mbox series

[net-next,v2,00/10] net: Convert using devm_clk_get_enabled()/devm_clk_get_optional_enabled()

Message ID 20240907031009.3591057-1-lizetao1@huawei.com (mailing list archive)
Headers show
Series net: Convert using devm_clk_get_enabled()/devm_clk_get_optional_enabled() | expand

Message

Li Zetao Sept. 7, 2024, 3:09 a.m. UTC
v1 -> v2:
  1) Patch 5 optimizes the check and adds commit information for easier
  inspection.
  2) It is no longer necessary to use clk, so delete the clk member of
  the spl2sw_common structure.
  3) Remove patches 11 and 12, they should be sent to wireless-next
  individually

v1:
https://lore.kernel.org/all/20240831021334.1907921-1-lizetao1@huawei.com/

There are many examples[1][2] of clk resource leakage in LTS. The
reason is that developers need to maintain the allocation and release
of clk resources themselves, but this will increase the burden on
developers. Using the API related to devm_clk_get_*_enable ensures
that the life cycle of clk is consistent with that of the device,
reducing the risk of unreleased resources like clk.

Several other developers are also working on converting to more
secure interfaces, and this patch set is in principle the same as
theirs.

[1]:
https://lore.kernel.org/all/20240812160128.338041191@linuxfoundation.org/
[2]:
https://lore.kernel.org/all/20240812160135.992451065@linuxfoundation.org/

Li Zetao (10):
  net: dsa: bcm_sf2: Convert using devm_clk_get_optional_enabled() in
    bcm_sf2_sw_probe()
  net: ethernet: Convert using devm_clk_get_enabled() in emac_probe()
  net: ethernet: arc: Convert using devm_clk_get_enabled() in
    emac_probe()
  net: ethernet: ethoc: Convert using devm_clk_get_enabled() in
    ethoc_probe()
  net: ftgmac100: Convert using devm_clk_get_enabled() in
    ftgmac100_setup_clk()
  net: ethernet: hisilicon: Convert using devm_clk_get_enabled() in
    hisi_femac_drv_probe()
  net: lantiq_xrx200: Convert using devm_clk_get_enabled() in
    xrx200_probe()
  net: stmmac: dwmac-dwc-qos-eth: Convert using devm_clk_get_enabled()
    in dwc_qos_probe()
  net: ethernet: sunplus: Convert using devm_clk_get_enabled() in
    spl2sw_probe()
  net: xilinx: axienet: Convert using devm_clk_get_optional_enabled() in
    axienet_probe()

 drivers/net/dsa/bcm_sf2.c                     | 28 ++----
 drivers/net/ethernet/allwinner/sun4i-emac.c   | 13 +--
 drivers/net/ethernet/arc/emac_rockchip.c      | 34 ++-----
 drivers/net/ethernet/ethoc.c                  | 18 ++--
 drivers/net/ethernet/faraday/ftgmac100.c      | 26 +----
 drivers/net/ethernet/hisilicon/hisi_femac.c   | 17 +---
 drivers/net/ethernet/lantiq_xrx200.c          | 17 +---
 .../stmicro/stmmac/dwmac-dwc-qos-eth.c        | 98 ++++---------------
 drivers/net/ethernet/sunplus/spl2sw_define.h  |  1 -
 drivers/net/ethernet/sunplus/spl2sw_driver.c  | 25 ++---
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 15 +--
 11 files changed, 62 insertions(+), 230 deletions(-)

Comments

Li Zetao Sept. 7, 2024, 3:03 a.m. UTC | #1
Sorry to bother you, I made a small mistake when I sent the patch. 
Please ignore the patchset.

在 2024/9/7 11:09, Li Zetao 写道:
> v1 -> v2:
>    1) Patch 5 optimizes the check and adds commit information for easier
>    inspection.
>    2) It is no longer necessary to use clk, so delete the clk member of
>    the spl2sw_common structure.
>    3) Remove patches 11 and 12, they should be sent to wireless-next
>    individually
> 
> v1:
> https://lore.kernel.org/all/20240831021334.1907921-1-lizetao1@huawei.com/
> 
> There are many examples[1][2] of clk resource leakage in LTS. The
> reason is that developers need to maintain the allocation and release
> of clk resources themselves, but this will increase the burden on
> developers. Using the API related to devm_clk_get_*_enable ensures
> that the life cycle of clk is consistent with that of the device,
> reducing the risk of unreleased resources like clk.
> 
> Several other developers are also working on converting to more
> secure interfaces, and this patch set is in principle the same as
> theirs.
> 
> [1]:
> https://lore.kernel.org/all/20240812160128.338041191@linuxfoundation.org/
> [2]:
> https://lore.kernel.org/all/20240812160135.992451065@linuxfoundation.org/
> 
> Li Zetao (10):
>    net: dsa: bcm_sf2: Convert using devm_clk_get_optional_enabled() in
>      bcm_sf2_sw_probe()
>    net: ethernet: Convert using devm_clk_get_enabled() in emac_probe()
>    net: ethernet: arc: Convert using devm_clk_get_enabled() in
>      emac_probe()
>    net: ethernet: ethoc: Convert using devm_clk_get_enabled() in
>      ethoc_probe()
>    net: ftgmac100: Convert using devm_clk_get_enabled() in
>      ftgmac100_setup_clk()
>    net: ethernet: hisilicon: Convert using devm_clk_get_enabled() in
>      hisi_femac_drv_probe()
>    net: lantiq_xrx200: Convert using devm_clk_get_enabled() in
>      xrx200_probe()
>    net: stmmac: dwmac-dwc-qos-eth: Convert using devm_clk_get_enabled()
>      in dwc_qos_probe()
>    net: ethernet: sunplus: Convert using devm_clk_get_enabled() in
>      spl2sw_probe()
>    net: xilinx: axienet: Convert using devm_clk_get_optional_enabled() in
>      axienet_probe()
> 
>   drivers/net/dsa/bcm_sf2.c                     | 28 ++----
>   drivers/net/ethernet/allwinner/sun4i-emac.c   | 13 +--
>   drivers/net/ethernet/arc/emac_rockchip.c      | 34 ++-----
>   drivers/net/ethernet/ethoc.c                  | 18 ++--
>   drivers/net/ethernet/faraday/ftgmac100.c      | 26 +----
>   drivers/net/ethernet/hisilicon/hisi_femac.c   | 17 +---
>   drivers/net/ethernet/lantiq_xrx200.c          | 17 +---
>   .../stmicro/stmmac/dwmac-dwc-qos-eth.c        | 98 ++++---------------
>   drivers/net/ethernet/sunplus/spl2sw_define.h  |  1 -
>   drivers/net/ethernet/sunplus/spl2sw_driver.c  | 25 ++---
>   .../net/ethernet/xilinx/xilinx_axienet_main.c | 15 +--
>   11 files changed, 62 insertions(+), 230 deletions(-)
>