[4/4] em28xx: add image quality bridge controls

Commit Message

Frank Schäfer Feb. 11, 2013, 5:48 p.m. UTC

Add the image quality bridge controls contrast, brightness, saturation,
blue balance, red balance and sharpness.
These controls are enabled only if no subdevice provides them.

Tested with the following devices:
"Terratec Cinergy 200 USB"
"Hauppauge HVR-900"
"SilverCrest 1.3MPix webcam"
"Hauppauge WinTV USB2"
"Speedlink VAD Laplace webcam"


Signed-off-by: Frank Schäfer <[e-mail]>
---
 drivers/media/usb/em28xx/em28xx-cards.c |    7 +---
 drivers/media/usb/em28xx/em28xx-video.c |   58 +++++++++++++++++++++++++++++--
 2 Dateien geändert, 57 Zeilen hinzugefügt(+), 8 Zeilen entfernt(-)

Patch

diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 0a5aa62..96de831 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -3089,7 +3089,7 @@  static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 		return retval;
 	}
 
-	v4l2_ctrl_handler_init(hdl, 4);
+	v4l2_ctrl_handler_init(hdl, 8);
 	dev->v4l2_dev.ctrl_handler = hdl;
 
 	/* register i2c bus */
@@ -3158,11 +3158,6 @@  static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 		msleep(3);
 	}
 
-	v4l2_ctrl_handler_setup(&dev->ctrl_handler);
-	retval = dev->ctrl_handler.error;
-	if (retval)
-		goto fail;
-
 	retval = em28xx_register_analog_devices(dev);
 	if (retval < 0) {
 		goto fail;
diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c
index 86fd907..48b937d 100644
--- a/drivers/media/usb/em28xx/em28xx-video.c
+++ b/drivers/media/usb/em28xx/em28xx-video.c
@@ -782,17 +782,38 @@  void em28xx_ctrl_notify(struct v4l2_ctrl *ctrl, void *priv)
 static int em28xx_s_ctrl(struct v4l2_ctrl *ctrl)
 {
 	struct em28xx *dev = container_of(ctrl->handler, struct em28xx, ctrl_handler);
+	int ret = -EINVAL;
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUDIO_MUTE:
 		dev->mute = ctrl->val;
+		ret = em28xx_audio_analog_set(dev);
 		break;
 	case V4L2_CID_AUDIO_VOLUME:
 		dev->volume = ctrl->val;
+		ret = em28xx_audio_analog_set(dev);
+		break;
+	case V4L2_CID_CONTRAST:
+		ret = em28xx_write_reg(dev, EM28XX_R20_YGAIN, ctrl->val);
+		break;
+	case V4L2_CID_BRIGHTNESS:
+		ret = em28xx_write_reg(dev, EM28XX_R21_YOFFSET, ctrl->val);
+		break;
+	case V4L2_CID_SATURATION:
+		ret = em28xx_write_reg(dev, EM28XX_R22_UVGAIN, ctrl->val);
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		ret = em28xx_write_reg(dev, EM28XX_R23_UOFFSET, ctrl->val);
+		break;
+	case V4L2_CID_RED_BALANCE:
+		ret = em28xx_write_reg(dev, EM28XX_R24_VOFFSET, ctrl->val);
+		break;
+	case V4L2_CID_SHARPNESS:
+		ret = em28xx_write_reg(dev, EM28XX_R25_SHARPNESS, ctrl->val);
 		break;
 	}
 
-	return em28xx_audio_analog_set(dev);
+	return (ret < 0) ? ret : 0;
 }
 
 const struct v4l2_ctrl_ops em28xx_ctrl_ops = {
@@ -1784,9 +1805,42 @@  int em28xx_register_analog_devices(struct em28xx *dev)
 			 (EM28XX_XCLK_AUDIO_UNMUTE | val));
 
 	em28xx_set_outfmt(dev);
-	em28xx_colorlevels_set_default(dev);
 	em28xx_compression_disable(dev);
 
+	/* Add image controls */
+	/* NOTE: at this point, the subdevices are already registered, so bridge
+	 * controls are only added/enabled when no subdevice provides them */
+	if (NULL == v4l2_ctrl_find(&dev->ctrl_handler, V4L2_CID_CONTRAST))
+		v4l2_ctrl_new_std(&dev->ctrl_handler, &em28xx_ctrl_ops,
+				  V4L2_CID_CONTRAST,
+				  0, 0x1f, 1, CONTRAST_DEFAULT);
+	if (NULL == v4l2_ctrl_find(&dev->ctrl_handler, V4L2_CID_BRIGHTNESS))
+		v4l2_ctrl_new_std(&dev->ctrl_handler, &em28xx_ctrl_ops,
+				  V4L2_CID_BRIGHTNESS,
+				  -0x80, 0x7f, 1, BRIGHTNESS_DEFAULT);
+	if (NULL == v4l2_ctrl_find(&dev->ctrl_handler, V4L2_CID_SATURATION))
+		v4l2_ctrl_new_std(&dev->ctrl_handler, &em28xx_ctrl_ops,
+				  V4L2_CID_SATURATION,
+				  0, 0x1f, 1, SATURATION_DEFAULT);
+	if (NULL == v4l2_ctrl_find(&dev->ctrl_handler, V4L2_CID_BLUE_BALANCE))
+		v4l2_ctrl_new_std(&dev->ctrl_handler, &em28xx_ctrl_ops,
+				  V4L2_CID_BLUE_BALANCE,
+				  -0x30, 0x30, 1, BLUE_BALANCE_DEFAULT);
+	if (NULL == v4l2_ctrl_find(&dev->ctrl_handler, V4L2_CID_RED_BALANCE))
+		v4l2_ctrl_new_std(&dev->ctrl_handler, &em28xx_ctrl_ops,
+				  V4L2_CID_RED_BALANCE,
+				  -0x30, 0x30, 1, RED_BALANCE_DEFAULT);
+	if (NULL == v4l2_ctrl_find(&dev->ctrl_handler, V4L2_CID_SHARPNESS))
+		v4l2_ctrl_new_std(&dev->ctrl_handler, &em28xx_ctrl_ops,
+				  V4L2_CID_SHARPNESS,
+				  0, 0x0f, 1, SHARPNESS_DEFAULT);
+
+	/* Reset image controls */
+	em28xx_colorlevels_set_default(dev);
+	v4l2_ctrl_handler_setup(&dev->ctrl_handler);
+	if (dev->ctrl_handler.error)
+		return dev->ctrl_handler.error;
+
 	/* allocate and fill video video_device struct */
 	dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
 	if (!dev->vdev) {