@@ -0,0 +1,133 @@
+Driver for I2C radios for the Silicon Labs Si4713 FM Radio Transmitters
+
+Copyright (c) 2009 Nokia Corporation
+Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+
+
+Information about the Device
+============================
+This chip is a Silicon Labs product. It is a I2C device, currently on 0×63 address.
+Basically, it has transmission and signal noise level measurement features.
+
+The Si4713 integrates transmit functions for FM broadcast stereo transmission.
+The chip also allows integrated receive power scanning to identify low signal
+power FM channels.
+
+The chip is programmed using commands and responses. There are also several
+properties which can change the behavior of this chip.
+
+Users must comply with local regulations on radio frequency (RF) transmission.
+
+Device driver description
+=========================
+There are two modules to handle this device. One is a I2C device driver
+and the other is a platform driver.
+
+The I2C device driver exports a v4l2-subdev interface to the kernel. Also
+it exports several device properties through sysfs interface to the user land.
+All properties can also be accessed by v4l2 extended controls interface, by
+using the v4l2-subdev calls (g_ext_ctrls, s_ext_ctrls).
+
+The platform device driver exports a v4l2 radio device interface to user land.
+So, it uses the I2C device driver as a sub device in order to send the user
+commands to the actual device. Basically it is a wrapper to the I2C device driver.
+
+So, in summary, the device driver has two interfaces to the user space.
+
+Applications can use v4l2 radio API to specify frequency of operation, mute state,
+etc. But mostly of its properties will be present in the extended controls.
+However, the device properties can also be accessed through its sysfs directory.
+
+When the v4l2 mute property is set to 1 (true), the driver will turn the chip off.
+
+Properties description
+======================
+
+The properties can be accessed in sysfs device directory. Using v4l2 extended
+controls as well.
+
+# ls
+acomp_attack_time modalias rds_radio_text
+acomp_enabled name region
+acomp_gain pilot_deviation region_bottom_frequency
+acomp_release_time pilot_enabled region_channel_spacing
+acomp_threshold pilot_frequency region_preemphasis
+antenna_capacitor power region_top_frequency
+bus power_level stereo_enabled
+driver rds_enabled subsystem
+limiter_deviation rds_pi tune_measure
+limiter_enabled rds_ps_name uevent
+limiter_release_time rds_pty
+
+Here is a summary of them:
+
+* Pilot is an audible tone sent by the device.
+
+pilot_frequency - Configures the frequency of the stereo pilot tone.
+pilot_deviation - Configures pilot tone frequency deviation level.
+pilot_enabled - Enables or disables the pilot tone feature.
+
+* The si4713 device is capable of applying audio compression to the transmitted signal.
+
+acomp_enabled - Enables or disables the audio dynamic range control feature.
+acomp_gain - Sets the gain for audio dynamic range control.
+acomp_threshold - Sets the threshold level for audio dynamic range control.
+acomp_attack_time - Sets the attack time for audio dynamic range control.
+acomp_release_time - Sets the release time for audio dynamic range control.
+
+* Limiter setups audio deviation limiter feature. Once a over deviation occurs,
+it is possible to adjust the front-end gain of the audio input and always
+prevent over deviation.
+
+limiter_enabled - Enables or disables the limiter feature.
+limiter_deviation - Configures audio frequency deviation level.
+limiter_release_time - Sets the limiter release time.
+
+* Tuning power
+
+power_level - Sets the output power level for signal transmission.
+antenna_capacitor - This selects the value of antenna tuning capacitor manually
+or automatically if set to zero.
+tune_measure - With this you can get the value of signal length of a specific frequency.
+
+* RDS related
+
+rds_enabled - Enables or disables the RDS feature.
+rds_ps_name - Sets the RDS ps name field for transmission.
+rds_radio_text - Sets the RDS radio text for transmission.
+rds_pi - Sets the RDS PI field for transmission.
+rds_pty - Sets the RDS PTY field for transmission.
+
+* Region related
+
+Setting region will affect other region properties.
+
+region_bottom_frequency
+region_channel_spacing
+region_preemphasis
+region_top_frequency
+region - Selects which country specific setting should be assumed.
+
+* stereo_enabled - Enables or disables stereo mode.
+
+Testing
+=======
+Testing is usually done with fmtools utility for managing FM tuner cards.
+The tool can be found under Debian/Testing packages.
+
+The basic command list is:
+
+$ fm on # Sets mute = false
+$ fm off # Sets mute = true
+$ fm <freq> # Tunes to the frequency <freq>
+
+Of course, you should have the audio working and play something through alsa
+API to get something different of mute transmitted.
+
+To play with the above described properties, you can just use 'echo' and
+'cat' commands. For example, changing the rds_ps_name property, you just do:
+
+echo "Dummy FM Station" > /sys/bus/i2c/devices/X-0063/rds_ps_name
+
+where "X" is the i2c bus id which the device is connected.
+
# HG changeset patch # User Eduardo Valentin <eduardo.valentin@nokia.com> # Date 1243414607 -10800 # Branch export # Node ID fadf1cddf504609cdb4889f4aa3305ca8d15323a # Parent b1d98e675a3c4e9e6d247701c9ac18239e3dcc1c Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> --- Documentation/video4linux/si4713.txt | 133 ++++++++++++++++++++++++++++++++++ 1 files changed, 133 insertions(+), 0 deletions(-) create mode 100644 Documentation/video4linux/si4713.txt -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html