[v9,00/16] media: qcom: camss: Add sm8550 support

Message

Depeng Shao Jan. 13, 2025, 4:31 a.m. UTC

v9:
- Add RB for the dt-binding change - Krzysztof
- Rebase the patch [9/16] due to conflict - Bryan
- Link to v8: https://lore.kernel.org/all/[e-mail]/

v8:
- Add correct version number for each patch - Krzysztof, Hans, Bryan
- Correct the copyright in patches [15/16] and [16/16]
- Link to v7: https://lore.kernel.org/all/[e-mail]/

v7:
- Due to the patches in https://lore.kernel.org/all/[e-mail]/
  are merged, so rebased below patches to fix the conflict.
  media: qcom: camss: csiphy-3ph: Remove redundant PHY init sequence control loop
  media: qcom: camss: csiphy-3ph: Move CSIPHY variables to data field inside csiphy struct
  media: qcom: camss: Add sm8550 compatible
  media: qcom: camss: csiphy-3ph: Move CSIPHY variables to data field inside csiphy struct
  media: qcom: camss: csiphy-3ph: Add Gen2 v2.1.2 two-phase MIPI CSI-2 DPHY support
  media: qcom: camss: Add support for VFE 780
- Add RB for "media: qcom: camss: Add CSID 780 support" - Bryan
- Use TAG name for ICC and remove offline HW ICC - Bryan
- Remove the logic that moving enable_irq();/disable_irq(); to wm_start() 
  and wm_stop() to make sure no logical change in VFE refactor change.
- Update the commit message and title for the TPG change. - Bryan
- Link to v6: https://lore.kernel.org/all/[e-mail]/

v6:
- Add bus type property in dt-binding which will be limited
  by a latest change 
  https://lore.kernel.org/all/[e-mail]/
- Add RB for "media: qcom: camss: Add sm8550 compatible" and
  "media: qcom: camss: Add support for VFE 780"
- Uppercase the hex in csiphy register list - Bryan
- Add empty function for csid tpg - Vladimir
- Set testgen mode to CSID_PAYLOAD_MODE_DISABLED in subdev init interface
- encapsulate the guard __thus__ for new header - Bryan
- Add a standalone patch for the platform which doesn't support CSID TPG
  to make sure new platform driver can set CSID_PAYLOAD_MODE_DISABLED
  to disable TPG
- Update the csid for csid and vfe driver - Bryan
- Link to v5: https://lore.kernel.org/all/[e-mail]/

v5:
- Update dt-bindings required items order - Krzysztof
- Sort the reg order based on the comments in sc7280 dt-binding - Vladimir
- Change the irq type to IRQ_TYPE_EDGE_RISING - Vladimir
- Remove the Krzysztof's RB tag from dt-binding patch due to above
  updates in dt-binding patch
- Move regulator from csid resource to csiphy resource - Bryan, Vladimir
- Move the change to add default case in vfe_src_pad_code to a
  standalone patch. - Bryan
- Rename csid-gen3 as csid-780 - Bryan
- use macros() to bury bit shifts - Bryan
- Sort the macros by register offset order  -  Vladimir
- Redefine a macro for rup_aup in csid driver - Vladimir
- Remove the unused macros in vfe 780 driver - Vladimir
- Add dummy function for unsupported hw_ops in vfe 780
  driver - Vladimir, Bryan
- Use a standalone patch for the callback API of RUP and buf done update
- Use a standalone patch to make CSID TPG optional - Vladimir
- Link to v4: https://lore.kernel.org/all/[e-mail]/

v4:
- Update dt-bindings based on comments - Krzysztof, bod, Vladimir
- Move common code into csid core and vfe core driver - bod
- Remove *_relaxed in the csid and vfe drivers - Krzysztof
- Reorganize patches in logical junks, make sure that new added
structures have users in current patch - Krzysztof
- Remove notify function  and add new functions in camss for buf done
and reg update - bod
- Remove custom code to get csid base - bod
- Remove ISR function in vfe780 driver since it is never fired - bod
- Move csid_top_base to camss structure since we only have one csid
top block, and just need to get base once for csid top
- Add Vladimir's RB
- Remove prerequisite-patch-id in the cover letter since the changes
have been merged
- Add dtsi patch link for reference - Krzysztof
https://lore.kernel.org/all/[e-mail]/
- Link to v3: https://lore.kernel.org/all/[e-mail]/

v3:
- Rebased the change based on below change which will be merged firstly.
"Move camss version related defs in to resources"
Link: https://lore.kernel.org/all/[e-mail]/
- Rebased the change based on Bryan's csiphy optimization change and add
these changes into this series, so that the new csiphy-3ph driver don't
need to add duplicate code. This has got Bryan's permission to add his
patches into this series.
- Refactor some changes based on the comments to move the random code to
patches where they are used.
- Remove the vfe780 irq function since it isn't doing the actual work.
- Add dt-binding for sm8550 camss driver.
Link to V2: https://lore.kernel.org/all/[e-mail]/

v2:
- Update some commit messages
Link to V1: https://lore.kernel.org/all/[e-mail]/

v1:
SM8550 is a Qualcomm flagship SoC. This series adds support to
bring up the CSIPHY, CSID, VFE/RDI interfaces in SM8550.

SM8550 provides

- 3 x VFE, 3 RDI per VFE
- 2 x VFE Lite, 4 RDI per VFE
- 3 x CSID
- 2 x CSID Lite
- 8 x CSI PHY

Bryan O'Donoghue (6):
  media: qcom: camss: csiphy-3ph: Fix trivial indentation fault in
    defines
  media: qcom: camss: csiphy-3ph: Remove redundant PHY init sequence
    control loop
  media: qcom: camss: csiphy-3ph: Rename struct
  media: qcom: camss: csiphy: Add an init callback to CSI PHY devices
  media: qcom: camss: csiphy-3ph: Move CSIPHY variables to data field
    inside csiphy struct
  media: qcom: camss: csiphy-3ph: Use an offset variable to find common
    control regs

Depeng Shao (10):
  media: qcom: camss: csid: Move common code into csid core
  media: qcom: camss: vfe: Move common code into vfe core
  media: qcom: camss: Add callback API for RUP update and buf done
  media: qcom: camss: Add default case in vfe_src_pad_code
  media: qcom: camss: csid: Only add TPG v4l2 ctrl if TPG hardware is
    available
  dt-bindings: media: camss: Add qcom,sm8550-camss binding
  media: qcom: camss: Add sm8550 compatible
  media: qcom: camss: csiphy-3ph: Add Gen2 v2.1.2 two-phase MIPI CSI-2
    DPHY support
  media: qcom: camss: Add CSID 780 support
  media: qcom: camss: Add support for VFE 780

 .../bindings/media/qcom,sm8550-camss.yaml     | 597 +++++++++++++
 drivers/media/platform/qcom/camss/Makefile    |   2 +
 .../platform/qcom/camss/camss-csid-4-1.c      |  19 -
 .../platform/qcom/camss/camss-csid-4-7.c      |  42 -
 .../platform/qcom/camss/camss-csid-780.c      | 337 ++++++++
 .../platform/qcom/camss/camss-csid-780.h      |  25 +
 .../platform/qcom/camss/camss-csid-gen2.c     |  60 --
 .../media/platform/qcom/camss/camss-csid.c    | 137 ++-
 .../media/platform/qcom/camss/camss-csid.h    |  31 +
 .../qcom/camss/camss-csiphy-2ph-1-0.c         |   6 +
 .../qcom/camss/camss-csiphy-3ph-1-0.c         | 794 ++++++++++--------
 .../media/platform/qcom/camss/camss-csiphy.c  |   4 +
 .../media/platform/qcom/camss/camss-csiphy.h  |   8 +
 .../media/platform/qcom/camss/camss-vfe-17x.c | 112 +--
 .../media/platform/qcom/camss/camss-vfe-4-1.c |   9 -
 .../media/platform/qcom/camss/camss-vfe-4-7.c |  11 -
 .../media/platform/qcom/camss/camss-vfe-4-8.c |  11 -
 .../media/platform/qcom/camss/camss-vfe-480.c | 274 +-----
 .../media/platform/qcom/camss/camss-vfe-780.c | 159 ++++
 drivers/media/platform/qcom/camss/camss-vfe.c | 274 ++++++
 drivers/media/platform/qcom/camss/camss-vfe.h |  59 +-
 drivers/media/platform/qcom/camss/camss.c     | 359 ++++++++
 drivers/media/platform/qcom/camss/camss.h     |   4 +
 23 files changed, 2464 insertions(+), 870 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml
 create mode 100644 drivers/media/platform/qcom/camss/camss-csid-780.c
 create mode 100644 drivers/media/platform/qcom/camss/camss-csid-780.h
 create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-780.c


base-commit: 2b88851f583d3c4e40bcd40cfe1965241ec229dd