@@ -107,7 +107,7 @@ static irqreturn_t hopper_irq_handler(int irq, void *dev_id)
}
if (stat & MANTIS_INT_IRQ1) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
- schedule_work(&mantis->uart_work);
+ tasklet_schedule(&mantis->uart_tasklet);
}
if (stat & MANTIS_INT_OCERR) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
@@ -49,6 +49,7 @@
#include "mantis_pci.h"
#include "mantis_i2c.h"
#include "mantis_reg.h"
+#include "mantis_input.h"
static unsigned int verbose;
module_param(verbose, int, 0644);
@@ -115,7 +116,7 @@ static irqreturn_t mantis_irq_handler(int irq, void *dev_id)
}
if (stat & MANTIS_INT_IRQ1) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
- schedule_work(&mantis->uart_work);
+ tasklet_schedule(&mantis->uart_tasklet);
}
if (stat & MANTIS_INT_OCERR) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
@@ -180,6 +181,14 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_dev
config->irq_handler = &mantis_irq_handler;
mantis->hwconfig = config;
+ if (mantis->hwconfig->config_init != NULL) {
+ dprintk(MANTIS_ERROR, 1,
+ "Mantis-subsystem: vendor:0x%04x, device:0x%04x\n",
+ mantis->pdev->subsystem_vendor,
+ mantis->pdev->subsystem_device);
+ mantis->hwconfig->config_init(mantis);
+ }
+
err = mantis_pci_init(mantis);
if (err) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
@@ -215,21 +224,32 @@ static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_dev
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
goto fail4;
}
+
+ err = mantis_input_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis INPUT initialization failed <%d>", err);
+ goto fail6;
+ }
+
+
err = mantis_uart_init(mantis);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err);
- goto fail6;
+ goto fail7;
}
devs++;
return err;
-
+fail7:
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err);
mantis_uart_exit(mantis);
fail6:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis INPUT exit! <%d>", err);
+ mantis_input_exit(mantis);
+
fail4:
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
mantis_dma_exit(mantis);
@@ -257,6 +277,7 @@ static void __devexit mantis_pci_remove(struct pci_dev *pdev)
if (mantis) {
mantis_uart_exit(mantis);
+ mantis_input_exit(mantis);
mantis_dvb_exit(mantis);
mantis_dma_exit(mantis);
mantis_i2c_exit(mantis);
@@ -23,6 +23,9 @@
#include <linux/mutex.h>
#include <linux/workqueue.h>
+#include <linux/input.h>
+#include <linux/spinlock.h>
+#include <media/rc-core.h>
#include "mantis_uart.h"
@@ -91,8 +94,12 @@ struct mantis_hwconfig {
enum mantis_parity parity;
u32 bytes;
+ char *ir_codes;
+ void (*ir_work)(struct mantis_pci *mantis, u8 buf[]);
+
irqreturn_t (*irq_handler)(int irq, void *dev_id);
int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe);
+ void (*config_init)(struct mantis_pci *mantis);
u8 power;
u8 reset;
@@ -100,6 +107,12 @@ struct mantis_hwconfig {
enum mantis_i2c_mode i2c_mode;
};
+struct mantis_ir {
+ struct rc_dev *rc_dev;
+ char rc_name[80];
+ char rc_phys[80];
+};
+
struct mantis_pci {
unsigned int verbose;
@@ -167,13 +180,11 @@ struct mantis_pci {
struct mantis_ca *mantis_ca;
- wait_queue_head_t uart_wq;
- struct work_struct uart_work;
- spinlock_t uart_lock;
+ struct tasklet_struct uart_tasklet;
+
+ /* Remote Control handling */
+ struct mantis_ir rc;
- struct rc_dev *rc;
- char input_name[80];
- char input_phys[80];
};
#define MANTIS_HIF_STATUS (mantis->gpio_status)
@@ -18,7 +18,6 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <media/rc-core.h>
#include <linux/pci.h>
#include "dmxdev.h"
@@ -28,132 +27,87 @@
#include "dvb_net.h"
#include "mantis_common.h"
+#include "mantis_input.h"
#include "mantis_reg.h"
#include "mantis_uart.h"
#define MODULE_NAME "mantis_core"
-#define RC_MAP_MANTIS "rc-mantis"
-
-static struct rc_map_table mantis_ir_table[] = {
- { 0x29, KEY_POWER },
- { 0x28, KEY_FAVORITES },
- { 0x30, KEY_TEXT },
- { 0x17, KEY_INFO }, /* Preview */
- { 0x23, KEY_EPG },
- { 0x3b, KEY_F22 }, /* Record List */
- { 0x3c, KEY_1 },
- { 0x3e, KEY_2 },
- { 0x39, KEY_3 },
- { 0x36, KEY_4 },
- { 0x22, KEY_5 },
- { 0x20, KEY_6 },
- { 0x32, KEY_7 },
- { 0x26, KEY_8 },
- { 0x24, KEY_9 },
- { 0x2a, KEY_0 },
-
- { 0x33, KEY_CANCEL },
- { 0x2c, KEY_BACK },
- { 0x15, KEY_CLEAR },
- { 0x3f, KEY_TAB },
- { 0x10, KEY_ENTER },
- { 0x14, KEY_UP },
- { 0x0d, KEY_RIGHT },
- { 0x0e, KEY_DOWN },
- { 0x11, KEY_LEFT },
-
- { 0x21, KEY_VOLUMEUP },
- { 0x35, KEY_VOLUMEDOWN },
- { 0x3d, KEY_CHANNELDOWN },
- { 0x3a, KEY_CHANNELUP },
- { 0x2e, KEY_RECORD },
- { 0x2b, KEY_PLAY },
- { 0x13, KEY_PAUSE },
- { 0x25, KEY_STOP },
-
- { 0x1f, KEY_REWIND },
- { 0x2d, KEY_FASTFORWARD },
- { 0x1e, KEY_PREVIOUS }, /* Replay |< */
- { 0x1d, KEY_NEXT }, /* Skip >| */
-
- { 0x0b, KEY_CAMERA }, /* Capture */
- { 0x0f, KEY_LANGUAGE }, /* SAP */
- { 0x18, KEY_MODE }, /* PIP */
- { 0x12, KEY_ZOOM }, /* Full screen */
- { 0x1c, KEY_SUBTITLE },
- { 0x2f, KEY_MUTE },
- { 0x16, KEY_F20 }, /* L/R */
- { 0x38, KEY_F21 }, /* Hibernate */
-
- { 0x37, KEY_SWITCHVIDEOMODE }, /* A/V */
- { 0x31, KEY_AGAIN }, /* Recall */
- { 0x1a, KEY_KPPLUS }, /* Zoom+ */
- { 0x19, KEY_KPMINUS }, /* Zoom- */
- { 0x27, KEY_RED },
- { 0x0C, KEY_GREEN },
- { 0x01, KEY_YELLOW },
- { 0x00, KEY_BLUE },
-};
-
-static struct rc_map_list ir_mantis_map = {
- .map = {
- .scan = mantis_ir_table,
- .size = ARRAY_SIZE(mantis_ir_table),
- .rc_type = RC_TYPE_UNKNOWN,
- .name = RC_MAP_MANTIS,
- }
-};
int mantis_input_init(struct mantis_pci *mantis)
{
- struct rc_dev *dev;
+ struct rc_dev *rc_dev;
+ struct mantis_ir *mir = &mantis->rc;
int err;
- err = rc_map_register(&ir_mantis_map);
- if (err)
- goto out;
- dev = rc_allocate_device();
- if (!dev) {
- dprintk(MANTIS_ERROR, 1, "Remote device allocation failed");
- err = -ENOMEM;
- goto out_map;
+ if (!mantis->hwconfig->ir_codes) {
+ dprintk(MANTIS_DEBUG, 1, "No RC codes available");
+ return 0;
}
- sprintf(mantis->input_name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
- sprintf(mantis->input_phys, "pci-%s/ir0", pci_name(mantis->pdev));
-
- dev->input_name = mantis->input_name;
- dev->input_phys = mantis->input_phys;
- dev->input_id.bustype = BUS_PCI;
- dev->input_id.vendor = mantis->vendor_id;
- dev->input_id.product = mantis->device_id;
- dev->input_id.version = 1;
- dev->driver_name = MODULE_NAME;
- dev->map_name = RC_MAP_MANTIS;
- dev->dev.parent = &mantis->pdev->dev;
+ rc_dev = rc_allocate_device();
+ if (!rc_dev) {
+ dprintk(MANTIS_ERROR, 1, "Input device allocate failed");
+ return -ENOMEM;
+ }
- err = rc_register_device(dev);
+ mir->rc_dev = rc_dev;
+
+ snprintf(mir->rc_name, sizeof(mir->rc_name),
+ "Mantis %s IR Receiver", mantis->hwconfig->model_name);
+ snprintf(mir->rc_phys, sizeof(mir->rc_phys),
+ "pci-%s/ir0", pci_name(mantis->pdev));
+
+ dprintk(MANTIS_ERROR, 1, "Input device %s PCI: %s",
+ mir->rc_name, mir->rc_phys);
+
+ rc_dev->input_name = mir->rc_name;
+ rc_dev->input_phys = mir->rc_phys;
+ rc_dev->input_id.bustype = BUS_PCI;
+ rc_dev->input_id.vendor = mantis->vendor_id;
+ rc_dev->input_id.product = mantis->device_id;
+ rc_dev->input_id.version = 1;
+ rc_dev->priv = mir;
+ rc_dev->driver_name = MODULE_NAME;
+ rc_dev->driver_type = RC_DRIVER_SCANCODE;
+ rc_dev->map_name = mantis->hwconfig->ir_codes;
+ rc_dev->allowed_protos = RC_TYPE_UNKNOWN;
+
+ err = rc_register_device(rc_dev);
if (err) {
dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err);
- goto out_dev;
+ mir->rc_dev = NULL;
+ rc_free_device(rc_dev);
+ return -ENODEV;
}
- mantis->rc = dev;
+ dprintk(MANTIS_INFO, 1, "Input device registered");
return 0;
-
-out_dev:
- rc_free_device(dev);
-out_map:
- rc_map_unregister(&ir_mantis_map);
-out:
- return err;
}
+EXPORT_SYMBOL_GPL(mantis_input_init);
-int mantis_exit(struct mantis_pci *mantis)
+void mantis_input_exit(struct mantis_pci *mantis)
{
- rc_unregister_device(mantis->rc);
- rc_map_unregister(&ir_mantis_map);
- return 0;
+ struct rc_dev *rc_dev = mantis->rc.rc_dev;
+
+ if (!rc_dev)
+ return;
+
+ rc_unregister_device(rc_dev);
+ mantis->rc.rc_dev = NULL;
}
+EXPORT_SYMBOL_GPL(mantis_input_exit);
+
+void mantis_input_process(struct mantis_pci *mantis, u8 buf[])
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ struct mantis_ir *mir = &mantis->rc;
+ int i;
+ for (i = 0; i < (config->bytes + 1); i++) {
+ dprintk(MANTIS_ERROR, 0, "RC Input Sendkey:%d <%02x>\n", i, buf[i]);
+ rc_keydown(mir->rc_dev, buf[i], 0);
+ }
+
+}
+EXPORT_SYMBOL_GPL(mantis_input_process);
new file mode 100644
@@ -0,0 +1,28 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MANTIS_INPUT_H
+#define __MANTIS_INPUT_H
+
+extern int mantis_input_init(struct mantis_pci *mantis);
+extern void mantis_input_exit(struct mantis_pci *mantis);
+extern void mantis_input_process(struct mantis_pci *mantis, u8 buf[]);
+
+#endif /* __MANTIS_INPUT_H */
@@ -19,7 +19,6 @@
*/
#include <linux/kernel.h>
-#include <linux/spinlock.h>
#include <linux/signal.h>
#include <linux/sched.h>
@@ -34,6 +33,7 @@
#include "mantis_common.h"
#include "mantis_reg.h"
#include "mantis_uart.h"
+#include "mantis_input.h"
struct mantis_uart_params {
enum mantis_baud baud_rate;
@@ -90,9 +90,9 @@ int mantis_uart_read(struct mantis_pci *mantis, u8 *data)
return 0;
}
-static void mantis_uart_work(struct work_struct *work)
+void mantis_uart_work(unsigned long data)
{
- struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
+ struct mantis_pci *mantis = (struct mantis_pci *) data;
struct mantis_hwconfig *config = mantis->hwconfig;
u8 buf[16];
int i;
@@ -101,8 +101,10 @@ static void mantis_uart_work(struct work_struct *work)
for (i = 0; i < (config->bytes + 1); i++)
dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]);
-
dprintk(MANTIS_DEBUG, 0, "\n");
+
+ if (config->ir_work)
+ config->ir_work(mantis, buf);
}
static int mantis_uart_setup(struct mantis_pci *mantis,
@@ -151,10 +153,8 @@ int mantis_uart_init(struct mantis_pci *mantis)
rates[params.baud_rate].string,
parity[params.parity].string);
- init_waitqueue_head(&mantis->uart_wq);
- spin_lock_init(&mantis->uart_lock);
-
- INIT_WORK(&mantis->uart_work, mantis_uart_work);
+ tasklet_init(&mantis->uart_tasklet, mantis_uart_work,
+ (unsigned long) mantis);
/* disable interrupt */
mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
@@ -171,7 +171,6 @@ int mantis_uart_init(struct mantis_pci *mantis)
mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK);
mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
- schedule_work(&mantis->uart_work);
dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");
return 0;
@@ -182,6 +181,5 @@ void mantis_uart_exit(struct mantis_pci *mantis)
{
/* disable interrupt */
mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
- flush_work_sync(&mantis->uart_work);
}
EXPORT_SYMBOL_GPL(mantis_uart_exit);
@@ -21,6 +21,8 @@
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
+#include <linux/pci.h>
+
#include "dmxdev.h"
#include "dvbdev.h"
@@ -29,6 +31,7 @@
#include "dvb_net.h"
#include "mantis_common.h"
+#include "mantis_input.h"
#include "mantis_ioc.h"
#include "mantis_dvb.h"
#include "mantis_vp1041.h"
@@ -343,6 +346,20 @@ static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
return 0;
}
+static void vp1041_config_init(struct mantis_pci *mantis)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ switch (mantis->pdev->subsystem_vendor) {
+ case TWINHAN_TECHNOLOGIES:
+ if (mantis->pdev->subsystem_device == MANTIS_VP_1041_DVB_S2)
+ config->ir_codes = RC_MAP_TWINHAN_DTV_CAB_CI;
+ break;
+ default:
+ config->ir_codes = RC_MAP_TERRATEC_CINERGY_S2_HD;
+ }
+}
+
struct mantis_hwconfig vp1041_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
@@ -352,6 +369,9 @@ struct mantis_hwconfig vp1041_config = {
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
+ .ir_work = mantis_input_process,
+
+ .config_init = vp1041_config_init,
.frontend_init = vp1041_frontend_init,
.power = GPIF_A12,
.reset = GPIF_A13,
@@ -30,6 +30,7 @@
#include "tda1002x.h"
#include "mantis_common.h"
+#include "mantis_input.h"
#include "mantis_ioc.h"
#include "mantis_dvb.h"
#include "mantis_vp2033.h"
@@ -181,6 +182,9 @@ struct mantis_hwconfig vp2033_config = {
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
+ .ir_codes = RC_MAP_TWINHAN_DTV_CAB_CI,
+ .ir_work = mantis_input_process,
+
.frontend_init = vp2033_frontend_init,
.power = GPIF_A12,
.reset = GPIF_A13,
@@ -30,6 +30,7 @@
#include "tda1002x.h"
#include "mantis_common.h"
+#include "mantis_input.h"
#include "mantis_ioc.h"
#include "mantis_dvb.h"
#include "mantis_vp2040.h"
@@ -180,6 +181,9 @@ struct mantis_hwconfig vp2040_config = {
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
+ .ir_codes = RC_MAP_TERRATEC_CINERGY_C_PCI,
+ .ir_work = mantis_input_process,
+
.frontend_init = vp2040_frontend_init,
.power = GPIF_A12,
.reset = GPIF_A13,
@@ -73,6 +73,8 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
rc-streamzap.o \
rc-tbs-nec.o \
rc-technisat-usb2.o \
+ rc-terratec-cinergy-c-pci.o \
+ rc-terratec-cinergy-s2-hd.o \
rc-terratec-cinergy-xs.o \
rc-terratec-slim.o \
rc-terratec-slim-2.o \
@@ -81,6 +83,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
rc-total-media-in-hand.o \
rc-trekstor.o \
rc-tt-1500.o \
+ rc-twinhan-dtv-cab-ci.o \
rc-twinhan1027.o \
rc-videomate-m1f.o \
rc-videomate-s350.o \
new file mode 100644
@@ -0,0 +1,85 @@
+/* keytable for Terratec Cinergy C PCI Remote Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table terratec_cinergy_c_pci[] = {
+ { 0x3e, KEY_POWER},
+ { 0x3d, KEY_1},
+ { 0x3c, KEY_2},
+ { 0x3b, KEY_3},
+ { 0x3a, KEY_4},
+ { 0x39, KEY_5},
+ { 0x38, KEY_6},
+ { 0x37, KEY_7},
+ { 0x36, KEY_8},
+ { 0x35, KEY_9},
+ { 0x34, KEY_VIDEO_NEXT}, /* AV */
+ { 0x33, KEY_0},
+ { 0x32, KEY_REFRESH},
+ { 0x30, KEY_EPG},
+ { 0x2f, KEY_UP},
+ { 0x2e, KEY_LEFT},
+ { 0x2d, KEY_OK},
+ { 0x2c, KEY_RIGHT},
+ { 0x2b, KEY_DOWN},
+ { 0x29, KEY_INFO},
+ { 0x28, KEY_RED},
+ { 0x27, KEY_GREEN},
+ { 0x26, KEY_YELLOW},
+ { 0x25, KEY_BLUE},
+ { 0x24, KEY_CHANNELUP},
+ { 0x23, KEY_VOLUMEUP},
+ { 0x22, KEY_MUTE},
+ { 0x21, KEY_VOLUMEDOWN},
+ { 0x20, KEY_CHANNELDOWN},
+ { 0x1f, KEY_PAUSE},
+ { 0x1e, KEY_HOME},
+ { 0x1d, KEY_MENU}, /* DVD Menu */
+ { 0x1c, KEY_SUBTITLE},
+ { 0x1b, KEY_TEXT}, /* Teletext */
+ { 0x1a, KEY_DELETE},
+ { 0x19, KEY_TV},
+ { 0x18, KEY_DVD},
+ { 0x17, KEY_STOP},
+ { 0x16, KEY_VIDEO},
+ { 0x15, KEY_AUDIO}, /* Music */
+ { 0x14, KEY_SCREEN}, /* Pic */
+ { 0x13, KEY_PLAY},
+ { 0x12, KEY_BACK},
+ { 0x11, KEY_REWIND},
+ { 0x10, KEY_FASTFORWARD},
+ { 0x0b, KEY_PREVIOUS},
+ { 0x07, KEY_RECORD},
+ { 0x03, KEY_NEXT},
+
+};
+
+static struct rc_map_list terratec_cinergy_c_pci_map = {
+ .map = {
+ .scan = terratec_cinergy_c_pci,
+ .size = ARRAY_SIZE(terratec_cinergy_c_pci),
+ .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_TERRATEC_CINERGY_C_PCI,
+ }
+};
+
+static int __init init_rc_map_terratec_cinergy_c_pci(void)
+{
+ return rc_map_register(&terratec_cinergy_c_pci_map);
+}
+
+static void __exit exit_rc_map_terratec_cinergy_c_pci(void)
+{
+ rc_map_unregister(&terratec_cinergy_c_pci_map);
+}
+
+module_init(init_rc_map_terratec_cinergy_c_pci)
+module_exit(exit_rc_map_terratec_cinergy_c_pci)
+
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,85 @@
+/* keytable for Terratec Cinergy S2 HD Remote Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table terratec_cinergy_s2_hd[] = {
+ { 0x03, KEY_NEXT}, /* >| */
+ { 0x07, KEY_RECORD},
+ { 0x0b, KEY_PREVIOUS}, /* |< */
+ { 0x10, KEY_FASTFORWARD}, /* >> */
+ { 0x11, KEY_REWIND}, /* << */
+ { 0x12, KEY_ESC}, /* Back */
+ { 0x13, KEY_PLAY},
+ { 0x14, KEY_IMAGES},
+ { 0x15, KEY_AUDIO},
+ { 0x16, KEY_MEDIA}, /* Video-Menu */
+ { 0x17, KEY_STOP},
+ { 0x18, KEY_DVD},
+ { 0x19, KEY_TV},
+ { 0x1a, KEY_DELETE},
+ { 0x1b, KEY_TEXT},
+ { 0x1c, KEY_SUBTITLE},
+ { 0x1d, KEY_MENU}, /* DVD-Menu */
+ { 0x1e, KEY_HOME},
+ { 0x1f, KEY_PAUSE},
+ { 0x20, KEY_CHANNELDOWN},
+ { 0x21, KEY_VOLUMEDOWN},
+ { 0x22, KEY_MUTE},
+ { 0x23, KEY_VOLUMEUP},
+ { 0x24, KEY_CHANNELUP},
+ { 0x25, KEY_BLUE},
+ { 0x26, KEY_YELLOW},
+ { 0x27, KEY_GREEN},
+ { 0x28, KEY_RED},
+ { 0x29, KEY_INFO},
+ { 0x2b, KEY_DOWN},
+ { 0x2c, KEY_RIGHT},
+ { 0x2d, KEY_OK},
+ { 0x2e, KEY_LEFT},
+ { 0x2f, KEY_UP},
+ { 0x30, KEY_EPG},
+ { 0x32, KEY_VIDEO}, /* A<=>B */
+ { 0x33, KEY_0},
+ { 0x34, KEY_VCR}, /* AV */
+ { 0x35, KEY_9},
+ { 0x36, KEY_8},
+ { 0x37, KEY_7},
+ { 0x38, KEY_6},
+ { 0x39, KEY_5},
+ { 0x3a, KEY_4},
+ { 0x3b, KEY_3},
+ { 0x3c, KEY_2},
+ { 0x3d, KEY_1},
+ { 0x3e, KEY_POWER},
+
+};
+
+static struct rc_map_list terratec_cinergy_s2_hd_map = {
+ .map = {
+ .scan = terratec_cinergy_s2_hd,
+ .size = ARRAY_SIZE(terratec_cinergy_s2_hd),
+ .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_TERRATEC_CINERGY_S2_HD,
+ }
+};
+
+static int __init init_rc_map_terratec_cinergy_s2_hd(void)
+{
+ return rc_map_register(&terratec_cinergy_s2_hd_map);
+}
+
+static void __exit exit_rc_map_terratec_cinergy_s2_hd(void)
+{
+ rc_map_unregister(&terratec_cinergy_s2_hd_map);
+}
+
+module_init(init_rc_map_terratec_cinergy_s2_hd)
+module_exit(exit_rc_map_terratec_cinergy_s2_hd)
+
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,95 @@
+/* keytable for Twinhan DTV CAB CI Remote Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table twinhan_dtv_cab_ci[] = {
+ { 0x29, KEY_POWER},
+ { 0x28, KEY_FAVORITES},
+ { 0x30, KEY_TEXT},
+ { 0x17, KEY_INFO}, /* Preview */
+ { 0x23, KEY_EPG},
+ { 0x3b, KEY_F22}, /* Record List */
+
+ { 0x3c, KEY_1},
+ { 0x3e, KEY_2},
+ { 0x39, KEY_3},
+ { 0x36, KEY_4},
+ { 0x22, KEY_5},
+ { 0x20, KEY_6},
+ { 0x32, KEY_7},
+ { 0x26, KEY_8},
+ { 0x24, KEY_9},
+ { 0x2a, KEY_0},
+
+ { 0x33, KEY_CANCEL},
+ { 0x2c, KEY_BACK},
+ { 0x15, KEY_CLEAR},
+ { 0x3f, KEY_TAB},
+ { 0x10, KEY_ENTER},
+ { 0x14, KEY_UP},
+ { 0x0d, KEY_RIGHT},
+ { 0x0e, KEY_DOWN},
+ { 0x11, KEY_LEFT},
+
+ { 0x21, KEY_VOLUMEUP},
+ { 0x35, KEY_VOLUMEDOWN},
+ { 0x3d, KEY_CHANNELDOWN},
+ { 0x3a, KEY_CHANNELUP},
+ { 0x2e, KEY_RECORD},
+ { 0x2b, KEY_PLAY},
+ { 0x13, KEY_PAUSE},
+ { 0x25, KEY_STOP},
+
+ { 0x1f, KEY_REWIND},
+ { 0x2d, KEY_FASTFORWARD},
+ { 0x1e, KEY_PREVIOUS}, /* Replay |< */
+ { 0x1d, KEY_NEXT}, /* Skip >| */
+
+ { 0x0b, KEY_CAMERA}, /* Capture */
+ { 0x0f, KEY_LANGUAGE}, /* SAP */
+ { 0x18, KEY_MODE}, /* PIP */
+ { 0x12, KEY_ZOOM}, /* Full screen */
+ { 0x1c, KEY_SUBTITLE},
+ { 0x2f, KEY_MUTE},
+ { 0x16, KEY_F20}, /* L/R */
+ { 0x38, KEY_F21}, /* Hibernate */
+
+ { 0x37, KEY_SWITCHVIDEOMODE}, /* A/V */
+ { 0x31, KEY_AGAIN}, /* Recall */
+ { 0x1a, KEY_KPPLUS}, /* Zoom+ */
+ { 0x19, KEY_KPMINUS}, /* Zoom- */
+ { 0x27, KEY_RED},
+ { 0x0C, KEY_GREEN},
+ { 0x01, KEY_YELLOW},
+ { 0x00, KEY_BLUE},
+};
+
+static struct rc_map_list twinhan_dtv_cab_ci_map = {
+ .map = {
+ .scan = twinhan_dtv_cab_ci,
+ .size = ARRAY_SIZE(twinhan_dtv_cab_ci),
+ .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_TWINHAN_DTV_CAB_CI,
+ }
+};
+
+static int __init init_rc_map_twinhan_dtv_cab_ci(void)
+{
+ return rc_map_register(&twinhan_dtv_cab_ci_map);
+}
+
+static void __exit exit_rc_map_twinhan_dtv_cab_ci(void)
+{
+ rc_map_unregister(&twinhan_dtv_cab_ci_map);
+}
+
+module_init(init_rc_map_twinhan_dtv_cab_ci)
+module_exit(exit_rc_map_twinhan_dtv_cab_ci)
+
+MODULE_LICENSE("GPL");
@@ -132,6 +132,8 @@ void rc_map_init(void);
#define RC_MAP_STREAMZAP "rc-streamzap"
#define RC_MAP_TBS_NEC "rc-tbs-nec"
#define RC_MAP_TECHNISAT_USB2 "rc-technisat-usb2"
+#define RC_MAP_TERRATEC_CINERGY_C_PCI "rc-terratec-cinergy-c-pci"
+#define RC_MAP_TERRATEC_CINERGY_S2_HD "rc-terratec-cinergy-s2-hd"
#define RC_MAP_TERRATEC_CINERGY_XS "rc-terratec-cinergy-xs"
#define RC_MAP_TERRATEC_SLIM "rc-terratec-slim"
#define RC_MAP_TERRATEC_SLIM_2 "rc-terratec-slim-2"
@@ -140,6 +142,7 @@ void rc_map_init(void);
#define RC_MAP_TOTAL_MEDIA_IN_HAND "rc-total-media-in-hand"
#define RC_MAP_TREKSTOR "rc-trekstor"
#define RC_MAP_TT_1500 "rc-tt-1500"
+#define RC_MAP_TWINHAN_DTV_CAB_CI "rc-twinhan-dtv-cab-ci"
#define RC_MAP_TWINHAN_VP1027_DVBS "rc-twinhan1027"
#define RC_MAP_VIDEOMATE_M1F "rc-videomate-m1f"
#define RC_MAP_VIDEOMATE_S350 "rc-videomate-s350"
Signed-off-by: Christoph Pinkl <christoph.pinkl@gmail.com> --- drivers/media/dvb/mantis/hopper_cards.c | 2 +- drivers/media/dvb/mantis/mantis_cards.c | 27 +++- drivers/media/dvb/mantis/mantis_common.h | 23 ++- drivers/media/dvb/mantis/mantis_input.c | 168 +++++++------------- drivers/media/dvb/mantis/mantis_input.h | 28 ++++ drivers/media/dvb/mantis/mantis_uart.c | 18 +-- drivers/media/dvb/mantis/mantis_vp1041.c | 20 +++ drivers/media/dvb/mantis/mantis_vp2033.c | 4 + drivers/media/dvb/mantis/mantis_vp2040.c | 4 + drivers/media/rc/keymaps/Makefile | 3 + .../media/rc/keymaps/rc-terratec-cinergy-c-pci.c | 85 ++++++++++ .../media/rc/keymaps/rc-terratec-cinergy-s2-hd.c | 85 ++++++++++ drivers/media/rc/keymaps/rc-twinhan-dtv-cab-ci.c | 95 +++++++++++ include/media/rc-map.h | 3 + 14 files changed, 438 insertions(+), 127 deletions(-) create mode 100644 drivers/media/dvb/mantis/mantis_input.h create mode 100644 drivers/media/rc/keymaps/rc-terratec-cinergy-c-pci.c create mode 100644 drivers/media/rc/keymaps/rc-terratec-cinergy-s2-hd.c create mode 100644 drivers/media/rc/keymaps/rc-twinhan-dtv-cab-ci.c