Message ID | 1353677621-24143-1-git-send-email-twang13@marvell.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Fri, 23 Nov 2012, Albert Wang wrote: > From: Libin Yang <lbyang@marvell.com> > > This patch adds the new formats support for marvell-ccic. > > Signed-off-by: Albert Wang <twang13@marvell.com> > Signed-off-by: Libin Yang <lbyang@marvell.com> > --- > drivers/media/platform/marvell-ccic/mcam-core.c | 178 ++++++++++++++++++----- > drivers/media/platform/marvell-ccic/mcam-core.h | 6 + > 2 files changed, 151 insertions(+), 33 deletions(-) > > diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c > index 67d4f2f..c9f7250 100755 > --- a/drivers/media/platform/marvell-ccic/mcam-core.c > +++ b/drivers/media/platform/marvell-ccic/mcam-core.c > @@ -110,6 +110,30 @@ static struct mcam_format_struct { > .bpp = 2, > }, > { > + .desc = "UYVY 4:2:2", > + .pixelformat = V4L2_PIX_FMT_UYVY, > + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, > + .bpp = 2, > + }, > + { > + .desc = "YUV 4:2:2 PLANAR", > + .pixelformat = V4L2_PIX_FMT_YUV422P, > + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, > + .bpp = 2, > + }, > + { > + .desc = "YUV 4:2:0 PLANAR", > + .pixelformat = V4L2_PIX_FMT_YUV420, > + .mbus_code = V4L2_MBUS_FMT_YUYV8_1_5X8, > + .bpp = 2, > + }, > + { > + .desc = "YVU 4:2:0 PLANAR", > + .pixelformat = V4L2_PIX_FMT_YVU420, > + .mbus_code = V4L2_MBUS_FMT_YVYU8_1_5X8, > + .bpp = 2, > + }, > + { > .desc = "RGB 444", > .pixelformat = V4L2_PIX_FMT_RGB444, > .mbus_code = V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE, > @@ -168,6 +192,12 @@ struct mcam_dma_desc { > u32 segment_len; > }; > > +struct yuv_pointer_t { > + dma_addr_t y; > + dma_addr_t u; > + dma_addr_t v; > +}; > + > /* > * Our buffer type for working with videobuf2. Note that the vb2 > * developers have decreed that struct vb2_buffer must be at the > @@ -179,6 +209,7 @@ struct mcam_vb_buffer { > struct mcam_dma_desc *dma_desc; /* Descriptor virtual address */ > dma_addr_t dma_desc_pa; /* Descriptor physical address */ > int dma_desc_nent; /* Number of mapped descriptors */ > + struct yuv_pointer_t yuv_p; > }; > > static inline struct mcam_vb_buffer *vb_to_mvb(struct vb2_buffer *vb) > @@ -465,6 +496,18 @@ static inline int mcam_check_dma_buffers(struct mcam_camera *cam) > /* > * DMA-contiguous code. > */ > + > +static bool mcam_fmt_is_planar(__u32 pfmt) > +{ > + switch (pfmt) { > + case V4L2_PIX_FMT_YUV422P: > + case V4L2_PIX_FMT_YUV420: > + case V4L2_PIX_FMT_YVU420: > + return true; > + } > + return false; > +} > + > /* > * Set up a contiguous buffer for the given frame. Here also is where > * the underrun strategy is set: if there is no buffer available, reuse > @@ -476,6 +519,8 @@ static inline int mcam_check_dma_buffers(struct mcam_camera *cam) > static void mcam_set_contig_buffer(struct mcam_camera *cam, int frame) > { > struct mcam_vb_buffer *buf; > + struct v4l2_pix_format *fmt = &cam->pix_format; > + > /* > * If there are no available buffers, go into single mode > */ > @@ -494,8 +539,13 @@ static void mcam_set_contig_buffer(struct mcam_camera *cam, int frame) > } > > cam->vb_bufs[frame] = buf; > - mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR, > - vb2_dma_contig_plane_dma_addr(&buf->vb_buf, 0)); > + mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR, buf->yuv_p.y); > + if (mcam_fmt_is_planar(fmt->pixelformat)) { > + mcam_reg_write(cam, frame == 0 ? > + REG_U0BAR : REG_U1BAR, buf->yuv_p.u); > + mcam_reg_write(cam, frame == 0 ? > + REG_V0BAR : REG_V1BAR, buf->yuv_p.v); > + } > } > > /* > @@ -653,49 +703,91 @@ static inline void mcam_sg_restart(struct mcam_camera *cam) > */ > static void mcam_ctlr_image(struct mcam_camera *cam) > { > - int imgsz; > struct v4l2_pix_format *fmt = &cam->pix_format; > + u32 widthy = 0, widthuv = 0, imgsz_h, imgsz_w; > + > + cam_dbg(cam, "camera: bytesperline = %d; height = %d\n", > + fmt->bytesperline, fmt->sizeimage / fmt->bytesperline); > + imgsz_h = (fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK; > + imgsz_w = fmt->bytesperline & IMGSZ_H_MASK; > + > + if (fmt->pixelformat == V4L2_PIX_FMT_YUV420 > + || fmt->pixelformat == V4L2_PIX_FMT_YVU420) > + imgsz_w = (fmt->bytesperline * 4 / 3) & IMGSZ_H_MASK; > + else if (fmt->pixelformat == V4L2_PIX_FMT_JPEG) > + imgsz_h = (fmt->sizeimage / fmt->bytesperline) << IMGSZ_V_SHIFT; > + > + switch (fmt->pixelformat) { > + case V4L2_PIX_FMT_YUYV: > + case V4L2_PIX_FMT_UYVY: > + widthy = fmt->width * 2; > + widthuv = fmt->width * 2; > + break; I think, you can move imgsz_h and imgsz_w calculations from above to this switch too? > + case V4L2_PIX_FMT_RGB565: > + widthy = fmt->width * 2; > + widthuv = 0; > + break; > + case V4L2_PIX_FMT_JPEG: > + widthy = fmt->bytesperline; > + widthuv = fmt->bytesperline; > + break; > + case V4L2_PIX_FMT_YUV422P: > + case V4L2_PIX_FMT_YUV420: > + case V4L2_PIX_FMT_YVU420: > + widthy = fmt->width; > + widthuv = fmt->width / 2; > + break; > + default: > + break; > + } > + > + mcam_reg_write_mask(cam, REG_IMGPITCH, widthuv << 16 | widthy, > + IMGP_YP_MASK | IMGP_UVP_MASK); Hm, are you sure you're not breaking other currently supported pixel formats, like V4L2_PIX_FMT_RGB444, V4L2_PIX_FMT_SBGGR8? > + mcam_reg_write(cam, REG_IMGSIZE, imgsz_h | imgsz_w); > + mcam_reg_write(cam, REG_IMGOFFSET, 0x0); > > - imgsz = ((fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK) | > - (fmt->bytesperline & IMGSZ_H_MASK); > - mcam_reg_write(cam, REG_IMGSIZE, imgsz); > - mcam_reg_write(cam, REG_IMGOFFSET, 0); > - /* YPITCH just drops the last two bits */ > - mcam_reg_write_mask(cam, REG_IMGPITCH, fmt->bytesperline, > - IMGP_YP_MASK); Let's see. Before we had REG_IMGPITCH = fmt->bytesperline & 0x3ffc; after your change, say, for V4L2_PIX_FMT_YUYV (fmt->bytesperline = fmt->width * 2), you get REG_IMGPITCH = ((fmt->bytesperline << 16) | fmt->bytesperline) & 0x3ffc3ffc; Is this intentional? Doesn't widthuv have to be 0 for non-planar formats like V4L2_PIX_FMT_YUYV? Please, always when you change existing code make sure the original behaviour is preserved, unless there used to be a bug, in which case it should be fixed by a separate patch. > /* > * Tell the controller about the image format we are using. > */ > - switch (cam->pix_format.pixelformat) { > + switch (fmt->pixelformat) { > + case V4L2_PIX_FMT_YUV422P: > + mcam_reg_write_mask(cam, REG_CTRL0, > + C0_DF_YUV | C0_YUV_PLANAR | C0_YUVE_YVYU, C0_DF_MASK); > + break; > + case V4L2_PIX_FMT_YUV420: > + case V4L2_PIX_FMT_YVU420: > + mcam_reg_write_mask(cam, REG_CTRL0, > + C0_DF_YUV | C0_YUV_420PL | C0_YUVE_YVYU, C0_DF_MASK); > + break; > case V4L2_PIX_FMT_YUYV: > - mcam_reg_write_mask(cam, REG_CTRL0, > - C0_DF_YUV|C0_YUV_PACKED|C0_YUVE_YUYV, > - C0_DF_MASK); > - break; > - > + mcam_reg_write_mask(cam, REG_CTRL0, > + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_UYVY, C0_DF_MASK); > + break; > + case V4L2_PIX_FMT_UYVY: > + mcam_reg_write_mask(cam, REG_CTRL0, > + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_YUYV, C0_DF_MASK); > + break; > + case V4L2_PIX_FMT_JPEG: > + mcam_reg_write_mask(cam, REG_CTRL0, > + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_YUYV, C0_DF_MASK); > + break; > case V4L2_PIX_FMT_RGB444: > - mcam_reg_write_mask(cam, REG_CTRL0, > - C0_DF_RGB|C0_RGBF_444|C0_RGB4_XRGB, > - C0_DF_MASK); > - /* Alpha value? */ Unless you have a specific reason, you could just as well preserve the comment. > - break; > - > + mcam_reg_write_mask(cam, REG_CTRL0, > + C0_DF_RGB | C0_RGBF_444 | C0_RGB4_XRGB, C0_DF_MASK); > + break; > case V4L2_PIX_FMT_RGB565: > - mcam_reg_write_mask(cam, REG_CTRL0, > - C0_DF_RGB|C0_RGBF_565|C0_RGB5_BGGR, > - C0_DF_MASK); > - break; > - > + mcam_reg_write_mask(cam, REG_CTRL0, > + C0_DF_RGB | C0_RGBF_565 | C0_RGB5_BGGR, C0_DF_MASK); > + break; > default: > - cam_err(cam, "Unknown format %x\n", cam->pix_format.pixelformat); > - break; > + cam_err(cam, "camera: unknown format: %c\n", fmt->pixelformat); Don't think "%c" will produce a meaningful result here. > + break; > } > + > /* > * Make sure it knows we want to use hsync/vsync. > */ > - mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, > - C0_SIFM_MASK); > - > + mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, C0_SIFM_MASK); > /* > * This field controls the generation of EOF(DVP only) > */ > @@ -706,7 +798,6 @@ static void mcam_ctlr_image(struct mcam_camera *cam) > } > } > > - > /* > * Configure the controller for operation; caller holds the > * device mutex. > @@ -979,11 +1070,32 @@ static void mcam_vb_buf_queue(struct vb2_buffer *vb) > { > struct mcam_vb_buffer *mvb = vb_to_mvb(vb); > struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); > + struct v4l2_pix_format *fmt = &cam->pix_format; > unsigned long flags; > int start; > + dma_addr_t dma_handle; > + u32 base_size = fmt->width * fmt->height; Shouldn't you be just using bytesperline? Is stride != width * height supported? > > spin_lock_irqsave(&cam->dev_lock, flags); > + dma_handle = vb2_dma_contig_plane_dma_addr(vb, 0); > + BUG_ON(!dma_handle); > start = (cam->state == S_BUFWAIT) && !list_empty(&cam->buffers); > + > + if (cam->pix_format.pixelformat == V4L2_PIX_FMT_YUV422P) { Better use a "switch." > + mvb->yuv_p.y = dma_handle; > + mvb->yuv_p.u = mvb->yuv_p.y + base_size; > + mvb->yuv_p.v = mvb->yuv_p.u + base_size / 2; > + } else if (cam->pix_format.pixelformat == V4L2_PIX_FMT_YUV420) { > + mvb->yuv_p.y = dma_handle; > + mvb->yuv_p.u = mvb->yuv_p.y + base_size; > + mvb->yuv_p.v = mvb->yuv_p.u + base_size / 4; > + } else if (cam->pix_format.pixelformat == V4L2_PIX_FMT_YVU420) { > + mvb->yuv_p.y = dma_handle; > + mvb->yuv_p.v = mvb->yuv_p.y + base_size; > + mvb->yuv_p.u = mvb->yuv_p.v + base_size / 4; > + } else > + mvb->yuv_p.y = dma_handle; > + > list_add(&mvb->queue, &cam->buffers); > if (cam->state == S_STREAMING && test_bit(CF_SG_RESTART, &cam->flags)) > mcam_sg_restart(cam); > diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h > index 40368f6..3f75d7d 100755 > --- a/drivers/media/platform/marvell-ccic/mcam-core.h > +++ b/drivers/media/platform/marvell-ccic/mcam-core.h > @@ -233,6 +233,12 @@ int mccic_resume(struct mcam_camera *cam); > #define REG_Y0BAR 0x00 > #define REG_Y1BAR 0x04 > #define REG_Y2BAR 0x08 > +#define REG_U0BAR 0x0c > +#define REG_U1BAR 0x10 > +#define REG_U2BAR 0x14 > +#define REG_V0BAR 0x18 > +#define REG_V1BAR 0x1C > +#define REG_V2BAR 0x20 > > /* > * register definitions for MIPI support > -- > 1.7.9.5 Thanks Guennadi --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Thanks Albert Wang 86-21-61092656 >-----Original Message----- >From: Guennadi Liakhovetski [mailto:g.liakhovetski@gmx.de] >Sent: Tuesday, 27 November, 2012 19:45 >To: Albert Wang >Cc: corbet@lwn.net; linux-media@vger.kernel.org; Libin Yang >Subject: Re: [PATCH 06/15] [media] marvell-ccic: add new formats support for marvell-ccic >driver > >On Fri, 23 Nov 2012, Albert Wang wrote: > >> From: Libin Yang <lbyang@marvell.com> >> >> This patch adds the new formats support for marvell-ccic. >> >> Signed-off-by: Albert Wang <twang13@marvell.com> >> Signed-off-by: Libin Yang <lbyang@marvell.com> >> --- >> drivers/media/platform/marvell-ccic/mcam-core.c | 178 ++++++++++++++++++----- >> drivers/media/platform/marvell-ccic/mcam-core.h | 6 + >> 2 files changed, 151 insertions(+), 33 deletions(-) >> >> diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c >> b/drivers/media/platform/marvell-ccic/mcam-core.c >> index 67d4f2f..c9f7250 100755 >> --- a/drivers/media/platform/marvell-ccic/mcam-core.c >> +++ b/drivers/media/platform/marvell-ccic/mcam-core.c >> @@ -110,6 +110,30 @@ static struct mcam_format_struct { >> .bpp = 2, >> }, >> { >> + .desc = "UYVY 4:2:2", >> + .pixelformat = V4L2_PIX_FMT_UYVY, >> + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, >> + .bpp = 2, >> + }, >> + { >> + .desc = "YUV 4:2:2 PLANAR", >> + .pixelformat = V4L2_PIX_FMT_YUV422P, >> + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, >> + .bpp = 2, >> + }, >> + { >> + .desc = "YUV 4:2:0 PLANAR", >> + .pixelformat = V4L2_PIX_FMT_YUV420, >> + .mbus_code = V4L2_MBUS_FMT_YUYV8_1_5X8, >> + .bpp = 2, >> + }, >> + { >> + .desc = "YVU 4:2:0 PLANAR", >> + .pixelformat = V4L2_PIX_FMT_YVU420, >> + .mbus_code = V4L2_MBUS_FMT_YVYU8_1_5X8, >> + .bpp = 2, >> + }, >> + { >> .desc = "RGB 444", >> .pixelformat = V4L2_PIX_FMT_RGB444, >> .mbus_code = V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE, >> @@ -168,6 +192,12 @@ struct mcam_dma_desc { >> u32 segment_len; >> }; >> >> +struct yuv_pointer_t { >> + dma_addr_t y; >> + dma_addr_t u; >> + dma_addr_t v; >> +}; >> + >> /* >> * Our buffer type for working with videobuf2. Note that the vb2 >> * developers have decreed that struct vb2_buffer must be at the @@ >> -179,6 +209,7 @@ struct mcam_vb_buffer { >> struct mcam_dma_desc *dma_desc; /* Descriptor virtual address */ >> dma_addr_t dma_desc_pa; /* Descriptor physical address */ >> int dma_desc_nent; /* Number of mapped descriptors */ >> + struct yuv_pointer_t yuv_p; >> }; >> >> static inline struct mcam_vb_buffer *vb_to_mvb(struct vb2_buffer *vb) >> @@ -465,6 +496,18 @@ static inline int mcam_check_dma_buffers(struct >> mcam_camera *cam) >> /* >> * DMA-contiguous code. >> */ >> + >> +static bool mcam_fmt_is_planar(__u32 pfmt) { >> + switch (pfmt) { >> + case V4L2_PIX_FMT_YUV422P: >> + case V4L2_PIX_FMT_YUV420: >> + case V4L2_PIX_FMT_YVU420: >> + return true; >> + } >> + return false; >> +} >> + >> /* >> * Set up a contiguous buffer for the given frame. Here also is where >> * the underrun strategy is set: if there is no buffer available, >> reuse @@ -476,6 +519,8 @@ static inline int >> mcam_check_dma_buffers(struct mcam_camera *cam) static void >> mcam_set_contig_buffer(struct mcam_camera *cam, int frame) { >> struct mcam_vb_buffer *buf; >> + struct v4l2_pix_format *fmt = &cam->pix_format; >> + >> /* >> * If there are no available buffers, go into single mode >> */ >> @@ -494,8 +539,13 @@ static void mcam_set_contig_buffer(struct mcam_camera *cam, >int frame) >> } >> >> cam->vb_bufs[frame] = buf; >> - mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR, >> - vb2_dma_contig_plane_dma_addr(&buf->vb_buf, 0)); >> + mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR, buf->yuv_p.y); >> + if (mcam_fmt_is_planar(fmt->pixelformat)) { >> + mcam_reg_write(cam, frame == 0 ? >> + REG_U0BAR : REG_U1BAR, buf->yuv_p.u); >> + mcam_reg_write(cam, frame == 0 ? >> + REG_V0BAR : REG_V1BAR, buf->yuv_p.v); >> + } >> } >> >> /* >> @@ -653,49 +703,91 @@ static inline void mcam_sg_restart(struct mcam_camera >*cam) >> */ >> static void mcam_ctlr_image(struct mcam_camera *cam) { >> - int imgsz; >> struct v4l2_pix_format *fmt = &cam->pix_format; >> + u32 widthy = 0, widthuv = 0, imgsz_h, imgsz_w; >> + >> + cam_dbg(cam, "camera: bytesperline = %d; height = %d\n", >> + fmt->bytesperline, fmt->sizeimage / fmt->bytesperline); >> + imgsz_h = (fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK; >> + imgsz_w = fmt->bytesperline & IMGSZ_H_MASK; >> + >> + if (fmt->pixelformat == V4L2_PIX_FMT_YUV420 >> + || fmt->pixelformat == V4L2_PIX_FMT_YVU420) >> + imgsz_w = (fmt->bytesperline * 4 / 3) & IMGSZ_H_MASK; >> + else if (fmt->pixelformat == V4L2_PIX_FMT_JPEG) >> + imgsz_h = (fmt->sizeimage / fmt->bytesperline) << IMGSZ_V_SHIFT; >> + >> + switch (fmt->pixelformat) { >> + case V4L2_PIX_FMT_YUYV: >> + case V4L2_PIX_FMT_UYVY: >> + widthy = fmt->width * 2; >> + widthuv = fmt->width * 2; >> + break; > >I think, you can move imgsz_h and imgsz_w calculations from above to this switch too? > Sure, we can do it. >> + case V4L2_PIX_FMT_RGB565: >> + widthy = fmt->width * 2; >> + widthuv = 0; >> + break; >> + case V4L2_PIX_FMT_JPEG: >> + widthy = fmt->bytesperline; >> + widthuv = fmt->bytesperline; >> + break; >> + case V4L2_PIX_FMT_YUV422P: >> + case V4L2_PIX_FMT_YUV420: >> + case V4L2_PIX_FMT_YVU420: >> + widthy = fmt->width; >> + widthuv = fmt->width / 2; >> + break; >> + default: >> + break; >> + } >> + >> + mcam_reg_write_mask(cam, REG_IMGPITCH, widthuv << 16 | widthy, >> + IMGP_YP_MASK | IMGP_UVP_MASK); > >Hm, are you sure you're not breaking other currently supported pixel formats, like >V4L2_PIX_FMT_RGB444, V4L2_PIX_FMT_SBGGR8? > >> + mcam_reg_write(cam, REG_IMGSIZE, imgsz_h | imgsz_w); >> + mcam_reg_write(cam, REG_IMGOFFSET, 0x0); >> >> - imgsz = ((fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK) | >> - (fmt->bytesperline & IMGSZ_H_MASK); >> - mcam_reg_write(cam, REG_IMGSIZE, imgsz); >> - mcam_reg_write(cam, REG_IMGOFFSET, 0); >> - /* YPITCH just drops the last two bits */ >> - mcam_reg_write_mask(cam, REG_IMGPITCH, fmt->bytesperline, >> - IMGP_YP_MASK); > >Let's see. Before we had > > REG_IMGPITCH = fmt->bytesperline & 0x3ffc; > >after your change, say, for V4L2_PIX_FMT_YUYV (fmt->bytesperline = >fmt->width * 2), you get > > REG_IMGPITCH = ((fmt->bytesperline << 16) | fmt->bytesperline) & > 0x3ffc3ffc; > >Is this intentional? Doesn't widthuv have to be 0 for non-planar formats like >V4L2_PIX_FMT_YUYV? Please, always when you change existing code make sure the >original behaviour is preserved, unless there used to be a bug, in which case it should be >fixed by a separate patch. > I see. We will re-check this case carefully, and then give a update. Thanks for point it out. >> /* >> * Tell the controller about the image format we are using. >> */ >> - switch (cam->pix_format.pixelformat) { >> + switch (fmt->pixelformat) { >> + case V4L2_PIX_FMT_YUV422P: >> + mcam_reg_write_mask(cam, REG_CTRL0, >> + C0_DF_YUV | C0_YUV_PLANAR | C0_YUVE_YVYU, >C0_DF_MASK); >> + break; >> + case V4L2_PIX_FMT_YUV420: >> + case V4L2_PIX_FMT_YVU420: >> + mcam_reg_write_mask(cam, REG_CTRL0, >> + C0_DF_YUV | C0_YUV_420PL | C0_YUVE_YVYU, >C0_DF_MASK); >> + break; >> case V4L2_PIX_FMT_YUYV: >> - mcam_reg_write_mask(cam, REG_CTRL0, >> - C0_DF_YUV|C0_YUV_PACKED|C0_YUVE_YUYV, >> - C0_DF_MASK); >> - break; >> - >> + mcam_reg_write_mask(cam, REG_CTRL0, >> + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_UYVY, >C0_DF_MASK); >> + break; >> + case V4L2_PIX_FMT_UYVY: >> + mcam_reg_write_mask(cam, REG_CTRL0, >> + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_YUYV, >C0_DF_MASK); >> + break; >> + case V4L2_PIX_FMT_JPEG: >> + mcam_reg_write_mask(cam, REG_CTRL0, >> + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_YUYV, >C0_DF_MASK); >> + break; >> case V4L2_PIX_FMT_RGB444: >> - mcam_reg_write_mask(cam, REG_CTRL0, >> - C0_DF_RGB|C0_RGBF_444|C0_RGB4_XRGB, >> - C0_DF_MASK); >> - /* Alpha value? */ > >Unless you have a specific reason, you could just as well preserve the comment. > OK. We can keep this comments, just adjust the code format for aligning with others. >> - break; >> - >> + mcam_reg_write_mask(cam, REG_CTRL0, >> + C0_DF_RGB | C0_RGBF_444 | C0_RGB4_XRGB, C0_DF_MASK); >> + break; >> case V4L2_PIX_FMT_RGB565: >> - mcam_reg_write_mask(cam, REG_CTRL0, >> - C0_DF_RGB|C0_RGBF_565|C0_RGB5_BGGR, >> - C0_DF_MASK); >> - break; >> - >> + mcam_reg_write_mask(cam, REG_CTRL0, >> + C0_DF_RGB | C0_RGBF_565 | C0_RGB5_BGGR, >C0_DF_MASK); >> + break; >> default: >> - cam_err(cam, "Unknown format %x\n", cam->pix_format.pixelformat); >> - break; >> + cam_err(cam, "camera: unknown format: %c\n", fmt->pixelformat); > >Don't think "%c" will produce a meaningful result here. > Sorry, should be %u or %x. >> + break; >> } >> + >> /* >> * Make sure it knows we want to use hsync/vsync. >> */ >> - mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, >> - C0_SIFM_MASK); >> - >> + mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, C0_SIFM_MASK); >> /* >> * This field controls the generation of EOF(DVP only) >> */ >> @@ -706,7 +798,6 @@ static void mcam_ctlr_image(struct mcam_camera *cam) >> } >> } >> >> - >> /* >> * Configure the controller for operation; caller holds the >> * device mutex. >> @@ -979,11 +1070,32 @@ static void mcam_vb_buf_queue(struct vb2_buffer >> *vb) { >> struct mcam_vb_buffer *mvb = vb_to_mvb(vb); >> struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); >> + struct v4l2_pix_format *fmt = &cam->pix_format; >> unsigned long flags; >> int start; >> + dma_addr_t dma_handle; >> + u32 base_size = fmt->width * fmt->height; > >Shouldn't you be just using bytesperline? Is stride != width * height supported? > We will update it. >> >> spin_lock_irqsave(&cam->dev_lock, flags); >> + dma_handle = vb2_dma_contig_plane_dma_addr(vb, 0); >> + BUG_ON(!dma_handle); >> start = (cam->state == S_BUFWAIT) && !list_empty(&cam->buffers); >> + >> + if (cam->pix_format.pixelformat == V4L2_PIX_FMT_YUV422P) { > >Better use a "switch." > OK. >> + mvb->yuv_p.y = dma_handle; >> + mvb->yuv_p.u = mvb->yuv_p.y + base_size; >> + mvb->yuv_p.v = mvb->yuv_p.u + base_size / 2; >> + } else if (cam->pix_format.pixelformat == V4L2_PIX_FMT_YUV420) { >> + mvb->yuv_p.y = dma_handle; >> + mvb->yuv_p.u = mvb->yuv_p.y + base_size; >> + mvb->yuv_p.v = mvb->yuv_p.u + base_size / 4; >> + } else if (cam->pix_format.pixelformat == V4L2_PIX_FMT_YVU420) { >> + mvb->yuv_p.y = dma_handle; >> + mvb->yuv_p.v = mvb->yuv_p.y + base_size; >> + mvb->yuv_p.u = mvb->yuv_p.v + base_size / 4; >> + } else >> + mvb->yuv_p.y = dma_handle; >> + >> list_add(&mvb->queue, &cam->buffers); >> if (cam->state == S_STREAMING && test_bit(CF_SG_RESTART, &cam->flags)) >> mcam_sg_restart(cam); >> diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h >> b/drivers/media/platform/marvell-ccic/mcam-core.h >> index 40368f6..3f75d7d 100755 >> --- a/drivers/media/platform/marvell-ccic/mcam-core.h >> +++ b/drivers/media/platform/marvell-ccic/mcam-core.h >> @@ -233,6 +233,12 @@ int mccic_resume(struct mcam_camera *cam); >> #define REG_Y0BAR 0x00 >> #define REG_Y1BAR 0x04 >> #define REG_Y2BAR 0x08 >> +#define REG_U0BAR 0x0c >> +#define REG_U1BAR 0x10 >> +#define REG_U2BAR 0x14 >> +#define REG_V0BAR 0x18 >> +#define REG_V1BAR 0x1C >> +#define REG_V2BAR 0x20 >> >> /* >> * register definitions for MIPI support >> -- >> 1.7.9.5 > >Thanks >Guennadi >--- >Guennadi Liakhovetski, Ph.D. >Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Guennadi, When I'm refining the patch based on your comments, I met an issue. Could you please help me? [snip] >>> - >>> /* >>> * Configure the controller for operation; caller holds the >>> * device mutex. >>> @@ -979,11 +1070,32 @@ static void mcam_vb_buf_queue(struct vb2_buffer >>> *vb) { >>> struct mcam_vb_buffer *mvb = vb_to_mvb(vb); >>> struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); >>> + struct v4l2_pix_format *fmt = &cam->pix_format; >>> unsigned long flags; >>> int start; >>> + dma_addr_t dma_handle; >>> + u32 base_size = fmt->width * fmt->height; >> >>Shouldn't you be just using bytesperline? Is stride != width * height supported? >> >We will update it. [Libin] What I understand is width is the pixel number perline, so bytesperline = width * BytePerPixel. This means bytesperline should include Y data and UV data. For example, for yuv420 legacy 8-bit, it transfers like below: U Y Y U Y Y U Y Y U Y Y ...... V Y Y V Y Y V Y Y V Y Y ...... As each Y is one byte, so all Y data length is nuber_Y_per_line * height. While the nuber_Y_per_line is the pixel_per_line, which is fmt->width. So for the planner, the first block is saving the Y data, whose length is nuber_Y_per_line * height, which equals to fmt->width * height. Do I understand correctly? The base_size here means the size of Y data, so it should be fmt->width * fmt->height. >>> >>> spin_lock_irqsave(&cam->dev_lock, flags); >>> + dma_handle = vb2_dma_contig_plane_dma_addr(vb, 0); Best Regards, Libin -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Libin On Mon, 3 Dec 2012, Libin Yang wrote: > Hi Guennadi, > > When I'm refining the patch based on your comments, I met an issue. > Could you please help me? > > [snip] > > > >>> - > >>> /* > >>> * Configure the controller for operation; caller holds the > >>> * device mutex. > >>> @@ -979,11 +1070,32 @@ static void mcam_vb_buf_queue(struct vb2_buffer > >>> *vb) { > >>> struct mcam_vb_buffer *mvb = vb_to_mvb(vb); > >>> struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); > >>> + struct v4l2_pix_format *fmt = &cam->pix_format; > >>> unsigned long flags; > >>> int start; > >>> + dma_addr_t dma_handle; > >>> + u32 base_size = fmt->width * fmt->height; > >> > >>Shouldn't you be just using bytesperline? Is stride != width * height supported? > >> > >We will update it. > > [Libin] What I understand is width is the pixel number perline, so > bytesperline = width * BytePerPixel. This means bytesperline should > include Y data and UV data. > > For example, for yuv420 legacy 8-bit, it transfers like below: > U Y Y U Y Y U Y Y U Y Y ...... > V Y Y V Y Y V Y Y V Y Y ...... > > As each Y is one byte, so all Y data length is nuber_Y_per_line * > height. While the nuber_Y_per_line is the pixel_per_line, which is > fmt->width. > > So for the planner, the first block is saving the Y data, whose length > is nuber_Y_per_line * height, which equals to fmt->width * height. > > Do I understand correctly? > > The base_size here means the size of Y data, so it should be fmt->width > * fmt->height. Right, in this case you're right. Sorry for a misleading comment. Just a suggestion, if you prefer, you can keep the name, but maybe a name like pixel_count or pixel_num or pixel_per_frame would be clearer for that variable? But keeping the name is also ok with me. > >>> > >>> spin_lock_irqsave(&cam->dev_lock, flags); > >>> + dma_handle = vb2_dma_contig_plane_dma_addr(vb, 0); Thanks Guennadi --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Guennadi, >-----Original Message----- >From: Guennadi Liakhovetski [mailto:g.liakhovetski@gmx.de] >Sent: Tuesday, December 04, 2012 2:57 PM >To: Libin Yang >Cc: corbet@lwn.net; linux-media@vger.kernel.org >Subject: RE: [PATCH 06/15] [media] marvell-ccic: add new formats support for marvell-ccic >driver > >Hi Libin > >On Mon, 3 Dec 2012, Libin Yang wrote: > >> Hi Guennadi, >> >> When I'm refining the patch based on your comments, I met an issue. >> Could you please help me? >> >> [snip] >> >> >> >>> - >> >>> /* >> >>> * Configure the controller for operation; caller holds the >> >>> * device mutex. >> >>> @@ -979,11 +1070,32 @@ static void mcam_vb_buf_queue(struct vb2_buffer >> >>> *vb) { >> >>> struct mcam_vb_buffer *mvb = vb_to_mvb(vb); >> >>> struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); >> >>> + struct v4l2_pix_format *fmt = &cam->pix_format; >> >>> unsigned long flags; >> >>> int start; >> >>> + dma_addr_t dma_handle; >> >>> + u32 base_size = fmt->width * fmt->height; >> >> >> >>Shouldn't you be just using bytesperline? Is stride != width * height supported? >> >> >> >We will update it. >> >> [Libin] What I understand is width is the pixel number perline, so >> bytesperline = width * BytePerPixel. This means bytesperline should >> include Y data and UV data. >> >> For example, for yuv420 legacy 8-bit, it transfers like below: >> U Y Y U Y Y U Y Y U Y Y ...... >> V Y Y V Y Y V Y Y V Y Y ...... >> >> As each Y is one byte, so all Y data length is nuber_Y_per_line * >> height. While the nuber_Y_per_line is the pixel_per_line, which is >> fmt->width. >> >> So for the planner, the first block is saving the Y data, whose length >> is nuber_Y_per_line * height, which equals to fmt->width * height. >> >> Do I understand correctly? >> >> The base_size here means the size of Y data, so it should be fmt->width >> * fmt->height. > >Right, in this case you're right. Sorry for a misleading comment. Just a >suggestion, if you prefer, you can keep the name, but maybe a name like >pixel_count or pixel_num or pixel_per_frame would be clearer for that >variable? But keeping the name is also ok with me. > [Libin] OK, I see. Thanks for your suggestion. The name really seems a little misleading. I will use a more reasonable name in the coming patch. >> >>> >> >>> spin_lock_irqsave(&cam->dev_lock, flags); >> >>> + dma_handle = vb2_dma_contig_plane_dma_addr(vb, 0); > >Thanks >Guennadi >--- >Guennadi Liakhovetski, Ph.D. >Freelance Open-Source Software Developer >http://www.open-technology.de/ Regards, Libin -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c index 67d4f2f..c9f7250 100755 --- a/drivers/media/platform/marvell-ccic/mcam-core.c +++ b/drivers/media/platform/marvell-ccic/mcam-core.c @@ -110,6 +110,30 @@ static struct mcam_format_struct { .bpp = 2, }, { + .desc = "UYVY 4:2:2", + .pixelformat = V4L2_PIX_FMT_UYVY, + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, + .bpp = 2, + }, + { + .desc = "YUV 4:2:2 PLANAR", + .pixelformat = V4L2_PIX_FMT_YUV422P, + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, + .bpp = 2, + }, + { + .desc = "YUV 4:2:0 PLANAR", + .pixelformat = V4L2_PIX_FMT_YUV420, + .mbus_code = V4L2_MBUS_FMT_YUYV8_1_5X8, + .bpp = 2, + }, + { + .desc = "YVU 4:2:0 PLANAR", + .pixelformat = V4L2_PIX_FMT_YVU420, + .mbus_code = V4L2_MBUS_FMT_YVYU8_1_5X8, + .bpp = 2, + }, + { .desc = "RGB 444", .pixelformat = V4L2_PIX_FMT_RGB444, .mbus_code = V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE, @@ -168,6 +192,12 @@ struct mcam_dma_desc { u32 segment_len; }; +struct yuv_pointer_t { + dma_addr_t y; + dma_addr_t u; + dma_addr_t v; +}; + /* * Our buffer type for working with videobuf2. Note that the vb2 * developers have decreed that struct vb2_buffer must be at the @@ -179,6 +209,7 @@ struct mcam_vb_buffer { struct mcam_dma_desc *dma_desc; /* Descriptor virtual address */ dma_addr_t dma_desc_pa; /* Descriptor physical address */ int dma_desc_nent; /* Number of mapped descriptors */ + struct yuv_pointer_t yuv_p; }; static inline struct mcam_vb_buffer *vb_to_mvb(struct vb2_buffer *vb) @@ -465,6 +496,18 @@ static inline int mcam_check_dma_buffers(struct mcam_camera *cam) /* * DMA-contiguous code. */ + +static bool mcam_fmt_is_planar(__u32 pfmt) +{ + switch (pfmt) { + case V4L2_PIX_FMT_YUV422P: + case V4L2_PIX_FMT_YUV420: + case V4L2_PIX_FMT_YVU420: + return true; + } + return false; +} + /* * Set up a contiguous buffer for the given frame. Here also is where * the underrun strategy is set: if there is no buffer available, reuse @@ -476,6 +519,8 @@ static inline int mcam_check_dma_buffers(struct mcam_camera *cam) static void mcam_set_contig_buffer(struct mcam_camera *cam, int frame) { struct mcam_vb_buffer *buf; + struct v4l2_pix_format *fmt = &cam->pix_format; + /* * If there are no available buffers, go into single mode */ @@ -494,8 +539,13 @@ static void mcam_set_contig_buffer(struct mcam_camera *cam, int frame) } cam->vb_bufs[frame] = buf; - mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR, - vb2_dma_contig_plane_dma_addr(&buf->vb_buf, 0)); + mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR, buf->yuv_p.y); + if (mcam_fmt_is_planar(fmt->pixelformat)) { + mcam_reg_write(cam, frame == 0 ? + REG_U0BAR : REG_U1BAR, buf->yuv_p.u); + mcam_reg_write(cam, frame == 0 ? + REG_V0BAR : REG_V1BAR, buf->yuv_p.v); + } } /* @@ -653,49 +703,91 @@ static inline void mcam_sg_restart(struct mcam_camera *cam) */ static void mcam_ctlr_image(struct mcam_camera *cam) { - int imgsz; struct v4l2_pix_format *fmt = &cam->pix_format; + u32 widthy = 0, widthuv = 0, imgsz_h, imgsz_w; + + cam_dbg(cam, "camera: bytesperline = %d; height = %d\n", + fmt->bytesperline, fmt->sizeimage / fmt->bytesperline); + imgsz_h = (fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK; + imgsz_w = fmt->bytesperline & IMGSZ_H_MASK; + + if (fmt->pixelformat == V4L2_PIX_FMT_YUV420 + || fmt->pixelformat == V4L2_PIX_FMT_YVU420) + imgsz_w = (fmt->bytesperline * 4 / 3) & IMGSZ_H_MASK; + else if (fmt->pixelformat == V4L2_PIX_FMT_JPEG) + imgsz_h = (fmt->sizeimage / fmt->bytesperline) << IMGSZ_V_SHIFT; + + switch (fmt->pixelformat) { + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + widthy = fmt->width * 2; + widthuv = fmt->width * 2; + break; + case V4L2_PIX_FMT_RGB565: + widthy = fmt->width * 2; + widthuv = 0; + break; + case V4L2_PIX_FMT_JPEG: + widthy = fmt->bytesperline; + widthuv = fmt->bytesperline; + break; + case V4L2_PIX_FMT_YUV422P: + case V4L2_PIX_FMT_YUV420: + case V4L2_PIX_FMT_YVU420: + widthy = fmt->width; + widthuv = fmt->width / 2; + break; + default: + break; + } + + mcam_reg_write_mask(cam, REG_IMGPITCH, widthuv << 16 | widthy, + IMGP_YP_MASK | IMGP_UVP_MASK); + mcam_reg_write(cam, REG_IMGSIZE, imgsz_h | imgsz_w); + mcam_reg_write(cam, REG_IMGOFFSET, 0x0); - imgsz = ((fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK) | - (fmt->bytesperline & IMGSZ_H_MASK); - mcam_reg_write(cam, REG_IMGSIZE, imgsz); - mcam_reg_write(cam, REG_IMGOFFSET, 0); - /* YPITCH just drops the last two bits */ - mcam_reg_write_mask(cam, REG_IMGPITCH, fmt->bytesperline, - IMGP_YP_MASK); /* * Tell the controller about the image format we are using. */ - switch (cam->pix_format.pixelformat) { + switch (fmt->pixelformat) { + case V4L2_PIX_FMT_YUV422P: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_YUV | C0_YUV_PLANAR | C0_YUVE_YVYU, C0_DF_MASK); + break; + case V4L2_PIX_FMT_YUV420: + case V4L2_PIX_FMT_YVU420: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_YUV | C0_YUV_420PL | C0_YUVE_YVYU, C0_DF_MASK); + break; case V4L2_PIX_FMT_YUYV: - mcam_reg_write_mask(cam, REG_CTRL0, - C0_DF_YUV|C0_YUV_PACKED|C0_YUVE_YUYV, - C0_DF_MASK); - break; - + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_UYVY, C0_DF_MASK); + break; + case V4L2_PIX_FMT_UYVY: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_YUYV, C0_DF_MASK); + break; + case V4L2_PIX_FMT_JPEG: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_YUYV, C0_DF_MASK); + break; case V4L2_PIX_FMT_RGB444: - mcam_reg_write_mask(cam, REG_CTRL0, - C0_DF_RGB|C0_RGBF_444|C0_RGB4_XRGB, - C0_DF_MASK); - /* Alpha value? */ - break; - + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_RGB | C0_RGBF_444 | C0_RGB4_XRGB, C0_DF_MASK); + break; case V4L2_PIX_FMT_RGB565: - mcam_reg_write_mask(cam, REG_CTRL0, - C0_DF_RGB|C0_RGBF_565|C0_RGB5_BGGR, - C0_DF_MASK); - break; - + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_RGB | C0_RGBF_565 | C0_RGB5_BGGR, C0_DF_MASK); + break; default: - cam_err(cam, "Unknown format %x\n", cam->pix_format.pixelformat); - break; + cam_err(cam, "camera: unknown format: %c\n", fmt->pixelformat); + break; } + /* * Make sure it knows we want to use hsync/vsync. */ - mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, - C0_SIFM_MASK); - + mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, C0_SIFM_MASK); /* * This field controls the generation of EOF(DVP only) */ @@ -706,7 +798,6 @@ static void mcam_ctlr_image(struct mcam_camera *cam) } } - /* * Configure the controller for operation; caller holds the * device mutex. @@ -979,11 +1070,32 @@ static void mcam_vb_buf_queue(struct vb2_buffer *vb) { struct mcam_vb_buffer *mvb = vb_to_mvb(vb); struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); + struct v4l2_pix_format *fmt = &cam->pix_format; unsigned long flags; int start; + dma_addr_t dma_handle; + u32 base_size = fmt->width * fmt->height; spin_lock_irqsave(&cam->dev_lock, flags); + dma_handle = vb2_dma_contig_plane_dma_addr(vb, 0); + BUG_ON(!dma_handle); start = (cam->state == S_BUFWAIT) && !list_empty(&cam->buffers); + + if (cam->pix_format.pixelformat == V4L2_PIX_FMT_YUV422P) { + mvb->yuv_p.y = dma_handle; + mvb->yuv_p.u = mvb->yuv_p.y + base_size; + mvb->yuv_p.v = mvb->yuv_p.u + base_size / 2; + } else if (cam->pix_format.pixelformat == V4L2_PIX_FMT_YUV420) { + mvb->yuv_p.y = dma_handle; + mvb->yuv_p.u = mvb->yuv_p.y + base_size; + mvb->yuv_p.v = mvb->yuv_p.u + base_size / 4; + } else if (cam->pix_format.pixelformat == V4L2_PIX_FMT_YVU420) { + mvb->yuv_p.y = dma_handle; + mvb->yuv_p.v = mvb->yuv_p.y + base_size; + mvb->yuv_p.u = mvb->yuv_p.v + base_size / 4; + } else + mvb->yuv_p.y = dma_handle; + list_add(&mvb->queue, &cam->buffers); if (cam->state == S_STREAMING && test_bit(CF_SG_RESTART, &cam->flags)) mcam_sg_restart(cam); diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h index 40368f6..3f75d7d 100755 --- a/drivers/media/platform/marvell-ccic/mcam-core.h +++ b/drivers/media/platform/marvell-ccic/mcam-core.h @@ -233,6 +233,12 @@ int mccic_resume(struct mcam_camera *cam); #define REG_Y0BAR 0x00 #define REG_Y1BAR 0x04 #define REG_Y2BAR 0x08 +#define REG_U0BAR 0x0c +#define REG_U1BAR 0x10 +#define REG_U2BAR 0x14 +#define REG_V0BAR 0x18 +#define REG_V1BAR 0x1C +#define REG_V2BAR 0x20 /* * register definitions for MIPI support