@@ -47,11 +47,11 @@ static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
struct mantis_hwconfig *config = mantis->hwconfig;
int err = 0;
- gpio_set_bits(mantis, config->reset, 0);
+ mantis_gpio_set_bits(mantis, config->reset, 0);
msleep(100);
err = mantis_frontend_power(mantis, POWER_ON);
msleep(100);
- gpio_set_bits(mantis, config->reset, 1);
+ mantis_gpio_set_bits(mantis, config->reset, 1);
err = mantis_frontend_power(mantis, POWER_ON);
if (err == 0) {
@@ -201,7 +201,7 @@ int mantis_core_exit(struct mantis_pci *mantis)
}
/* Turn the given bit on or off. */
-void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
{
u32 cur;
@@ -47,15 +47,15 @@ int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power)
switch (power) {
case POWER_ON:
dprintk(MANTIS_DEBUG, 1, "Power ON");
- gpio_set_bits(mantis, config->power, POWER_ON);
+ mantis_gpio_set_bits(mantis, config->power, POWER_ON);
msleep(100);
- gpio_set_bits(mantis, config->power, POWER_ON);
+ mantis_gpio_set_bits(mantis, config->power, POWER_ON);
msleep(100);
break;
case POWER_OFF:
dprintk(MANTIS_DEBUG, 1, "Power OFF");
- gpio_set_bits(mantis, config->power, POWER_OFF);
+ mantis_gpio_set_bits(mantis, config->power, POWER_OFF);
msleep(100);
break;
@@ -73,13 +73,13 @@ void mantis_frontend_soft_reset(struct mantis_pci *mantis)
struct mantis_hwconfig *config = mantis->hwconfig;
dprintk(MANTIS_DEBUG, 1, "Frontend RESET");
- gpio_set_bits(mantis, config->reset, 0);
+ mantis_gpio_set_bits(mantis, config->reset, 0);
msleep(100);
- gpio_set_bits(mantis, config->reset, 0);
+ mantis_gpio_set_bits(mantis, config->reset, 0);
msleep(100);
- gpio_set_bits(mantis, config->reset, 1);
+ mantis_gpio_set_bits(mantis, config->reset, 1);
msleep(100);
- gpio_set_bits(mantis, config->reset, 1);
+ mantis_gpio_set_bits(mantis, config->reset, 1);
msleep(100);
return;
@@ -82,7 +82,7 @@ int mantis_get_mac(struct mantis_pci *mantis)
EXPORT_SYMBOL_GPL(mantis_get_mac);
/* Turn the given bit on or off. */
-void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
{
u32 cur;
@@ -97,7 +97,7 @@ void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
mmwrite(0x00, MANTIS_GPIF_DOUT);
}
-EXPORT_SYMBOL_GPL(gpio_set_bits);
+EXPORT_SYMBOL_GPL(mantis_gpio_set_bits);
int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl)
{
@@ -44,7 +44,7 @@ enum mantis_stream_control {
};
extern int mantis_get_mac(struct mantis_pci *mantis);
-extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
+extern void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
extern int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl);
@@ -50,13 +50,13 @@ int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
switch (voltage) {
case SEC_VOLTAGE_13:
dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
- gpio_set_bits(mantis, 13, 1);
- gpio_set_bits(mantis, 14, 0);
+ mantis_gpio_set_bits(mantis, 13, 1);
+ mantis_gpio_set_bits(mantis, 14, 0);
break;
case SEC_VOLTAGE_18:
dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
- gpio_set_bits(mantis, 13, 1);
- gpio_set_bits(mantis, 14, 1);
+ mantis_gpio_set_bits(mantis, 13, 1);
+ mantis_gpio_set_bits(mantis, 14, 1);
break;
case SEC_VOLTAGE_OFF:
dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
@@ -59,11 +59,11 @@ static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
struct mantis_hwconfig *config = mantis->hwconfig;
int err = 0;
- gpio_set_bits(mantis, config->reset, 0);
+ mantis_gpio_set_bits(mantis, config->reset, 0);
msleep(100);
err = mantis_frontend_power(mantis, POWER_ON);
msleep(100);
- gpio_set_bits(mantis, config->reset, 1);
+ mantis_gpio_set_bits(mantis, config->reset, 1);
if (err == 0) {
msleep(250);