diff mbox

V4L/DVB: mx1-camera: compile fix

Message ID 1269726133-12377-1-git-send-email-u.kleine-koenig@pengutronix.de (mailing list archive)
State Superseded
Headers show

Commit Message

Uwe Kleine-König March 27, 2010, 9:42 p.m. UTC
None
diff mbox

Patch

diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
index 07be8ad..4b63b05 100644
--- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
@@ -31,7 +31,13 @@ 
 #define DMA_MODE_WRITE		1
 #define DMA_MODE_MASK		1
 
-#define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR)
+#define MX1_DMA_REG(offset)	MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset))
+
+/* DMA Interrupt Mask Register */
+#define MX1_DMA_DIMR		MX1_DMA_REG(0x08)
+
+/* Channel Control Register */
+#define MX1_DMA_CCR(x)		MX1_DMA_REG(0x8c + ((x) << 6))
 
 #define IMX_DMA_MEMSIZE_32	(0 << 4)
 #define IMX_DMA_MEMSIZE_8	(1 << 4)
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index c167cc3..aa81acd 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -48,8 +48,6 @@ 
 /*
  * CSI registers
  */
-#define DMA_CCR(x)	(0x8c + ((x) << 6))	/* Control Registers */
-#define DMA_DIMR	0x08			/* Interrupt mask Register */
 #define CSICR1		0x00			/* CSI Control Register 1 */
 #define CSISR		0x08			/* CSI Status Register */
 #define CSIRXR		0x10			/* CSI RxFIFO Register */
@@ -783,7 +781,7 @@  static int __init mx1_camera_probe(struct platform_device *pdev)
 			       pcdev);
 
 	imx_dma_config_channel(pcdev->dma_chan, IMX_DMA_TYPE_FIFO,
-			       IMX_DMA_MEMSIZE_32, DMA_REQ_CSI_R, 0);
+			       IMX_DMA_MEMSIZE_32, MX1_DMA_REQ_CSI_R, 0);
 	/* burst length : 16 words = 64 bytes */
 	imx_dma_config_burstlen(pcdev->dma_chan, 0);
 
@@ -797,8 +795,8 @@  static int __init mx1_camera_probe(struct platform_device *pdev)
 	set_fiq_handler(&mx1_camera_sof_fiq_start, &mx1_camera_sof_fiq_end -
 						   &mx1_camera_sof_fiq_start);
 
-	regs.ARM_r8 = DMA_BASE + DMA_DIMR;
-	regs.ARM_r9 = DMA_BASE + DMA_CCR(pcdev->dma_chan);
+	regs.ARM_r8 = (long)MX1_DMA_DIMR;
+	regs.ARM_r9 = (long)MX1_DMA_CCR(pcdev->dma_chan);
 	regs.ARM_r10 = (long)pcdev->base + CSICR1;
 	regs.ARM_fp = (long)pcdev->base + CSISR;
 	regs.ARM_sp = 1 << pcdev->dma_chan;