From patchwork Sat Aug 29 23:38:35 2009 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: hermann pitton X-Patchwork-Id: 44724 Received: from vger.kernel.org (vger.kernel.org [209.132.176.167]) by demeter.kernel.org (8.14.2/8.14.2) with ESMTP id n7TNpJYb024843 for ; Sat, 29 Aug 2009 23:51:19 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752776AbZH2XvO (ORCPT ); Sat, 29 Aug 2009 19:51:14 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752717AbZH2XvO (ORCPT ); Sat, 29 Aug 2009 19:51:14 -0400 Received: from mail-in-04.arcor-online.net ([151.189.21.44]:47503 "EHLO mail-in-04.arcor-online.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752590AbZH2XvN (ORCPT ); Sat, 29 Aug 2009 19:51:13 -0400 Received: from mail-in-11-z2.arcor-online.net (mail-in-11-z2.arcor-online.net [151.189.8.28]) by mx.arcor.de (Postfix) with ESMTP id BE65D33AB14; Sun, 30 Aug 2009 01:51:13 +0200 (CEST) Received: from mail-in-16.arcor-online.net (mail-in-16.arcor-online.net [151.189.21.56]) by mail-in-11-z2.arcor-online.net (Postfix) with ESMTP id 952E23465CB; Sun, 30 Aug 2009 01:51:13 +0200 (CEST) Received: from [192.168.178.24] (pD9E10D73.dip0.t-ipconnect.de [217.225.13.115]) (Authenticated sender: hermann-pitton@arcor.de) by mail-in-16.arcor-online.net (Postfix) with ESMTPSA id 4F986256D67; Sun, 30 Aug 2009 01:51:13 +0200 (CEST) X-DKIM: Sendmail DKIM Filter v2.8.2 mail-in-16.arcor-online.net 4F986256D67 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=arcor.de; s=mail-in; t=1251589873; bh=voY7JFToIHo4P6pwfTIt+LbksHuVM+PLN3UmATwM7Mc=; h=Subject:From:To:Cc:In-Reply-To:References:Content-Type:Date: Message-Id:Mime-Version; b=EqfKZlWIFzzAjKwBvwvs+E9Fg/Mj/RnDZoRMLUzE0ZaDxhEIEtBMtDNS7OPH0j++2 UQBIyXzBbzFxWv6yZ/M6HMcvj+KupNK+KEAP3tcS6OV825ETyTVq3ma6xGFAkVSLT+ 0esh89NSQ147VNlTrxLM8rrf/r3ITXhSSfN2RIKE= Subject: Re: Pinnacle PCTV 310i active antenna From: hermann pitton To: Martin Konopka Cc: linux-media@vger.kernel.org In-Reply-To: <200908281827.58036.martin.konopka@mknetz.de> References: <200907011701.43079.martin.konopka@mknetz.de> <1248754507.3246.13.camel@pc07.localdom.local> <1251421707.3674.18.camel@pc07.localdom.local> <200908281827.58036.martin.konopka@mknetz.de> Date: Sun, 30 Aug 2009 01:38:35 +0200 Message-Id: <1251589115.26402.11.camel@pc07.localdom.local> Mime-Version: 1.0 X-Mailer: Evolution 2.12.3 (2.12.3-5.fc8) Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Hi Martin, Am Freitag, den 28.08.2009, 18:27 +0200 schrieb Martin Konopka: > Hallo Hermann, > > ich schreibe einmal abseits der Maillingliste, da ich eine Frage zu Windows > habe. Ich konnte mit meiner PCTV 310i die Antennenspannung in der Tv-Software > von Pinnacle nicht aktivieren, da das Feld "Aktivantennen" grau war. Konntest > Du die Antennenspannung dort aktivieren? Der einzige Unterschied scheint eine > etwas neuere Hardwareversion bei mir als bei Dir zu sein: Yes, as replied in German, I can get voltage to the antenna in windows on my card. The older driver from 2005 provides a tool to manually switch it on or off at any time, the current driver has only voltage for DVB-T and that tool is gone. > saa7133[0]: found at 0000:04:06.0, rev: 209, irq: 20, latency: 64, mmio: > 0xfbfff800 > > Ziel ist es aber natürlich, die Spannung unter Linux zu aktivieren. :-) Yes, of course. We don't know, if it is on all cards the same and if all cards do support it. In combination with the LNA unknowns it might improve the mess not to know that too. A testhack, not a clean implementation, is attached and should give you voltage to the active antenna when using DVB-T. BTW, the radio seems to be broken since some weeks. It is not by that patch here. Cheers, Hermann > Vielen Dank! > > Martin > Am Freitag, 28. August 2009 03:08:27 schrieben Sie: > > Hi Martin, > > > > Am Dienstag, den 28.07.2009, 06:15 +0200 schrieb hermann pitton: > > > Hi Martin, > > > > > > Am Montag, den 27.07.2009, 21:36 +0200 schrieb Martin Konopka: > > > > Hi Hermann, > > > > > > > > I'm using kernel 2.6.28-11 on a mythbuntu distribution. I tried to > > > > load the drivers with the card=50 option and antenna_pwr=1. > > > > > > > > [ 8745.007384] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV > > > > 300i DVB-T + PAL [card=50,insmod option] > > > > [ 8745.007628] saa7133[0]: board init: gpio is 600c000 > > > > [ 8745.007641] saa7133[0]: gpio: mode=0x0008000 in=0x6004000 > > > > out=0x0008000 [pre-init] > > > > [ 8745.148374] tuner' 1-004b: chip found @ 0x96 (saa7133[0]) > > > > > > > > [..] > > > > > > > > [ 8802.196576] dvb_init() allocating 1 frontend > > > > [ 8802.196583] saa7133[0]/dvb: pinnacle 300i dvb setup > > > > [ 8802.196845] mt352_read_register: readreg error (reg=127, ret==-5) > > > > [ 8802.196953] saa7133[0]/dvb: frontend initialization failed > > > > > > > > The antenna power is not activated. I then installed microsoft stuff. > > > > To my horror it turned out that the active antenna switch is greyed out > > > > in Pinnacle's TV application. > > > > > > > > So the card obviously does not have an active antenna, although the > > > > manual mentions it. Probably copy and paste from the 300i manual. > > > > > > > > Regards, > > > > > > > > Martin > > > > > > thanks a lot for reporting and for going to all that testing stuff. > > > > > > Since neither Hartmut nor me ever had such a card, Hartmut would be much > > > better than me on such, we should be able to exclude active voltage to > > > support the antenna on it now. > > > > > > For the other issues since 2.6.26 I don't have new ideas and such cards > > > seem not to be available on some e/xbay currently. > > > > > > The Hauppauge/Pinnacle US guys can't help much either currently and > > > there is no reason to blame them for something they don't know. (yet) > > > > > > So it is only what is posted so far. > > > > > > Thanks, > > > Hermann > > > > also for the record. > > > > The early variant of the 310i I have now has clearly support for 5 Volt > > antenna output. Easy to measure. > > > > I can install currently three different driver versions under vista, all > > with different gpio configuration. The one for testing the 5 Volt switch > > for now is with the original driver CD from 2005. > > > > Unfortunately, it has also these always changing gpios, like the TS > > interface is always on, but the voltage switch is no problem on vista > > with that old XP driver. Other stuff is ... > > > > dmesg from mine. > > > > saa7133[1]: registered device video1 [v4l2] > > saa7133[1]: registered device vbi1 > > saa7133[2]: setting pci latency timer to 64 > > saa7133[2]: found at 0000:04:03.0, rev: 208, irq: 21, latency: 64, mmio: > > 0xfebfe800 saa7133[2]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i > > [card=101,insmod option] saa7133[2]: board init: gpio is 600e000 > > IRQ 21/saa7133[2]: IRQF_DISABLED is not guaranteed on shared IRQs > > saa7133[2]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 > > saa7133[2]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2c b0 22 ff ff > > saa7133[2]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a5 ff 21 00 c2 > > saa7133[2]: i2c eeprom 30: 96 10 03 32 15 20 ff ff 0c 22 17 88 03 44 31 f9 > > saa7133[2]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > saa7133[2]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > saa7133[2]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > saa7133[2]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > saa7133[2]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > saa7133[2]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > saa7133[2]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > saa7133[2]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > saa7133[2]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > saa7133[2]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > saa7133[2]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > saa7133[2]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > input: i2c IR (Pinnacle PCTV) as /class/input/input6 > > ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-3/3-0047/ir0 > > [saa7133[2]] tuner 3-004b: chip found @ 0x96 (saa7133[2]) > > tda829x 3-004b: setting tuner address to 61 > > tda829x 3-004b: type set to tda8290+75a > > saa7133[2]: registered device video2 [v4l2] > > saa7133[2]: registered device vbi2 > > saa7133[2]: registered device radio0 > > dvb_init() allocating 1 frontend > > DVB: registering new adapter (saa7133[0]) > > DVB: registering adapter 0 frontend 0 (Philips TDA10086 DVB-S)... > > dvb_init() allocating 1 frontend > > DVB: registering new adapter (saa7133[1]) > > DVB: registering adapter 1 frontend 0 (Philips TDA10086 DVB-S)... > > dvb_init() allocating 1 frontend > > DVB: registering new adapter (saa7133[2]) > > DVB: registering adapter 2 frontend 0 (Philips TDA10046H DVB-T)... > > tda1004x: setting up plls for 48MHz sampling clock > > tda1004x: found firmware revision 29 -- ok > > > > board init: gpio is 600e000 can also change to 0x600c000. > > > > BTW, not totally unrelated, the recent NXP Creatix driver for the Medion > > Quad (CTX944) does support also 13 Volt on the second DVB-S device now. > > > > Another problem we still have to resolve. > > > > Cheers, > > Hermann > > > > > > Am Sonntag, 5. Juli 2009 02:18:01 schrieben Sie: > > > > > Hi Martin, > > > > > > > > > > Am Mittwoch, den 01.07.2009, 17:01 +0200 schrieb Martin Konopka: > > > > > > Hi all, > > > > > > > > > > > > my Pinnacle 310i is working well with linux, except for the active > > > > > > antenna that is attached to it. I need it in order to watch some > > > > > > weaker channels. Is there any way to activate the antenna power of > > > > > > this card with recent drivers? The Windows software has an option > > > > > > to do that. > > > > > > > > > > on which kernel you are currently? > > > > > > > > > > We have some reports, that what was assumed to be support for an > > > > > additional LNA on it is broken on 2.6.26 and onwards, IIRC. > > > > > > > > > > There are no previous reports for such an active antenna switch for > > > > > the 310i I do believe, but Gerd had such an option for the earlier > > > > > 300i. (card=50) > > > > > > > > > > If you don't have any further details, like gpio settings reported > > > > > from DScaler's regspy, you might try to force the use of that card, > > > > > nothing won't work, but eventually you get voltage to the antenna. > > > > > ("modinfo saa7134-dvb") > > > > > > > > > > Cheers, > > > > > Hermann > > diff -r 6f58a5d8c7c6 linux/drivers/media/video/saa7134/saa7134-cards.c --- a/linux/drivers/media/video/saa7134/saa7134-cards.c Sat Aug 29 09:01:54 2009 -0300 +++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Sun Aug 30 00:13:19 2009 +0200 @@ -3244,29 +3244,38 @@ .radio_addr = ADDR_UNSET, .tuner_config = 1, .mpeg = SAA7134_MPEG_DVB, - .gpiomask = 0x000200000, - .inputs = {{ - .name = name_tv, - .vmux = 4, - .amux = TV, - .tv = 1, - },{ - .name = name_comp1, - .vmux = 1, - .amux = LINE2, - },{ - .name = name_comp2, - .vmux = 0, - .amux = LINE2, - },{ - .name = name_svideo, - .vmux = 8, - .amux = LINE2, - }}, - .radio = { - .name = name_radio, - .amux = TV, - .gpio = 0x0200000, + .gpiomask = 0x04200000, + .inputs = {{ + .name = name_tv, + .vmux = 4, + .amux = TV, + .tv = 1, + .gpio = 0x04000000, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE2, + .gpio = 0x04000000, + }, { + .name = name_comp2, + .vmux = 0, + .amux = LINE2, + .gpio = 0x04000000, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + .gpio = 0x04000000, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x04200000, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x04000000, }, }, [SAA7134_BOARD_AVERMEDIA_STUDIO_507] = { diff -r 6f58a5d8c7c6 linux/drivers/media/video/saa7134/saa7134-dvb.c --- a/linux/drivers/media/video/saa7134/saa7134-dvb.c Sat Aug 29 09:01:54 2009 -0300 +++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c Sun Aug 30 00:13:19 2009 +0200 @@ -514,8 +514,8 @@ switch (state->config->antenna_switch) { case 0: break; - case 1: dprintk("setting GPIO21 to 0 (TV antenna?)\n"); - saa7134_set_gpio(dev, 21, 0); + case 1: dprintk("setting GPIO26 to 0 (antenna voltage on)\n"); + saa7134_set_gpio(dev, 26, 0); break; case 2: dprintk("setting GPIO21 to 1 (Radio antenna?)\n"); saa7134_set_gpio(dev, 21, 1); @@ -531,8 +531,8 @@ switch (state->config->antenna_switch) { case 0: break; - case 1: dprintk("setting GPIO21 to 1 (Radio antenna?)\n"); - saa7134_set_gpio(dev, 21, 1); + case 1: dprintk("setting GPIO26 to 1 (antenna voltage off)\n"); + saa7134_set_gpio(dev, 26, 1); break; case 2: dprintk("setting GPIO21 to 0 (TV antenna?)\n"); saa7134_set_gpio(dev, 21, 0); @@ -673,6 +673,7 @@ .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x61, + .antenna_switch = 1, .request_firmware = philips_tda1004x_request_firmware };