@@ -36,6 +36,21 @@ config S5PC100_SETUP_SDHCI_GPIO
help
Common setup code for SDHCI gpio.
+config S5PC100_SETUP_FIMC0
+ bool
+ help
+ Setup code for FIMC controller 0
+
+config S5PC100_SETUP_FIMC1
+ bool
+ help
+ Setup code for FIMC controller 1
+
+config S5PC100_SETUP_FIMC2
+ bool
+ help
+ Setup code for FIMC controller 2
+
config MACH_SMDKC100
bool "SMDKC100"
select CPU_S5PC100
@@ -25,6 +25,9 @@ obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
# device support
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+obj-$(CONFIG_S5PC100_SETUP_FIMC0) += setup-fimc0.o
+obj-$(CONFIG_S5PC100_SETUP_FIMC1) += setup-fimc1.o
+obj-$(CONFIG_S5PC100_SETUP_FIMC2) += setup-fimc2.o
# machine support
@@ -112,6 +112,11 @@
#define S5PC100_PA_SDRAM (0x20000000)
#define S5P_PA_SDRAM S5PC100_PA_SDRAM
+/* FIMC */
+#define S5PC100_PA_FIMC0 (0xEE200000)
+#define S5PC100_PA_FIMC1 (0xEE300000)
+#define S5PC100_PA_FIMC2 (0xEE400000)
+
/* compatibiltiy defines. */
#define S3C_PA_UART S5PC100_PA_UART
#define S3C_PA_IIC S5PC100_PA_IIC0
@@ -134,5 +139,8 @@
#define S3C_PA_ONENAND S5PC100_PA_ONENAND
#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF
#define S3C_SZ_ONENAND_BUF S5PC100_SZ_ONENAND_BUF
+#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
+#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
+#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
#endif /* __ASM_ARCH_C100_MAP_H */
new file mode 100644
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5pc100/setup-fimc0.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * S5PC100 - setup and capabilities definitions for S5P FIMC device 0
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/fimc.h>
+
+struct samsung_plat_fimc s5p_fimc0_default_data __initdata = {
+ .capability = S5P_FIMC_IN_ROT | S5P_FIMC_OUT_ROT,
+ /* scaler input pixel size constraints */
+ .scaler_en_w = 3264,
+ .scaler_dis_w = 8192,
+ /* input rotator limits for (input) image pixel size */
+ .in_rot_en_h = 1280,
+ .in_rot_dis_w = 8192,
+ /* output rotator limits for (output) image pixel size */
+ .out_rot_en_w = 1280,
+ .out_rot_dis_w = 3264
+};
new file mode 100644
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5pc100/setup-fimc1.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * S5PC100 - setup and capabilities definitions for S5P FIMC device 1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/fimc.h>
+
+struct samsung_plat_fimc s5p_fimc1_default_data __initdata = {
+ .capability = S5P_FIMC_IN_ROT | S5P_FIMC_OUT_ROT,
+ /* scaler input pixel size constraints */
+ .scaler_en_w = 1280,
+ .scaler_dis_w = 8192,
+ /* input rotator limits for (input) image pixel size */
+ .in_rot_en_h = 768,
+ .in_rot_dis_w = 8192,
+ /* output rotator limits for (output) image pixel size */
+ .out_rot_en_w = 768,
+ .out_rot_dis_w = 1280
+};
new file mode 100644
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5pc100/setup-fimc2.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * S5PC100 - setup and capabilities definitions for S5P FIMC device 2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/fimc.h>
+
+struct samsung_plat_fimc s5p_fimc2_default_data __initdata = {
+ .capability = 0,
+ /* scaler input pixel size constraints */
+ .scaler_en_w = 1440,
+ .scaler_dis_w = 8192,
+ /* input rotator limits for (input) image pixel size */
+ .in_rot_en_h = 0,
+ .in_rot_dis_w = 1440,
+ /* output rotator limits for (output) image pixel size */
+ .out_rot_en_w = 0,
+ .out_rot_dis_w = 1440
+};
@@ -32,6 +32,21 @@ config S5PV210_SETUP_FB_24BPP
help
Common setup code for S5PV210 with an 24bpp RGB display helper.
+config S5PV210_SETUP_FIMC0
+ bool
+ help
+ Setup code for FIMC controller 0
+
+config S5PV210_SETUP_FIMC1
+ bool
+ help
+ Setup code for FIMC controller 1
+
+config S5PV210_SETUP_FIMC2
+ bool
+ help
+ Setup code for FIMC controller 2
+
config S5PV210_SETUP_SDHCI
bool
select S5PV210_SETUP_SDHCI_GPIO
@@ -33,3 +33,6 @@ obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_S5PV210_SETUP_FIMC0) += setup-fimc0.o
+obj-$(CONFIG_S5PV210_SETUP_FIMC1) += setup-fimc1.o
+obj-$(CONFIG_S5PV210_SETUP_FIMC2) += setup-fimc2.o
@@ -92,6 +92,11 @@
#define S5PV210_PA_ADC (0xE1700000)
+/* FIMC */
+#define S5PV210_PA_FIMC0 (0xFB200000)
+#define S5PV210_PA_FIMC1 (0xFB300000)
+#define S5PV210_PA_FIMC2 (0xFB400000)
+
/* compatibiltiy defines. */
#define S3C_PA_UART S5PV210_PA_UART
#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
@@ -104,5 +109,8 @@
#define S3C_PA_WDT S5PV210_PA_WATCHDOG
#define SAMSUNG_PA_ADC S5PV210_PA_ADC
+#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
+#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
+#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
#endif /* __ASM_ARCH_MAP_H */
new file mode 100644
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5pv210/setup-fimc0.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * S5PV210 - setup and capabilities definitions for S5P FIMC device 0
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/fimc.h>
+
+struct samsung_plat_fimc s5p_fimc0_default_data __initdata = {
+ .capability = S5P_FIMC_IN_ROT | S5P_FIMC_OUT_ROT,
+ /* scaler input pixel size constraints */
+ .scaler_en_w = 4224,
+ .scaler_dis_w = 8192,
+ /* input rotator limits for (input) image pixel size */
+ .in_rot_en_h = 1920,
+ .in_rot_dis_w = 8192,
+ /* output rotator limits for (output) image pixel size */
+ .out_rot_en_w = 1920,
+ .out_rot_dis_w = 4224
+};
new file mode 100644
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5pv210/setup-fimc1.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * S5PV210 - setup and capabilities definitions for S5P FIMC device 1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/fimc.h>
+
+struct samsung_plat_fimc s5p_fimc1_default_data __initdata = {
+ .capability = S5P_FIMC_IN_ROT | S5P_FIMC_OUT_ROT,
+ /* scaler input pixel size constraints */
+ .scaler_en_w = 4224,
+ .scaler_dis_w = 8192,
+ /* input rotator limits for (input) image pixel size */
+ .in_rot_en_h = 1920,
+ .in_rot_dis_w = 8192,
+ /* output rotator limits for (output) image pixel size */
+ .out_rot_en_w = 1920,
+ .out_rot_dis_w = 4224
+};
new file mode 100644
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5pv210/setup-fimc2.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * S5PV210 - setup and capabilities definitions for S5P FIMC device 2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/fimc.h>
+
+struct samsung_plat_fimc s5p_fimc2_default_data __initdata = {
+ .capability = S5P_FIMC_IN_ROT | S5P_FIMC_OUT_ROT,
+ /* scaler input pixel size constraints */
+ .scaler_en_w = 1920,
+ .scaler_dis_w = 8192,
+ /* input rotator limits for (input) image pixel size */
+ .in_rot_en_h = 1280,
+ .in_rot_dis_w = 8192,
+ /* output rotator limits for (output) image pixel size */
+ .out_rot_en_w = 1280,
+ .out_rot_dis_w = 1920
+};
@@ -5,6 +5,22 @@
#
# Licensed under GPLv2
+config S5P_DEV_FIMC0
+ bool
+ help
+ Compile in platform device definitions for FIMC controller 0
+
+config S5P_DEV_FIMC1
+ bool
+ help
+ Compile in platform device definitions for FIMC controller 1
+
+config S5P_DEV_FIMC2
+ bool
+ help
+ Compile in platform device definitions for FIMC controller 2
+
+
config PLAT_S5P
bool
depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210)
@@ -18,3 +18,6 @@ obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
+obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o
+obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o
+obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o
new file mode 100644
@@ -0,0 +1,58 @@
+/* linux/arch/arm/plat-s5p/dev-fimc0.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC0 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <plat/fimc.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+
+
+static struct resource s5p_fimc_resource[] = {
+ [0] = {
+ .start = S5P_PA_FIMC0,
+ .end = S5P_PA_FIMC0 + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FIMC0,
+ .end = IRQ_FIMC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s5p_device_fimc0 = {
+ .name = "s5p-fimc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p_fimc_resource),
+ .resource = s5p_fimc_resource,
+};
+
+
+void __init s5p_fimc0_set_platdata(struct samsung_plat_fimc *pd)
+{
+ struct samsung_plat_fimc *npd;
+
+ if (!pd)
+ pd = &s5p_fimc0_default_data;
+
+ npd = kmemdup(pd, sizeof(*npd), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: platform_data allocation failed\n",
+ __func__);
+
+ s5p_device_fimc0.dev.platform_data = npd;
+}
+
new file mode 100644
@@ -0,0 +1,56 @@
+/* linux/arch/arm/plat-s5p/dev-fimc1.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC1 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <plat/fimc.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+
+static struct resource s5p_fimc_resource[] = {
+ [0] = {
+ .start = S5P_PA_FIMC1,
+ .end = S5P_PA_FIMC1 + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FIMC1,
+ .end = IRQ_FIMC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s5p_device_fimc1 = {
+ .name = "s5p-fimc",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5p_fimc_resource),
+ .resource = s5p_fimc_resource,
+};
+
+void __init s5p_fimc1_set_platdata(struct samsung_plat_fimc *pd)
+{
+ struct samsung_plat_fimc *npd;
+
+ if (!pd)
+ pd = &s5p_fimc1_default_data;
+
+ npd = kmemdup(pd, sizeof(*npd), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: platform_data allocation failed\n",
+ __func__);
+
+ s5p_device_fimc1.dev.platform_data = npd;
+}
+
new file mode 100644
@@ -0,0 +1,56 @@
+/* linux/arch/arm/plat-s5p/dev-fimc2.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC2 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <plat/fimc.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+
+static struct resource s5p_fimc_resource[] = {
+ [0] = {
+ .start = S5P_PA_FIMC2,
+ .end = S5P_PA_FIMC2 + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FIMC2,
+ .end = IRQ_FIMC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s5p_device_fimc2 = {
+ .name = "s5p-fimc",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s5p_fimc_resource),
+ .resource = s5p_fimc_resource,
+};
+
+void __init s5p_fimc2_set_platdata(struct samsung_plat_fimc *pd)
+{
+ struct samsung_plat_fimc *npd;
+
+ if (!pd)
+ pd = &s5p_fimc2_default_data;
+
+ npd = kmemdup(pd, sizeof(*npd), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: platform_data allocation failed\n",
+ __func__);
+
+ s5p_device_fimc2.dev.platform_data = npd;
+}
+
new file mode 100644
@@ -0,0 +1,355 @@
+/* arch/arm/plat-s5p/include/plat/regs-fimc.h
+ *
+ * Register definition file for Samsung Camera Interface (FIMC) driver
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef REGS_FIMC_H_
+#define REGS_FIMC_H_
+
+#define S5P_CIOYSA(__x) (0x18 + (__x) * 4)
+#define S5P_CIOCBSA(__x) (0x28 + (__x) * 4)
+#define S5P_CIOCRSA(__x) (0x38 + (__x) * 4)
+
+/* Input source format */
+#define S5P_CISRCFMT 0x00
+/* Window offset */
+#define S5P_CIWDOFST 0x04
+/* Global control */
+#define S5P_CIGCTRL 0x08
+/* Window offset 2 */
+#define S5P_CIWDOFST2 0x14
+/* Output DMA Y 1st frame start address */
+#define S5P_CIOYSA1 0x18
+/* Output DMA Y 2nd frame start address */
+#define S5P_CIOYSA2 0x1c
+/* Output DMA Y 3rd frame start address */
+#define S5P_CIOYSA3 0x20
+/* Output DMA Y 4th frame start address */
+#define S5P_CIOYSA4 0x24
+/* Output DMA Cb 1st frame start address */
+#define S5P_CIOCBSA1 0x28
+/* Output DMA Cb 2nd frame start address */
+#define S5P_CIOCBSA2 0x2c
+/* Output DMA Cb 3rd frame start address */
+#define S5P_CIOCBSA3 0x30
+/* Output DMA Cb 4th frame start address */
+#define S5P_CIOCBSA4 0x34
+/* Output DMA Cr 1st frame start address */
+#define S5P_CIOCRSA1 0x38
+/* Output DMA Cr 2nd frame start address */
+#define S5P_CIOCRSA2 0x3c
+/* Output DMA Cr 3rd frame start address */
+#define S5P_CIOCRSA3 0x40
+/* Output DMA Cr 4th frame start address */
+#define S5P_CIOCRSA4 0x44
+/* Target image format */
+#define S5P_CITRGFMT 0x48
+/* Output DMA control */
+#define S5P_CIOCTRL 0x4c
+/* Pre-scaler control 1 */
+#define S5P_CISCPRERATIO 0x50
+/* Pre-scaler control 2 */
+#define S5P_CISCPREDST 0x54
+/* Main scaler control */
+#define S5P_CISCCTRL 0x58
+/* Target area */
+#define S5P_CITAREA 0x5c
+/* Status */
+#define S5P_CISTATUS 0x64
+/* Image capture enable command */
+#define S5P_CIIMGCPT 0xc0
+/* Capture sequence */
+#define S5P_CICPTSEQ 0xc4
+/* Image effects */
+#define S5P_CIIMGEFF 0xd0
+/* Y frame start address for input DMA */
+#define S5P_CIIYSA0 0xd4
+/* Cb frame start address for input DMA */
+#define S5P_CIICBSA0 0xd8
+/* Cr frame start address for input DMA */
+#define S5P_CIICRSA0 0xdc
+/* Real input DMA image size */
+#define S5P_CIREAL_ISIZE 0xf8
+/* Input DMA control */
+#define S5P_MSCTRL 0xfc
+/* Output DMA Y offset */
+#define S5P_CIOYOFF 0x168
+/* Output DMA CB offset */
+#define S5P_CIOCBOFF 0x16c
+/* Output DMA CR offset */
+#define S5P_CIOCROFF 0x170
+/* Input DMA Y offset */
+#define S5P_CIIYOFF 0x174
+/* Input DMA CB offset */
+#define S5P_CIICBOFF 0x178
+/* Input DMA CR offset */
+#define S5P_CIICROFF 0x17c
+/* Input DMA original image size */
+#define S5P_ORGISIZE 0x180
+/* Output DMA original image size */
+#define S5P_ORGOSIZE 0x184
+/* Real output DMA image size */
+#define S5P_CIEXTEN 0x188
+/* DMA parameter */
+#define S5P_CIDMAPARAM 0x18c
+/* MIPI CSI image format */
+#define S5P_CSIIMGFMT 0x194
+
+
+#define S5P_CISRCFMT_SOURCEHSIZE(x) ((x) << 16)
+#define S5P_CISRCFMT_SOURCEVSIZE(x) ((x) << 0)
+
+#define S5P_CIWDOFST_WINHOROFST(x) ((x) << 16)
+#define S5P_CIWDOFST_WINVEROFST(x) ((x) << 0)
+
+#define S5P_CIWDOFST2_WINHOROFST2(x) ((x) << 16)
+#define S5P_CIWDOFST2_WINVEROFST2(x) ((x) << 0)
+
+#define S5P_CITRGFMT_TARGETHSIZE(x) ((x) << 16)
+#define S5P_CITRGFMT_TARGETVSIZE(x) ((x) << 0)
+
+#define S5P_CISCPRERATIO_SHFACTOR(x) ((x) << 28)
+#define S5P_CISCPRERATIO_PREHORRATIO(x) ((x) << 16)
+#define S5P_CISCPRERATIO_PREVERRATIO(x) ((x) << 0)
+
+#define S5P_CISCPREDST_PREDSTWIDTH(x) ((x) << 16)
+#define S5P_CISCPREDST_PREDSTHEIGHT(x) ((x) << 0)
+
+#define S5P_CISCCTRL_MAINHORRATIO(x) ((x) << 16)
+#define S5P_CISCCTRL_MAINVERRATIO(x) ((x) << 0)
+
+#define S5P_CITAREA_TARGET_AREA(x) ((x) << 0)
+
+#define S5P_CIIMGEFF_PAT_CB(x) ((x) << 13)
+#define S5P_CIIMGEFF_PAT_CR(x) ((x) << 0)
+
+#define S5P_CIREAL_ISIZE_HEIGHT(x) ((x) << 16)
+#define S5P_CIREAL_ISIZE_WIDTH(x) ((x) << 0)
+
+#define S5P_MSCTRL_SUCCESSIVE_COUNT(x) ((x) << 24)
+
+#define S5P_CIOYOFF_VERTICAL(x) ((x) << 16)
+#define S5P_CIOYOFF_HORIZONTAL(x) ((x) << 0)
+
+#define S5P_CIOCBOFF_VERTICAL(x) ((x) << 16)
+#define S5P_CIOCBOFF_HORIZONTAL(x) ((x) << 0)
+
+#define S5P_CIOCROFF_VERTICAL(x) ((x) << 16)
+#define S5P_CIOCROFF_HORIZONTAL(x) ((x) << 0)
+
+#define S5P_CIIYOFF_VERTICAL(x) ((x) << 16)
+#define S5P_CIIYOFF_HORIZONTAL(x) ((x) << 0)
+
+#define S5P_CIICBOFF_VERTICAL(x) ((x) << 16)
+#define S5P_CIICBOFF_HORIZONTAL(x) ((x) << 0)
+
+#define S5P_CIICROFF_VERTICAL(x) ((x) << 16)
+#define S5P_CIICROFF_HORIZONTAL(x) ((x) << 0)
+
+#define S5P_ORGISIZE_VERTICAL(x) ((x) << 16)
+#define S5P_ORGISIZE_HORIZONTAL(x) ((x) << 0)
+
+#define S5P_ORGOSIZE_VERTICAL(x) ((x) << 16)
+#define S5P_ORGOSIZE_HORIZONTAL(x) ((x) << 0)
+
+
+/* Register's bit definitions */
+
+/* Source format register */
+#define S5P_CISRCFMT_ITU601_8BIT (1 << 31)
+#define S5P_CISRCFMT_ITU656_8BIT (0 << 31)
+#define S5P_CISRCFMT_ITU601_16BIT (1 << 29)
+#define S5P_CISRCFMT_ORDER422_YCBYCR (0 << 14)
+#define S5P_CISRCFMT_ORDER422_YCRYCB (1 << 14)
+#define S5P_CISRCFMT_ORDER422_CBYCRY (2 << 14)
+#define S5P_CISRCFMT_ORDER422_CRYCBY (3 << 14)
+/* ITU601 16bit only */
+#define S5P_CISRCFMT_ORDER422_Y4CBCRCBCR (0 << 14)
+/* ITU601 16bit only */
+#define S5P_CISRCFMT_ORDER422_Y4CRCBCRCB (1 << 14)
+
+/* Window offset register */
+#define S5P_CIWDOFST_WINOFSEN (1 << 31)
+#define S5P_CIWDOFST_CLROVFIY (1 << 30)
+#define S5P_CIWDOFST_CLROVRLB (1 << 29)
+#define S5P_CIWDOFST_WINHOROFST_MASK (0x7ff << 16)
+#define S5P_CIWDOFST_CLROVFICB (1 << 15)
+#define S5P_CIWDOFST_CLROVFICR (1 << 14)
+#define S5P_CIWDOFST_WINVEROFST_MASK (0xfff << 0)
+
+/* Global control register */
+#define S5P_CIGCTRL_SWRST (1 << 31)
+#define S5P_CIGCTRL_CAMRST_A (1 << 30)
+#define S5P_CIGCTRL_SELCAM_ITU_B (0 << 29)
+#define S5P_CIGCTRL_SELCAM_ITU_A (1 << 29)
+#define S5P_CIGCTRL_SELCAM_ITU_MASK (1 << 29)
+#define S5P_CIGCTRL_TESTPAT_NORMAL (0 << 27)
+#define S5P_CIGCTRL_TESTPAT_COLOR_BAR (1 << 27)
+#define S5P_CIGCTRL_TESTPAT_HOR_INC (2 << 27)
+#define S5P_CIGCTRL_TESTPAT_VER_INC (3 << 27)
+#define S5P_CIGCTRL_TESTPAT_MASK (3 << 27)
+#define S5P_CIGCTRL_TESTPAT_SHIFT (27)
+#define S5P_CIGCTRL_INVPOLPCLK (1 << 26)
+#define S5P_CIGCTRL_INVPOLVSYNC (1 << 25)
+#define S5P_CIGCTRL_INVPOLHREF (1 << 24)
+#define S5P_CIGCTRL_IRQ_OVFEN (1 << 22)
+#define S5P_CIGCTRL_HREF_MASK (1 << 21)
+#define S5P_CIGCTRL_IRQ_EDGE (0 << 20)
+#define S5P_CIGCTRL_IRQ_LEVEL (1 << 20)
+#define S5P_CIGCTRL_IRQ_CLR (1 << 19)
+#define S5P_CIGCTRL_IRQ_DISABLE (0 << 16)
+#define S5P_CIGCTRL_IRQ_ENABLE (1 << 16)
+#define S5P_CIGCTRL_SHDW_DISABLE (1 << 12)
+#define S5P_CIGCTRL_SELCAM_MIPI_B (0 << 7)
+#define S5P_CIGCTRL_SELCAM_MIPI_A (1 << 7)
+#define S5P_CIGCTRL_SELCAM_MIPI_MASK (1 << 7)
+#define S5P_CIGCTRL_CAMIF_SELWB (1 << 6)
+#define S5P_CIGCTRL_INVPOLHSYNC (1 << 4)
+#define S5P_CIGCTRL_SELCAM_ITU (0 << 3)
+#define S5P_CIGCTRL_SELCAM_MIPI (1 << 3)
+#define S5P_CIGCTRL_PROGRESSIVE (0 << 0)
+#define S5P_CIGCTRL_INTERLACE (1 << 0)
+
+/* Window offset2 register */
+#define S5P_CIWDOFST_WINHOROFST2_MASK (0xfff << 16)
+#define S5P_CIWDOFST_WINVEROFST2_MASK (0xfff << 16)
+
+/* Target format register */
+#define S5P_CITRGFMT_INROT90 (1 << 31)
+#define S5P_CITRGFMT_OUTFORMAT_YCBCR420 (0 << 29)
+#define S5P_CITRGFMT_OUTFORMAT_YCBCR422 (1 << 29)
+#define S5P_CITRGFMT_OUTFORMAT_YCBCR422_1PLANE (2 << 29)
+#define S5P_CITRGFMT_OUTFORMAT_RGB (3 << 29)
+#define S5P_CITRGFMT_OUT_FMT_MASK (3 << 29)
+#define S5P_CITRGFMT_HSIZE_MASK (0xfff << 16)
+#define S5P_CITRGFMT_FLIP_SHIFT (14)
+#define S5P_CITRGFMT_FLIP_NORMAL (0 << 14)
+#define S5P_CITRGFMT_FLIP_X_MIRROR (1 << 14)
+#define S5P_CITRGFMT_FLIP_Y_MIRROR (2 << 14)
+#define S5P_CITRGFMT_FLIP_180 (3 << 14)
+#define S5P_CITRGFMT_FLIP_MASK (3 << 14)
+#define S5P_CITRGFMT_OUTROT90 (1 << 13)
+#define S5P_CITRGFMT_VSIZE_MASK (0xfff << 0)
+
+/* Output DMA control register */
+#define S5P_CIOCTRL_ORDER422_MASK (3 << 0)
+#define S5P_CIOCTRL_ORDER422_CRYCBY (0 << 0)
+#define S5P_CIOCTRL_ORDER422_YCRYCB (1 << 0)
+#define S5P_CIOCTRL_ORDER422_CBYCRY (2 << 0)
+#define S5P_CIOCTRL_ORDER422_YCBYCR (3 << 0)
+#define S5P_CIOCTRL_LASTIRQ_ENABLE (1 << 2)
+#define S5P_CIOCTRL_YCBCR_3PLANE (0 << 3)
+#define S5P_CIOCTRL_YCBCR_2PLANE (1 << 3)
+#define S5P_CIOCTRL_YCBCR_PLANE_MASK (1 << 3)
+#define S5P_CIOCTRL_ORDER2P_SHIFT (24)
+#define S5P_CIOCTRL_ORDER2P_MASK (3 << 24)
+#define S5P_CIOCTRL_ORDER422_2P_LSB_CRCB (0 << 24)
+
+
+/* Main scaler control register */
+#define S5P_CISCCTRL_SCALERBYPASS (1 << 31)
+#define S5P_CISCCTRL_SCALEUP_H (1 << 30)
+#define S5P_CISCCTRL_SCALEUP_V (1 << 29)
+#define S5P_CISCCTRL_CSCR2Y_NARROW (0 << 28)
+#define S5P_CISCCTRL_CSCR2Y_WIDE (1 << 28)
+#define S5P_CISCCTRL_CSCY2R_NARROW (0 << 27)
+#define S5P_CISCCTRL_CSCY2R_WIDE (1 << 27)
+#define S5P_CISCCTRL_LCDPATHEN_FIFO (1 << 26)
+#define S5P_CISCCTRL_PROGRESSIVE (0 << 25)
+#define S5P_CISCCTRL_INTERLACE (1 << 25)
+#define S5P_CISCCTRL_SCALERSTART (1 << 15)
+#define S5P_CISCCTRL_INRGB_FMT_RGB565 (0 << 13)
+#define S5P_CISCCTRL_INRGB_FMT_RGB666 (1 << 13)
+#define S5P_CISCCTRL_INRGB_FMT_RGB888 (2 << 13)
+#define S5P_CISCCTRL_INRGB_FMT_MASK (3 << 13)
+#define S5P_CISCCTRL_OUTRGB_FMT_RGB565 (0 << 11)
+#define S5P_CISCCTRL_OUTRGB_FMT_RGB666 (1 << 11)
+#define S5P_CISCCTRL_OUTRGB_FMT_RGB888 (2 << 11)
+#define S5P_CISCCTRL_OUTRGB_FMT_MASK (3 << 11)
+#define S5P_CISCCTRL_EXTRGB_NORMAL (0 << 10)
+#define S5P_CISCCTRL_EXTRGB_EXTENSION (1 << 10)
+#define S5P_CISCCTRL_ONE2ONE (1 << 9)
+
+/* Status register */
+#define S5P_CISTATUS_OVFIY (1 << 31)
+#define S5P_CISTATUS_OVFICB (1 << 30)
+#define S5P_CISTATUS_OVFICR (1 << 29)
+#define S5P_CISTATUS_VSYNC (1 << 28)
+#define S5P_CISTATUS_WINOFSTEN (1 << 25)
+#define S5P_CISTATUS_IMGCPTEN (1 << 22)
+#define S5P_CISTATUS_IMGCPTENSC (1 << 21)
+#define S5P_CISTATUS_VSYNC_A (1 << 20)
+#define S5P_CISTATUS_VSYNC_B (1 << 19)
+#define S5P_CISTATUS_OVRLB (1 << 18)
+#define S5P_CISTATUS_FRAMEEND (1 << 17)
+#define S5P_CISTATUS_LASTCAPTUREEND (1 << 16)
+#define S5P_CISTATUS_VVALID_A (1 << 15)
+#define S5P_CISTATUS_VVALID_B (1 << 14)
+
+/* Image capture enable register */
+#define S5P_CIIMGCPT_IMGCPTEN (1 << 31)
+#define S5P_CIIMGCPT_IMGCPTEN_SC (1 << 30)
+#define S5P_CIIMGCPT_CPT_FREN_ENABLE (1 << 25)
+#define S5P_CIIMGCPT_CPT_FRMOD_EN (0 << 18)
+#define S5P_CIIMGCPT_CPT_FRMOD_CNT (1 << 18)
+
+/* Image effects register */
+#define S5P_CIIMGEFF_IE_DISABLE (0 << 30)
+#define S5P_CIIMGEFF_IE_ENABLE (1 << 30)
+#define S5P_CIIMGEFF_IE_SC_BEFORE (0 << 29)
+#define S5P_CIIMGEFF_IE_SC_AFTER (1 << 29)
+#define S5P_CIIMGEFF_FIN_BYPASS (0 << 26)
+#define S5P_CIIMGEFF_FIN_ARBITRARY (1 << 26)
+#define S5P_CIIMGEFF_FIN_NEGATIVE (2 << 26)
+#define S5P_CIIMGEFF_FIN_ARTFREEZE (3 << 26)
+#define S5P_CIIMGEFF_FIN_EMBOSSING (4 << 26)
+#define S5P_CIIMGEFF_FIN_SILHOUETTE (5 << 26)
+#define S5P_CIIMGEFF_FIN_MASK (7 << 26)
+#define S5P_CIIMGEFF_PAT_CBCR_MASK ((0xff < 13) | (0xff < 0))
+
+/* Real input DMA size register */
+#define S5P_CIREAL_ISIZE_AUTOLOAD_ENABLE (1 << 31)
+#define S5P_CIREAL_ISIZE_ADDR_CH_DISABLE (1 << 30)
+
+/* Input DMA control register */
+#define S5P_MSCTRL_IN_BURST_COUNT_MASK (3 << 24)
+#define S5P_MSCTRL_2P_IN_ORDER_MASK (3 << 16)
+#define S5P_MSCTRL_2P_IN_ORDER_SHIFT (16)
+#define S5P_MSCTRL_C_INT_IN_3PLANE (0 << 15)
+#define S5P_MSCTRL_C_INT_IN_2PLANE (1 << 15)
+#define S5P_MSCTRL_C_INT_IN_MASK (1 << 15)
+#define S5P_MSCTRL_FLIP_SHIFT (13)
+#define S5P_MSCTRL_FLIP_MASK (3 << 13)
+#define S5P_MSCTRL_FLIP_NORMAL (0 << 13)
+#define S5P_MSCTRL_FLIP_X_MIRROR (1 << 13)
+#define S5P_MSCTRL_FLIP_Y_MIRROR (2 << 13)
+#define S5P_MSCTRL_FLIP_180 (3 << 13)
+#define S5P_MSCTRL_ORDER422_SHIFT (4)
+#define S5P_MSCTRL_ORDER422_CRYCBY (0 << 4)
+#define S5P_MSCTRL_ORDER422_YCRYCB (1 << 4)
+#define S5P_MSCTRL_ORDER422_CBYCRY (2 << 4)
+#define S5P_MSCTRL_ORDER422_YCBYCR (3 << 4)
+#define S5P_MSCTRL_ORDER422_MASK (3 << 4)
+#define S5P_MSCTRL_INPUT_EXTCAM (0 << 3)
+#define S5P_MSCTRL_INPUT_MEMORY (1 << 3)
+#define S5P_MSCTRL_INPUT_MASK (1 << 3)
+#define S5P_MSCTRL_INFORMAT_YCBCR420 (0 << 1)
+#define S5P_MSCTRL_INFORMAT_YCBCR422 (1 << 1)
+#define S5P_MSCTRL_INFORMAT_YCBCR422_1PLANE (2 << 1)
+#define S5P_MSCTRL_INFORMAT_RGB (3 << 1)
+#define S5P_MSCTRL_INFORMAT_MASK (3 << 1)
+#define S5P_MSCTRL_ENVID (1 << 0)
+
+/* DMA parameter register */
+#define S5P_CIDMAPARAM_R_MODE_64X32 (3 << 29)
+#define S5P_CIDMAPARAM_W_MODE_LINEAR (0 << 13)
+#define S5P_CIDMAPARAM_W_MODE_CONFTILE (1 << 13)
+#define S5P_CIDMAPARAM_W_MODE_64X32 (3 << 13)
+
+#endif /* REGS_FIMC_H_ */
new file mode 100644
@@ -0,0 +1,58 @@
+/* linux/arch/arm/plat-samsung/include/plat/fimc.h
+ *
+ * Platform header file for FIMC driver
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef FIMC_H_
+#define FIMC_H_
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <media/v4l2-subdev.h>
+
+struct s3c_fifo_link;
+
+extern struct platform_device s5p_device_fimc0;
+extern struct platform_device s5p_device_fimc1;
+extern struct platform_device s5p_device_fimc2;
+
+struct samsung_plat_fimc {
+/* Input and output rotator availability */
+#define S5P_FIMC_IN_ROT (1 << 0)
+#define S5P_FIMC_OUT_ROT (1 << 1)
+ u32 capability;
+ /* scaler input pixel size constraints */
+ u16 scaler_en_w;
+ u16 scaler_dis_w;
+ /* input rotator limits for (input) image pixel size */
+ u16 in_rot_en_h;
+ u16 in_rot_dis_w;
+ /* output rotator limits for (output) image pixel size */
+ u16 out_rot_en_w;
+ u16 out_rot_dis_w;
+ /* transfer of data in fifo mode is possible only to one framebuffer
+ window from each fimc entity */
+#define FIMC_MAX_FIFO_TARGETS 1
+#define FIMC_LCD_FIFO_TARGET 0
+ struct s3c_fifo_link *fifo_targets[FIMC_MAX_FIFO_TARGETS];
+};
+
+extern struct samsung_plat_fimc s5p_fimc0_default_data;
+extern struct samsung_plat_fimc s5p_fimc1_default_data;
+extern struct samsung_plat_fimc s5p_fimc2_default_data;
+
+extern void s5p_fimc0_set_platdata(struct samsung_plat_fimc *fimc);
+extern void s5p_fimc1_set_platdata(struct samsung_plat_fimc *fimc);
+extern void s5p_fimc2_set_platdata(struct samsung_plat_fimc *fimc);
+
+#endif /* FIMC_H_ */
+