@@ -499,31 +499,6 @@ static int rj54n1_s_stream(struct v4l2_subdev *sd, int enable)
return reg_set(client, RJ54N1_STILL_CONTROL, (!enable) << 7, 0x80);
}
-static int rj54n1_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- /* Figures 2.5-1 to 2.5-3 - default falling pixclk edge */
-
- if (flags & SOCAM_PCLK_SAMPLE_RISING)
- return reg_write(client, RJ54N1_OUT_SIGPO, 1 << 4);
- else
- return reg_write(client, RJ54N1_OUT_SIGPO, 0);
-}
-
-static unsigned long rj54n1_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- const unsigned long flags =
- SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
- SOCAM_MASTER | SOCAM_DATAWIDTH_8 |
- SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
- SOCAM_DATA_ACTIVE_HIGH;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
static int rj54n1_set_rect(struct i2c_client *client,
u16 reg_x, u16 reg_y, u16 reg_xy,
u32 width, u32 height)
@@ -1240,8 +1215,6 @@ static const struct v4l2_queryctrl rj54n1_controls[] = {
};
static struct soc_camera_ops rj54n1_ops = {
- .set_bus_param = rj54n1_set_bus_param,
- .query_bus_param = rj54n1_query_bus_param,
.controls = rj54n1_controls,
.num_controls = ARRAY_SIZE(rj54n1_controls),
};
Now that all soc-camera hosts have been ported to use V4L2 subdevice mediabus-config operations and soc-camera client bus-parameter operations have been made optional, they can be removed. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/rj54n1cb0c.c | 27 --------------------------- 1 files changed, 0 insertions(+), 27 deletions(-)