diff mbox

[PATCHv14,4/7] fbmon: add videomode helpers

Message ID 1353661467-28545-5-git-send-email-s.trumtrar@pengutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Steffen Trumtrar Nov. 23, 2012, 9:04 a.m. UTC
Add a function to convert from the generic videomode to a fb_videomode.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/fbmon.c |   49 +++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/fb.h    |    6 ++++++
 2 files changed, 55 insertions(+)

Comments

Laurent Pinchart Nov. 23, 2012, 10:53 a.m. UTC | #1
Hi Steffen,

On Friday 23 November 2012 10:04:24 Steffen Trumtrar wrote:
> Add a function to convert from the generic videomode to a fb_videomode.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
> Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
> Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>  drivers/video/fbmon.c |   49 ++++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/fb.h    |    6 ++++++
>  2 files changed, 55 insertions(+)
> 
> diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
> index cef6557..bcbfe8f 100644
> --- a/drivers/video/fbmon.c
> +++ b/drivers/video/fbmon.c
> @@ -31,6 +31,7 @@
>  #include <linux/pci.h>
>  #include <linux/slab.h>
>  #include <video/edid.h>
> +#include <linux/videomode.h>

You could move this one line up to keep headers sorted alphabetically 
(assuming they are in the first place).

>  #ifdef CONFIG_PPC_OF
>  #include <asm/prom.h>
>  #include <asm/pci-bridge.h>
> @@ -1373,6 +1374,54 @@ int fb_get_mode(int flags, u32 val, struct
> fb_var_screeninfo *var, struct fb_inf kfree(timings);
>  	return err;
>  }
> +
> +#if IS_ENABLED(CONFIG_VIDEOMODE)
> +int fb_videomode_from_videomode(const struct videomode *vm,
> +				struct fb_videomode *fbmode)

This is inside the #if CONFIG_FB_MODE_HELPERS block, is that intentional ?

> +{
> +	unsigned int htotal, vtotal;
> +
> +	fbmode->xres = vm->hactive;
> +	fbmode->left_margin = vm->hback_porch;
> +	fbmode->right_margin = vm->hfront_porch;
> +	fbmode->hsync_len = vm->hsync_len;
> +
> +	fbmode->yres = vm->vactive;
> +	fbmode->upper_margin = vm->vback_porch;
> +	fbmode->lower_margin = vm->vfront_porch;
> +	fbmode->vsync_len = vm->vsync_len;
> +
> +	/* prevent division by zero in KHZ2PICOS macro */
> +	fbmode->pixclock = vm->pixelclock ? KHZ2PICOS(vm->pixelclock / 1000) : 0;
> +
> +	fbmode->sync = 0;
> +	fbmode->vmode = 0;
> +	if (vm->hah)
> +		fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
> +	if (vm->vah)
> +		fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
> +	if (vm->interlaced)
> +		fbmode->vmode |= FB_VMODE_INTERLACED;
> +	if (vm->doublescan)
> +		fbmode->vmode |= FB_VMODE_DOUBLE;
> +	fbmode->flag = 0;
> +
> +	htotal = vm->hactive + vm->hfront_porch + vm->hback_porch +
> +		 vm->hsync_len;
> +	vtotal = vm->vactive + vm->vfront_porch + vm->vback_porch +
> +		 vm->vsync_len;
> +	/* prevent division by zero */
> +	if (htotal && vtotal)
> +		fbmode->refresh = vm->pixelclock / (htotal * vtotal);
> +	else
> +		fbmode->refresh = vm->pixelclock;

What about returning an error if htotal * vtotal == 0 ? The input is clearly 
invalid in that case. I would then set fbmode->refresh to 0, setting it to vm-
>pixelclock doesn't really make sense.

> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
> +#endif
> +
> +

A single blank line should be enough.

>  #else
>  int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
>  {
> diff --git a/include/linux/fb.h b/include/linux/fb.h
> index c7a9571..4404ec2 100644
> --- a/include/linux/fb.h
> +++ b/include/linux/fb.h
> @@ -19,6 +19,7 @@ struct vm_area_struct;
>  struct fb_info;
>  struct device;
>  struct file;
> +struct videomode;
> 
>  /* Definitions below are used in the parsed monitor specs */
>  #define FB_DPMS_ACTIVE_OFF	1
> @@ -714,6 +715,11 @@ extern void fb_destroy_modedb(struct fb_videomode
> *modedb); extern int fb_find_mode_cvt(struct fb_videomode *mode, int
> margins, int rb); extern unsigned char *fb_ddc_read(struct i2c_adapter
> *adapter);
> 
> +#if IS_ENABLED(CONFIG_VIDEOMODE)
> +extern int fb_videomode_from_videomode(const struct videomode *vm,
> +				       struct fb_videomode *fbmode);
> +#endif
> +
>  /* drivers/video/modedb.c */
>  #define VESA_MODEDB_SIZE 34
>  extern void fb_var_to_videomode(struct fb_videomode *mode,
Steffen Trumtrar Nov. 23, 2012, 12:02 p.m. UTC | #2
Hi Laurent,

On Fri, Nov 23, 2012 at 11:53:10AM +0100, Laurent Pinchart wrote:
> Hi Steffen,
> 
> On Friday 23 November 2012 10:04:24 Steffen Trumtrar wrote:
> > Add a function to convert from the generic videomode to a fb_videomode.
> > 
> > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> > Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
> > Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
> > Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
> > Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> >  drivers/video/fbmon.c |   49 ++++++++++++++++++++++++++++++++++++++++++++++
> >  include/linux/fb.h    |    6 ++++++
> >  2 files changed, 55 insertions(+)
> > 
> > diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
> > index cef6557..bcbfe8f 100644
> > --- a/drivers/video/fbmon.c
> > +++ b/drivers/video/fbmon.c
> > @@ -31,6 +31,7 @@
> >  #include <linux/pci.h>
> >  #include <linux/slab.h>
> >  #include <video/edid.h>
> > +#include <linux/videomode.h>
> 
> You could move this one line up to keep headers sorted alphabetically 
> (assuming they are in the first place).
> 

Because of the careless mistake below, I will do that.

> >  #ifdef CONFIG_PPC_OF
> >  #include <asm/prom.h>
> >  #include <asm/pci-bridge.h>
> > @@ -1373,6 +1374,54 @@ int fb_get_mode(int flags, u32 val, struct
> > fb_var_screeninfo *var, struct fb_inf kfree(timings);
> >  	return err;
> >  }
> > +
> > +#if IS_ENABLED(CONFIG_VIDEOMODE)
> > +int fb_videomode_from_videomode(const struct videomode *vm,
> > +				struct fb_videomode *fbmode)
> 
> This is inside the #if CONFIG_FB_MODE_HELPERS block, is that intentional ?
> 

Yes. Intentional. It is a fb_mode helper, that is why ... oh, wait. I should
add a "depends on" to the Kconfig then.

> > +{
> > +	unsigned int htotal, vtotal;
> > +
> > +	fbmode->xres = vm->hactive;
> > +	fbmode->left_margin = vm->hback_porch;
> > +	fbmode->right_margin = vm->hfront_porch;
> > +	fbmode->hsync_len = vm->hsync_len;
> > +
> > +	fbmode->yres = vm->vactive;
> > +	fbmode->upper_margin = vm->vback_porch;
> > +	fbmode->lower_margin = vm->vfront_porch;
> > +	fbmode->vsync_len = vm->vsync_len;
> > +
> > +	/* prevent division by zero in KHZ2PICOS macro */
> > +	fbmode->pixclock = vm->pixelclock ? KHZ2PICOS(vm->pixelclock / 1000) : 0;
> > +
> > +	fbmode->sync = 0;
> > +	fbmode->vmode = 0;
> > +	if (vm->hah)
> > +		fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
> > +	if (vm->vah)
> > +		fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
> > +	if (vm->interlaced)
> > +		fbmode->vmode |= FB_VMODE_INTERLACED;
> > +	if (vm->doublescan)
> > +		fbmode->vmode |= FB_VMODE_DOUBLE;
> > +	fbmode->flag = 0;
> > +
> > +	htotal = vm->hactive + vm->hfront_porch + vm->hback_porch +
> > +		 vm->hsync_len;
> > +	vtotal = vm->vactive + vm->vfront_porch + vm->vback_porch +
> > +		 vm->vsync_len;
> > +	/* prevent division by zero */
> > +	if (htotal && vtotal)
> > +		fbmode->refresh = vm->pixelclock / (htotal * vtotal);
> > +	else
> > +		fbmode->refresh = vm->pixelclock;
> 
> What about returning an error if htotal * vtotal == 0 ? The input is clearly 
> invalid in that case. I would then set fbmode->refresh to 0, setting it to vm-
> >pixelclock doesn't really make sense.
> 

Yes, pixelclock makes no sense. It was supposed to be 0. I was careless here.

> > +
> > +	return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
> > +#endif
> > +
> > +
> 
> A single blank line should be enough.
> 

Regards,
Steffen
diff mbox

Patch

diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index cef6557..bcbfe8f 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -31,6 +31,7 @@ 
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <video/edid.h>
+#include <linux/videomode.h>
 #ifdef CONFIG_PPC_OF
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
@@ -1373,6 +1374,54 @@  int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_inf
 	kfree(timings);
 	return err;
 }
+
+#if IS_ENABLED(CONFIG_VIDEOMODE)
+int fb_videomode_from_videomode(const struct videomode *vm,
+				struct fb_videomode *fbmode)
+{
+	unsigned int htotal, vtotal;
+
+	fbmode->xres = vm->hactive;
+	fbmode->left_margin = vm->hback_porch;
+	fbmode->right_margin = vm->hfront_porch;
+	fbmode->hsync_len = vm->hsync_len;
+
+	fbmode->yres = vm->vactive;
+	fbmode->upper_margin = vm->vback_porch;
+	fbmode->lower_margin = vm->vfront_porch;
+	fbmode->vsync_len = vm->vsync_len;
+
+	/* prevent division by zero in KHZ2PICOS macro */
+	fbmode->pixclock = vm->pixelclock ? KHZ2PICOS(vm->pixelclock / 1000) : 0;
+
+	fbmode->sync = 0;
+	fbmode->vmode = 0;
+	if (vm->hah)
+		fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
+	if (vm->vah)
+		fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
+	if (vm->interlaced)
+		fbmode->vmode |= FB_VMODE_INTERLACED;
+	if (vm->doublescan)
+		fbmode->vmode |= FB_VMODE_DOUBLE;
+	fbmode->flag = 0;
+
+	htotal = vm->hactive + vm->hfront_porch + vm->hback_porch +
+		 vm->hsync_len;
+	vtotal = vm->vactive + vm->vfront_porch + vm->vback_porch +
+		 vm->vsync_len;
+	/* prevent division by zero */
+	if (htotal && vtotal)
+		fbmode->refresh = vm->pixelclock / (htotal * vtotal);
+	else
+		fbmode->refresh = vm->pixelclock;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
+#endif
+
+
 #else
 int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
 {
diff --git a/include/linux/fb.h b/include/linux/fb.h
index c7a9571..4404ec2 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -19,6 +19,7 @@  struct vm_area_struct;
 struct fb_info;
 struct device;
 struct file;
+struct videomode;
 
 /* Definitions below are used in the parsed monitor specs */
 #define FB_DPMS_ACTIVE_OFF	1
@@ -714,6 +715,11 @@  extern void fb_destroy_modedb(struct fb_videomode *modedb);
 extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
 extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
 
+#if IS_ENABLED(CONFIG_VIDEOMODE)
+extern int fb_videomode_from_videomode(const struct videomode *vm,
+				       struct fb_videomode *fbmode);
+#endif
+
 /* drivers/video/modedb.c */
 #define VESA_MODEDB_SIZE 34
 extern void fb_var_to_videomode(struct fb_videomode *mode,