| Message ID | 1347373418-18927-1-git-send-email-prabhakar.lad@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue 11 September 2012 16:23:38 Prabhakar Lad wrote: > From: Lad, Prabhakar <prabhakar.lad@ti.com> > > Add a helper function to modify the menu, max and default value > to set. > > Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> > Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> > Cc: Hans Verkuil <hans.verkuil@cisco.com> > Cc: Sakari Ailus <sakari.ailus@iki.fi> > Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@infradead.org> > Cc: Hans de Goede <hdegoede@redhat.com> > Cc: Kyungmin Park <kyungmin.park@samsung.com> > Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> > Cc: Rob Landley <rob@landley.net> Thanks! Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Regards, Hans > --- > Changes for v3: > 1: Fixed style/grammer issues as pointed by Hans. > Thanks Hans for providing the description. > > Changes for v2: > 1: Fixed review comments from Hans, to have return type as > void, add WARN_ON() for fail conditions, allow this fucntion > to modify the menu of custom controls. > > Documentation/video4linux/v4l2-controls.txt | 29 +++++++++++++++++++++++++++ > drivers/media/v4l2-core/v4l2-ctrls.c | 17 +++++++++++++++ > include/media/v4l2-ctrls.h | 11 ++++++++++ > 3 files changed, 57 insertions(+), 0 deletions(-) > > diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt > index 43da22b..01d0a82 100644 > --- a/Documentation/video4linux/v4l2-controls.txt > +++ b/Documentation/video4linux/v4l2-controls.txt > @@ -367,6 +367,35 @@ it to 0 means that all menu items are supported. > You set this mask either through the v4l2_ctrl_config struct for a custom > control, or by calling v4l2_ctrl_new_std_menu(). > > +There are situations where menu items may be device specific. In such cases the > +framework provides a helper function to change the menu: > + > +void v4l2_ctrl_modify_menu(struct v4l2_ctrl *ctrl, const char * const *qmenu, > + s32 max, u32 menu_skip_mask, s32 def); > + > +A good example is the test pattern control for capture/display/sensors devices > +that have the capability to generate test patterns. These test patterns are > +hardware specific, so the contents of the menu will vary from device to device. > + > +This helper function is used to modify the menu, max, mask and the default > +value of the control. > + > +Example: > + > + static const char * const test_pattern[] = { > + "Disabled", > + "Vertical Bars", > + "Solid Black", > + "Solid White", > + NULL, > + }; > + struct v4l2_ctrl *test_pattern_ctrl = > + v4l2_ctrl_new_std_menu(&foo->ctrl_handler, &foo_ctrl_ops, > + V4L2_CID_TEST_PATTERN, V4L2_TEST_PATTERN_DISABLED, 0, > + V4L2_TEST_PATTERN_DISABLED); > + > + v4l2_ctrl_modify_menu(test_pattern_ctrl, test_pattern, 3, 0, > + V4L2_TEST_PATTERN_DISABLED); > > Custom Controls > =============== > diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c > index d731422..d89b460 100644 > --- a/drivers/media/v4l2-core/v4l2-ctrls.c > +++ b/drivers/media/v4l2-core/v4l2-ctrls.c > @@ -2666,3 +2666,20 @@ unsigned int v4l2_ctrl_poll(struct file *file, struct poll_table_struct *wait) > return 0; > } > EXPORT_SYMBOL(v4l2_ctrl_poll); > + > +/* Helper function for modifying the menu */ > +void v4l2_ctrl_modify_menu(struct v4l2_ctrl *ctrl, const char * const *qmenu, > + s32 max, u32 menu_skip_mask, s32 def) > +{ > + if (WARN_ON(ctrl->type != V4L2_CTRL_TYPE_MENU || qmenu == NULL)) > + return; > + > + if (WARN_ON(def < 0 || def > max)) > + return; > + > + ctrl->qmenu = qmenu; > + ctrl->maximum = max; > + ctrl->menu_skip_mask = menu_skip_mask; > + ctrl->cur.val = ctrl->val = ctrl->default_value = def; > +} > +EXPORT_SYMBOL(v4l2_ctrl_modify_menu); > diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h > index 776605f..5303489 100644 > --- a/include/media/v4l2-ctrls.h > +++ b/include/media/v4l2-ctrls.h > @@ -488,6 +488,17 @@ static inline void v4l2_ctrl_unlock(struct v4l2_ctrl *ctrl) > mutex_unlock(ctrl->handler->lock); > } > > +/** > + * v4l2_ctrl_modify_menu() - This function is used to modify the menu. > + * @ctrl: The control whose menu should be modified. > + * @qmenu: The new menu. > + * @max: Maximum value of the control. > + * @menu_skip_mask: The control's skip mask for menu controls. > + * @def: The default value for control to be set. > + */ > +void v4l2_ctrl_modify_menu(struct v4l2_ctrl *ctrl, const char * const *qmenu, > + s32 max, u32 menu_skip_mask, s32 def); > + > /** v4l2_ctrl_g_ctrl() - Helper function to get the control's value from within a driver. > * @ctrl: The control. > * > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Prabhakar, Thanks for the patch. On Tuesday 11 September 2012 19:53:38 Prabhakar Lad wrote: > From: Lad, Prabhakar <prabhakar.lad@ti.com> > > Add a helper function to modify the menu, max and default value > to set. > > Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> > Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> > Cc: Hans Verkuil <hans.verkuil@cisco.com> > Cc: Sakari Ailus <sakari.ailus@iki.fi> > Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@infradead.org> > Cc: Hans de Goede <hdegoede@redhat.com> > Cc: Kyungmin Park <kyungmin.park@samsung.com> > Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> > Cc: Rob Landley <rob@landley.net> > --- > Changes for v3: > 1: Fixed style/grammer issues as pointed by Hans. > Thanks Hans for providing the description. > > Changes for v2: > 1: Fixed review comments from Hans, to have return type as > void, add WARN_ON() for fail conditions, allow this fucntion > to modify the menu of custom controls. > > Documentation/video4linux/v4l2-controls.txt | 29 ++++++++++++++++++++++++ > drivers/media/v4l2-core/v4l2-ctrls.c | 17 +++++++++++++++ > include/media/v4l2-ctrls.h | 11 ++++++++++ > 3 files changed, 57 insertions(+), 0 deletions(-) > > diff --git a/Documentation/video4linux/v4l2-controls.txt > b/Documentation/video4linux/v4l2-controls.txt index 43da22b..01d0a82 100644 > --- a/Documentation/video4linux/v4l2-controls.txt > +++ b/Documentation/video4linux/v4l2-controls.txt > @@ -367,6 +367,35 @@ it to 0 means that all menu items are supported. > You set this mask either through the v4l2_ctrl_config struct for a custom > control, or by calling v4l2_ctrl_new_std_menu(). > > +There are situations where menu items may be device specific. In such cases > the > +framework provides a helper function to change the menu: > + > +void v4l2_ctrl_modify_menu(struct v4l2_ctrl *ctrl, const char * const > *qmenu, > + s32 max, u32 menu_skip_mask, s32 def); Sorry if this is a stupid question, but wouldn't it be better to add a function to create a custom menu instead of modifying it afterwards ? > + > +A good example is the test pattern control for capture/display/sensors > devices > +that have the capability to generate test patterns. These test patterns are > +hardware specific, so the contents of the menu will vary from device to > device. > + > +This helper function is used to modify the menu, max, mask and the default > +value of the control. > + > +Example: > + > + static const char * const test_pattern[] = { > + "Disabled", > + "Vertical Bars", > + "Solid Black", > + "Solid White", > + NULL, > + }; > + struct v4l2_ctrl *test_pattern_ctrl = > + v4l2_ctrl_new_std_menu(&foo->ctrl_handler, &foo_ctrl_ops, > + V4L2_CID_TEST_PATTERN, V4L2_TEST_PATTERN_DISABLED, 0, > + V4L2_TEST_PATTERN_DISABLED); > + > + v4l2_ctrl_modify_menu(test_pattern_ctrl, test_pattern, 3, 0, > + V4L2_TEST_PATTERN_DISABLED); > > Custom Controls > ===============
Hi Laurent, Thanks for the review. On Thursday 13 September 2012 06:45 AM, Laurent Pinchart wrote: > Hi Prabhakar, > > Thanks for the patch. > > On Tuesday 11 September 2012 19:53:38 Prabhakar Lad wrote: >> From: Lad, Prabhakar <prabhakar.lad@ti.com> >> >> Add a helper function to modify the menu, max and default value >> to set. >> >> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> >> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> >> Cc: Hans Verkuil <hans.verkuil@cisco.com> >> Cc: Sakari Ailus <sakari.ailus@iki.fi> >> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> >> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> >> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> >> Cc: Hans de Goede <hdegoede@redhat.com> >> Cc: Kyungmin Park <kyungmin.park@samsung.com> >> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> >> Cc: Rob Landley <rob@landley.net> >> --- >> Changes for v3: >> 1: Fixed style/grammer issues as pointed by Hans. >> Thanks Hans for providing the description. >> >> Changes for v2: >> 1: Fixed review comments from Hans, to have return type as >> void, add WARN_ON() for fail conditions, allow this fucntion >> to modify the menu of custom controls. >> >> Documentation/video4linux/v4l2-controls.txt | 29 ++++++++++++++++++++++++ >> drivers/media/v4l2-core/v4l2-ctrls.c | 17 +++++++++++++++ >> include/media/v4l2-ctrls.h | 11 ++++++++++ >> 3 files changed, 57 insertions(+), 0 deletions(-) >> >> diff --git a/Documentation/video4linux/v4l2-controls.txt >> b/Documentation/video4linux/v4l2-controls.txt index 43da22b..01d0a82 100644 >> --- a/Documentation/video4linux/v4l2-controls.txt >> +++ b/Documentation/video4linux/v4l2-controls.txt >> @@ -367,6 +367,35 @@ it to 0 means that all menu items are supported. >> You set this mask either through the v4l2_ctrl_config struct for a custom >> control, or by calling v4l2_ctrl_new_std_menu(). >> >> +There are situations where menu items may be device specific. In such cases >> the >> +framework provides a helper function to change the menu: >> + >> +void v4l2_ctrl_modify_menu(struct v4l2_ctrl *ctrl, const char * const >> *qmenu, >> + s32 max, u32 menu_skip_mask, s32 def); > > Sorry if this is a stupid question, but wouldn't it be better to add a > function to create a custom menu instead of modifying it afterwards ? > Create a custom menu? eventually everything boils down to modifying the menu itself. Regards, --Prabhakar Lad >> + >> +A good example is the test pattern control for capture/display/sensors >> devices >> +that have the capability to generate test patterns. These test patterns are >> +hardware specific, so the contents of the menu will vary from device to >> device. >> + >> +This helper function is used to modify the menu, max, mask and the default >> +value of the control. >> + >> +Example: >> + >> + static const char * const test_pattern[] = { >> + "Disabled", >> + "Vertical Bars", >> + "Solid Black", >> + "Solid White", >> + NULL, >> + }; >> + struct v4l2_ctrl *test_pattern_ctrl = >> + v4l2_ctrl_new_std_menu(&foo->ctrl_handler, &foo_ctrl_ops, >> + V4L2_CID_TEST_PATTERN, V4L2_TEST_PATTERN_DISABLED, 0, >> + V4L2_TEST_PATTERN_DISABLED); >> + >> + v4l2_ctrl_modify_menu(test_pattern_ctrl, test_pattern, 3, 0, >> + V4L2_TEST_PATTERN_DISABLED); >> >> Custom Controls >> =============== > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu 13 September 2012 13:43:36 Prabhakar Lad wrote: > Hi Laurent, > > Thanks for the review. > > On Thursday 13 September 2012 06:45 AM, Laurent Pinchart wrote: > > Hi Prabhakar, > > > > Thanks for the patch. > > > > On Tuesday 11 September 2012 19:53:38 Prabhakar Lad wrote: > >> From: Lad, Prabhakar <prabhakar.lad@ti.com> > >> > >> Add a helper function to modify the menu, max and default value > >> to set. > >> > >> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> > >> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> > >> Cc: Hans Verkuil <hans.verkuil@cisco.com> > >> Cc: Sakari Ailus <sakari.ailus@iki.fi> > >> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> > >> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > >> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> > >> Cc: Hans de Goede <hdegoede@redhat.com> > >> Cc: Kyungmin Park <kyungmin.park@samsung.com> > >> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> > >> Cc: Rob Landley <rob@landley.net> > >> --- > >> Changes for v3: > >> 1: Fixed style/grammer issues as pointed by Hans. > >> Thanks Hans for providing the description. > >> > >> Changes for v2: > >> 1: Fixed review comments from Hans, to have return type as > >> void, add WARN_ON() for fail conditions, allow this fucntion > >> to modify the menu of custom controls. > >> > >> Documentation/video4linux/v4l2-controls.txt | 29 ++++++++++++++++++++++++ > >> drivers/media/v4l2-core/v4l2-ctrls.c | 17 +++++++++++++++ > >> include/media/v4l2-ctrls.h | 11 ++++++++++ > >> 3 files changed, 57 insertions(+), 0 deletions(-) > >> > >> diff --git a/Documentation/video4linux/v4l2-controls.txt > >> b/Documentation/video4linux/v4l2-controls.txt index 43da22b..01d0a82 100644 > >> --- a/Documentation/video4linux/v4l2-controls.txt > >> +++ b/Documentation/video4linux/v4l2-controls.txt > >> @@ -367,6 +367,35 @@ it to 0 means that all menu items are supported. > >> You set this mask either through the v4l2_ctrl_config struct for a custom > >> control, or by calling v4l2_ctrl_new_std_menu(). > >> > >> +There are situations where menu items may be device specific. In such cases > >> the > >> +framework provides a helper function to change the menu: > >> + > >> +void v4l2_ctrl_modify_menu(struct v4l2_ctrl *ctrl, const char * const > >> *qmenu, > >> + s32 max, u32 menu_skip_mask, s32 def); > > > > Sorry if this is a stupid question, but wouldn't it be better to add a > > function to create a custom menu instead of modifying it afterwards ? > > > Create a custom menu? eventually everything boils down to modifying the > menu itself. Laurent, the reason we went for modifying a standard control is that that ensures that the control name and type is all standardized. The only thing that can be changed later is the menu contents. Regards, Hans > > Regards, > --Prabhakar Lad > > >> + > >> +A good example is the test pattern control for capture/display/sensors > >> devices > >> +that have the capability to generate test patterns. These test patterns are > >> +hardware specific, so the contents of the menu will vary from device to > >> device. > >> + > >> +This helper function is used to modify the menu, max, mask and the default > >> +value of the control. > >> + > >> +Example: > >> + > >> + static const char * const test_pattern[] = { > >> + "Disabled", > >> + "Vertical Bars", > >> + "Solid Black", > >> + "Solid White", > >> + NULL, > >> + }; > >> + struct v4l2_ctrl *test_pattern_ctrl = > >> + v4l2_ctrl_new_std_menu(&foo->ctrl_handler, &foo_ctrl_ops, > >> + V4L2_CID_TEST_PATTERN, V4L2_TEST_PATTERN_DISABLED, 0, > >> + V4L2_TEST_PATTERN_DISABLED); > >> + > >> + v4l2_ctrl_modify_menu(test_pattern_ctrl, test_pattern, 3, 0, > >> + V4L2_TEST_PATTERN_DISABLED); > >> > >> Custom Controls > >> =============== > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt index 43da22b..01d0a82 100644 --- a/Documentation/video4linux/v4l2-controls.txt +++ b/Documentation/video4linux/v4l2-controls.txt @@ -367,6 +367,35 @@ it to 0 means that all menu items are supported. You set this mask either through the v4l2_ctrl_config struct for a custom control, or by calling v4l2_ctrl_new_std_menu(). +There are situations where menu items may be device specific. In such cases the +framework provides a helper function to change the menu: + +void v4l2_ctrl_modify_menu(struct v4l2_ctrl *ctrl, const char * const *qmenu, + s32 max, u32 menu_skip_mask, s32 def); + +A good example is the test pattern control for capture/display/sensors devices +that have the capability to generate test patterns. These test patterns are +hardware specific, so the contents of the menu will vary from device to device. + +This helper function is used to modify the menu, max, mask and the default +value of the control. + +Example: + + static const char * const test_pattern[] = { + "Disabled", + "Vertical Bars", + "Solid Black", + "Solid White", + NULL, + }; + struct v4l2_ctrl *test_pattern_ctrl = + v4l2_ctrl_new_std_menu(&foo->ctrl_handler, &foo_ctrl_ops, + V4L2_CID_TEST_PATTERN, V4L2_TEST_PATTERN_DISABLED, 0, + V4L2_TEST_PATTERN_DISABLED); + + v4l2_ctrl_modify_menu(test_pattern_ctrl, test_pattern, 3, 0, + V4L2_TEST_PATTERN_DISABLED); Custom Controls =============== diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c index d731422..d89b460 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -2666,3 +2666,20 @@ unsigned int v4l2_ctrl_poll(struct file *file, struct poll_table_struct *wait) return 0; } EXPORT_SYMBOL(v4l2_ctrl_poll); + +/* Helper function for modifying the menu */ +void v4l2_ctrl_modify_menu(struct v4l2_ctrl *ctrl, const char * const *qmenu, + s32 max, u32 menu_skip_mask, s32 def) +{ + if (WARN_ON(ctrl->type != V4L2_CTRL_TYPE_MENU || qmenu == NULL)) + return; + + if (WARN_ON(def < 0 || def > max)) + return; + + ctrl->qmenu = qmenu; + ctrl->maximum = max; + ctrl->menu_skip_mask = menu_skip_mask; + ctrl->cur.val = ctrl->val = ctrl->default_value = def; +} +EXPORT_SYMBOL(v4l2_ctrl_modify_menu); diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h index 776605f..5303489 100644 --- a/include/media/v4l2-ctrls.h +++ b/include/media/v4l2-ctrls.h @@ -488,6 +488,17 @@ static inline void v4l2_ctrl_unlock(struct v4l2_ctrl *ctrl) mutex_unlock(ctrl->handler->lock); } +/** + * v4l2_ctrl_modify_menu() - This function is used to modify the menu. + * @ctrl: The control whose menu should be modified. + * @qmenu: The new menu. + * @max: Maximum value of the control. + * @menu_skip_mask: The control's skip mask for menu controls. + * @def: The default value for control to be set. + */ +void v4l2_ctrl_modify_menu(struct v4l2_ctrl *ctrl, const char * const *qmenu, + s32 max, u32 menu_skip_mask, s32 def); + /** v4l2_ctrl_g_ctrl() - Helper function to get the control's value from within a driver. * @ctrl: The control. *