[v4,0/5] Add support for DCMIPP camera interface of STMicroelectronics STM32 SoC series

Message

Alain Volmat Sept. 27, 2023, 12:38 p.m. UTC

This patchset introduces support for Digital Camera Memory Interface
Pixel Processor (DCMIPP) of STMicroelectronics STM32 SoC series.

This initial support implements a single capture pipe
allowing RGB565, YUV, Y, RAW8 and JPEG capture with
frame skipping, prescaling and cropping.

DCMIPP is exposed through 3 subdevices:
- dcmipp_dump_parallel: parallel interface handling
- dcmipp_dump_postproc: frame skipping, prescaling and cropping control
- dcmipp_dump_capture: video device capture node

v4:
  - rework of mutex / spinlock handling
  - addition of dma mask setting
  - removal of __maybe_unused, use pm_ptr and new declaration macros
  - driver now only generate a single stm32-dcmipp.ko module instead of
    several as before
  - removal of the component framework usage
  - various small fixes (function names, lowercase values, indentation,
    print formats)
  - register name removal in register access function, only dev_dbg with
    address & values are kept
  - removal of VB2_READ and CAP_READWRITE
  - usage of subdev active state mechanism and removal of locally stored
    format/compose/crop
  - addition of port { } within the stm32mp135.dtsi

v3:
  - Have same To & Cc in all patches emails of the serie so that everybody
    has coherent view of the serie
  - bindings: correct wording, clock-names & label removal
  - driver: replace of_graph call with fwnode_graph
  - driver: use defined bus-type when calling v4l2_fwnode_endpoint_parse
  - driver: remove clock name
  - dtsi: remove clock-names property

v2:
  - removal of pclk-max-frequency from yaml example dts
  - codying-style fixes
  - correction in enum functions (format, mbus, frame_size ...) handling
  - drop of v4l2_pipeline_pm_ calls, and specific open/close handler of
    vdev
  - video dev s_stream handling updated to call s_stream of remote subdev
    instead of loop until sensor subdev
  - code update following media_pipeline & v4l2_async_ api changes since v1
  - removal of IP reset call upon error
  - removal of link_validate handlers
  - addition of V4L2_CAP_IO_MC device_caps
  - removal of the frame skip control for the time being, will be added
    back in another commit once control method will be agreed
  - change byteproc entity type to MEDIA_ENT_F_PROC_VIDEO_SCALER
  - various fixes from Dan & Sakari remarks

Alain Volmat (2):
  dt-bindings: media: add bindings for stm32 dcmipp
  media: MAINTAINERS: add entry for STM32 DCMIPP driver

Hugues Fruchet (3):
  media: stm32-dcmipp: STM32 DCMIPP camera interface driver
  ARM: dts: stm32: add dcmipp support to stm32mp135
  ARM: multi_v7_defconfig: enable STM32 DCMIPP media support

 .../bindings/media/st,stm32-dcmipp.yaml       |  89 ++
 MAINTAINERS                                   |   5 +-
 arch/arm/boot/dts/st/stm32mp135.dtsi          |  11 +
 arch/arm/configs/multi_v7_defconfig           |   1 +
 drivers/media/platform/st/stm32/Kconfig       |  15 +
 drivers/media/platform/st/stm32/Makefile      |   1 +
 .../platform/st/stm32/stm32-dcmipp/Makefile   |   4 +
 .../st/stm32/stm32-dcmipp/dcmipp-bytecap.c    | 993 ++++++++++++++++++
 .../st/stm32/stm32-dcmipp/dcmipp-byteproc.c   | 591 +++++++++++
 .../st/stm32/stm32-dcmipp/dcmipp-common.c     | 106 ++
 .../st/stm32/stm32-dcmipp/dcmipp-common.h     | 207 ++++
 .../st/stm32/stm32-dcmipp/dcmipp-core.c       | 603 +++++++++++
 .../st/stm32/stm32-dcmipp/dcmipp-parallel.c   | 461 ++++++++
 13 files changed, 3086 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
 create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/Makefile
 create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-bytecap.c
 create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-byteproc.c
 create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.c
 create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.h
 create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-core.c
 create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-parallel.c