@@ -114,6 +114,7 @@ struct mx3_camera_dev {
struct list_head capture;
spinlock_t lock; /* Protects video buffer lists */
struct mx3_camera_buffer *active;
+ size_t buf_total;
struct vb2_alloc_ctx *alloc_ctx;
enum v4l2_field field;
int sequence;
@@ -198,73 +199,44 @@ static int mx3_videobuf_setup(struct vb2_queue *vq,
struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct mx3_camera_dev *mx3_cam = ici->priv;
- int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
- icd->current_fmt->host_fmt);
-
- if (bytes_per_line < 0)
- return bytes_per_line;
+ int bytes_per_line;
+ unsigned int height;
if (!mx3_cam->idmac_channel[0])
return -EINVAL;
- *num_planes = 1;
-
- mx3_cam->sequence = 0;
- sizes[0] = bytes_per_line * icd->user_height;
- alloc_ctxs[0] = mx3_cam->alloc_ctx;
-
- if (!*count)
- *count = 32;
-
- if (sizes[0] * *count > MAX_VIDEO_MEM * 1024 * 1024)
- *count = MAX_VIDEO_MEM * 1024 * 1024 / sizes[0];
-
- return 0;
-}
-
-static int mx3_videobuf_prepare(struct vb2_buffer *vb)
-{
- struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx3_camera_dev *mx3_cam = ici->priv;
- struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
- struct scatterlist *sg;
- struct mx3_camera_buffer *buf;
- size_t new_size;
- int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+ if (fmt) {
+ const struct soc_camera_format_xlate *xlate = soc_camera_xlate_by_fourcc(icd,
+ fmt->fmt.pix.pixelformat);
+ bytes_per_line = soc_mbus_bytes_per_line(fmt->fmt.pix.width,
+ xlate->host_fmt);
+ height = fmt->fmt.pix.height;
+ } else {
+ /* Called from VIDIOC_REQBUFS or in compatibility mode */
+ bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
icd->current_fmt->host_fmt);
-
+ height = icd->user_height;
+ }
if (bytes_per_line < 0)
return bytes_per_line;
- buf = to_mx3_vb(vb);
- sg = &buf->sg;
-
- new_size = bytes_per_line * icd->user_height;
-
- if (vb2_plane_size(vb, 0) < new_size) {
- dev_err(icd->parent, "Buffer too small (%lu < %zu)\n",
- vb2_plane_size(vb, 0), new_size);
- return -ENOBUFS;
- }
+ sizes[0] = bytes_per_line * height;
- if (buf->state == CSI_BUF_NEEDS_INIT) {
- sg_dma_address(sg) = vb2_dma_contig_plane_paddr(vb, 0);
- sg_dma_len(sg) = new_size;
+ alloc_ctxs[0] = mx3_cam->alloc_ctx;
- buf->txd = ichan->dma_chan.device->device_prep_slave_sg(
- &ichan->dma_chan, sg, 1, DMA_FROM_DEVICE,
- DMA_PREP_INTERRUPT);
- if (!buf->txd)
- return -EIO;
+ if (!vq->num_buffers)
+ mx3_cam->sequence = 0;
- buf->txd->callback_param = buf->txd;
- buf->txd->callback = mx3_cam_dma_done;
+ if (!*count)
+ *count = 2;
- buf->state = CSI_BUF_PREPARED;
- }
+ /* If *num_planes != 0, we have already verified *count. */
+ if (!*num_planes &&
+ sizes[0] * *count + mx3_cam->buf_total > MAX_VIDEO_MEM * 1024 * 1024)
+ *count = (MAX_VIDEO_MEM * 1024 * 1024 - mx3_cam->buf_total) /
+ sizes[0];
- vb2_set_plane_payload(vb, 0, new_size);
+ *num_planes = 1;
return 0;
}
@@ -288,28 +260,58 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb)
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct mx3_camera_dev *mx3_cam = ici->priv;
struct mx3_camera_buffer *buf = to_mx3_vb(vb);
- struct dma_async_tx_descriptor *txd = buf->txd;
- struct idmac_channel *ichan = to_idmac_chan(txd->chan);
+ struct scatterlist *sg = &buf->sg;
+ struct dma_async_tx_descriptor *txd;
+ struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
struct idmac_video_param *video = &ichan->params.video;
- dma_cookie_t cookie;
- u32 fourcc = icd->current_fmt->host_fmt->fourcc;
+ const struct soc_mbus_pixelfmt *host_fmt = icd->current_fmt->host_fmt;
+ int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, host_fmt);
unsigned long flags;
+ dma_cookie_t cookie;
+ size_t new_size;
+
+ BUG_ON(bytes_per_line <= 0);
+
+ new_size = bytes_per_line * icd->user_height;
+
+ if (vb2_plane_size(vb, 0) < new_size) {
+ dev_err(icd->parent, "Buffer #%d too small (%lu < %zu)\n",
+ vb->v4l2_buf.index, vb2_plane_size(vb, 0), new_size);
+ goto error;
+ }
+
+ if (buf->state == CSI_BUF_NEEDS_INIT) {
+ sg_dma_address(sg) = vb2_dma_contig_plane_paddr(vb, 0);
+ sg_dma_len(sg) = new_size;
+
+ txd = ichan->dma_chan.device->device_prep_slave_sg(
+ &ichan->dma_chan, sg, 1, DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT);
+ if (!txd)
+ goto error;
+
+ txd->callback_param = txd;
+ txd->callback = mx3_cam_dma_done;
+
+ buf->state = CSI_BUF_PREPARED;
+ buf->txd = txd;
+ } else {
+ txd = buf->txd;
+ }
+
+ vb2_set_plane_payload(vb, 0, new_size);
/* This is the configuration of one sg-element */
- video->out_pixel_fmt = fourcc_to_ipu_pix(fourcc);
+ video->out_pixel_fmt = fourcc_to_ipu_pix(host_fmt->fourcc);
if (video->out_pixel_fmt == IPU_PIX_FMT_GENERIC) {
/*
- * If the IPU DMA channel is configured to transport
- * generic 8-bit data, we have to set up correctly the
- * geometry parameters upon the current pixel format.
- * So, since the DMA horizontal parameters are expressed
- * in bytes not pixels, convert these in the right unit.
+ * If the IPU DMA channel is configured to transfer generic
+ * 8-bit data, we have to set up the geometry parameters
+ * correctly, according to the current pixel format. The DMA
+ * horizontal parameters in this case are expressed in bytes,
+ * not in pixels.
*/
- int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
- icd->current_fmt->host_fmt);
- BUG_ON(bytes_per_line <= 0);
-
video->out_width = bytes_per_line;
video->out_height = icd->user_height;
video->out_stride = bytes_per_line;
@@ -353,6 +355,7 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb)
mx3_cam->active = NULL;
spin_unlock_irqrestore(&mx3_cam->lock, flags);
+error:
vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
}
@@ -386,17 +389,24 @@ static void mx3_videobuf_release(struct vb2_buffer *vb)
}
spin_unlock_irqrestore(&mx3_cam->lock, flags);
+
+ mx3_cam->buf_total -= vb2_plane_size(vb, 0);
}
static int mx3_videobuf_init(struct vb2_buffer *vb)
{
+ struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
+ struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+ struct mx3_camera_dev *mx3_cam = ici->priv;
struct mx3_camera_buffer *buf = to_mx3_vb(vb);
+
/* This is for locking debugging only */
INIT_LIST_HEAD(&buf->queue);
sg_init_table(&buf->sg, 1);
buf->state = CSI_BUF_NEEDS_INIT;
- buf->txd = NULL;
+
+ mx3_cam->buf_total += vb2_plane_size(vb, 0);
return 0;
}
@@ -407,13 +417,12 @@ static int mx3_stop_streaming(struct vb2_queue *q)
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct mx3_camera_dev *mx3_cam = ici->priv;
struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
- struct dma_chan *chan;
struct mx3_camera_buffer *buf, *tmp;
unsigned long flags;
if (ichan) {
- chan = &ichan->dma_chan;
- chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+ struct dma_chan *chan = &ichan->dma_chan;
+ chan->device->device_control(chan, DMA_PAUSE, 0);
}
spin_lock_irqsave(&mx3_cam->lock, flags);
@@ -421,8 +430,8 @@ static int mx3_stop_streaming(struct vb2_queue *q)
mx3_cam->active = NULL;
list_for_each_entry_safe(buf, tmp, &mx3_cam->capture, queue) {
- buf->state = CSI_BUF_NEEDS_INIT;
list_del_init(&buf->queue);
+ vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
}
spin_unlock_irqrestore(&mx3_cam->lock, flags);
@@ -432,7 +441,6 @@ static int mx3_stop_streaming(struct vb2_queue *q)
static struct vb2_ops mx3_videobuf_ops = {
.queue_setup = mx3_videobuf_setup,
- .buf_prepare = mx3_videobuf_prepare,
.buf_queue = mx3_videobuf_queue,
.buf_cleanup = mx3_videobuf_release,
.buf_init = mx3_videobuf_init,
@@ -516,6 +524,7 @@ static int mx3_camera_add_device(struct soc_camera_device *icd)
mx3_camera_activate(mx3_cam, icd);
+ mx3_cam->buf_total = 0;
mx3_cam->icd = icd;
dev_info(icd->parent, "MX3 Camera driver attached to camera %d\n",
@@ -1263,8 +1272,6 @@ static int __devexit mx3_camera_remove(struct platform_device *pdev)
dmaengine_put();
- dev_info(&pdev->dev, "i.MX3x Camera driver unloaded\n");
-
return 0;
}
Prepare the mx3_camera driver to support the new VIDIOC_CREATE_BUFS and VIDIOC_PREPARE_BUF ioctl()s. The .queue_setup() vb2 operation must be able to handle buffer sizes, provided by the caller, and the .buf_prepare() operation must not use the currently configured frame format for its operation, which makes it superfluous for this driver. Its functionality is moved into .buf_queue(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Pawel Osciak <pawel@osciak.com> Cc: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> --- v6: Handle the case of VIDIOC_CREATE_BUFS, when vb2 creates fewer buffers, than requested by the user, correctly drivers/media/video/mx3_camera.c | 159 ++++++++++++++++++++------------------ 1 files changed, 83 insertions(+), 76 deletions(-)