diff mbox

[v10,4/4] Documentation: v4l: Add hw_seek spacing and two TUNER_RDS_CAP flags.

Message ID 1285329332-4380-5-git-send-email-matti.j.aaltonen@nokia.com (mailing list archive)
State Superseded
Headers show

Commit Message

Matti Aaltonen Sept. 24, 2010, 11:55 a.m. UTC
None
diff mbox

Patch

diff --git a/Documentation/DocBook/v4l/dev-rds.xml b/Documentation/DocBook/v4l/dev-rds.xml
index 0869d70..e7be392 100644
--- a/Documentation/DocBook/v4l/dev-rds.xml
+++ b/Documentation/DocBook/v4l/dev-rds.xml
@@ -28,6 +28,10 @@  returned by the &VIDIOC-QUERYCAP; ioctl.
 Any tuner that supports RDS will set the
 <constant>V4L2_TUNER_CAP_RDS</constant> flag in the <structfield>capability</structfield>
 field of &v4l2-tuner;.
+If the driver only passes RDS blocks without interpreting the data
+the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be set. If the
+tuner is capable of handling RDS entities like program identication codes and radio
+text the flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> should be set.
 Whether an RDS signal is present can be detected by looking at
 the <structfield>rxsubchans</structfield> field of &v4l2-tuner;: the
 <constant>V4L2_TUNER_SUB_RDS</constant> will be set if RDS data was detected.</para>
@@ -40,7 +44,11 @@  Any modulator that supports RDS will set the
 <constant>V4L2_TUNER_CAP_RDS</constant> flag in the <structfield>capability</structfield>
 field of &v4l2-modulator;.
 In order to enable the RDS transmission one must set the <constant>V4L2_TUNER_SUB_RDS</constant>
-bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;.</para>
+bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;.
+If the driver only passes RDS blocks without interpreting the data
+the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be set. If the
+tuner is capable of handling RDS entities like program identication codes and radio
+text the flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> should be set.</para>
 
   </section>
 
diff --git a/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml
index 14b3ec7..c30dcc4 100644
--- a/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml
+++ b/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml
@@ -51,7 +51,8 @@ 
 
     <para>Start a hardware frequency seek from the current frequency.
 To do this applications initialize the <structfield>tuner</structfield>,
-<structfield>type</structfield>, <structfield>seek_upward</structfield> and
+<structfield>type</structfield>, <structfield>seek_upward</structfield>,
+<structfield>spacing</structfield> and
 <structfield>wrap_around</structfield> fields, and zero out the
 <structfield>reserved</structfield> array of a &v4l2-hw-freq-seek; and
 call the <constant>VIDIOC_S_HW_FREQ_SEEK</constant> ioctl with a pointer
@@ -89,7 +90,12 @@  field and the &v4l2-tuner; <structfield>index</structfield> field.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
-	    <entry><structfield>reserved</structfield>[8]</entry>
+	    <entry><structfield>spacing</structfield></entry>
+	    <entry>If non-zero, defines the hardware seek resolution in Hz. The driver selects the nearest value that is supported by the device. If spacing is zero a reasonable default value is used.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>reserved</structfield>[7]</entry>
 	    <entry>Reserved for future extensions. Drivers and
 	    applications must set the array to zero.</entry>
 	  </row>