From patchwork Thu Jul 26 18:08:43 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mariusz Bialonczyk X-Patchwork-Id: 1244051 Return-Path: X-Original-To: patchwork-linux-media@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork1.kernel.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by patchwork1.kernel.org (Postfix) with ESMTP id 747193FC5A for ; Thu, 26 Jul 2012 18:39:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752359Ab2GZSjn (ORCPT ); Thu, 26 Jul 2012 14:39:43 -0400 Received: from skyboo.net ([82.160.187.4]:54176 "EHLO skyboo.net" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1752349Ab2GZSjl (ORCPT ); Thu, 26 Jul 2012 14:39:41 -0400 X-Greylist: delayed 1748 seconds by postgrey-1.27 at vger.kernel.org; Thu, 26 Jul 2012 14:39:41 EDT Received: from manio by skyboo.net with local (Exim 4.80) (envelope-from ) id 1SuSVN-00039K-7a; Thu, 26 Jul 2012 20:09:46 +0200 From: Mariusz Bialonczyk To: Linux Media Mailing List , Mauro Carvalho Chehab Cc: Mariusz Bialonczyk Date: Thu, 26 Jul 2012 20:08:43 +0200 Message-Id: <1343326123-11882-1-git-send-email-manio@skyboo.net> X-Mailer: git-send-email 1.7.10 X-SA-Exim-Connect-IP: X-SA-Exim-Mail-From: manio@skyboo.net X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on draco.skyboo.net X-Spam-Level: X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,NO_RELAYS autolearn=ham version=3.3.2 Subject: [PATCH] Add support for Prof Revolution DVB-S2 8000 PCI-E card X-SA-Exim-Version: 4.2.1 (built Mon, 26 Dec 2011 16:24:06 +0000) X-SA-Exim-Scanned: Yes (on skyboo.net) Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The device is based on STV0903 demodulator, STB6100 tuner and CX23885 chipset; subsystem id: 8000:3034 Signed-off-by: Mariusz Bialonczyk --- drivers/media/video/cx23885/Kconfig | 1 + drivers/media/video/cx23885/cx23885-cards.c | 10 +++++ drivers/media/video/cx23885/cx23885-dvb.c | 56 +++++++++++++++++++++++++++ drivers/media/video/cx23885/cx23885.h | 1 + 4 files changed, 68 insertions(+) diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index b391e9b..510adfe 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -21,6 +21,7 @@ config VIDEO_CX23885 select DVB_STV6110 if !DVB_FE_CUSTOMISE select DVB_CX24116 if !DVB_FE_CUSTOMISE select DVB_STV0900 if !DVB_FE_CUSTOMISE + select DVB_STV090x if !DVB_FE_CUSTOMISE select DVB_DS3000 if !DVB_FE_CUSTOMISE select DVB_STV0367 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 080e111..50fedff 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -564,6 +564,10 @@ struct cx23885_board cx23885_boards[] = { [CX23885_BOARD_TEVII_S471] = { .name = "TeVii S471", .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_PROF_8000] = { + .name = "Prof Revolution DVB-S2 8000", + .portb = CX23885_MPEG_DVB, } }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -776,6 +780,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0xd471, .subdevice = 0x9022, .card = CX23885_BOARD_TEVII_S471, + }, { + .subvendor = 0x8000, + .subdevice = 0x3034, + .card = CX23885_BOARD_PROF_8000, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -1155,6 +1163,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) cx_set(GP0_IO, 0x00040004); break; case CX23885_BOARD_TBS_6920: + case CX23885_BOARD_PROF_8000: cx_write(MC417_CTL, 0x00000036); cx_write(MC417_OEN, 0x00001000); cx_set(MC417_RWD, 0x00000002); @@ -1536,6 +1545,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_TEVII_S470: case CX23885_BOARD_TEVII_S471: case CX23885_BOARD_DVBWORLD_2005: + case CX23885_BOARD_PROF_8000: ts1->gen_ctrl_val = 0x5; /* Parallel */ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index cd54268..ba046ea 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -63,6 +63,9 @@ #include "stv0367.h" #include "drxk.h" #include "mt2063.h" +#include "stv090x.h" +#include "stb6100.h" +#include "stb6100_cfg.h" static unsigned int debug; @@ -489,6 +492,42 @@ static struct xc5000_config mygica_x8506_xc5000_config = { .if_khz = 5380, }; +static struct stv090x_config prof_8000_stv090x_config = { + .device = STV0903, + .demod_mode = STV090x_SINGLE, + .clk_mode = STV090x_CLK_EXT, + .xtal = 27000000, + .address = 0x6A, + .ts1_mode = STV090x_TSMODE_PARALLEL_PUNCTURED, + .repeater_level = STV090x_RPTLEVEL_64, + .adc1_range = STV090x_ADC_2Vpp, + .diseqc_envelope_mode = false, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, +}; + +static struct stb6100_config prof_8000_stb6100_config = { + .tuner_address = 0x60, + .refclock = 27000000, +}; + +static int p8000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + if (voltage == SEC_VOLTAGE_18) + cx_write(MC417_RWD, 0x00001e00); + else if (voltage == SEC_VOLTAGE_13) + cx_write(MC417_RWD, 0x00001a00); + else + cx_write(MC417_RWD, 0x00001800); + return 0; +} + static int cx23885_dvb_set_frontend(struct dvb_frontend *fe) { struct dtv_frontend_properties *p = &fe->dtv_property_cache; @@ -1186,6 +1225,23 @@ static int dvb_register(struct cx23885_tsport *port) &tevii_ds3000_config, &i2c_bus->i2c_adap); break; + case CX23885_BOARD_PROF_8000: + i2c_bus = &dev->i2c_bus[0]; + + fe0->dvb.frontend = dvb_attach(stv090x_attach, + &prof_8000_stv090x_config, + &i2c_bus->i2c_adap, + STV090x_DEMODULATOR_0); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(stb6100_attach, + fe0->dvb.frontend, + &prof_8000_stb6100_config, + &i2c_bus->i2c_adap)) + goto frontend_detach; + + fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage; + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 13c37ec..452ccec 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -91,6 +91,7 @@ #define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34 #define CX23885_BOARD_TEVII_S471 35 #define CX23885_BOARD_HAUPPAUGE_HVR1255_22111 36 +#define CX23885_BOARD_PROF_8000 37 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002