From patchwork Tue Jun 9 18:50:55 2009 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Murali Karicheri X-Patchwork-Id: 29072 Received: from vger.kernel.org (vger.kernel.org [209.132.176.167]) by demeter.kernel.org (8.14.2/8.14.2) with ESMTP id n59Ip99w002199 for ; Tue, 9 Jun 2009 18:51:10 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753911AbZFISvC (ORCPT ); Tue, 9 Jun 2009 14:51:02 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1757016AbZFISvC (ORCPT ); Tue, 9 Jun 2009 14:51:02 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:38220 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753911AbZFISvA (ORCPT ); Tue, 9 Jun 2009 14:51:00 -0400 Received: from dlep34.itg.ti.com ([157.170.170.115]) by bear.ext.ti.com (8.13.7/8.13.7) with ESMTP id n59IowvV000909 for ; Tue, 9 Jun 2009 13:51:03 -0500 Received: from legion.dal.design.ti.com (localhost [127.0.0.1]) by dlep34.itg.ti.com (8.13.7/8.13.7) with ESMTP id n59IovQN006020; Tue, 9 Jun 2009 13:50:57 -0500 (CDT) Received: from gt516km11.gt.design.ti.com (gt516km11.gt.design.ti.com [158.218.100.179]) by legion.dal.design.ti.com (8.11.7p1+Sun/8.11.7) with ESMTP id n59Iov926190; Tue, 9 Jun 2009 13:50:57 -0500 (CDT) Received: from gt516km11.gt.design.ti.com (localhost.localdomain [127.0.0.1]) by gt516km11.gt.design.ti.com (8.13.1/8.13.1) with ESMTP id n59IouVS020650; Tue, 9 Jun 2009 14:50:56 -0400 Received: (from a0868495@localhost) by gt516km11.gt.design.ti.com (8.13.1/8.13.1/Submit) id n59IouAk020647; Tue, 9 Jun 2009 14:50:56 -0400 From: m-karicheri2@ti.com To: linux-media@vger.kernel.org Cc: davinci-linux-open-source@linux.davincidsp.com, Muralidharan Karicheri , Muralidharan Karicheri Subject: [PATCH 7/10 - v2] DM355 platform changes for vpfe capture driver Date: Tue, 9 Jun 2009 14:50:55 -0400 Message-Id: <1244573456-20625-1-git-send-email-m-karicheri2@ti.com> X-Mailer: git-send-email 1.6.0.4 Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org From: Muralidharan Karicheri DM355 platform and board setup This has platform and board setup changes to support vpfe capture driver for DM355 EVMs. Added registration of vpss platform driver based on last review Reviewed By "Hans Verkuil". Reviewed By "Laurent Pinchart". Signed-off-by: Muralidharan Karicheri --- Applies to Davinci GIT Tree arch/arm/mach-davinci/board-dm355-evm.c | 72 +++++++++++++++++++++++- arch/arm/mach-davinci/dm355.c | 83 ++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/dm355.h | 2 + arch/arm/mach-davinci/include/mach/mux.h | 9 +++ 4 files changed, 163 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 5ac2f56..cf87e21 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -20,6 +20,8 @@ #include #include #include +#include +#include #include #include @@ -134,12 +136,23 @@ static void dm355evm_mmcsd_gpios(unsigned gpio) dm355evm_mmc_gpios = gpio; } +#define TVP5146_I2C_ADDR 0x5D +static struct tvp514x_platform_data tvp5146_pdata = { + .clk_polarity = 0, + .hs_polarity = 1, + .vs_polarity = 1 +}; + static struct i2c_board_info dm355evm_i2c_info[] = { - { I2C_BOARD_INFO("dm355evm_msp", 0x25), + { I2C_BOARD_INFO("dm355evm_msp", 0x25), .platform_data = dm355evm_mmcsd_gpios, - /* plus irq */ }, + }, + { + I2C_BOARD_INFO("tvp5146", TVP5146_I2C_ADDR), + .platform_data = &tvp5146_pdata, + }, + /* { plus irq }, */ /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */ - /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */ }; static void __init evm_init_i2c(void) @@ -178,6 +191,57 @@ static struct platform_device dm355evm_dm9000 = { .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc), }; +#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) +/* Inputs available at the TVP5146 */ +static struct v4l2_input tvp5146_inputs[] = { + { + .index = 0, + .name = "COMPOSITE", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = TVP514X_STD_ALL, + }, + { + .index = 1, + .name = "SVIDEO", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = TVP514X_STD_ALL, + }, +}; + +/* + * this is the route info for connecting each input to decoder + * ouput that goes to vpfe. There is a one to one correspondence + * with tvp5146_inputs + */ +static struct v4l2_routing tvp5146_routes[] = { + { + .input = INPUT_CVBS_VI2B, + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, + }, + { + .input = INPUT_SVIDEO_VI2C_VI1C, + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, + }, +}; + +static struct vpfe_subdev_info vpfe_sub_devs[] = { + { + .name = "tvp5146", + .grp_id = 0, + .num_inputs = ARRAY_SIZE(tvp5146_inputs), + .inputs = tvp5146_inputs, + .routes = tvp5146_routes, + .can_route = 1, + } +}; + +static struct vpfe_config vpfe_cfg = { + .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), + .sub_devs = vpfe_sub_devs, + .card_name = "DM355 EVM", + .ccdc = "DM355 CCDC", +}; + static struct platform_device *davinci_evm_devices[] __initdata = { &dm355evm_dm9000, &davinci_nand_device, @@ -189,6 +253,8 @@ static struct davinci_uart_config uart_config __initdata = { static void __init dm355_evm_map_io(void) { + /* setup input configuration for VPFE input devices */ + dm355_set_vpfe_config(&vpfe_cfg); dm355_init(); } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 9baeed3..3263af8 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -481,6 +481,14 @@ INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false) EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false) EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false) EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false) + +MUX_CFG(DM355, VIN_PCLK, 0, 14, 1, 1, false) +MUX_CFG(DM355, VIN_CAM_WEN, 0, 13, 1, 1, false) +MUX_CFG(DM355, VIN_CAM_VD, 0, 12, 1, 1, false) +MUX_CFG(DM355, VIN_CAM_HD, 0, 11, 1, 1, false) +MUX_CFG(DM355, VIN_YIN_EN, 0, 10, 1, 1, false) +MUX_CFG(DM355, VIN_CINL_EN, 0, 0, 0xff, 0x55, false) +MUX_CFG(DM355, VIN_CINH_EN, 0, 8, 3, 3, false) #endif }; @@ -623,6 +631,67 @@ static struct platform_device dm355_edma_device = { .resource = edma_resources, }; +static struct resource dm355_vpss_resources[] = { + { + /* VPSS BL Base address */ + .name = "vpss", + .start = 0x01c70800, + .end = 0x01c70800 + 0xff, + .flags = IORESOURCE_MEM, + }, + { + /* VPSS CLK Base address */ + .name = "vpss", + .start = 0x01c70000, + .end = 0x01c70000 + 0xf, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm355_vpss_device = { + .name = "vpss", + .id = -1, + .dev.platform_data = "dm355_vpss", + .num_resources = ARRAY_SIZE(dm355_vpss_resources), + .resource = dm355_vpss_resources, +}; + +static struct resource vpfe_resources[] = { + { + .start = IRQ_VDINT0, + .end = IRQ_VDINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_VDINT1, + .end = IRQ_VDINT1, + .flags = IORESOURCE_IRQ, + }, + /* CCDC Base address */ + { + .flags = IORESOURCE_MEM, + .start = 0x01c70600, + .end = 0x01c70600 + 0x1ff, + }, +}; + +static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); +static struct platform_device vpfe_capture_dev = { + .name = CAPTURE_DRV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(vpfe_resources), + .resource = vpfe_resources, + .dev = { + .dma_mask = &vpfe_capture_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void dm355_set_vpfe_config(struct vpfe_config *cfg) +{ + vpfe_capture_dev.dev.platform_data = cfg; +} + /*----------------------------------------------------------------------*/ static struct map_desc dm355_io_desc[] = { @@ -744,6 +813,20 @@ static int __init dm355_init_devices(void) davinci_cfg_reg(DM355_INT_EDMA_CC); platform_device_register(&dm355_edma_device); + platform_device_register(&dm355_vpss_device); + /* + * setup Mux configuration for vpfe input and register + * vpfe capture platform device + */ + davinci_cfg_reg(DM355_VIN_PCLK); + davinci_cfg_reg(DM355_VIN_CAM_WEN); + davinci_cfg_reg(DM355_VIN_CAM_VD); + davinci_cfg_reg(DM355_VIN_CAM_HD); + davinci_cfg_reg(DM355_VIN_YIN_EN); + davinci_cfg_reg(DM355_VIN_CINL_EN); + davinci_cfg_reg(DM355_VIN_CINH_EN); + platform_device_register(&vpfe_capture_dev); + return 0; } postcore_initcall(dm355_init_devices); diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h index 54903b7..e28713c 100644 --- a/arch/arm/mach-davinci/include/mach/dm355.h +++ b/arch/arm/mach-davinci/include/mach/dm355.h @@ -12,11 +12,13 @@ #define __ASM_ARCH_DM355_H #include +#include struct spi_board_info; void __init dm355_init(void); void dm355_init_spi0(unsigned chipselect_mask, struct spi_board_info *info, unsigned len); +void dm355_set_vpfe_config(struct vpfe_config *cfg); #endif /* __ASM_ARCH_DM355_H */ diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index 2737845..f288063 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -154,6 +154,15 @@ enum davinci_dm355_index { DM355_EVT8_ASP1_TX, DM355_EVT9_ASP1_RX, DM355_EVT26_MMC0_RX, + + /* Video In Pin Mux */ + DM355_VIN_PCLK, + DM355_VIN_CAM_WEN, + DM355_VIN_CAM_VD, + DM355_VIN_CAM_HD, + DM355_VIN_YIN_EN, + DM355_VIN_CINL_EN, + DM355_VIN_CINH_EN, }; #ifdef CONFIG_DAVINCI_MUX