| Message ID | 005301ce761b$32adf960$9809ec20$@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 07/01/2013 07:24 AM, Jingoo Han wrote: > Add a PHY provider driver for the Samsung Exynos SoC DP PHY. > > Signed-off-by: Jingoo Han<jg1.han@samsung.com> > Cc: Sylwester Nawrocki<s.nawrocki@samsung.com> > Acked-by: Felipe Balbi<balbi@ti.com> > --- > .../devicetree/bindings/phy/samsung-phy.txt | 8 ++ > drivers/phy/Kconfig | 5 + > drivers/phy/Makefile | 1 + > drivers/phy/phy-exynos-dp-video.c | 118 ++++++++++++++++++++ > 4 files changed, 132 insertions(+) > create mode 100644 drivers/phy/phy-exynos-dp-video.c > > diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt > index 5ff208c..3fb656a 100644 > --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt > +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt > @@ -12,3 +12,11 @@ the PHY specifier identifies the PHY and its meaning is as follows: > 1 - MIPI DSIM 0, > 2 - MIPI CSIS 1, > 3 - MIPI DSIM 1. > + > +Samsung EXYNOS SoC series DP PHY I would make it "Samsung EXYNOS SoC series Display Port PHY" > +------------------------------------------------- > + > +Required properties: > +- compatible : should be "samsung,exynos5250-dp-video-phy"; > +- reg : offset and length of the DP PHY register set; > +- #phy-cells : from the generic phy bindings, must be 0; s/phy/PHY ? > \ No newline at end of file Missing new line character. > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 6f446d0..760f55a 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -19,4 +19,9 @@ config PHY_EXYNOS_MIPI_VIDEO > help > Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung > S5P and EXYNOS SoCs. > + > +config PHY_EXYNOS_DP_VIDEO > + tristate "EXYNOS SoC series DP PHY driver" "EXYNOS SoC series Display Port PHY driver" ? > + help > + Support for DP PHY found on Samsung EXYNOS SoCs. s/DP/Display Port ? > endif > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index 71d8841..0fd1340 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -4,3 +4,4 @@ > > obj-$(CONFIG_GENERIC_PHY) += phy-core.o > obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o > +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o > diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c > new file mode 100644 > index 0000000..75e1d11 > --- /dev/null > +++ b/drivers/phy/phy-exynos-dp-video.c > @@ -0,0 +1,118 @@ > +/* > + * Samsung EXYNOS SoC series DP PHY driver s/DP/Display Port ? > + * > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > + * Author: Jingoo Han<jg1.han@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include<linux/io.h> > +#include<linux/kernel.h> > +#include<linux/module.h> > +#include<linux/of.h> > +#include<linux/of_address.h> > +#include<linux/phy/phy.h> > +#include<linux/platform_device.h> > + > +/* DPTX_PHY_CONTROL register */ > +#define EXYNOS_DPTX_PHY_ENABLE (1<< 0) > + > +struct exynos_dp_video_phy { > + void __iomem *regs; > +}; > + > +static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on) > +{ > + void __iomem *addr; How about just dropping this local variable ? > + u32 reg; > + > + addr = state->regs; > + > + reg = readl(addr); > + if (on) > + reg |= EXYNOS_DPTX_PHY_ENABLE; > + else > + reg&= ~EXYNOS_DPTX_PHY_ENABLE; > + writel(reg, addr); > + > + return 0; > +} > + > +static int exynos_dp_video_phy_power_on(struct phy *phy) > +{ > + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); > + > + return __set_phy_state(state, 1); > +} > + > +static int exynos_dp_video_phy_power_off(struct phy *phy) > +{ > + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); > + > + return __set_phy_state(state, 0); > +} > + > +static struct phy_ops exynos_dp_video_phy_ops = { > + .power_on = exynos_dp_video_phy_power_on, > + .power_off = exynos_dp_video_phy_power_off, > + .owner = THIS_MODULE, > +}; > + > +static int exynos_dp_video_phy_probe(struct platform_device *pdev) > +{ > + struct exynos_dp_video_phy *state; > + struct device *dev =&pdev->dev; > + struct resource *res; > + struct phy_provider *phy_provider; > + struct phy *phy; > + > + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); > + if (!state) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + > + state->regs = devm_ioremap_resource(dev, res); > + if (IS_ERR(state->regs)) > + return PTR_ERR(state->regs); > + > + dev_set_drvdata(dev, state); I can't see any corresponding dev_get_drvdata(), it should be safe to remove this assignment. > + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > + if (IS_ERR(phy_provider)) > + return PTR_ERR(phy_provider); > + > + phy = devm_phy_create(dev, 0,&exynos_dp_video_phy_ops, "dp"); The label could be NULL, since there is no need to support non-dt config. > + if (IS_ERR(phy)) { > + dev_err(dev, "failed to create DP PHY\n"); > + return PTR_ERR(phy); > + } > + phy_set_drvdata(phy, state); > + > + return 0; > +} > + > +#ifdef CONFIG_OF You don't use of_match_ptr() macro to assign of_match_table to the driver structure below. This means build with CONFIG_OF disabled is broken now. I would just remove that #ifdef and would make the driver depends on CONFIG_OF. > +static const struct of_device_id exynos_dp_video_phy_of_match[] = { > + { .compatible = "samsung,exynos5250-dp-video-phy" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); > +#endif > + > +static struct platform_driver exynos_dp_video_phy_driver = { > + .probe = exynos_dp_video_phy_probe, > + .driver = { > + .name = "exynos-dp-video-phy", > + .owner = THIS_MODULE, > + .of_match_table = exynos_dp_video_phy_of_match, > + } > +}; > +module_platform_driver(exynos_dp_video_phy_driver); > + > +MODULE_AUTHOR("Jingoo Han<jg1.han@samsung.com>"); > +MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver"); > +MODULE_LICENSE("GPL v2"); Thanks, Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tuesday, July 02, 2013 4:48 AM, Sylwester Nawrocki wrote: > On 07/01/2013 07:24 AM, Jingoo Han wrote: > > Add a PHY provider driver for the Samsung Exynos SoC DP PHY. > > > > Signed-off-by: Jingoo Han<jg1.han@samsung.com> > > Cc: Sylwester Nawrocki<s.nawrocki@samsung.com> > > Acked-by: Felipe Balbi<balbi@ti.com> > > --- > > .../devicetree/bindings/phy/samsung-phy.txt | 8 ++ > > drivers/phy/Kconfig | 5 + > > drivers/phy/Makefile | 1 + > > drivers/phy/phy-exynos-dp-video.c | 118 ++++++++++++++++++++ > > 4 files changed, 132 insertions(+) > > create mode 100644 drivers/phy/phy-exynos-dp-video.c > > > > diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt > b/Documentation/devicetree/bindings/phy/samsung-phy.txt > > index 5ff208c..3fb656a 100644 > > --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt > > +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt > > @@ -12,3 +12,11 @@ the PHY specifier identifies the PHY and its meaning is as follows: > > 1 - MIPI DSIM 0, > > 2 - MIPI CSIS 1, > > 3 - MIPI DSIM 1. > > + > > +Samsung EXYNOS SoC series DP PHY > > I would make it "Samsung EXYNOS SoC series Display Port PHY" OK. > > > +------------------------------------------------- > > + > > +Required properties: > > +- compatible : should be "samsung,exynos5250-dp-video-phy"; > > +- reg : offset and length of the DP PHY register set; > > +- #phy-cells : from the generic phy bindings, must be 0; > > s/phy/PHY ? OK. > > > \ No newline at end of file > > Missing new line character. OK. > > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > > index 6f446d0..760f55a 100644 > > --- a/drivers/phy/Kconfig > > +++ b/drivers/phy/Kconfig > > @@ -19,4 +19,9 @@ config PHY_EXYNOS_MIPI_VIDEO > > help > > Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung > > S5P and EXYNOS SoCs. > > + > > +config PHY_EXYNOS_DP_VIDEO > > + tristate "EXYNOS SoC series DP PHY driver" > > "EXYNOS SoC series Display Port PHY driver" ? > > > + help > > + Support for DP PHY found on Samsung EXYNOS SoCs. > > s/DP/Display Port ? OK. > > > endif > > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > > index 71d8841..0fd1340 100644 > > --- a/drivers/phy/Makefile > > +++ b/drivers/phy/Makefile > > @@ -4,3 +4,4 @@ > > > > obj-$(CONFIG_GENERIC_PHY) += phy-core.o > > obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o > > +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o > > diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c > > new file mode 100644 > > index 0000000..75e1d11 > > --- /dev/null > > +++ b/drivers/phy/phy-exynos-dp-video.c > > @@ -0,0 +1,118 @@ > > +/* > > + * Samsung EXYNOS SoC series DP PHY driver > > s/DP/Display Port ? OK. > > > + * > > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > > + * Author: Jingoo Han<jg1.han@samsung.com> > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#include<linux/io.h> > > +#include<linux/kernel.h> > > +#include<linux/module.h> > > +#include<linux/of.h> > > +#include<linux/of_address.h> > > +#include<linux/phy/phy.h> > > +#include<linux/platform_device.h> > > + > > +/* DPTX_PHY_CONTROL register */ > > +#define EXYNOS_DPTX_PHY_ENABLE (1<< 0) > > + > > +struct exynos_dp_video_phy { > > + void __iomem *regs; > > +}; > > + > > +static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on) > > +{ > > + void __iomem *addr; > > How about just dropping this local variable ? OK. I will drop this local variable. > > > + u32 reg; > > + > > + addr = state->regs; > > + > > + reg = readl(addr); > > + if (on) > > + reg |= EXYNOS_DPTX_PHY_ENABLE; > > + else > > + reg&= ~EXYNOS_DPTX_PHY_ENABLE; > > + writel(reg, addr); > > + > > + return 0; > > +} > > + > > +static int exynos_dp_video_phy_power_on(struct phy *phy) > > +{ > > + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); > > + > > + return __set_phy_state(state, 1); > > +} > > + > > +static int exynos_dp_video_phy_power_off(struct phy *phy) > > +{ > > + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); > > + > > + return __set_phy_state(state, 0); > > +} > > + > > +static struct phy_ops exynos_dp_video_phy_ops = { > > + .power_on = exynos_dp_video_phy_power_on, > > + .power_off = exynos_dp_video_phy_power_off, > > + .owner = THIS_MODULE, > > +}; > > + > > +static int exynos_dp_video_phy_probe(struct platform_device *pdev) > > +{ > > + struct exynos_dp_video_phy *state; > > + struct device *dev =&pdev->dev; > > + struct resource *res; > > + struct phy_provider *phy_provider; > > + struct phy *phy; > > + > > + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); > > + if (!state) > > + return -ENOMEM; > > + > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + > > + state->regs = devm_ioremap_resource(dev, res); > > + if (IS_ERR(state->regs)) > > + return PTR_ERR(state->regs); > > + > > + dev_set_drvdata(dev, state); > > I can't see any corresponding dev_get_drvdata(), it should be safe > to remove this assignment. OK. I will remove 'dev_set_drvdata(dev, state)'. > > > + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > > + if (IS_ERR(phy_provider)) > > + return PTR_ERR(phy_provider); > > + > > + phy = devm_phy_create(dev, 0,&exynos_dp_video_phy_ops, "dp"); > > The label could be NULL, since there is no need to support non-dt config. OK. I will replace "dp" with NULL. > > > + if (IS_ERR(phy)) { > > + dev_err(dev, "failed to create DP PHY\n"); > > + return PTR_ERR(phy); > > + } > > + phy_set_drvdata(phy, state); > > + > > + return 0; > > +} > > + > > +#ifdef CONFIG_OF > > You don't use of_match_ptr() macro to assign of_match_table to the driver > structure below. This means build with CONFIG_OF disabled is broken now. > I would just remove that #ifdef and would make the driver depends on > CONFIG_OF. OK. I will add 'depends on OF', then remove '#ifdef CONFIG_OF'. Thank you for your detailed comment. :) Best regards, Jingoo Han > > > +static const struct of_device_id exynos_dp_video_phy_of_match[] = { > > + { .compatible = "samsung,exynos5250-dp-video-phy" }, > > + { }, > > +}; > > +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); > > +#endif > > + > > +static struct platform_driver exynos_dp_video_phy_driver = { > > + .probe = exynos_dp_video_phy_probe, > > + .driver = { > > + .name = "exynos-dp-video-phy", > > + .owner = THIS_MODULE, > > + .of_match_table = exynos_dp_video_phy_of_match, > > + } > > +}; > > +module_platform_driver(exynos_dp_video_phy_driver); > > + > > +MODULE_AUTHOR("Jingoo Han<jg1.han@samsung.com>"); > > +MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver"); > > +MODULE_LICENSE("GPL v2"); > > Thanks, > Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index 5ff208c..3fb656a 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -12,3 +12,11 @@ the PHY specifier identifies the PHY and its meaning is as follows: 1 - MIPI DSIM 0, 2 - MIPI CSIS 1, 3 - MIPI DSIM 1. + +Samsung EXYNOS SoC series DP PHY +------------------------------------------------- + +Required properties: +- compatible : should be "samsung,exynos5250-dp-video-phy"; +- reg : offset and length of the DP PHY register set; +- #phy-cells : from the generic phy bindings, must be 0; \ No newline at end of file diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 6f446d0..760f55a 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -19,4 +19,9 @@ config PHY_EXYNOS_MIPI_VIDEO help Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P and EXYNOS SoCs. + +config PHY_EXYNOS_DP_VIDEO + tristate "EXYNOS SoC series DP PHY driver" + help + Support for DP PHY found on Samsung EXYNOS SoCs. endif diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 71d8841..0fd1340 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c new file mode 100644 index 0000000..75e1d11 --- /dev/null +++ b/drivers/phy/phy-exynos-dp-video.c @@ -0,0 +1,118 @@ +/* + * Samsung EXYNOS SoC series DP PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Jingoo Han <jg1.han@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +/* DPTX_PHY_CONTROL register */ +#define EXYNOS_DPTX_PHY_ENABLE (1 << 0) + +struct exynos_dp_video_phy { + void __iomem *regs; +}; + +static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on) +{ + void __iomem *addr; + u32 reg; + + addr = state->regs; + + reg = readl(addr); + if (on) + reg |= EXYNOS_DPTX_PHY_ENABLE; + else + reg &= ~EXYNOS_DPTX_PHY_ENABLE; + writel(reg, addr); + + return 0; +} + +static int exynos_dp_video_phy_power_on(struct phy *phy) +{ + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); + + return __set_phy_state(state, 1); +} + +static int exynos_dp_video_phy_power_off(struct phy *phy) +{ + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); + + return __set_phy_state(state, 0); +} + +static struct phy_ops exynos_dp_video_phy_ops = { + .power_on = exynos_dp_video_phy_power_on, + .power_off = exynos_dp_video_phy_power_off, + .owner = THIS_MODULE, +}; + +static int exynos_dp_video_phy_probe(struct platform_device *pdev) +{ + struct exynos_dp_video_phy *state; + struct device *dev = &pdev->dev; + struct resource *res; + struct phy_provider *phy_provider; + struct phy *phy; + + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + state->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(state->regs)) + return PTR_ERR(state->regs); + + dev_set_drvdata(dev, state); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + phy = devm_phy_create(dev, 0, &exynos_dp_video_phy_ops, "dp"); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create DP PHY\n"); + return PTR_ERR(phy); + } + phy_set_drvdata(phy, state); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id exynos_dp_video_phy_of_match[] = { + { .compatible = "samsung,exynos5250-dp-video-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); +#endif + +static struct platform_driver exynos_dp_video_phy_driver = { + .probe = exynos_dp_video_phy_probe, + .driver = { + .name = "exynos-dp-video-phy", + .owner = THIS_MODULE, + .of_match_table = exynos_dp_video_phy_of_match, + } +}; +module_platform_driver(exynos_dp_video_phy_driver); + +MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); +MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver"); +MODULE_LICENSE("GPL v2");