new file mode 100644
@@ -0,0 +1,1553 @@
+/*
+ * drivers/mfd/si476x-cmd.c -- Subroutines implementing command
+ * protocol of si476x series of chips
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/atomic.h>
+#include <linux/i2c.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/videodev2.h>
+
+#include <media/si476x.h>
+#include <linux/mfd/si476x-core.h>
+
+#define msb(x) ((u8)((u16) x >> 8))
+#define lsb(x) ((u8)((u16) x & 0x00FF))
+
+
+
+#define CMD_POWER_UP 0x01
+#define CMD_POWER_UP_A10_NRESP 1
+#define CMD_POWER_UP_A10_NARGS 5
+
+#define CMD_POWER_UP_A20_NRESP 1
+#define CMD_POWER_UP_A20_NARGS 5
+
+#define POWER_UP_DELAY_MS 110
+
+#define CMD_POWER_DOWN 0x11
+#define CMD_POWER_DOWN_A10_NRESP 1
+
+#define CMD_POWER_DOWN_A20_NRESP 1
+#define CMD_POWER_DOWN_A20_NARGS 1
+
+#define CMD_FUNC_INFO 0x12
+#define CMD_FUNC_INFO_NRESP 7
+
+#define CMD_SET_PROPERTY 0x13
+#define CMD_SET_PROPERTY_NARGS 5
+#define CMD_SET_PROPERTY_NRESP 1
+
+#define CMD_GET_PROPERTY 0x14
+#define CMD_GET_PROPERTY_NARGS 3
+#define CMD_GET_PROPERTY_NRESP 4
+
+#define CMD_AGC_STATUS 0x17
+#define CMD_AGC_STATUS_NRESP_A10 2
+#define CMD_AGC_STATUS_NRESP_A20 6
+
+#define PIN_CFG_BYTE(x) (0x7F & (x))
+#define CMD_DIG_AUDIO_PIN_CFG 0x18
+#define CMD_DIG_AUDIO_PIN_CFG_NARGS 4
+#define CMD_DIG_AUDIO_PIN_CFG_NRESP 5
+
+#define CMD_ZIF_PIN_CFG 0x19
+#define CMD_ZIF_PIN_CFG_NARGS 4
+#define CMD_ZIF_PIN_CFG_NRESP 5
+
+#define CMD_IC_LINK_GPO_CTL_PIN_CFG 0x1A
+#define CMD_IC_LINK_GPO_CTL_PIN_CFG_NARGS 4
+#define CMD_IC_LINK_GPO_CTL_PIN_CFG_NRESP 5
+
+#define CMD_ANA_AUDIO_PIN_CFG 0x1B
+#define CMD_ANA_AUDIO_PIN_CFG_NARGS 1
+#define CMD_ANA_AUDIO_PIN_CFG_NRESP 2
+
+#define CMD_INTB_PIN_CFG 0x1C
+#define CMD_INTB_PIN_CFG_NARGS 2
+#define CMD_INTB_PIN_CFG_A10_NRESP 6
+#define CMD_INTB_PIN_CFG_A20_NRESP 3
+
+#define CMD_FM_TUNE_FREQ 0x30
+#define CMD_FM_TUNE_FREQ_A10_NARGS 5
+#define CMD_FM_TUNE_FREQ_A20_NARGS 3
+#define CMD_FM_TUNE_FREQ_NRESP 1
+
+#define CMD_FM_RSQ_STATUS 0x32
+
+#define CMD_FM_RSQ_STATUS_A10_NARGS 1
+#define CMD_FM_RSQ_STATUS_A10_NRESP 17
+#define CMD_FM_RSQ_STATUS_A30_NARGS 1
+#define CMD_FM_RSQ_STATUS_A30_NRESP 23
+
+
+#define CMD_FM_SEEK_START 0x31
+#define CMD_FM_SEEK_START_NARGS 1
+#define CMD_FM_SEEK_START_NRESP 1
+
+#define CMD_FM_RDS_STATUS 0x36
+#define CMD_FM_RDS_STATUS_NARGS 1
+#define CMD_FM_RDS_STATUS_NRESP 16
+
+#define CMD_FM_RDS_BLOCKCOUNT 0x37
+#define CMD_FM_RDS_BLOCKCOUNT_NARGS 1
+#define CMD_FM_RDS_BLOCKCOUNT_NRESP 8
+
+#define CMD_FM_PHASE_DIVERSITY 0x38
+#define CMD_FM_PHASE_DIVERSITY_NARGS 1
+#define CMD_FM_PHASE_DIVERSITY_NRESP 1
+
+#define CMD_FM_PHASE_DIV_STATUS 0x39
+#define CMD_FM_PHASE_DIV_STATUS_NRESP 2
+
+#define CMD_AM_TUNE_FREQ 0x40
+#define CMD_AM_TUNE_FREQ_NARGS 3
+#define CMD_AM_TUNE_FREQ_NRESP 1
+
+#define CMD_AM_RSQ_STATUS 0x42
+#define CMD_AM_RSQ_STATUS_NARGS 1
+#define CMD_AM_RSQ_STATUS_NRESP 13
+
+#define CMD_AM_SEEK_START 0x41
+#define CMD_AM_SEEK_START_NARGS 1
+#define CMD_AM_SEEK_START_NRESP 1
+
+
+#define CMD_AM_ACF_STATUS 0x45
+#define CMD_AM_ACF_STATUS_NRESP 6
+#define CMD_AM_ACF_STATUS_NARGS 1
+
+#define CMD_FM_ACF_STATUS 0x35
+#define CMD_FM_ACF_STATUS_NRESP 8
+#define CMD_FM_ACF_STATUS_NARGS 1
+
+#define CMD_MAX_ARGS_COUNT (10)
+
+
+enum si476x_acf_status_report_bits {
+ SI476X_ACF_BLEND_INT = (1 << 4),
+ SI476X_ACF_HIBLEND_INT = (1 << 3),
+ SI476X_ACF_HICUT_INT = (1 << 2),
+ SI476X_ACF_CHBW_INT = (1 << 1),
+ SI476X_ACF_SOFTMUTE_INT = (1 << 0),
+
+ SI476X_ACF_SMUTE = (1 << 0),
+ SI476X_ACF_SMATTN = 0b11111,
+ SI476X_ACF_PILOT = (1 << 7),
+ SI476X_ACF_STBLEND = ~SI476X_ACF_PILOT,
+};
+
+enum si476x_agc_status_report_bits {
+ SI476X_AGC_MXHI = (1 << 5),
+ SI476X_AGC_MXLO = (1 << 4),
+ SI476X_AGC_LNAHI = (1 << 3),
+ SI476X_AGC_LNALO = (1 << 2),
+};
+
+enum si476x_errors {
+ SI476X_ERR_BAD_COMMAND = 0x10,
+ SI476X_ERR_BAD_ARG1 = 0x11,
+ SI476X_ERR_BAD_ARG2 = 0x12,
+ SI476X_ERR_BAD_ARG3 = 0x13,
+ SI476X_ERR_BAD_ARG4 = 0x14,
+ SI476X_ERR_BUSY = 0x18,
+ SI476X_ERR_BAD_INTERNAL_MEMORY = 0x20,
+ SI476X_ERR_BAD_PATCH = 0x30,
+ SI476X_ERR_BAD_BOOT_MODE = 0x31,
+ SI476X_ERR_BAD_PROPERTY = 0x40,
+};
+
+
+int si476x_core_i2c_xfer(struct si476x_core *,
+ enum si476x_i2c_type,
+ char *, int);
+
+
+static int si476x_core_parse_and_nag_about_error(struct si476x_core *core)
+{
+ int err;
+ char *cause;
+ u8 buffer[2];
+
+ if (core->revision != SI476X_REVISION_A10) {
+ err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV,
+ buffer, sizeof(buffer));
+ if (err == sizeof(buffer)) {
+ switch (buffer[1]) {
+ case SI476X_ERR_BAD_COMMAND:
+ cause = "Bad command";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_ARG1:
+ cause = "Bad argument #1";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_ARG2:
+ cause = "Bad argument #2";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_ARG3:
+ cause = "Bad argument #3";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_ARG4:
+ cause = "Bad argument #4";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BUSY:
+ cause = "Chip is busy";
+ err = -EBUSY;
+ break;
+ case SI476X_ERR_BAD_INTERNAL_MEMORY:
+ cause = "Bad internal memory";
+ err = -EIO;
+ break;
+ case SI476X_ERR_BAD_PATCH:
+ cause = "Bad patch";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_BOOT_MODE:
+ cause = "Bad boot mode";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_PROPERTY:
+ cause = "Bad property";
+ err = -EINVAL;
+ break;
+ default:
+ cause = "Unknown";
+ err = -EIO;
+ }
+
+ dev_err(&core->client->dev,
+ "[Chip error status]: %s\n", cause);
+ } else {
+ dev_err(&core->client->dev,
+ "Failed to fetch error code\n");
+ err = (err >= 0) ? -EIO : err;
+ }
+ } else {
+ err = -EIO;
+ }
+
+ return err;
+}
+
+/**
+ * si476x_core_send_command() - sends a command to si476x and waits its
+ * response
+ * @core: si476x_device structure for the device we are
+ * communicating with
+ * @command: command id
+ * @args: command arguments we are sending
+ * @argn: actual size of @args
+ * @response: buffer to place the expected response from the device
+ * @respn: actual size of @response
+ * @usecs: amount of time to wait before reading the response (in
+ * usecs)
+ *
+ * Function returns 0 on succsess and negative error code on
+ * failure
+ */
+static int si476x_core_send_command(struct si476x_core *core,
+ const u8 command,
+ const u8 args[],
+ const int argn,
+ u8 resp[],
+ const int respn,
+ const int usecs)
+{
+ struct i2c_client *client = core->client;
+ int err;
+ u8 data[CMD_MAX_ARGS_COUNT + 1];
+
+ if (argn > CMD_MAX_ARGS_COUNT) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ if (!client->adapter) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ /* First send the command and its arguments */
+ data[0] = command;
+ memcpy(&data[1], args, argn);
+ dev_dbg(&client->dev, "Command:\n %*ph\n", argn + 1, data);
+
+ err = si476x_core_i2c_xfer(core, SI476X_I2C_SEND, (char *) data, argn + 1);
+ if (err != argn + 1) {
+ dev_err(&core->client->dev,
+ "Error while sending command 0x%02x\n",
+ command);
+ err = (err >= 0) ? -EIO : err;
+ goto exit;
+ }
+ /* Set CTS to zero only after the command is send to avoid
+ * possible racing conditions when working in polling mode */
+ atomic_set(&core->cts, 0);
+
+ /* if (unlikely(command == CMD_POWER_DOWN) */
+ if (!wait_event_timeout(core->command,
+ atomic_read(&core->cts),
+ usecs_to_jiffies(usecs) + 1))
+ dev_warn(&core->client->dev,
+ "(%s) [CMD 0x%02x] Device took too much time to answer.\n",
+ __func__, command);
+
+ /*
+ When working in polling mode, for some reason the tuner will
+ report CTS bit as being set in the first status byte read,
+ but all the consequtive ones will return zeros until the
+ tuner is actually completed the POWER_UP command. To
+ workaround that we wait for second CTS to be reported
+ */
+ if (unlikely(!core->client->irq && command == CMD_POWER_UP)) {
+ if (!wait_event_timeout(core->command,
+ atomic_read(&core->cts),
+ usecs_to_jiffies(usecs) + 1))
+ dev_warn(&core->client->dev,
+ "(%s) Power up took too much time.\n",
+ __func__);
+ }
+
+ /* Then get the response */
+ err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV, resp, respn);
+ if (err != respn) {
+ dev_err(&core->client->dev,
+ "Error while reading response for command 0x%02x\n",
+ command);
+ err = (err >= 0) ? -EIO : err;
+ goto exit;
+ }
+ dev_dbg(&client->dev, "Response:\n %*ph\n", respn, resp);
+
+ err = 0;
+
+ if (resp[0] & SI476X_ERR) {
+ dev_err(&core->client->dev, "[CMD 0x%02x] Chip set error flag\n", command);
+ err = si476x_core_parse_and_nag_about_error(core);
+ goto exit;
+ }
+
+ if (!(resp[0] & SI476X_CTS))
+ err = -EBUSY;
+exit:
+ return err;
+}
+
+static int si476x_cmd_clear_stc(struct si476x_core *core)
+{
+ int err;
+ struct si476x_rsq_status_args args = {
+ .primary = false,
+ .rsqack = false,
+ .attune = false,
+ .cancel = false,
+ .stcack = true,
+ };
+
+ switch(core->power_up_parameters.func) {
+ case SI476X_FUNC_FM_RECEIVER:
+ err = si476x_core_cmd_fm_rsq_status(core, &args, NULL);
+ break;
+ case SI476X_FUNC_AM_RECEIVER:
+ err = si476x_core_cmd_am_rsq_status(core, &args, NULL);
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+static int si476x_cmd_tune_seek_freq(struct si476x_core *core,
+ uint8_t cmd,
+ const uint8_t args[], size_t argn,
+ uint8_t *resp, size_t respn)
+{
+ int err;
+
+
+ atomic_set(&core->stc, 0);
+ err = si476x_core_send_command(core, cmd, args, argn, resp, respn,
+ SI476X_TIMEOUT_TUNE);
+ if (!err) {
+ wait_event_killable(core->tuning,
+ atomic_read(&core->stc));
+ si476x_cmd_clear_stc(core);
+ }
+
+ return err;
+}
+
+/**
+ * si476x_cmd_func_info() - send 'FUNC_INFO' command to the device
+ * @core: device to send the command to
+ * @info: struct si476x_func_info to fill all the information
+ * returned by the command
+ *
+ * The command requests the firmware and patch version for currently
+ * loaded firmware (dependent on the function of the device FM/AM/WB)
+ *
+ * Function returns 0 on succsess and negative error code on
+ * failure
+ */
+int si476x_core_cmd_func_info(struct si476x_core *core,
+ struct si476x_func_info *info)
+{
+ int err;
+ u8 resp[CMD_FUNC_INFO_NRESP];
+
+ err = si476x_core_send_command(core, CMD_FUNC_INFO,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+
+ info->firmware.major = resp[1];
+ info->firmware.minor[0] = resp[2];
+ info->firmware.minor[1] = resp[3];
+
+ info->patch_id = ((u16) resp[4] << 8) | resp[5];
+ info->func = resp[6];
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_func_info);
+
+/**
+ * si476x_cmd_set_property() - send 'SET_PROPERTY' command to the device
+ * @core: device to send the command to
+ * @property: property address
+ * @value: property value
+ *
+ * Function returns 0 on succsess and negative error code on
+ * failure
+ */
+int si476x_core_cmd_set_property(struct si476x_core *core,
+ u16 property, u16 value)
+{
+ u8 resp[CMD_SET_PROPERTY_NRESP];
+ const u8 args[CMD_SET_PROPERTY_NARGS] = {
+ 0x00,
+ msb(property),
+ lsb(property),
+ msb(value),
+ lsb(value),
+ };
+
+ return si476x_core_send_command(core, CMD_SET_PROPERTY,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_set_property);
+
+/**
+ * si476x_cmd_get_property() - send 'GET_PROPERTY' command to the device
+ * @core: device to send the command to
+ * @property: property address
+ *
+ * Function return the value of property as u16 on success or a
+ * negative error on failure
+ */
+int si476x_core_cmd_get_property(struct si476x_core *core, u16 property)
+{
+ int err;
+ u8 resp[CMD_GET_PROPERTY_NRESP];
+ const u8 args[CMD_GET_PROPERTY_NARGS] = {
+ 0x00,
+ msb(property),
+ lsb(property),
+ };
+
+ err = si476x_core_send_command(core, CMD_GET_PROPERTY,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+ else
+ return be16_to_cpup((__be16 *)(resp + 2));
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property);
+
+/**
+ * si476x_cmd_dig_audio_pin_cfg() - send 'DIG_AUDIO_PIN_CFG' command to
+ * the device
+ * @core: device to send the command to
+ * @dclk: DCLK pin function configuration:
+ * #SI476X_DCLK_NOOP - do not modify the behaviour
+ * #SI476X_DCLK_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * #SI476X_DCLK_DAUDIO - set the pin to be a part of digital
+ * audio interface
+ * @dfs: DFS pin function configuration:
+ * #SI476X_DFS_NOOP - do not modify the behaviour
+ * #SI476X_DFS_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_DFS_DAUDIO - set the pin to be a part of digital
+ * audio interface
+ * @dout - DOUT pin function configuration:
+ * SI476X_DOUT_NOOP - do not modify the behaviour
+ * SI476X_DOUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_DOUT_I2S_OUTPUT - set this pin to be digital out on I2S
+ * port 1
+ * SI476X_DOUT_I2S_INPUT - set this pin to be digital in on I2S
+ * port 1
+ * @xout - XOUT pin function configuration:
+ * SI476X_XOUT_NOOP - do not modify the behaviour
+ * SI476X_XOUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_XOUT_I2S_INPUT - set this pin to be digital in on I2S
+ * port 1
+ * SI476X_XOUT_MODE_SELECT - set this pin to be the input that
+ * selects the mode of the I2S audio
+ * combiner (analog or HD)
+ * [SI4761/63/65/67 Only]
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *core,
+ enum si476x_dclk_config dclk,
+ enum si476x_dfs_config dfs,
+ enum si476x_dout_config dout,
+ enum si476x_xout_config xout)
+{
+ u8 resp[CMD_DIG_AUDIO_PIN_CFG_NRESP];
+ const u8 args[CMD_DIG_AUDIO_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(dclk),
+ PIN_CFG_BYTE(dfs),
+ PIN_CFG_BYTE(dout),
+ PIN_CFG_BYTE(xout),
+ };
+
+ return si476x_core_send_command(core, CMD_DIG_AUDIO_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_dig_audio_pin_cfg);
+
+/**
+ * si476x_cmd_zif_pin_cfg - send 'ZIF_PIN_CFG_COMMAND'
+ * @core - device to send the command to
+ * @iqclk - IQCL pin function configuration:
+ * SI476X_IQCLK_NOOP - do not modify the behaviour
+ * SI476X_IQCLK_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_IQCLK_IQ - set pin to be a part of I/Q interace
+ * in master mode
+ * @iqfs - IQFS pin function configuration:
+ * SI476X_IQFS_NOOP - do not modify the behaviour
+ * SI476X_IQFS_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_IQFS_IQ - set pin to be a part of I/Q interace
+ * in master mode
+ * @iout - IOUT pin function configuration:
+ * SI476X_IOUT_NOOP - do not modify the behaviour
+ * SI476X_IOUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_IOUT_OUTPUT - set pin to be I out
+ * @qout - QOUT pin function configuration:
+ * SI476X_QOUT_NOOP - do not modify the behaviour
+ * SI476X_QOUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_QOUT_OUTPUT - set pin to be Q out
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_zif_pin_cfg(struct si476x_core *core,
+ enum si476x_iqclk_config iqclk,
+ enum si476x_iqfs_config iqfs,
+ enum si476x_iout_config iout,
+ enum si476x_qout_config qout)
+{
+ u8 resp[CMD_ZIF_PIN_CFG_NRESP];
+ const u8 args[CMD_ZIF_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(iqclk),
+ PIN_CFG_BYTE(iqfs),
+ PIN_CFG_BYTE(iout),
+ PIN_CFG_BYTE(qout),
+ };
+
+ return si476x_core_send_command(core, CMD_ZIF_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_zif_pin_cfg);
+
+/**
+ * si476x_cmd_ic_link_gpo_ctl_pin_cfg - send
+ * 'IC_LINK_GPIO_CTL_PIN_CFG' comand to the device
+ * @core - device to send the command to
+ * @icin - ICIN pin function configuration:
+ * SI476X_ICIN_NOOP - do not modify the behaviour
+ * SI476X_ICIN_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_ICIN_GPO1_HIGH - set pin to be an output, drive it high
+ * SI476X_ICIN_GPO1_LOW - set pin to be an output, drive it low
+ * SI476X_ICIN_IC_LINK - set the pin to be a part of Inter-Chip link
+ * @icip - ICIP pin function configuration:
+ * SI476X_ICIP_NOOP - do not modify the behaviour
+ * SI476X_ICIP_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_ICIP_GPO1_HIGH - set pin to be an output, drive it high
+ * SI476X_ICIP_GPO1_LOW - set pin to be an output, drive it low
+ * SI476X_ICIP_IC_LINK - set the pin to be a part of Inter-Chip link
+ * @icon - ICON pin function configuration:
+ * SI476X_ICON_NOOP - do not modify the behaviour
+ * SI476X_ICON_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_ICON_I2S - set the pin to be a part of audio
+ * interface in slave mode (DCLK)
+ * SI476X_ICON_IC_LINK - set the pin to be a part of Inter-Chip link
+ * @icop - ICOP pin function configuration:
+ * SI476X_ICOP_NOOP - do not modify the behaviour
+ * SI476X_ICOP_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_ICOP_I2S - set the pin to be a part of audio
+ * interface in slave mode (DOUT)
+ * [Si4761/63/65/67 Only]
+ * SI476X_ICOP_IC_LINK - set the pin to be a part of Inter-Chip link
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *core,
+ enum si476x_icin_config icin,
+ enum si476x_icip_config icip,
+ enum si476x_icon_config icon,
+ enum si476x_icop_config icop)
+{
+ u8 resp[CMD_IC_LINK_GPO_CTL_PIN_CFG_NRESP];
+ const u8 args[CMD_IC_LINK_GPO_CTL_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(icin),
+ PIN_CFG_BYTE(icip),
+ PIN_CFG_BYTE(icon),
+ PIN_CFG_BYTE(icop),
+ };
+
+ return si476x_core_send_command(core, CMD_IC_LINK_GPO_CTL_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_ic_link_gpo_ctl_pin_cfg);
+
+/**
+ * si476x_cmd_ana_audio_pin_cfg - send 'ANA_AUDIO_PIN_CFG' to the
+ * device
+ * @core - device to send the command to
+ * @lrout - LROUT pin function configuration:
+ * SI476X_LROUT_NOOP - do not modify the behaviour
+ * SI476X_LROUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_LROUT_AUDIO - set pin to be audio output
+ * SI476X_LROUT_MPX - set pin to be MPX output
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *core,
+ enum si476x_lrout_config lrout)
+{
+ u8 resp[CMD_ANA_AUDIO_PIN_CFG_NRESP];
+ const u8 args[CMD_ANA_AUDIO_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(lrout),
+ };
+
+ return si476x_core_send_command(core, CMD_ANA_AUDIO_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_ana_audio_pin_cfg);
+
+
+/**
+ * si476x_cmd_intb_pin_cfg - send 'INTB_PIN_CFG' command to the device
+ * @core - device to send the command to
+ * @intb - INTB pin function configuration:
+ * SI476X_INTB_NOOP - do not modify the behaviour
+ * SI476X_INTB_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_INTB_DAUDIO - set pin to be a part of digital
+ * audio interface in slave mode
+ * SI476X_INTB_IRQ - set pin to be an interrupt request line
+ * @a1 - A1 pin function configuration:
+ * SI476X_A1_NOOP - do not modify the behaviour
+ * SI476X_A1_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_A1_IRQ - set pin to be an interrupt request line
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+static int si476x_core_cmd_intb_pin_cfg_a10(struct si476x_core *core,
+ enum si476x_intb_config intb,
+ enum si476x_a1_config a1)
+{
+ u8 resp[CMD_INTB_PIN_CFG_A10_NRESP];
+ const u8 args[CMD_INTB_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(intb),
+ PIN_CFG_BYTE(a1),
+ };
+
+ return si476x_core_send_command(core, CMD_INTB_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+
+static int si476x_core_cmd_intb_pin_cfg_a20(struct si476x_core *core,
+ enum si476x_intb_config intb,
+ enum si476x_a1_config a1)
+{
+ u8 resp[CMD_INTB_PIN_CFG_A20_NRESP];
+ const u8 args[CMD_INTB_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(intb),
+ PIN_CFG_BYTE(a1),
+ };
+
+ return si476x_core_send_command(core, CMD_INTB_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+
+
+
+/**
+ * si476x_cmd_am_rsq_status - send 'AM_RSQ_STATUS' command to the
+ * device
+ * @core - device to send the command to
+ * @rsqack - if set command clears RSQINT, SNRINT, SNRLINT, RSSIHINT,
+ * RSSSILINT, BLENDINT, MULTHINT and MULTLINT
+ * @attune - when set the values in the status report are the values
+ * that were calculated at tune
+ * @cancel - abort ongoing seek/tune opertation
+ * @stcack - clear the STCINT bin in status register
+ * @report - all signal quality information retured by the command
+ * (if NULL then the output of the command is ignored)
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_am_rsq_status(struct si476x_core *core,
+ struct si476x_rsq_status_args *rsqargs,
+ struct si476x_rsq_status_report *report)
+{
+ int err;
+ u8 resp[CMD_AM_RSQ_STATUS_NRESP];
+ const u8 args[CMD_AM_RSQ_STATUS_NARGS] = {
+ rsqargs->rsqack << 3 | rsqargs->attune << 2 |
+ rsqargs->cancel << 1 | rsqargs->stcack,
+ };
+
+ err = si476x_core_send_command(core, CMD_AM_RSQ_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting received signal quality information this
+ * command can be used to just acknowledge different interrupt
+ * flags in those cases it is useless to copy and parse
+ * received data so user can pass NULL, and thus avoid
+ * unnecessary copying.
+ */
+ if (!report)
+ return err;
+
+ report->snrhint = 0b00001000 & resp[1];
+ report->snrlint = 0b00000100 & resp[1];
+ report->rssihint = 0b00000010 & resp[1];
+ report->rssilint = 0b00000001 & resp[1];
+
+ report->bltf = 0b10000000 & resp[2];
+ report->snr_ready = 0b00100000 & resp[2];
+ report->rssiready = 0b00001000 & resp[2];
+ report->afcrl = 0b00000010 & resp[2];
+ report->valid = 0b00000001 & resp[2];
+
+ report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->freqoff = resp[5];
+ report->rssi = resp[6];
+ report->snr = resp[7];
+ report->lassi = resp[9];
+ report->hassi = resp[10];
+ report->mult = resp[11];
+ report->dev = resp[12];
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_rsq_status);
+
+int si476x_core_cmd_fm_acf_status(struct si476x_core *core,
+ struct si476x_acf_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_ACF_STATUS_NRESP];
+ const u8 args[CMD_FM_ACF_STATUS_NARGS] = {
+ 0x0,
+ };
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_FM_ACF_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+
+ report->blend_int = resp[1] & SI476X_ACF_BLEND_INT;
+ report->hblend_int = resp[1] & SI476X_ACF_HIBLEND_INT;
+ report->hicut_int = resp[1] & SI476X_ACF_HICUT_INT;
+ report->chbw_int = resp[1] & SI476X_ACF_CHBW_INT;
+ report->softmute_int = resp[1] & SI476X_ACF_SOFTMUTE_INT;
+ report->smute = resp[2] & SI476X_ACF_SMUTE;
+ report->smattn = resp[3] & SI476X_ACF_SMATTN;
+ report->chbw = resp[4];
+ report->hicut = resp[5];
+ report->hiblend = resp[6];
+ report->pilot = resp[7] & SI476X_ACF_PILOT;
+ report->stblend = resp[7] & SI476X_ACF_STBLEND;
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_acf_status);
+
+int si476x_core_cmd_am_acf_status(struct si476x_core *core,
+ struct si476x_acf_status_report *report)
+{
+ int err;
+ u8 resp[CMD_AM_ACF_STATUS_NRESP];
+ const u8 args[CMD_AM_ACF_STATUS_NARGS] = {
+ 0x0,
+ };
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_AM_ACF_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+
+ report->blend_int = resp[1] & SI476X_ACF_BLEND_INT;
+ report->hblend_int = resp[1] & SI476X_ACF_HIBLEND_INT;
+ report->hicut_int = resp[1] & SI476X_ACF_HICUT_INT;
+ report->chbw_int = resp[1] & SI476X_ACF_CHBW_INT;
+ report->softmute_int = resp[1] & SI476X_ACF_SOFTMUTE_INT;
+ report->smute = resp[2] & SI476X_ACF_SMUTE;
+ report->smattn = resp[3] & SI476X_ACF_SMATTN;
+ report->chbw = resp[4];
+ report->hicut = resp[5];
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_acf_status);
+
+
+/**
+ * si476x_cmd_fm_seek_start - send 'FM_SEEK_START' command to the
+ * device
+ * @core - device to send the command to
+ * @seekup - if set the direction of the search is 'up'
+ * @wrap - if set seek wraps when hitting band limit
+ *
+ * This function begins search for a valid station. The station is
+ * considered valid when 'FM_VALID_SNR_THRESHOLD' and
+ * 'FM_VALID_RSSI_THRESHOLD' and 'FM_VALID_MAX_TUNE_ERROR' criteria
+ * are met.
+} *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_fm_seek_start(struct si476x_core *core,
+ bool seekup, bool wrap)
+{
+ u8 resp[CMD_FM_SEEK_START_NRESP];
+ const u8 args[CMD_FM_SEEK_START_NARGS] = {
+ seekup << 3 | wrap << 2,
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_FM_SEEK_START,
+ args, sizeof(args), resp, sizeof(resp));
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_seek_start);
+
+/**
+ * si476x_cmd_fm_rds_status - send 'FM_RDS_STATUS' command to the
+ * device
+ * @core - device to send the command to
+ * @status_only - if set the data is not removed from RDSFIFO,
+ * RDSFIFOUSED is not decremented and data in all the
+ * rest RDS data contains the last valid info received
+ * @mtfifo if set the command clears RDS receive FIFO
+ * @intack if set the command clards the RDSINT bit.
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_fm_rds_status(struct si476x_core *core,
+ bool status_only,
+ bool mtfifo,
+ bool intack,
+ struct si476x_rds_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RDS_STATUS_NRESP];
+ const u8 args[CMD_FM_RDS_STATUS_NARGS] = {
+ status_only << 2 | mtfifo << 1 | intack,
+ };
+
+ err = si476x_core_send_command(core, CMD_FM_RDS_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting RDS status information this command can be
+ * used to just acknowledge different interrupt flags in those
+ * cases it is useless to copy and parse received data so user
+ * can pass NULL, and thus avoid unnecessary copying.
+ */
+ if (err < 0 || report == NULL)
+ return err;
+
+ report->rdstpptyint = 0b00010000 & resp[1];
+ report->rdspiint = 0b00001000 & resp[1];
+ report->rdssyncint = 0b00000010 & resp[1];
+ report->rdsfifoint = 0b00000001 & resp[1];
+
+ report->tpptyvalid = 0b00010000 & resp[2];
+ report->pivalid = 0b00001000 & resp[2];
+ report->rdssync = 0b00000010 & resp[2];
+ report->rdsfifolost = 0b00000001 & resp[2];
+
+ report->tp = 0b00100000 & resp[3];
+ report->pty = 0b00011111 & resp[3];
+
+ report->pi = be16_to_cpup((__be16 *)(resp + 4));
+ report->rdsfifoused = resp[6];
+
+ report->ble[V4L2_RDS_BLOCK_A] = 0b11000000 & resp[7];
+ report->ble[V4L2_RDS_BLOCK_B] = 0b00110000 & resp[7];
+ report->ble[V4L2_RDS_BLOCK_C] = 0b00001100 & resp[7];
+ report->ble[V4L2_RDS_BLOCK_D] = 0b00000011 & resp[7];
+
+ report->rds[V4L2_RDS_BLOCK_A].block = V4L2_RDS_BLOCK_A;
+ report->rds[V4L2_RDS_BLOCK_A].msb = resp[8];
+ report->rds[V4L2_RDS_BLOCK_A].lsb = resp[9];
+
+ report->rds[V4L2_RDS_BLOCK_B].block = V4L2_RDS_BLOCK_B;
+ report->rds[V4L2_RDS_BLOCK_B].msb = resp[10];
+ report->rds[V4L2_RDS_BLOCK_B].lsb = resp[11];
+
+ report->rds[V4L2_RDS_BLOCK_C].block = V4L2_RDS_BLOCK_C;
+ report->rds[V4L2_RDS_BLOCK_C].msb = resp[12];
+ report->rds[V4L2_RDS_BLOCK_C].lsb = resp[13];
+
+ report->rds[V4L2_RDS_BLOCK_D].block = V4L2_RDS_BLOCK_D;
+ report->rds[V4L2_RDS_BLOCK_D].msb = resp[14];
+ report->rds[V4L2_RDS_BLOCK_D].lsb = resp[15];
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rds_status);
+
+int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *core,
+ bool clear,
+ struct si476x_rds_blockcount_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RDS_BLOCKCOUNT_NRESP];
+ const u8 args[CMD_FM_RDS_BLOCKCOUNT_NARGS] = {
+ clear,
+ };
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_FM_RDS_BLOCKCOUNT,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+
+ if (!err) {
+ report->expected = be16_to_cpup((__be16 *)(resp + 2));
+ report->received = be16_to_cpup((__be16 *)(resp + 4));
+ report->uncorrectable = be16_to_cpup((__be16 *)(resp + 6));
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rds_blockcount);
+
+int si476x_core_cmd_fm_phase_diversity(struct si476x_core *core,
+ enum si476x_phase_diversity_mode mode)
+{
+ u8 resp[CMD_FM_PHASE_DIVERSITY_NRESP];
+ const u8 args[CMD_FM_PHASE_DIVERSITY_NARGS] = {
+ mode & 0b111,
+ };
+
+ return si476x_core_send_command(core, CMD_FM_PHASE_DIVERSITY,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_diversity);
+/**
+ * si476x_core_cmd_fm_phase_div_status() - get the phase diversity
+ * status
+ *
+ * @core: si476x device
+ *
+ * NOTE caller must hold core lock
+ *
+ * Function returns the value of the status bit in case of success and
+ * negative error code in case of failre.
+ */
+int si476x_core_cmd_fm_phase_div_status(struct si476x_core *core)
+{
+ int err;
+ u8 resp[CMD_FM_PHASE_DIV_STATUS_NRESP];
+
+ err = si476x_core_send_command(core, CMD_FM_PHASE_DIV_STATUS,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+
+ return (err < 0) ? err : resp[1];
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_div_status);
+
+
+/**
+ * si476x_cmd_am_seek_start - send 'FM_SEEK_START' command to the
+ * device
+ * @core - device to send the command to
+ * @seekup - if set the direction of the search is 'up'
+ * @wrap - if set seek wraps when hitting band limit
+ *
+ * This function begins search for a valid station. The station is
+ * considered valid when 'FM_VALID_SNR_THRESHOLD' and
+ * 'FM_VALID_RSSI_THRESHOLD' and 'FM_VALID_MAX_TUNE_ERROR' criteria
+ * are met.
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_am_seek_start(struct si476x_core *core,
+ bool seekup, bool wrap)
+{
+ u8 resp[CMD_AM_SEEK_START_NRESP];
+ const u8 args[CMD_AM_SEEK_START_NARGS] = {
+ seekup << 3 | wrap << 2,
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_AM_SEEK_START,
+ args, sizeof(args), resp, sizeof(resp));
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_seek_start);
+
+
+
+static int si476x_core_cmd_power_up_a10(struct si476x_core *core,
+ struct si476x_power_up_args *puargs)
+{
+ u8 resp[CMD_POWER_UP_A10_NRESP];
+ const bool intsel = (core->pinmux.a1 == SI476X_A1_IRQ);
+ const bool ctsen = (core->client->irq != 0);
+ const u8 args[CMD_POWER_UP_A10_NARGS] = {
+ 0xF7, /* Reserved, always 0xF7 */
+ 0x3F & puargs->xcload, /* First two bits are reserved to be
+ * zeros */
+ ctsen << 7 | intsel << 6 | 0x07, /* Last five bits
+ * are reserved to
+ * be written as 0x7 */
+ puargs->func << 4 | puargs->freq,
+ 0x11, /* Reserved, always 0x11 */
+ };
+
+ return si476x_core_send_command(core, CMD_POWER_UP,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_TIMEOUT_POWER_UP);
+}
+
+static int si476x_core_cmd_power_up_a20(struct si476x_core *core,
+ struct si476x_power_up_args *puargs)
+{
+ u8 resp[CMD_POWER_UP_A20_NRESP];
+ const bool intsel = (core->pinmux.a1 == SI476X_A1_IRQ);
+ const bool ctsen = (core->client->irq != 0);
+ const u8 args[CMD_POWER_UP_A20_NARGS] = {
+ puargs->ibias6x << 7 | puargs->xstart,
+ 0x3F & puargs->xcload, /* First two bits are reserved to be
+ * zeros */
+ ctsen << 7 | intsel << 6 | puargs->fastboot << 5 |
+ puargs->xbiashc << 3 | puargs->xbias,
+ puargs->func << 4 | puargs->freq,
+ 0x10 | puargs->xmode,
+ };
+
+ return si476x_core_send_command(core, CMD_POWER_UP,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_TIMEOUT_POWER_UP);
+}
+
+static int si476x_core_cmd_power_down_a10(struct si476x_core *core,
+ struct si476x_power_down_args *pdargs)
+{
+ u8 resp[CMD_POWER_DOWN_A10_NRESP];
+
+ return si476x_core_send_command(core, CMD_POWER_DOWN,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+
+static int si476x_core_cmd_power_down_a20(struct si476x_core *core,
+ struct si476x_power_down_args *pdargs)
+{
+ u8 resp[CMD_POWER_DOWN_A20_NRESP];
+ const u8 args[CMD_POWER_DOWN_A20_NARGS] = {
+ pdargs->xosc,
+ };
+ return si476x_core_send_command(core, CMD_POWER_DOWN,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+
+static int si476x_core_cmd_am_tune_freq_a10(struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs)
+{
+
+ const int am_freq = tuneargs->freq;
+ u8 resp[CMD_AM_TUNE_FREQ_NRESP];
+ const u8 args[CMD_AM_TUNE_FREQ_NARGS] = {
+ (tuneargs->hd << 6),
+ msb(am_freq),
+ lsb(am_freq),
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_AM_TUNE_FREQ, args,
+ sizeof(args),
+ resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_am_tune_freq_a20(struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs)
+{
+ const int am_freq = tuneargs->freq;
+ u8 resp[CMD_AM_TUNE_FREQ_NRESP];
+ const u8 args[CMD_AM_TUNE_FREQ_NARGS] = {
+ (tuneargs->zifsr << 6) | (tuneargs->injside & 0b11),
+ msb(am_freq),
+ lsb(am_freq),
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_AM_TUNE_FREQ, args, sizeof(args),
+ resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_fm_rsq_status_a10(struct si476x_core *core,
+ struct si476x_rsq_status_args *rsqargs,
+ struct si476x_rsq_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RSQ_STATUS_A10_NRESP];
+ const u8 args[CMD_FM_RSQ_STATUS_A10_NARGS] = {
+ rsqargs->rsqack << 3 | rsqargs->attune << 2 |
+ rsqargs->cancel << 1 | rsqargs->stcack,
+ };
+
+ err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting received signal quality information this
+ * command can be used to just acknowledge different interrupt
+ * flags in those cases it is useless to copy and parse
+ * received data so user can pass NULL, and thus avoid
+ * unnecessary copying.
+ */
+ if (err < 0 || report == NULL)
+ return err;
+
+ report->multhint = 0b10000000 & resp[1];
+ report->multlint = 0b01000000 & resp[1];
+ report->snrhint = 0b00001000 & resp[1];
+ report->snrlint = 0b00000100 & resp[1];
+ report->rssihint = 0b00000010 & resp[1];
+ report->rssilint = 0b00000001 & resp[1];
+
+ report->bltf = 0b10000000 & resp[2];
+ report->snr_ready = 0b00100000 & resp[2];
+ report->rssiready = 0b00001000 & resp[2];
+ report->afcrl = 0b00000010 & resp[2];
+ report->valid = 0b00000001 & resp[2];
+
+ report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->freqoff = resp[5];
+ report->rssi = resp[6];
+ report->snr = resp[7];
+ report->lassi = resp[9];
+ report->hassi = resp[10];
+ report->mult = resp[11];
+ report->dev = resp[12];
+ report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
+ report->assi = resp[15];
+ report->usn = resp[16];
+
+ return err;
+}
+
+static int si476x_core_cmd_fm_rsq_status_a20(struct si476x_core *core,
+ struct si476x_rsq_status_args *rsqargs,
+ struct si476x_rsq_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RSQ_STATUS_A10_NRESP];
+ const u8 args[CMD_FM_RSQ_STATUS_A30_NARGS] = {
+ rsqargs->primary << 4 | rsqargs->rsqack << 3 |
+ rsqargs->attune << 2 | rsqargs->cancel << 1 |
+ rsqargs->stcack,
+ };
+
+ err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting received signal quality information this
+ * command can be used to just acknowledge different interrupt
+ * flags in those cases it is useless to copy and parse
+ * received data so user can pass NULL, and thus avoid
+ * unnecessary copying.
+ */
+ if (err < 0 || report == NULL)
+ return err;
+
+ report->multhint = 0b10000000 & resp[1];
+ report->multlint = 0b01000000 & resp[1];
+ report->snrhint = 0b00001000 & resp[1];
+ report->snrlint = 0b00000100 & resp[1];
+ report->rssihint = 0b00000010 & resp[1];
+ report->rssilint = 0b00000001 & resp[1];
+
+ report->bltf = 0b10000000 & resp[2];
+ report->snr_ready = 0b00100000 & resp[2];
+ report->rssiready = 0b00001000 & resp[2];
+ report->afcrl = 0b00000010 & resp[2];
+ report->valid = 0b00000001 & resp[2];
+
+ report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->freqoff = resp[5];
+ report->rssi = resp[6];
+ report->snr = resp[7];
+ report->lassi = resp[9];
+ report->hassi = resp[10];
+ report->mult = resp[11];
+ report->dev = resp[12];
+ report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
+ report->assi = resp[15];
+ report->usn = resp[16];
+
+ return err;
+}
+
+
+static int si476x_core_cmd_fm_rsq_status_a30(struct si476x_core *core,
+ struct si476x_rsq_status_args *rsqargs,
+ struct si476x_rsq_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RSQ_STATUS_A30_NRESP];
+ const u8 args[CMD_FM_RSQ_STATUS_A30_NARGS] = {
+ rsqargs->primary << 4 | rsqargs->rsqack << 3 |
+ rsqargs->attune << 2 | rsqargs->cancel << 1 |
+ rsqargs->stcack,
+ };
+
+ err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting received signal quality information this
+ * command can be used to just acknowledge different interrupt
+ * flags in those cases it is useless to copy and parse
+ * received data so user can pass NULL, and thus avoid
+ * unnecessary copying.
+ */
+ if (err < 0 || report == NULL)
+ return err;
+
+ report->multhint = 0b10000000 & resp[1];
+ report->multlint = 0b01000000 & resp[1];
+ report->snrhint = 0b00001000 & resp[1];
+ report->snrlint = 0b00000100 & resp[1];
+ report->rssihint = 0b00000010 & resp[1];
+ report->rssilint = 0b00000001 & resp[1];
+
+ report->bltf = 0b10000000 & resp[2];
+ report->snr_ready = 0b00100000 & resp[2];
+ report->rssiready = 0b00001000 & resp[2];
+ report->injside = 0b00000100 & resp[2];
+ report->afcrl = 0b00000010 & resp[2];
+ report->valid = 0b00000001 & resp[2];
+
+ report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->freqoff = resp[5];
+ report->rssi = resp[6];
+ report->snr = resp[7];
+ report->issi = resp[8];
+ report->lassi = resp[9];
+ report->hassi = resp[10];
+ report->mult = resp[11];
+ report->dev = resp[12];
+ report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
+ report->assi = resp[15];
+ report->usn = resp[16];
+
+ report->pilotdev = resp[17];
+ report->rdsdev = resp[18];
+ report->assidev = resp[19];
+ report->strongdev = resp[20];
+ report->rdspi = be16_to_cpup((__be16 *)(resp + 21));
+
+ return err;
+}
+
+static int si476x_core_cmd_fm_tune_freq_a10(struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs)
+{
+ u8 resp[CMD_FM_TUNE_FREQ_NRESP];
+ const u8 args[CMD_FM_TUNE_FREQ_A10_NARGS] = {
+ (tuneargs->hd << 6) | (tuneargs->tunemode << 4)
+ | (tuneargs->smoothmetrics << 2),
+ msb(tuneargs->freq),
+ lsb(tuneargs->freq),
+ msb(tuneargs->antcap),
+ lsb(tuneargs->antcap)
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_FM_TUNE_FREQ, args, sizeof(args),
+ resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_fm_tune_freq_a20(struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs)
+{
+ u8 resp[CMD_FM_TUNE_FREQ_NRESP];
+ const u8 args[CMD_FM_TUNE_FREQ_A20_NARGS] = {
+ (tuneargs->hd << 6) | (tuneargs->tunemode << 4)
+ | (tuneargs->smoothmetrics << 2) | (tuneargs->injside),
+ msb(tuneargs->freq),
+ lsb(tuneargs->freq),
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_FM_TUNE_FREQ, args, sizeof(args),
+ resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_agc_status_a20(struct si476x_core *core,
+ struct si476x_agc_status_report *report)
+{
+ int err;
+ u8 resp[CMD_AGC_STATUS_NRESP_A20];
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_AGC_STATUS,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+
+ report->mxhi = resp[1] & SI476X_AGC_MXHI;
+ report->mxlo = resp[1] & SI476X_AGC_MXLO;
+ report->lnahi = resp[1] & SI476X_AGC_LNAHI;
+ report->lnalo = resp[1] & SI476X_AGC_LNALO;
+ report->fmagc1 = resp[2];
+ report->fmagc2 = resp[3];
+ report->pgagain = resp[4];
+ report->fmwblang = resp[5];
+
+ return err;
+}
+
+static int si476x_core_cmd_agc_status_a10(struct si476x_core *core,
+ struct si476x_agc_status_report *report)
+{
+ int err;
+ u8 resp[CMD_AGC_STATUS_NRESP_A10];
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_AGC_STATUS,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+
+ report->mxhi = resp[1] & SI476X_AGC_MXHI;
+ report->mxlo = resp[1] & SI476X_AGC_MXLO;
+ report->lnahi = resp[1] & SI476X_AGC_LNAHI;
+ report->lnalo = resp[1] & SI476X_AGC_LNALO;
+
+ return err;
+}
+
+typedef int (*tune_freq_func_t) (struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs);
+
+static struct {
+ int (*power_up) (struct si476x_core *,
+ struct si476x_power_up_args *);
+ int (*power_down) (struct si476x_core *,
+ struct si476x_power_down_args *);
+
+ tune_freq_func_t fm_tune_freq;
+ tune_freq_func_t am_tune_freq;
+
+ int (*fm_rsq_status)(struct si476x_core *,
+ struct si476x_rsq_status_args *,
+ struct si476x_rsq_status_report *);
+
+ int (*agc_status)(struct si476x_core *,
+ struct si476x_agc_status_report *);
+ int (*intb_pin_cfg)(struct si476x_core *core,
+ enum si476x_intb_config intb,
+ enum si476x_a1_config a1);
+} si476x_cmds_vtable[] = {
+ [SI476X_REVISION_A10] = {
+ .power_up = si476x_core_cmd_power_up_a10,
+ .power_down = si476x_core_cmd_power_down_a10,
+ .fm_tune_freq = si476x_core_cmd_fm_tune_freq_a10,
+ .am_tune_freq = si476x_core_cmd_am_tune_freq_a10,
+ .fm_rsq_status = si476x_core_cmd_fm_rsq_status_a10,
+ .agc_status = si476x_core_cmd_agc_status_a10,
+ .intb_pin_cfg = si476x_core_cmd_intb_pin_cfg_a10,
+ },
+ [SI476X_REVISION_A20] = {
+ .power_up = si476x_core_cmd_power_up_a20,
+ .power_down = si476x_core_cmd_power_down_a20,
+ .fm_tune_freq = si476x_core_cmd_fm_tune_freq_a20,
+ .am_tune_freq = si476x_core_cmd_am_tune_freq_a20,
+ .fm_rsq_status = si476x_core_cmd_fm_rsq_status_a20,
+ .agc_status = si476x_core_cmd_agc_status_a20,
+ .intb_pin_cfg = si476x_core_cmd_intb_pin_cfg_a20,
+ },
+ [SI476X_REVISION_A30] = {
+ .power_up = si476x_core_cmd_power_up_a20,
+ .power_down = si476x_core_cmd_power_down_a20,
+ .fm_tune_freq = si476x_core_cmd_fm_tune_freq_a20,
+ .am_tune_freq = si476x_core_cmd_am_tune_freq_a20,
+ .fm_rsq_status = si476x_core_cmd_fm_rsq_status_a30,
+ .agc_status = si476x_core_cmd_agc_status_a20,
+ .intb_pin_cfg = si476x_core_cmd_intb_pin_cfg_a20,
+ },
+};
+
+int si476x_core_cmd_power_up(struct si476x_core *core,
+ struct si476x_power_up_args *args)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].power_up(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_power_up);
+
+int si476x_core_cmd_power_down(struct si476x_core *core,
+ struct si476x_power_down_args *args)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].power_down(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_power_down);
+
+int si476x_core_cmd_fm_tune_freq(struct si476x_core *core,
+ struct si476x_tune_freq_args *args)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].fm_tune_freq(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_tune_freq);
+
+int si476x_core_cmd_am_tune_freq(struct si476x_core *core,
+ struct si476x_tune_freq_args *args)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].am_tune_freq(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_tune_freq);
+
+int si476x_core_cmd_fm_rsq_status(struct si476x_core *core,
+ struct si476x_rsq_status_args *args,
+ struct si476x_rsq_status_report *report)
+
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].fm_rsq_status(core, args,
+ report);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rsq_status);
+
+int si476x_core_cmd_agc_status(struct si476x_core *core,
+ struct si476x_agc_status_report *report)
+
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].agc_status(core, report);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_agc_status);
+
+int si476x_core_cmd_intb_pin_cfg(struct si476x_core *core,
+ enum si476x_intb_config intb,
+ enum si476x_a1_config a1)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+
+ return si476x_cmds_vtable[core->revision].intb_pin_cfg(core, intb, a1);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_intb_pin_cfg);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("API for command exchange for si476x");