@@ -47,6 +47,7 @@
#define TM6010_BOARD_BEHOLD_WANDER 10
#define TM6010_BOARD_BEHOLD_VOYAGER 11
#define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12
+#define TM6010_BOARD_TWINHAN_TU501 13
#define TM6000_MAXBOARDS 16
static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
@@ -169,7 +170,7 @@ struct tm6000_board tm6000_boards[] = {
.gpio_addr_tun_reset = TM6000_GPIO_4,
},
[TM6010_BOARD_HAUPPAUGE_900H] = {
- .name = "Hauppauge HVR-900H",
+ .name = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick",
.tuner_type = TUNER_XC2028, /* has a XC3028 */
.tuner_addr = 0xc2 >> 1,
.demod_addr = 0x1e >> 1,
@@ -180,7 +181,7 @@ struct tm6000_board tm6000_boards[] = {
.has_zl10353 = 1,
.has_eeprom = 1,
},
- .gpio_addr_tun_reset = TM6000_GPIO_2,
+ .gpio_addr_tun_reset = TM6010_GPIO_2,
},
[TM6010_BOARD_BEHOLD_WANDER] = {
.name = "Beholder Wander DVB-T/TV/FM USB2.0",
@@ -212,7 +213,22 @@ struct tm6000_board tm6000_boards[] = {
.gpio_addr_tun_reset = TM6000_GPIO_2,
},
[TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
- .name = "Terratec Cinergy Hybrid XE",
+ .name = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick",
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ },
+ .gpio_addr_tun_reset = TM6010_GPIO_2,
+ },
+ [TM6010_BOARD_TWINHAN_TU501] = {
+ .name = "Twinhan TU501(704D1)",
.tuner_type = TUNER_XC2028, /* has a XC3028 */
.tuner_addr = 0xc2 >> 1,
.demod_addr = 0x1e >> 1,
@@ -236,9 +252,17 @@ struct usb_device_id tm6000_id_table [] = {
{ USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
{ USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
{ USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
{ USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER },
{ USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER },
{ USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
+ { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
+ { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
{ },
};
@@ -271,7 +295,9 @@ int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
case 0:
/* newer tuner can faster reset */
switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
dev->tuner_reset_gpio, 0x01);
msleep(60);
@@ -328,11 +354,11 @@ int tm6000_cards_setup(struct tm6000_core *dev)
*/
switch (dev->model) {
case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
/* Turn xceive 3028 on */
tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_3, 0x01);
- msleep(11);
- break;
- case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ msleep(15);
/* Turn zarlink zl10353 on */
tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_4, 0x00);
msleep(15);
@@ -445,6 +471,7 @@ static void tm6000_config_tuner (struct tm6000_core *dev)
switch(dev->model) {
case TM6010_BOARD_HAUPPAUGE_900H:
case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
ctl.fname = "xc3028L-v36.fw";
break;
default: