This patch adds support for Philips webcam snapshot button as an
event input device, for consistency with other webcam drivers.
Signed-off-by: Pham Thanh Nam <phamthanhnam.ptn@gmail.com>
@@ -35,3 +35,13 @@
Say Y here in order to have the pwc driver generate verbose debugging
messages.
A special module options 'trace' is used to control the verbosity.
+
+config USB_PWC_INPUT_EVDEV
+ bool "USB Philips Cameras input events device support"
+ default y
+ depends on USB_PWC && INPUT
+ ---help---
+ This option makes USB Philips cameras register the snapshot button as
+ an input device to report button events.
+
+ If you are in doubt, say Y.
@@ -38,6 +38,9 @@
#include <linux/videodev.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
+#ifdef CONFIG_USB_PWC_INPUT_EVDEV
+#include <linux/input.h>
+#endif
#include "pwc-uncompress.h"
#include <media/pwc-ioctl.h>
@@ -256,6 +259,9 @@
int pan_angle; /* in degrees * 100 */
int tilt_angle; /* absolute angle; 0,0 is home position */
int snapshot_button_status; /* set to 1 when the user push the button, reset to 0 when this value is read */
+#ifdef CONFIG_USB_PWC_INPUT_EVDEV
+ struct input_dev *button_dev; /* webcam snapshot button input */
+#endif
/*** Misc. data ***/
wait_queue_head_t frameq; /* When waiting for a frame to finish... */
@@ -53,6 +53,7 @@
- Xavier Roche: QuickCam Pro 4000 ID
- Jens Knudsen: QuickCam Zoom ID
- J. Debert: QuickCam for Notebooks ID
+ - Pham Thanh Nam: webcam snapshot button as an event input device
*/
#include <linux/errno.h>
@@ -61,6 +62,13 @@
#include <linux/module.h>
#include <linux/poll.h>
#include <linux/slab.h>
+#ifdef CONFIG_USB_PWC_INPUT_EVDEV
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18)
+#include <linux/usb_input.h>
+#else
+#include <linux/usb/input.h>
+#endif
+#endif
#include <linux/vmalloc.h>
#include <linux/version.h>
#include <asm/io.h>
@@ -587,6 +595,23 @@
pdev->vframe_count);
}
+static void pwc_snapshot_button(struct pwc_device *pdev, int down)
+{
+ if (down) {
+ PWC_TRACE("Snapshot button pressed.\n");
+ pdev->snapshot_button_status = 1;
+ } else {
+ PWC_TRACE("Snapshot button released.\n");
+ }
+
+#ifdef CONFIG_USB_PWC_INPUT_EVDEV
+ if (pdev->button_dev) {
+ input_report_key(pdev->button_dev, BTN_0, down);
+ input_sync(pdev->button_dev);
+ }
+#endif
+}
+
static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_buf *fbuf)
{
int awake = 0;
@@ -604,13 +629,7 @@
pdev->vframes_error++;
}
if ((ptr[0] ^ pdev->vmirror) & 0x01) {
- if (ptr[0] & 0x01) {
- pdev->snapshot_button_status = 1;
- PWC_TRACE("Snapshot button pressed.\n");
- }
- else {
- PWC_TRACE("Snapshot button released.\n");
- }
+ pwc_snapshot_button(pdev, ptr[0] & 0x01);
}
if ((ptr[0] ^ pdev->vmirror) & 0x02) {
if (ptr[0] & 0x02)
@@ -634,12 +653,7 @@
else if (pdev->type == 740 || pdev->type == 720) {
unsigned char *ptr = (unsigned char *)fbuf->data;
if ((ptr[0] ^ pdev->vmirror) & 0x01) {
- if (ptr[0] & 0x01) {
- pdev->snapshot_button_status = 1;
- PWC_TRACE("Snapshot button pressed.\n");
- }
- else
- PWC_TRACE("Snapshot button released.\n");
+ pwc_snapshot_button(pdev, ptr[0] & 0x01);
}
pdev->vmirror = ptr[0] & 0x03;
}
@@ -1221,6 +1235,15 @@
{
pwc_remove_sysfs_files(pdev->vdev);
video_unregister_device(pdev->vdev);
+
+#ifdef CONFIG_USB_PWC_INPUT_EVDEV
+ if (pdev->button_dev) {
+ input_unregister_device(pdev->button_dev);
+ input_free_device(pdev->button_dev);
+ kfree(pdev->button_dev->phys);
+ pdev->button_dev = NULL;
+ }
+#endif
}
/* Note that all cleanup is done in the reverse order as in _open */
@@ -1488,6 +1511,9 @@
int features = 0;
int video_nr = -1; /* default: use next available device */
char serial_number[30], *name;
+#ifdef CONFIG_USB_PWC_INPUT_EVDEV
+ char *phys = NULL;
+#endif
vendor_id = le16_to_cpu(udev->descriptor.idVendor);
product_id = le16_to_cpu(udev->descriptor.idProduct);
@@ -1812,6 +1838,39 @@
pwc_set_leds(pdev, 0, 0);
pwc_camera_power(pdev, 0);
+#ifdef CONFIG_USB_PWC_INPUT_EVDEV
+ /* register webcam snapshot button input device */
+ pdev->button_dev = input_allocate_device();
+ if (!pdev->button_dev) {
+ PWC_ERROR("Err, insufficient memory for webcam snapshot button device.");
+ return -ENOMEM;
+ }
+
+ pdev->button_dev->name = "PWC snapshot button";
+ phys = kasprintf(GFP_KERNEL,"usb-%s-%s", pdev->udev->bus->bus_name, pdev->udev->devpath);
+ if (!phys) {
+ input_free_device(pdev->button_dev);
+ return -ENOMEM;
+ }
+ pdev->button_dev->phys = phys;
+ usb_to_input_id(pdev->udev, &pdev->button_dev->id);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 22)
+ pdev->button_dev->dev.parent = &pdev->udev->dev;
+#else
+ pdev->button_dev->cdev.dev = &pdev->udev->dev;
+#endif
+ pdev->button_dev->evbit[0] = BIT_MASK(EV_KEY);
+ pdev->button_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);
+
+ rc = input_register_device(pdev->button_dev);
+ if (rc) {
+ input_free_device(pdev->button_dev);
+ kfree(pdev->button_dev->phys);
+ pdev->button_dev = NULL;
+ return rc;
+ }
+#endif
+
return 0;
err_unreg: