfive/camss/stf_isp_hw_ops.c
>  create mode 100644 drivers/media/platform/starfive/camss/stf_video.c
>  create mode 100644 drivers/media/platform/starfive/camss/stf_video.h
>  create mode 100644 drivers/media/platform/starfive/camss/stf_vin.c
>  create mode 100644 drivers/media/platform/starfive/camss/stf_vin.h
>  create mode 100644 drivers/media/platform/starfive/camss/stf_vin_hw_ops.c
>
Jack Zhu July 26, 2023, 7:28 a.m. UTC | #2
Hi Laurent, Bryan,

Could you please help to review? Thank you for your time!

On 2023/6/19 19:28, Jack Zhu wrote:
> Hi,
> 
> This series is the v7 series that attempts to support the Camera Subsystem
> found on StarFive JH7110 SoC.
> 
> The following are the media graph for the device and the v4l2-compliance
> output.
> 
> ===========================================================================
> [the media graph]:
> 
> digraph board {
> 	rankdir=TB
> 	n00000001 [label="{{<port0> 0} | stf_isp0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> 	n00000001:port1 -> n0000000d:port0 [style=dashed]
> 	n00000004 [label="{{<port0> 0} | stf_vin0_wr\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> 	n00000004:port1 -> n00000007 [style=bold]
> 	n00000007 [label="stf_vin0_wr_video0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
> 	n0000000d [label="{{<port0> 0} | stf_vin0_isp0\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> 	n0000000d:port1 -> n00000010 [style=bold]
> 	n00000010 [label="stf_vin0_isp0_video1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
> 	n00000018 [label="{{<port0> 0} | cdns_csi2rx.19800000.csi-bridge\n | {<port1> 1 | <port2> 2 | <port3> 3 | <port4> 4}}", shape=Mrecord, style=filled, fillcolor=green]
> 	n00000018:port1 -> n00000004:port0 [style=dashed]
> 	n00000018:port1 -> n00000001:port0 [style=dashed]
> 	n00000022 [label="{{} | imx219 6-0010\n/dev/v4l-subdev3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
> 	n00000022:port0 -> n00000018:port0 [style=bold]
> }
> 
> [the device topology]:
> 
> Media controller API version 6.4.0
> 
> Media device information
> ------------------------
> driver          starfive-camss
> model           Starfive Camera Subsystem
> serial          
> bus info        platform:19840000.camss
> hw revision     0x0
> driver version  6.4.0
> 
> Device topology
> - entity 1: stf_isp0 (2 pads, 2 links)
>             type V4L2 subdev subtype Unknown flags 0
>             device node name /dev/v4l-subdev0
> 	pad0: Sink
> 		[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:srgb
> 		 crop.bounds:(0,0)/1920x1080
> 		 crop:(0,0)/1920x1080]
> 		<- "cdns_csi2rx.19800000.csi-bridge":1 []
> 	pad1: Source
> 		[fmt:Y12_1X12/1920x1080 field:none colorspace:srgb
> 		 crop.bounds:(0,0)/1920x1080
> 		 crop:(0,0)/1920x1080]
> 		-> "stf_vin0_isp0":0 []
> 
> - entity 4: stf_vin0_wr (2 pads, 2 links)
>             type V4L2 subdev subtype Unknown flags 0
>             device node name /dev/v4l-subdev1
> 	pad0: Sink
> 		[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:srgb]
> 		<- "cdns_csi2rx.19800000.csi-bridge":1 []
> 	pad1: Source
> 		[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:srgb]
> 		-> "stf_vin0_wr_video0":0 [ENABLED,IMMUTABLE]
> 
> - entity 7: stf_vin0_wr_video0 (1 pad, 1 link)
>             type Node subtype V4L flags 0
>             device node name /dev/video0
> 	pad0: Sink
> 		<- "stf_vin0_wr":1 [ENABLED,IMMUTABLE]
> 
> - entity 13: stf_vin0_isp0 (2 pads, 2 links)
>              type V4L2 subdev subtype Unknown flags 0
>              device node name /dev/v4l-subdev2
> 	pad0: Sink
> 		[fmt:Y12_1X12/1920x1080 field:none colorspace:srgb]
> 		<- "stf_isp0":1 []
> 	pad1: Source
> 		[fmt:Y12_1X12/1920x1080 field:none colorspace:srgb]
> 		-> "stf_vin0_isp0_video1":0 [ENABLED,IMMUTABLE]
> 
> - entity 16: stf_vin0_isp0_video1 (1 pad, 1 link)
>              type Node subtype V4L flags 0
>              device node name /dev/video1
> 	pad0: Sink
> 		<- "stf_vin0_isp0":1 [ENABLED,IMMUTABLE]
> 
> - entity 24: cdns_csi2rx.19800000.csi-bridge (5 pads, 3 links)
>              type V4L2 subdev subtype Unknown flags 0
> 	pad0: Sink
> 		<- "imx219 6-0010":0 [ENABLED,IMMUTABLE]
> 	pad1: Source
> 		-> "stf_vin0_wr":0 []
> 		-> "stf_isp0":0 []
> 	pad2: Source
> 	pad3: Source
> 	pad4: Source
> 
> - entity 34: imx219 6-0010 (1 pad, 1 link)
>              type V4L2 subdev subtype Sensor flags 0
>              device node name /dev/v4l-subdev3
> 	pad0: Source
> 		[fmt:SRGGB10_1X10/3280x2464 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range
> 		 crop.bounds:(8,8)/3280x2464
> 		 crop:(8,8)/3280x2464]
> 		-> "cdns_csi2rx.19800000.csi-bridge":0 [ENABLED,IMMUTABLE]
> 
> ===========================================================================
> [the v4l2-compliance output]:
> 
> v4l2-compliance -s -d /dev/video1
> v4l2-compliance 1.24.1, 64 bits, 64-bit time_t
> 
> Compliance test for stf camss device /dev/video1:
> 
> Driver Info:
> 	Driver name      : stf camss
> 	Card type        : Starfive Camera Subsystem
> 	Bus info         : platform:19840000.camss
> 	Driver version   : 6.4.0
> 	Capabilities     : 0x85200001
> 		Video Capture
> 		Read/Write
> 		Streaming
> 		Extended Pix Format
> 		Device Capabilities
> 	Device Caps      : 0x05200001
> 		Video Capture
> 		Read/Write
> 		Streaming
> 		Extended Pix Format
> Media Driver Info:
> 	Driver name      : starfive-camss
> 	Model            : Starfive Camera Subsystem
> 	Serial           : 
> 	Bus info         : platform:19840000.camss
> 	Media version    : 6.4.0
> 	Hardware revision: 0x00000000 (0)
> 	Driver version   : 6.4.0
> Interface Info:
> 	ID               : 0x03000012
> 	Type             : V4L Video
> Entity Info:
> 	ID               : 0x00000010 (16)
> 	Name             : stf_vin0_isp0_video1
> 	Function         : V4L2 I/O
> 	Pad 0x01000011   : 0: Sink
> 	  Link 0x02000014: from remote pad 0x100000f of entity 'stf_vin0_isp0' (Video Pixel Formatter): Data, Enabled, Immutable
> 
> Required ioctls:
> 	test MC information (see 'Media Driver Info' above): OK
> 	test VIDIOC_QUERYCAP: OK
> 	test invalid ioctls: OK
> 
> Allow for multiple opens:
> 	test second /dev/video1 open: OK
> 	test VIDIOC_QUERYCAP: OK
> 	test VIDIOC_G/S_PRIORITY: OK
> 	test for unlimited opens: OK
> 
> Debug ioctls:
> 	test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> 	test VIDIOC_LOG_STATUS: OK (Not Supported)
> 
> Input ioctls:
> 	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> 	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> 	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> 	test VIDIOC_ENUMAUDIO: OK (Not Supported)
> 	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> 	test VIDIOC_G/S_AUDIO: OK (Not Supported)
> 	Inputs: 0 Audio Inputs: 0 Tuners: 0
> 
> Output ioctls:
> 	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> 	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> 	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> 	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> 	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> 	Outputs: 0 Audio Outputs: 0 Modulators: 0
> 
> Input/Output configuration ioctls:
> 	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> 	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> 	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> 	test VIDIOC_G/S_EDID: OK (Not Supported)
> 
> Control ioctls:
> 	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> 	test VIDIOC_QUERYCTRL: OK (Not Supported)
> 	test VIDIOC_G/S_CTRL: OK (Not Supported)
> 	test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> 	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> 	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> 	Standard Controls: 0 Private Controls: 0
> 
> Format ioctls:
> 	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> 	test VIDIOC_G/S_PARM: OK (Not Supported)
> 	test VIDIOC_G_FBUF: OK (Not Supported)
> 	test VIDIOC_G_FMT: OK
> 	test VIDIOC_TRY_FMT: OK
> 	test VIDIOC_S_FMT: OK
> 	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> 	test Cropping: OK (Not Supported)
> 	test Composing: OK (Not Supported)
> 	test Scaling: OK
> 
> Codec ioctls:
> 	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> 	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> 	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> 
> Buffer ioctls:
> 	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> 	test VIDIOC_EXPBUF: OK
> 	test Requests: OK (Not Supported)
> 
> Test input 0:
> 
> Streaming ioctls:
> 	test read/write: OK
> 	test blocking wait: OK
> 	test MMAP (no poll): OK                           
> 	test MMAP (select): OK                            
> 	test MMAP (epoll): OK                             
> 	test USERPTR (no poll): OK (Not Supported)
> 	test USERPTR (select): OK (Not Supported)
> 	test DMABUF: Cannot test, specify --expbuf-device
> 
> Total for stf camss device /dev/video1: 53, Succeeded: 53, Failed: 0, Warnings: 0
> 
> ===========================================================================
> 
> Changes in v7:
> - HAS_DMA is used instead of DMA_CMA in Kconfig.
> - Dropped some non-essential member variables.
> - Used v4l2_async_nf_add_fwnode_remote() to simplify the relevant code.
> - Modified some Local variable types in the function.
> - Used v4l2_create_fwnode_links_to_pad() to simplify the relevant code.
> - Added error handling for clk_prepare_enable().
> - Simplified stfcamss_format_info struct and modified the relevant code.
> - Dropped enum_input, g_input and s_input.
> - Unified v4l2_ioctl_ops struct.
> - Used v4l2_fh_open()/vb2_fop_release to replace deprecated APIs.
> - Added a camss directory under the starfive directory and modified the
>   patch title.
> 
> v6 link: https://lore.kernel.org/all/20230525083202.67933-1-jack.zhu@starfivetech.com/
> 
> Changes in v6:
> - Added 'bus-type' in bindings example.
> - Corrected spelling errors.
> - As reviewed by Bryan, used 'nclks' and 'nrsts' variables.
> - Added lccf config for ISP.
> 
> v5 link: https://lore.kernel.org/all/20230512102844.51084-1-jack.zhu@starfivetech.com/
> 
> Changes in v5:
> - Rebased on v6.4-rc1.
> - Added new patch.
> - Modified ISP driver.
> 
> v4 link: https://lore.kernel.org/all/20230413035541.62129-1-jack.zhu@starfivetech.com/
> 
> Previous cover letter from v4:
> 
> This patch series adds support for the StarFive Camera Subsystem
> found on StarFive JH7110 SoC.
> 
> The driver implements V4L2, Media controller and V4L2 subdev interfaces.
> Camera sensor using V4L2 subdev interface in the kernel is supported.
> 
> The driver is tested on VisionFive V2 board with IMX219 camera sensor.
> GStreamer 1.18.5 with v4l2src plugin is supported.
> 
> Changes since v3:
> Patch 1:
> - Modified port@0 and port@1 properties.
> - Extended the port@0 example with appropriate properties.
> - Added 'port@0' for 'required'
> Patch 2:
> - Modified spelling errors.
> Patch 3:
> - Merged patch 5 into the patch with an explanation for compatible in
>   commit msg.
> Patch 6:
> - Asserted pixel_rst[i] reset in the loop after the err_disable_pixclk
>   label.
> - Modified Code Style for getting sys_rst and p_rst.
> - Renamed clk_name to name and modified the relevant code.
> Patch 9:
> - Added static for stfcamss_get_mem_res function.
> - Added static for isp_close function.
> - Fixed implicit conversion warning for stf_vin_map_isp_pad function.
> - Dropped unused variables.
> 
>   v3: https://lore.kernel.org/all/20230331121826.96973-1-jack.zhu@starfivetech.com/
> 
> Changes since v2:
> - Rebased on v6.3-rc1.
> Patch 1:
> - Modified spelling errors.
> - Added port@0.
> - Modified '$ref' of port.
> - Added 'ports' to 'required'.
> - Dropped 'stfcamss' label in example.
> - Added port@0 in example.
> - Added MAINTAINERS file.
> Patch 2:
> - Split this patch into three new patches.
> - Modified compatible property.
> - Replaced clock names with the existing names.
> - Modified 'bus-type' and 'clock-lanes'
> - Added port@2 - port@4
> - Dropped 'csi2rx' label in example.
> Patch 3:
> - Updated rst and dot file as three pipelines were deleted.
> Patch 4:
> - Split this patch into three new patches.
> - Dropped .s_power() and .get_fmt().
> - Dropped CSI-2 DT support.
> - Dropped v4l2_device_register_subdev_nodes().
> - Used assigned-clock-rates in DT to set clk value.
> - Modified 'compatible' field.
> Patch 5:
> - Deleted three pipelines. 
> - Modified 'stfcamss_clocks'/'stfcamss_resets' struct.
> - Dropped stfcamss_find_sensor() function.
> - Removed redundant code from stfcamss_of_parse_endpoint_node().
> - Modified spelling errors.
> - Rewrote stfcamss_reg_media_subdev_node() function.
> - Modified stfcamss_subdev_notifier_bound().
> - Modified stfcamss_probe() function.
> - Dropped stfcamss_suspend() and stfcamss_resume().
> - Dropped dev_info() in stfcamss_remove() function.
> - Added 'stf_' prefix for enum subdev_type.
> - Moved all includes to the top in stf_camss.h file.
> - Dropped unused fields in stfcamss struct.
> - Replaced Custom logging macros with regular macros.
> - Rewrote register read and write functions.
> - Used lowercase for all hex constants.
> - Used macro to name registers.
> - Dropped unused ioctl and stf_isp_ioctl.h file.
> 
>   v2: https://lore.kernel.org/all/20230310120553.60586-1-jack.zhu@starfivetech.com/
> 
> Changes since v1:
> - Deleted starfive,jh7110-mipi-csi2.yaml.
> - Converted cdns,csi2rx.txt to cdns,csi2rx.yaml and added ‘resets’
>   properties.
> - Added ‘cdns,csi2rx.yaml’ in ‘CADENCE MIPI-CSI2 BRIDGES’ entry.
> - The following contents were modified in starfive,jh7110-camss.yaml:
>   dropped quotes from ’id’ and ‘schema’; dropped ‘|’ for ‘description’;
>   corrected the wrong or redundant words: ‘a ISP’, ‘PD ISP’;
>   dropped ‘minItems’ for ‘reg’, ‘clocks’, ‘resets’ and ‘interrupts’;
>   dropped the '_clk' and 'rst_' prefix about the 'clock-names' and
>   'reset-names';
>   changed ‘endpoint@1’ to ‘endpoint’; updated examples;
> - Updated Subject for some patches.
> - Merged patch 6, 7, 8, 9, 10, 11 into one patch.
> 
> Jack Zhu (6):
>   media: dt-bindings: Add JH7110 Camera Subsystem
>   media: admin-guide: Add starfive_camss.rst for Starfive Camera
>     Subsystem
>   media: starfive: camss: Add basic driver
>   media: starfive: camss: Add video driver
>   media: starfive: camss: Add ISP driver
>   media: starfive: camss: Add VIN driver
> 
>  .../admin-guide/media/starfive_camss.rst      |   57 +
>  .../media/starfive_camss_graph.dot            |   16 +
>  .../admin-guide/media/v4l-drivers.rst         |    1 +
>  .../bindings/media/starfive,jh7110-camss.yaml |  180 +++
>  MAINTAINERS                                   |    9 +
>  drivers/media/platform/Kconfig                |    1 +
>  drivers/media/platform/Makefile               |    1 +
>  drivers/media/platform/starfive/Kconfig       |    5 +
>  drivers/media/platform/starfive/Makefile      |    2 +
>  drivers/media/platform/starfive/camss/Kconfig |   16 +
>  .../media/platform/starfive/camss/Makefile    |   14 +
>  .../media/platform/starfive/camss/stf_camss.c |  444 +++++++
>  .../media/platform/starfive/camss/stf_camss.h |  151 +++
>  .../media/platform/starfive/camss/stf_isp.c   |  519 ++++++++
>  .../media/platform/starfive/camss/stf_isp.h   |  479 ++++++++
>  .../platform/starfive/camss/stf_isp_hw_ops.c  |  468 ++++++++
>  .../media/platform/starfive/camss/stf_video.c |  724 +++++++++++
>  .../media/platform/starfive/camss/stf_video.h |   92 ++
>  .../media/platform/starfive/camss/stf_vin.c   | 1069 +++++++++++++++++
>  .../media/platform/starfive/camss/stf_vin.h   |  173 +++
>  .../platform/starfive/camss/stf_vin_hw_ops.c  |  192 +++
>  21 files changed, 4613 insertions(+)
>  create mode 100644 Documentation/admin-guide/media/starfive_camss.rst
>  create mode 100644 Documentation/admin-guide/media/starfive_camss_graph.dot
>  create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
>  create mode 100644 drivers/media/platform/starfive/Kconfig
>  create mode 100644 drivers/media/platform/starfive/Makefile
>  create mode 100644 drivers/media/platform/starfive/camss/Kconfig
>  create mode 100644 drivers/media/platform/starfive/camss/Makefile
>  create mode 100644 drivers/media/platform/starfive/camss/stf_camss.c
>  create mode 100644 drivers/media/platform/starfive/camss/stf_camss.h
>  create mode 100644 drivers/media/platform/starfive/camss/stf_isp.c
>  create mode 100644 drivers/media/platform/starfive/camss/stf_isp.h
>  create mode 100644 drivers/media/platform/starfive/camss/stf_isp_hw_ops.c
>  create mode 100644 drivers/media/platform/starfive/camss/stf_video.c
>  create mode 100644 drivers/media/platform/starfive/camss/stf_video.h
>  create mode 100644 drivers/media/platform/starfive/camss/stf_vin.c
>  create mode 100644 drivers/media/platform/starfive/camss/stf_vin.h
>  create mode 100644 drivers/media/platform/starfive/camss/stf_vin_hw_ops.c
>