@@ -597,6 +597,8 @@ static int af9035_read_config(struct dvb_usb_device *d)
/* disable dual mode if driver does not support it */
if (i == 1)
switch (tmp) {
+ case AF9033_TUNER_FC0012:
+ break;
default:
state->dual_mode = false;
dev_info(&d->udev->dev, "%s: driver does not " \
@@ -900,10 +902,18 @@ static const struct fc2580_config af9035_fc2580_config = {
.clock = 16384000,
};
-static const struct fc0012_config af9035_fc0012_config = {
- .i2c_address = 0x63,
- .xtal_freq = FC_XTAL_36_MHZ,
- .dual_master = 1,
+static const struct fc0012_config af9035_fc0012_config[] = {
+ {
+ .i2c_address = 0x63,
+ .xtal_freq = FC_XTAL_36_MHZ,
+ .dual_master = 1,
+ .loop_through = true,
+ .clock_out = true,
+ }, {
+ .i2c_address = 0x63 | 0x80, /* I2C bus select hack */
+ .xtal_freq = FC_XTAL_36_MHZ,
+ .dual_master = 1,
+ }
};
static int af9035_tuner_attach(struct dvb_usb_adapter *adap)
@@ -912,6 +922,7 @@ static int af9035_tuner_attach(struct dvb_usb_adapter *adap)
struct dvb_usb_device *d = adap_to_d(adap);
int ret;
struct dvb_frontend *fe;
+ struct i2c_msg msg[1];
u8 tuner_addr;
/*
* XXX: Hack used in that function: we abuse unused I2C address bit [7]
@@ -1034,23 +1045,38 @@ static int af9035_tuner_attach(struct dvb_usb_adapter *adap)
* my test I didn't find any difference.
*/
- /* configure gpiot2 as output and high */
- ret = af9035_wr_reg_mask(d, 0xd8eb, 0x01, 0x01);
- if (ret < 0)
- goto err;
+ if (adap->id == 0) {
+ /* configure gpiot2 as output and high */
+ ret = af9035_wr_reg_mask(d, 0xd8eb, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
- ret = af9035_wr_reg_mask(d, 0xd8ec, 0x01, 0x01);
- if (ret < 0)
- goto err;
+ ret = af9035_wr_reg_mask(d, 0xd8ec, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
- ret = af9035_wr_reg_mask(d, 0xd8ed, 0x01, 0x01);
- if (ret < 0)
- goto err;
+ ret = af9035_wr_reg_mask(d, 0xd8ed, 0x01, 0x01);
+ if (ret < 0)
+ goto err;
+ } else {
+ /*
+ * FIXME: That belongs for the FC0012 driver.
+ * Write 02 to FC0012 master tuner register 0d directly
+ * in order to make slave tuner working.
+ */
+ msg[0].addr = 0x63;
+ msg[0].flags = 0;
+ msg[0].len = 2;
+ msg[0].buf = "\x0d\x02";
+ ret = i2c_transfer(&d->i2c_adap, msg, 1);
+ if (ret < 0)
+ goto err;
+ }
usleep_range(10000, 50000);
fe = dvb_attach(fc0012_attach, adap->fe[0], &d->i2c_adap,
- &af9035_fc0012_config);
+ &af9035_fc0012_config[adap->id]);
break;
default:
fe = NULL;
That adds support for AF9035 dual devices having FC0012 tuners. Signed-off-by: Antti Palosaari <crope@iki.fi> --- drivers/media/usb/dvb-usb-v2/af9035.c | 56 +++++++++++++++++++++++++---------- 1 file changed, 41 insertions(+), 15 deletions(-)